Local Database

Hi all, I haven't been to the forum for a while....its good to be back.
I would like to develope a java application that uses a database to store information, the application is not web related (therefore not using servlets).
I want the program to run locally on my machine an access a database running locally on my machine. I am thinking to use Postgres database.
My question is: in order to do this, do i have to install a database server on my machine still? do i still have to install tomcat or resin??? even though its running locally.
Whats the easiest way to do this.
thanks

1) If your application is not web related then you don't need tomcat.
2) If you want to access a database locally on your machine then you need to install a database server.
3) If you have a microsoft os then you should look into MySQL. If you have a Linux box, you might want to look into PostgreSQL.
4) If you need persistance for your application, but not necessarily a database, you might want to look at Prevayler which can be found at http://www.prevayler.org/wiki.jsp
---Anzime

Similar Messages

  • Can i use local database in webdynpro

    Hai,
    I want to store a string in the local database. is it possible to store in local dictionary-->structures.
    using this how cani store , retrieve, update and delete the data in the local dictionary.
    regards,

    Hi Naga,
    It was discussed already:
    store data in database and access
    making database connection
    REG: DATABASE Connection
    Best regards, Maksim Rashchynski.

  • Remote and local databases

    let say that i access a oracle form through the web and that form access data from two distributed databases, then will there be a remote database and local database for the user or all the databases will be remote databases to the user

    In my opinion.
    using local databases -- access tables without DB_link
    using Remote databases -- access tables through DB_link

  • CSCus07365 - should I not use DNS local database at all or I can enable it again after disabling?

    I had an issue with my RV320 that it suddenly stops answering DNS queries from my LAN. I just found out that a new firmware was released last month (v1.1.1.19), and one of its "known issues" is bug id CSCus07365 according to the release notes:
    Sometimes the DNS process is gone and can not reply the DNS request from LAN network.
    Solution: Check if you have enabled DNS local database feature on RV320/325, disable it, and then configure and save the WAN setting page again.
    From that description I am not sure if this is a one-time issue after upgrading (so that I should disable and re-enable it), or if this is still a current issue and it will be better to keep away from DNS local database at all until a new firmware is released.
    Thanks in advance!

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

    Hi,
    I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
    The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
    I followed the upgradation path as recomended.
    Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
    Can anybody pls guide me if anything else to do after the upgradation.
    Thanks & Regards
    Sachi

    Hi Javier,
    First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
    Do we need to do anything in the AD itself?
    Regards
    Sachi
    Steps for ACS upgrade to 4.2 version
    Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
            1)     Take a configuration backup from existing ACS. ACS--->System
    configuration----> ACS Backup
    2)    now if you have  ACS 3.3.2 on server. take backup of the ACS
    3)   Insert the cd or if you have the set up on the system then  Run the setup of ACS 3.3.4. During the process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
    4)     Once you are at 3.3.4, take a backup and keep it handy.
    5)     Run the setup of 4.1.1. During this process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
    6)Once you are at 4.1.1.24 take a backup and keep it handy.
    7)     Run the setup of 4.2. During this process it will prompt you to
    upgrade existing configuration. Make sure you check that option else we will
    loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
    8)     Once you are at 4.2 take a backup and keep it handy. Now run the
    patch 12 and take a backup again.
    9)     Now fresh install 4.2 on your new production server and install patch
    12. Restore the 4.2 patch 12 backup and you should be all set.

  • Is there a way to create a web or simlar link to a local database only?

    So my situation is this
    I have an access 2007 database that stores the names of customers and their usual orders.
    I want to create a link to this database somehow so that anyone on the network can access something like a search page that will be stored on the desktop and it will bring up the results found.
    I don't want people to have to constantly go into the database and do it that way.
    The database has confidential info in it so will never go online only stay as a local database.
    Im unable to install anything on these computers ie PHP, ASP, MYSQL, so it there a way of doing this without either putting the database online or installing another program.
    The scenario I want is this ... Customer calls up we have either a web or form search, we tap in their name or as there's not many records even a drop down box will do and it brings up their details.
    Im open to any other suggestion as to how I can achieve this.

