Locked printing feature on Ricoh printers

Hello.
Does anybody know how can the "locked printing" or "hold printing" feature of Ricoh printers be enabled when printing from SAP applications?
This feature works fine from non-SAP applications: one can set a password for his print job, and then the printout is retained into the printer until the password is entered in the printer panel.
But all print jobs sent from SAP are directly printed.....
Thanks a lot for any suggestion.
Kind regards
Dino

Read,
http://help.sap.com/saphelp_nw70/helpdata/en/c1/d4ea3bb5af9112e10000000a11402f/content.htm
I thinks its worthy to give it a go. Printer in the Print Server should be enabled to use password protected printing.
Regards
Juan

Similar Messages

Lock "Print & Fax" Sys Preference user can still add printers, why?

lock "Print & Fax" Sys Preference user can still add printers, why?

I should add that, I click the lock icon and it shows locked, but the + sign to add a printer is not greyed out and still allows printer drivers to be installed. It then allows the printer driver to be deleted. I have tried quiting System Preferences and rebooting the system and still have the same results.
Pat

Problems with Ricoh printers.

Hello,
I have installed a ONPLUS agent in a network and where the device is connected to the network the Ricoh SP 5100N printers becomes unreachables in the network. It seems that the printers locks.
Somebody knows this issue?
Regards,
Vicente Ilerbaig.

Vicente,
Shot in the dark here. If you're not using SMB Discovery on the ON100, you might consider turning that off. Shouldn't be an issue since it's a printer but the perfect set of circumstances might trigger some sort of security protocol or preventative measure on the Ricoh to self preserve. Another option might be to turn off the NetBIOS Discovery in the ON100. Though this will deminish the value of OnPlus it might help in troubleshooting down the root cause if it does remedy it. Both can be turned off by drilling into the ON100 for the site in OnPlus, selecting Device Options and unchecking the respective boxees. For troubleshooting purposes I would recommend doing one at a time. If you're not using the SMB Discovery, I would recommend turning it off by default to prevent getting security failures on Windows devices with the source of ON100.
Questions
If you remove the ON100 from the network and restart the Ricoh printers, do they go back to working without issue?
If so, when you put the ON100 back on the network, how long does it take before they become unreachable again?
As well, when you look in OnPlus, did the ON100 detect them and if so what did it determine the devices to be?

How do I set the default print margins for ALL printers in mozilla.cfg

How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

How Do i disable ""enable advance Printing features on windows server 2008 ""

Hi ,
I have a windows server 2008 which is used as a terminal server . Users at remote locations log on to this server via "" DYNDNS"" to user our ERP and company files. We use ""DOT MATRIX PRINTERS "" to print . As we all know that ""enable advance
printing feature"" is checked by default on windows server 2008 the format of our ""DOT MATRIX PRINTOUTS "" CHANGE which creates a big mess.
I would like to know if there is any way where i can disable this feature permanently.

In previous operating systems, that setting was for designed for disabling and enabling GDI rendering on the server. Since you are using a TYPE 4 print driver, there is no GDI rendering and thus this setting is not configurable.
If you would like to change this setting, you will need to use a TYPE 3 print driver that does not use XPS rendering. Then the previous configuration methods you were using will work.
Alan Morris Windows Printing Team

New print driver impacted existing printers - why?

Hi friends,
Today I added a new driver to our print server which I have done many times before, only this time in adding the new driver, all other printers of the same manufacturer (Canon) stopped working, with the device on everyone's computer showing "Driver
update needed".
The new driver was for an iDV-ADV C5250. The printers which stopped working are all C5051's. The driver was added but at this point, no other action was taken, the driver was not used for a printer (hardware hasn't arrived yet) so the very simple step of
adding a new driver in preparation for a new printer causes a major issue.
To resolve it on the Windows Server 2008 R2 print server, I selected any one of the existing Canon printers and set the driver to the new driver I added. Of course this did NOT work however then setting the driver back to what it was originally did resolve
the issue... kind of. ALL users were then required to delete and re-add the printer(s) on their computers. You can see this was not a popular fault.
Although I resolved it, I really want to understand why this occurred. Can anyone help? I really need to make sure this doesn't happen again. I thought maybe printer isolation might help but you can't set a driver to isolated until after it's added can you?
Thanks.

