Looking for a new hard drive for my MacBookPro 5,2 (17" 2009 Unibody) : hybrid from seagate or a 7200rpm ?

I am looking for a faster and higher capacity hard drive for my 2009 unibody MacBookPro 17".
I wonder if I should go for a SSHD from Seagate model ST1000LM014 or for a standard HD but with 7200RPM.
I am worried about the reliability of the Hybride model from Seagate and if it is really that fast.

Hi, I have dv9730ca laptop myself and I have 2 160GB seagate 5400rpm 8MB hdd's, they have an external data transfer rate of 300MB/sec and an internal data transfer rate of 1.1GB/sec. They do get up to around 55oC (i use cpuid - hwmonitor to check this out) and I have heard using the 7200rpm hdd's can increase the heat output so I would recommend using the 5400rpm hdd's instead. The best way I have found to get over the heat issue from any laptop is to use a targus chillmat, it has 2 fans and runs off a usb port. I hope this info helps you out
HP Pavilion DV9730CA - AMD Turion 64 X2 TL-64 2200MHz, 2GB (2x1024MB) SODIMM RAM, 320GB (2x160GB) Seagate 5400rpm HDD's, nVidia GeForce 8400 GS Graphics, Broadcom ABG Draft N Wireless, HD DVD SuperMulti DL DVD+RW, 4 USB 2.0, S Video, VGA, HDMI, Firewire, 5 in 1 card reader, RJ-45, RJ-11, Expansion Port 3, Expresscard 34/52.

Similar Messages

I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

New Hard drive doesn't show up (MBP late 2009)

I have a 2009 Macbook Pro that was running Lion. The HDD failed so I installed a new one. This blank HD had no OS on it so I get the blinking question mark (the problem that started it all). I found my old snow leopard disk and tried booting from the disk. Each time I tried this I got hung up on the screen that just shows an apple and a little swirly time thing. I also tried booting holding option so that I could select exactly what I wanted to do. When I tried this, I noticed that there is no HDD showing up next to the picture of the disk. I know this is not normal because on my (working) iMac, it shows both my hard drives and the snow leopard disk. I recently went to the "Genius" bar where they performed a diagnostic. The test showed that the SATA cable, logic board, and HDD were all in place and properly functioning. I have already reformatetd the new hard drive through target disk mode on my iMac. I have no idea what else to try. I've let it run for several hours and all I get is an apple with the swirly time thing and a very hot laptop.

Hold down Option while you start up. Only the DVD will be shown, because the new drive is not yet bootable.
Choose the DVD and click the proceed arrow. It should proceed within one minute.
"A Mac that cannot boot from an appropriate System/Utilities DVD has a Hardware problem."
You should soon get the "What Language ?" screen and be able to proceed to Install.
If you cannot Install because of the Drive, answer only the What language question, and WAIT a quarter minute for the MenuBar to be drawn, then choose Disk Utility from the Utilities Menu.
Make sure the new drive is present, and has GUID Partition Map and a Mac OS X Volume in Mac OS X Extended, Journaled.

Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it. Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness). 7K pohotos on the Touch are no where else, must be saved! Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics! New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos. It might take a 3rd party app.
OT

My mac failed a month ago and apple needed to put in a new hard drive, which deleted everything. so, i need to put music from my iPhone to my iTunes library on my mac, please help?

my mac failed a month ago and apple needed to put in a new hard drive, which deleted everything. i need to put music from my iphone to my itunes library, please help?

Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

PC hard drive died and I have replaced it. Need to import the music on my iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto new hard drive? Senuti's just for macs.No old hard drive to copy.

My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)

See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock

I had the pages app on my macbook but had to put in new hard drive. Can I download pages again for free?

The Apple folks said I could download any apps I had purchased previously but were lost when my hard drive died. Now have the new hard drive, but don't know how to obtain Pages free from the App Store.