    It sounds to me like you want to "split your database."
    Assuming A10 or higher: Go to the Database Tools tab | Move Data | Access Database and click F1 for more help
    peter n roth - http://PNR1.com, Maybe some useful stuff

  • Remote Database connection error on local database while running a procedur

    Dear Gurus,
    I am trying to run a procedure to grant Select Access to all objects of a schema to all schema but getting below error messages:
    Error report:
    ORA-02019: connection description for remote database not found
    This is on local database and all required privileges have been given to run this procedure but I dont understand why this error is being thrown every time. I am able to fetch all the tables directly (i.e. SELECT object_name FROM user_objects where OBJECT_TYPE IN('TABLE','VIEW','MATERIALIZED VIEW') AND STATUS='VALID')
    Kindly let me know if you have any solution.
    Procedure detail:
    declare
    sqltxt varchar(250);
    cursor course_det is
    SELECT object_name FROM user_objects where OBJECT_TYPE IN('TABLE','VIEW','MATERIALIZED VIEW') AND STATUS='VALID';
    v_objnm user_objects.object_name%type;
    begin
    open course_det;
    loop
    fetch course_det into v_objnm;
    exit when course_det%notfound;
    sqltxt :='GRANT SELECT ON ' || v_objnm|| ' TO public with grant option';
    EXECUTE IMMEDIATE sqltxt ;
    end loop;
    end;
    System detail:
    Oracle 11.2.0.3/Linux 5.3
    Ragards.
    Edited by: 877938 on Mar 20, 2013 12:27 AM

    Hi,
    It seems you are fetching records from one database to other. for that you need to create dblink for that.
    Create dblink first and then try to fetch records using that dblink.
    ORA-02019: connection description for remote database not found
    Cause: An attempt was made to connect or log in to a remote database using a connection description that could not be found.
    Action: Specify an existing database link. Query the data dictionary to see all existing database links. See your operating system-specific Net8 documentation for valid connection descriptors. 

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • FORALL MERGE statement works in local database but not over database link

    Given "list", a collection of NUMBER's, the following FORALL ... MERGE statement should copy the appropriate data if the record specified by the list exists on both databases.
    forall i in 1..list.count
    merge into tbl@remote t
    using (select * from tbl
    where id = list(i)) s
    on (s.id = t.id)
    when matched then
    update set
    t.status = s.status
    when not matched then
    insert (id, status)
    values (s.id, s.status);
    But this does not work. No exceptions, but target table's record is unchanged and "sql%rowcount" is 0.
    If the target table is in the local database, the exact same statement works:
    forall i in 1..list.count
    merge into tbl2 t
    using (select * from tbl
    where id = list(i)) s
    on (s.id = t.id)
    when matched then
    update set
    t.status = s.status
    when not matched then
    insert (id, status)
    values (s.id, s.status);
    Does anyone have a clue why this may be a problem?
    Both databases are on Oracle 10g.
    Edited by: user652538 on 2009. 6. 12 오전 11:29
    Edited by: user652538 on 2009. 6. 12 오전 11:31
    Edited by: user652538 on 2009. 6. 12 오전 11:45

    Should throw an error in my opinion. The underlying reason for not working is basically because of
    SQL> merge into   t@remote t1
         using   (    select   sys.odcinumberlist (1) from dual) t2
            on   (1 = 1)
    when matched
    then
       update set i = 1
    Error at line 4
    ORA-22804: remote operations not permitted on object tables or user-defined type columnsSame reason as e.g.
    insert into t@remote select * from table(sys.odcinumberlist(1,2,3))doesn't work.

  • Replicate some tables from local database server to Remote database sever

    how can i replicate some tables from local database server(Oracle 8.1.7 on windows 2000 server) to a remote database server(Oracle 8.1.7 on Sun Solaris)
    whenever there is some insertion or updation on the table of base(main) database it should get updated to the remote database server
    or
    on time base for example: every 2 hours
    please help me!!!!

    It all depends on waht you are going to do with the data on the remote.
    if tehre are no updates there, creating a simple materialized view on the remote to pull it's data from the local should suffice.
    If there are updates on the remote, you will more than likely want to look into either Multi-master replication, or updatable materialized views.