Hi Norton_San,
Based on your description, I understand that you add a new driver for iDV-ADV C5250 in printer server. However,
this operation affected all other C5051 printers (stop working). If anything I misunderstand, please don’t hesitate to let me know.
When an administrator updates a printer driver on a shared print server, the Point and Print feature automatically
updates printer drivers from the print server to a client computer. Some printers may share driver files across several printer models or across a family of printers. An update to one of these shared driver files will cause client computers to update the drivers
for any device that depends on the updated files.
Hope this helps.
Best regards,
Justin Gu

Lost Printer Features Pane for HP LaserJet 4050 and Color LaserJet 4550

Hello,
I am trying to restore the Printer Features Pane for 2 different Hewlett-Packard printers we have connected to our LAN.
The Printers Features Pane is available on several of our older iMacs but NOT several of the newest iMacs just recently installed.
After doing some reading in the discussion forum I thought this was due to an erroneous PPD file and replaced both PPD files on the new iMac (with the absent Printer Feature Pane) with the PPD files copied from the old iMac (with the correctly functioning Printer Feature Pane) . I actually copied the PPD files into both of the following locations:
• /Library/Printers/PPDs/Contents/Resources/en.lproj
• /System/Library/Printers/PPDs/Contents/Resources/en.lproj
Unfortunately this did not work even when i deleted the old printer, replaced the old PPD files with the new ones (actually replaced the new ones with the older ones from the previous iMacs on which the Printer Features Pane was working as anticipated), restarted the machine and then added the printer selecting the correct PPD file. All machines are running X.4.10
I am sure this is a simple fix that i am just overlooking but really need to get back the option of printing to the "Letterhead" tray of our printers.
Any suggestions are appreciated.
Thanks
Mike

Paul,
Below is the best I can do to portray the visual appearance of the print dialog boxes for
Computers that DON'T provide the Printer Features option:
...............................Print
Printer: HP LaserJet 4050 Series
Presets: Standard
Menu Options: Copies & Pages
........................Layout
........................Scheduler
........................Paper Handling
........................ColorSync
........................Cover Page
........................Error Handling
........................Paper Feed
........................Summary
and for
Computers that do provide the Printer Features Option:
...............................Print
Printer: HP LaserJet 4050 Series
Presets: Standard
Menu Options: Copies & Pages
........................Layout
........................Scheduler
........................Paper Handling
........................ColorSync
........................Cover Page
........................Error Handling
........................Paper Feed
........................Finishing
........................Image Quality
........................Printer Features
........................Summary
and for
Computers that do provide the Printer Features Option
After selecting Printer Features from the pull down menu:
...............................Print
Printer: HP LaserJet 4050 Series
Presets: Standard
...............................Printer Features
Media Type: None
....................Plain
....................Preprinted
....................Letterhead
....................Transparency
....................Prepunched
....................Labels
....................Bond
....................Recycled
....................Color
....................Rough
....................Card_Stock
I wish I could attach some screen shots as they are usually my best way to convey the visual appearance of the interface. But hopefully the information above will suffice.
The following is an extract from the PPD for the LaserJet 4050 (same file on both machines that display and don't display a printer features option) that appears to be the salient area of the file for dealing with this functionality. :
*%==========================================
*% Media Type
*%=========================================
*OpenUI *MediaType/Media Type: PickOne
*OrderDependency: 20 AnySetup *MediaType
*DefaultMediaType: None
*MediaType None/None: "
<</MediaType null>> setpagedevice"
*End
*MediaType Plain/Plain: "
<</MediaType (Plain)>> setpagedevice"
*End
*MediaType Preprinted/Preprinted: "
<</MediaType (Preprinted)>> setpagedevice"
*End
*MediaType Letterhead/Letterhead: "
<</MediaType (Letterhead)>> setpagedevice"
*End
*MediaType Transparency/Transparency: "
<</MediaType (Transparency)>> setpagedevice"
*End
*MediaType Prepunched/Prepunched: "
<</MediaType (Prepunched)>> setpagedevice"
*End
*MediaType Labels/Labels: "
<</MediaType (Labels)>> setpagedevice"
*End
*MediaType Bond/Bond: "
<</MediaType (Bond)>> setpagedevice"
*End
*MediaType Recycled/Recycled: "
<</MediaType (Recycled)>> setpagedevice"
*End
*MediaType Color/Color: "
<</MediaType (Color)>> setpagedevice"
*End
*MediaType Rough/Rough: "
<</MediaType (Rough)>> setpagedevice"
*End
*MediaType CardStock/CardStock: "
<</MediaType (Card Stock)>> setpagedevice"
*End
*?MediaType: "
save
currentpagedevice /InputAttributes get dup
/Priority get
0 get get
/MediaType get
(Card Stock) anchorsearch
{pop pop (Card_Stock)} if
= flush
restore
*End
*CloseUI: *MediaType
I don't know if it helps you to know that the Printer Features option did work on my current G5 tower, but following an erase and install that functionality has been lost.
Thanks for your ongoing assistance with this problem.
Mike

