Location String Cell info message

Hi all,
i want to get location string cell info display message from j2me application.. Can anybody help?
Umer
http://www.umerrasheed.com/

Umer wrote:
location string cell info display messageWhat would that be? Anyway, whatever it is, you probably won't be able to get it from J2me, and definateny not if you want to have it working on any j2me device.

Similar Messages

Getting cell info via a J2ME application

Hi All,
I want to get the cell info i.e. Location String of the BTS, that gets displayed on the mobile phone. Is there any method by which I can get this information in to my J2ME application.
Regards,
Ashish

Just a guess, as I didn't try it yet. But I'm interested on the subject myself, and I think you need the Location API. Try googling for "j2me location api" or take a look at this:
http://www.lbszone.com/index2.php?option=com_content&do_pdf=1&id=176

To get selected cell info in table for WDA.

i'm developping in netweaver2004s.
a view has a table and a button.
another view has input fields.
i want to get cell info(selected field name not value)
so i use that info in another view.
i want to know same command 'GET CURSOR' in WDA.
please let me know that method.

Hi,
You can specify the importing parameter ID as type string in the action handler of the button. It will contain the ID of the button.
Best regards,
Thomas

How to switch off 'Cell Info' in Lumia 925

I recently bought Lumia 925. I am getting constsnt messages pertaining to 'Cell Info'. They keep on appearing once in every few seconds & pile up in a huge number. You can not make a call unless you acknowledge all of them, which takes huge time, alternatively I have to switch the phone off & on & make a call after re-boot!!
I was using Nokia E 63 earlier. It had a setting facility for 'Cell Info' on or off. I do not find any setting facility for 'Cell Info' in Lumia 925.
Please guide me how to set the Cell Info off, or I will have to discard this Lumia 925

Thanks everybody for the suggestions!
a) I tried with SIM of other service provider : There were no troublesome flash messages. b) I contacted my service provider: Airtel: After trying for tremendous patience with support number 121, somehow I could convey the message about what was happening. My call was transferred to a senior person, who promised me that these 'Flash' messages would stop in half an hour. It did not happen. Once again through 121, once again the promises, nothing happens. I personally visited Airtel support centre. Again nothing happens. c) I tried my old E 63 & switched off Cell Info with the same SIM. I am not able to use Lumia 925 because of Flash messages accumulating every few seconds.
Conclusions: I have to change my service provider Or Phone Or Both. – Now I may go for the last option with frustrations.

How to get the cell info?

You all know that, on our mobile we used to get the cell info ( Tower Name ). How to access that in our J2ME application?
John

Hello txflwr48! I regret the difficulties you've been having while activating your new phone. I'd love to help, but I recommend that we take our conversation to direct message instead of here in the public forum. If you have not yet gotten your device activated, please follow these steps to follow my handle (DionM_VZW) send me a direct message: http://vz.to/1gBiqkv
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer. This happens with mp3 and mp4 and just wav files. Some audio are accepted, most are not. I get that codec is not installed error message, too.

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

Using Cell Info Display in MIDlets

How can I access the " Cell Info Display " provided by GSM service provider from our MIDlets to get some location idea from Nokia Series 40 or 60 Mobile Handsets ?
Without using Locational API's, is their any Native mathods aceesable for this, provided by any Nokia ?

Well, that's a very popular question.
What i have found until today is summarized below.
1-) No, there are no methods for getting Cell ID or Local Area Network. Most provider's don't provide it (intentionally). Some Motorola phones accept a call like System.getProperty("phone.cid") or System.getProperty("Siemens.CID")
2-) I suggest you use C++ if your phone supports symbian. There is not a standar way, but using etelcom Apis you can get the Network information.
Look for more details on official nokia forums.
3-) Good luck, and tell me if you could manage to finish your app.

Cell Info Display option in iPhone

Hi, I am using iPhone 5. I need to know that 'do we have an option to Display Cell Info like we do have in Nokia handsets'. This will display the real time tower location info on the screen. This information should be displayed everytime handsoff occurs and this should work without opening any external installed app. Thanks.

09-Sep-2008 04:21 AM
engshiraj wrote:
Thank you it_is_me!
What you had written is correct, when selected GSM only it displays the cell info.
However, in Sri Lanka, where I live, the operators are using GSM and UMTS in a complementary fashion that when you put on to dual mode the coverage is high.
I am subscribing to two operators, Dialog and Mobitel. In the Dialog network even if you put to dual mode it displays the cell info. This happenedwith Mobitel network only.
Anyway, thank you very much for the information.
You are welcome , also bear in mind that cell info display that can be activated in E71 is not only 3G , it's 3.5G and this could make difference when it comes to network services .
citation needed .

Cell Info Display

Hey. I have an n8. When i turn on the cell info display. Where does it display?

Normally it is displayed at the place where your active Profile is displayed ...
Not sure where are you located..but here in India the Cell Info Displaye just comes on only when the screen is activated from the standby mode..and it remains hardly for a second..then it displays the active Profile..