  • Unable to connect to local database... (what hsould i do ?)

    hi guys,
    I am having this error when i startup my LOCAL database. it says
    ORA-00119: invalid specification for system parameter LOCAL_LISTENER
    ORA-00132: syntax error or unresolved network name 'LISTENER'
    i revert back everything to very very basic.
    now in my
    LISTENER.ORA
    I have only this.
    # listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = szejie)(PORT = 1521))
    IN my TNSNAMES.ORA
    i have got this,
    LISTENER =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = szejie)(PORT = 1521)
    IN MY pfile or SPFILE, i have got this
    *.local_listener='LISTENER'
    WHEN I type STARTUP in SQLPLUS, i still got this error
    SYS@orcl on 07-MAR-09> startup
    ORA-00119: invalid specification for system parameter LOCAL_LISTENER
    ORA-00132: syntax error or unresolved network name 'LISTENER'
    WILL PMON, automatically register my ORCL service with the the LISTENER ?
    What should i do ?
    Please help thanks.
    Best Regards,
    Noob

    Hello,
    Are you trying to register different port than default port 1521?
    Do this or take local_listener completly out of your pfile and try with out
    Edit your sqlnet.ora and add the value of NAMES.DEFAULT_DOMAIN to the alias in the tnsnames.ora:
    set the domain to "world"
    *sqlnet.ora:*
    NAMES.DEFAULT_DOMAIN=world
    init.ora:
    LOCAL_LISTENER=LISTENER
    In order to resolve this issue with LISTENER, it is necessary to add the domain "world" to the tnsnames.ora file entry
    Or Edit init.ora file and remove loca_listener from it.
    sqlplus "/as sysdba"
    sql> startup nomount pfile='/path_to_pfile/init.ora'; -- it will process all the init.ora parameter and let you know if you have to resolve more
    If successfully processed
    sql> alter database mount;
    sql> alter database open;
    Once successfully opened, then shutdown it down
    sql> shutdown immediate;
    sql> create spfile from pfile='/path_to_pfile/init.ora';
    sql>startup;Regards

  • Local Database, TNS Names & ORA-12541: No Listener

    I am trying to get IFS working on our new Windows 7 machine and the entire department is scratching it's head right now.
    I have gotten Oracle 11.2.0.1 installed and finally being seen by the ODBC thanks to the past threads on the forum mentioning the System Environment Variable. However, now I need to be able to get the program to sync the information that I can pull from "MPRDSP6", the one working ODBC connection right now.
    In the past with Oracle XE we had the following in our TNS Names file:
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = COMPUTER.company.local)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    The XE was created whenever Oracle XE was installed and we just added in our MPRDSP6 at the end of the TNS Names file. This was what we used when making the local copy for our personell that would travel and need access to the database.
    However, with Oracle 11.2.0.1, there was no TNS Names file whenever it installs and I had to create it --> Inputting our XE entry and the other, MPRDSP6.
    Upon trying to 'Test Connection' in the ODBC screen I get:
    Unable to Connect
    SQLState=S1000
    [Oracle][ODBC][Ora] ORA-12541: TNS:no listener
    Whenever I try to sync the MPRDSP6 with the local copy of it (named local_db), I am getting an error from the program saying:
    Could not find the Local Oracle Data Folder. Please make sure your Local Oracle is running and that you have set the Local Database Creator.
    I am assuming this is simply because there is actually no database in existance: it is just in the TNS Names.
    I am Running Windows 7 x64
    Forgive me if this is a very simple fix as I am completely new to the world of Oracle.
    Thanks in advance for any help!

    Having the same issue, trying to connect IFS Sales and Marketing. In my case, I am using Oracle Express 10g, Windows 7 32-bit. My ODBC DSN can find the "host" server, but does not seem to find the local Oracle Express instance.