No "Fiery Features" with latest driver from Canon only "Printer features".

No "Fiery Features" with latest driver from Canon only "Printer features". iRC5235's using 'OSX installer PKG'. Installation completes successfully. Can successfully add the printer(s). Just cannot access the "Fiery Features" just "Printer Features". Other users are working fine. The driver is "Canon iR-ADV C5200s-B2 PSV10US". Already have removed, restarted and reinstalled numerous times - no progress. It should be noted that this user may print to the devices, just cannot access any of the "Fiery features" which are desired. Any thoughts? Thank you in advance for your assistance.

If the user is only getting Printer Features, then it would suggest that the wrong PPD is being selected when the printer is being added. For example, the PPD's for the internal Canon board will show Printer Features in print dialog. So while you mention the B2 driver is being used, are you sure it was selected when the print queue was created?
To check, you can open System Information (Applications > Utilities) and select Printers in the left column. Then in the top right pane, select the iR ADV C5235 with the B2 attached. The bottom right pane will give information about the print queue. The entry PPD will show which PPD is being used and it should show as you have shown above, ie "Canon iR-ADV C5200s-B2 PSV10US".
If the correct PPD was selected then another possible cause is a problem with the Fiery Features plugin. Via Finder, navigate to
/Library/Printers/Canon/PS3/PDEs/EF005626
and check that you have the file "EF005626(FF).plugin". This is the Fiery Feature plugin. If it is present, then maybe this user is having access issues to this folder/plugin.

Secure Print Feature needed

Will the eprint center offer a secure print feature that will email a user a release code to enter into a computer that the printer is connected to which would work as a sort of print release station. I know your main goal is not to have the printer connected to computers at all, but in some cases it is needed. In my environment I would like to offer your service but a lot of what my users will print from their devises is for eyes only and the job can not just print right when it is sent for anyone to pick up off the printer. I see cases where print jobs would be sent from miles away and not picked up for hours. I need a way to "hold" the print job until the correct user is in front of the printer. I know the enterprise level has this feature as well as Printeron.net, but we are small and do not have the budget for either the servers needed for enterprise level or the high yearly per printer usage fees of Printeron.net. Your new ink jets that currently have eprint and hopefully your future small to medium LaseJets will have this as well. It would be good to purchase the printers and use this free service after the purchase.

Hi all!
This could be provided with a "cloud-based" service like ePrint or a printer with larger memory, but would require the printer to have a keypad of some sort, whether as an actual numeric keypad or a virtual keypad on a full touchscreen. Fax-enabled printers would typically have the keypad because of their need to allow users to dial fax numbers. On the other hand, a printer with a USB type-A socket that is typically used for USB memory keys or PictBridge applications could use this socket for a "Human Interface Device" peripheral like a USB-connected add-on numeric keypad. The same printer would also have to be equipped with a full display of some sort rather than just "idiot lights" in order to show "code-entry" prompts.
With regards,
Simon Mackay
http://homenetworking01.info

My MacBook Air won't print to my Ricoh network printer

MacBook Air running Maverick 10.9.5 won't print to network Ricoh Aficio MP c3500 printer. I've deleted, reinstalled, updated drivers - any ideas?