Avoid Info messages from Acrobat when open broken PDF document

I'm using Adobe SDK to check and fix a bunch of PDF files
Dim avDoc As AcroAVDoc = Nothing
    Dim pdDoc As CAcroPDDoc = Nothing
    Try
        avDoc = New AcroAVDoc()
        If (avDoc.Open(sourceFile.FullName, String.Empty)) Then
            pdDoc = avDoc.GetPDDoc()
            RemoveIfExists(destinationFile)
            CreateIfNotExits(New DirectoryInfo(destinationFile.DirectoryName))
            pdDoc.Save(3, destinationFile.FullName)
            pdDoc.Close()
            avDoc.Close(1)
            Return True
        End If
        Return False
    Catch generatedExceptionName As Exception
        Me.logger.Error(String.Format("Error while converting {0} to {1}. The error message: {2}", sourceFile.FullName, destinationFile.FullName, generatedExceptionName.Message))
        Me.logger.Fatal(generatedExceptionName.StackTrace)
        Return False
    Finally
        If (avDoc IsNot Nothing) Then
            avDoc.Close(1)
        End If
        If (pdDoc IsNot Nothing) Then
            pdDoc.Close()
        End If
    End Try
But when I try to open PDF that can't be opened for some reason the info message appeares
How to avoid this?

Open the document first as a PDDoc, then convert to an AVDoc. Use an error
handler to catch the error that gets thrown by the Open call when the file
cannot be opened.
pdDoc.Open("c:\test\dummy.pdf")
pdDoc.OpenAVDoc ("")
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com

Retrieve GSM cell info

Is it possible to retrieve the current GSM cell info with a MIDP application running on a mobile phone?
As a reference, take a look at miniGPS that runs as a native Symbian application (http://www.psiloc.com/?id=prod&nrp=44)

Regarding the discussion you have some time ago... I have never programmed a midlet but on the other hand I would like to develop a midlet that retrieves handset information and displays it in a way such as the "old" Nokia net monitor (the locked menu). The mobile is not a GPS device, but performs or receives an number of measurements or newtork paramaters such as the signal strength, the signal quality, the timing advance, BCCHs lists, offset values etc. I would like to know if we can have access to this information (through the Location API?) in order to process and display it accordingly as it is very difficult or impossible to find an midlet application that acts like a "network monitor". For example, the mobile displays the signal strength in the form of five bars. Hence, it is already capable of processing the measured in dBm signal strength value. Is there any news about that functionality during this year?

How do I locate another cell phone with my iphone?

how do I locate another cell phone with my iphone?

you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

Cell Info Display Problem

Past 2 days , my Nokia N71 cell info display gets stuck only showing one area or doesn't show at all, even though moving to another area doesn't change. To update cell info display i need to restart my phone or i need to go settings then i select cell info display then change to off then again on. But i have also Nokia 5700 XM but it doesn't face the same problem and it is also subscribed to same network as n71.
my N71 fimware is V 2.0642.1.05
Please someone give the solution to the problem.
Best Regards

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

How do I copy an entire string of text messages to email?

I want to save a long string of text messages and export to email.
On first try I can press "edit" select a few messages (worked for up to 14) and press "forward" to get them into email
How do I copy the whole lengthy string of many texts?
The copy/paste function would be tedious and take forever.
On my iPhone, it allows one transfer, then no more will be allowed unless I reboot, then only one allowed again.
Is there an easy way to load ALL texts (pref
with time/date stamps)?
Thank You

Press and hold on a message, tap More > Select the messages you want > Tap the arrow > copy everything out of the new message that appears

Problem in copy a string to a message parameter

Hi all,
I have a problem in copy a static string into a message as its parameter.
I use the default function in creating the copy rules...
<copy xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
     <from expression="string(WS1-PSC4-KUY2)">
     </from>
     <to variable="geo_in" part="parameters" query="/ns0:GetLocationByIP/ns0:LicenseKey"/>
</copy>
as the string is a liscence key to use this web service.
However, the string is not copied to anywhere of the outgoing message.
If I use the default type 'literal' and copy to the variable parameter,
it looks like this...
<copy xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
     <from>
                              WS1-PSC4-KUY2
                    </from>
     <to variable="geo_in" part="parameters" query="/ns0:GetLocationByIP/ns0:LicenseKey"/>
</copy>
it gives me an error...
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error]: Element 'from' must have no character [children], because the types content type is element-only.
[bpelc] [Description]: in line 43 of "C:\eclipse\workspace\ip_locate\ip_locate.bpel", Element 'from' must have no character [children], because the types content type is element-only..
[bpelc] [Potential fix]: .
[bpelc] .
Could anybody give me a hint on what's going wrong?

This is my actual code
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Locale;
public class TestingDate {
      * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          String dateFormat="EEEE, MMM d h:mm a";
          Date test=new Date(2007,0,19, 19, 31);
          System.out.println(" original date is "+test);
          String stringResult=DateToString(test,dateFormat);
          System.out.println("Date to string is "+stringResult);
          Date dateResult=stringToDate(stringResult,dateFormat);
          System.out.println(" String to date is "+dateResult);
          String stringResult2=DateToString(dateResult,dateFormat);
          System.out.println(" Date to string is "+stringResult2);
public static String DateToString(Date test, String dateFormat) {
         String result = null;
         try {
              DateFormat myDateFormat = new SimpleDateFormat(dateFormat);
                 result = myDateFormat.format(test);
                 //System.out.println(" reslut date is "+result);
          } catch (Exception e) {
               System.out.println(" Exception is "+e);
          return result;
public static Date stringToDate(String strDate,String dateFormat1){
     Date result1=null;
     try {
          DateFormat myDateFormat = new SimpleDateFormat(dateFormat1);
          result1=myDateFormat.parse(strDate);
     catch(Exception e){
          System.out.println(" exception is "+e);
     return result1;
}I am facing problem in getting the actual date. Please suggest the solution.

Location String Cell info message

Similar Messages

Maybe you are looking for