  • Local Database not accessable from enterprize manager console

    Hi all .. i have a strange problem, please help
    i hv installed oracle 9i on my pc. it is linked with a db server and local database (for scott schema) is also installed on pc. with oracle enterprise manager console i have been, and want to access both the databasses.(db server and local)
    i can access the db server database as sys: attributes are ..
    host: 10.4.34.59
    port: 1526
    sid: grid59
    attribs for local db
    host: e5687g7665
    port: 1523
    sid: ora123
    both dbs are accessable from sql plus but when i write scott, tiger on console, it says 'no listener'.... on oracle net manager i hav already added the address for local pc db.
    thanx in advance, please help

    Ok i have removed the ip address of remote db from listener ... now the complete pic of tnsname and listener is as under butttttttt.....
    :( the problem is still there ... my OEM console connects to remote db as 'sys as sysdba' but not local db as 'scott/tiger'...
    # TNSNAMES.ORA Network Configuration File: G:\oracle\ora92\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    GRID31_10.4.34.59=
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.4.34.59)(PORT = 1526))
    (CONNECT_DATA =
    (SID = grid59)
    (SERVER = DEDICATED)
    ORA123 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = e8530e94179)(PORT = 1523))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ora123)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    INST1_HTTP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = e8530e94179)(PORT = 1526))
    (CONNECT_DATA =
    (SERVER = SHARED)
    (SERVICE_NAME = MODOSE)
    (PRESENTATION = http://HRService)
    # LISTENER.ORA Network Configuration File: G:\oracle\ora92\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST =e8530e94179)(PORT = 1523))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = G:\oracle\ora92)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = ora123)
    (ORACLE_HOME = G:\oracle\ora92)
    (SID_NAME = ora123)
    )

  • Local database connection

    I am using developer 3.0 on the NT server machine, with oracle 8
    I want to connect with my local database which step i need to take.
    please help me in detail

    On NT using a new tns_alias works. In your tnsnames.ora file create a new entry for a TCP connection :-
    host=<ip address of your NT machine>
    sid=<e.g. ORCL>
    port=1521
    Next create a JDBC connection using this tns_alias. Avoid using beq... or 127.0.0.1.

  • Local Database access

    simple idea, impossble method.
    I am training to allow acces to a local database either through Flash, Captivate or other application. The only issues are i need to do it without internet access or the executable being installed on user machine.
    So unless im an missing something, that rules out AS3, Javascript ( as i cannot rely on all user having a virtual server to run php) or use of Abode Air.
    If there is a way or something that i am completey over looking please tell me.

    apg wrote:
    Where does the lag occur?  In the original post you say it's after
    When I initiate pacman -Syu, during the "Synchronizing package database..." dialogue it lags for way too long.
    but then later you say
    Typically that dialogue lasts for like half a second before going straight to the mirror. This lags for about 15-20 seconds or so.
    I'm referring to the same "Synchronizing package database..." dialogue. I'm watching the internet monitor to see if during that time its pinging the mirrors, but there is no internet activity for a good while. Which suggests it could be related to a lag in accessing the local database on my desktop.
    rgedit: I should be more specific. Typically the Synchronizing package database dialogue would take maybe .5 of a second but since about three days ago it is taking much longer. Even after changing the mirrorlist (even switching the top mirror in the mirrorlist file) and issuing the "pacman-optimize && sync" command I still get the same results.
    Last edited by rg_arc (2014-11-07 21:42:39)

  • Synchronizing local database and server database

    Hi,
    I am working on an application where users store information on their laptops in a local database. Once a day, synchronizing has to take place with the server database. The clients will send their mutated data to the server and the server will send its mutated data, e.g. changed item file.
    The choice of database is Mysql for the laptop, and server resides on AS400, so DB2 is the platform.
    I am wondering what techniques could be used to accomplish this. Should it be done by sql or via text files? Through a socket or something else?
    Does anyone have an idea what the best approach is for this matter?
    And if possible, some sample code would be very much appreciated.
    Thanks in advance.

    Hi,
    There are numerous solutions to this. I have worked on a similar project a couple of years ago. The plan is as follows:
    1. A java client is run on the laptop (user) which connects to the remote server on calls a procedure passing the localdata as the parameter.
    2. the server parses the local data and updates itself and returns the updated data to the client.
    The main considerations:
    1. Connectivity: Connecting via internet to the server tunnelling through firewall or VPN ( I have no adequate knowledge on this).
    2. The amount of data transfer. I was working on relatively less transactional data and hence the connection thru a dial up was not a problem.
    3. The frequency of this operation. TO me it was once a day process, and hence I scheduled it during vee hours when the network was relatively free.
    This is all my thoughts about the scenario. Any comments and suggestions are welcome.
    Cheers,
    Sekar

Maybe you are looking for