Have you sought help from Ricoh's tech support? Did you check for a newer driver for your model?
OS X- Printer and scanner software available for download
Printers not behaving? Reset them and start from scratch | MacIssues
Troubleshooting printer issues in OS X - Apple Support

Using the PRINT feature after clicking "flower" app - what printer

I have the 3gs Iphone, it says Print as an option when I click the FLOWER icon to view a specific photo. I click on the "PRINT" button. It says SELECT PRINTER. It can not find a printer. "NO PRINTERS FOUND". What kind of printer can I buy that would use this feature? I do not want to use a 3rd party app, but the actual Apple Print feature.

You need an AirPrint capable printer. The following link lists AirPrint capable printers.
http://support.apple.com/kb/ht4356

HP Smart Web Printing feature, problem with IE7 and FireFox3

"HP Smart Web Printing" problem with Internet Explorer 7 and FireFox 3I have a laptop that came with: Windows Vista Home Premium, Internet Explorer 7, FireFox 1.9. Everything worked fine.
Recently I bought a "HP Photosmart C4580 All-in-One" printer that came with a free software "HP Smart Web Printing".
Smart Web Printing worked fine with FireFox 1.9 browser. I liked it very much, because with it, I could print only the portions from the web page that I want, thus saving on inks. It really does more than that.
With IE 7, Smart Web Printing was a disaster. IE 7 stopped working. Every time I closed a web browser window, IE7 would stop working and start all over again. It happened all the time.
On suggestion from Microsoft Windows help desk I "Reset IE Setting". This solved the IE 7 problem , but it also removed the Smart Web Printing feature.
Next, one day I downloaded latest version of FireFox browser "FireFox 3". Once again I lost the Smart Web Printing Feature, because it was not compatible with FireFox 3.
Now here I am with no "Smart Web Printing" feature at all.
Any suggestion how can I get "Smart Web Printing" feature back. I love the feature
Thanks

March 27th 2009 I've just downloaded HP Smart Web Print onto an HP a6500f desktop system running Vista-64. I first installed it as a limited user and I get no icon in the IE7 taskbar. I examined the manage add-ons dialog and it was installed but the toolbar configuration has no control icon for SWP icon.
Then I logged off and logged on as a privileged user and downloaded again and tried to install. This 2nd installation actually REMOVED my first installation.
So I then downloaded for a third time and installed and it finished installing but there was no SWP icon in the tool bar. I examined the Manage Add-Ons dialog and saw one in there on the left side. I transfered the inactive icon to the active side of the dialog and then I immediately had TWO SWP icons in the task bar. (*mumble grumble*). So I removed one and all is OK now as long as I use the IE7 as a privileged user.
If I go back to being a limited user (not an unreasonable thing to do is it?) I don't have an SWP icon. Trying to install SWP application again only cause it to want to remove the existing installation.
I'm not very impressed with this behavior.
Is there anything that can be done to get SWP to work for limited users?

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

F4280 wireless printing windows 7 64-bit, not showing printer in "devices and printers"

Hi,
I am a little confused. Today I installed windows 7 64-bit on my acer 9423wsmi notebook. I installed my hp f4280 via a usb cable. It prints and scans. Now I try to install my wireless kit (came with the printer) which worked fine an vista 32-bit sp1. I looked up every driver etc. on hp.com and found the install guide for windows 7. Everything went as described and printing works even without the pc adapter. You might say what is the problem. Well I noticed the wireless (copy) isn't listed under "devices and printers". I found this a bit strange. I tried to install a printer via the windows wizard. But using the network option gives me the shared copy. And using a the usb02 virtual port to which the printer is connect yields the same result: a fully working printer but nowhere to be found in "devices and printers". I searched the internet for a solution but my search results get cluttered with support for the installation.
My questions:
Is this normal on this system with these settings?
Is there a way to let the printer appear in "devices and printers"?
Kind Regards
Carnelain

Hi Flash,
I still haven't fixed the problem. I assume you found this installation guide. If I follow this I still can't see the printer in "device and printers". But when I open a document (notepad, word) I can see the printer listed in the printer dialog. So I am able to print. Printer properties are a bit hard to reach but it works. I am still hoping some wizz kid from hp to come up with a solution . Keep me posted if you know something more.
Carnelain

Locked printing feature on Ricoh printers

Similar Messages

Maybe you are looking for