Welcome to Apple Support Communities
If you purchased Pages in the Mac App Store, open the App Store, log in with your Apple ID, go to Purchases and download that application. If you don't see it, check that it is hidden, and if so, unhide the application > http://support.apple.com/kb/HT4928
If you purchased Pages on a DVD, insert it and install iWork. Then, open  > Software Update, and install the latest version

Transferring Purchased Music from iPhone to new hard drive

Hard-drive burned up and has been replaced. Most music was backed up, but not all. And most of the new music (that hasn't been backed-up) is on the iPhone. But I can't copy the files on my iPhone back to my new hard drive. Obviously there are security measures to keep folks from transferring files all over the place. But it seems that if it's on my iPhone, I must have obtained it legally, and there must be some accommodation for a dead hard drive.
Same question for my iPhone apps. I'd rather not pay for apps twice, and iTunes won't let me copy them from my iPhone back onto my 'puter. As soon as I sync apps, they'll all disappear, unless there's some way to convince the phone that it's looking at the old, pre-burned-up-hard-drive.
File>Transfer Purchases sort of worked, but not completely. I have about 600 songs on my iPhone, and it copied about 200 of them to my new hard drive. I have music purchased from iTunes, music copied from purchased CDs, and free downloads (Starbucks, Paste, etc). And there's no trend in what got copied and what didn't. Some of each category was copied, but not all. Very confusing that I can't find a pattern.
OS X 10.5.8, iPhone 3G with 3.1.3

Apps issue solved. Or, more accurately, it's a non-issue. iTunes prompts you that you already bought the app and can download it for free. Not so with music, I'm afraid.

New hard drive...transfer songs?

Hi! I had to get a new hard drive on my computer, which wiped off all my songs from iTunes. Is there a way to transfer the songs from my iPod into my iTunes? Thanks!

You can't sync or drag your music back directly from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs but not playlists back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
iGadget Windows Only
If you haven't already done so, change the update setting for your iPod to manual. If you are using the iPod in manual update mode, your iPod is safe from being accidentally erased when you connect to an empty iTunes after reinstalling your operating system. However if your iPod is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual.
You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box: Managing Your Songs Manually
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

Can't install OSX after I installed new hard drive

Okay so my 2009 MacBook pro would not start up, took it to the genius bar and they said I need a new hard drive. I installed a Western Digital blue Scorpio one from Best Buy and now when I turn on the computer I just get a flashing folder with a question mark. I've tried holding down c or option when rebooting, and rebooting with and without the OSX install DVD. I'm never given any options and it either starts up to a blank screen or to the question mark. What am I doing wrong?

You need to prep the drive first:
Drive Preparation and Installation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU after formatting and return to the installer. Install Snow Leopard.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

How to restore data from my Time Capsule onto my new hard drive

My Macbook's hard drive had to be changed, and I'm trying to restore files from my Time Capsule onto my new hard drive, but all I see are three sparsebundle files (one for each Mac we have at home, including my computer/old hard drive). From that point I don't know what else to do. If I click on it, it opens a dialogue that says "opening volumes" and it stays on that for a while.
Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive? Does it have to do with these sparsebundle files? Or, is there another way?

Hello Alexevich. Welcome to the Apple Discussions!
Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive?
Check out the following Apple article: Restoring files from a Time Capsule backup

CQ57 Create recovery software from one laptop to fix a second w/ new hard drive

My son's CQ57 will start in Safe Mode only. I ran the setup diagnostics and the hard drive failed. I bought and installed an equivalent size hard drive. The disks that may have come with this laptop are at my exwife's house and she can't find them. I have a similar CQ57 that was my other son's. Can I create the necessary recovery software from mine to get the new hard drive going? It is Windows 7.

Usually Recovery Discs from one machine will not work on another ,unless they are the same model.
You can usually order Recovery Discs for less than $20. Contact HP Support in your country /region to order a set. Worldwide contact info can be accessed here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Transferring from time machine onto my mac after its had a new hard drive installed.

I have a new hard drive in my iMac, using Mavericks 10.9.5.
I would like to restore from Time Machine, all my info.
The Apple video "Time Machine Basics" talks about "migrating to a new mac" and this is straightforward, but I already have logged into my new mac! I don't have the option to migrate.
How do I go back into Time Capsule for the first time?
If I just open Time Machine and start backing up my "empty new hard drive" onto the Time Capsule which contains the saved info from before, will I then be able to then just go back to the previous saved dates? Does that make sense?

Thank you, that makes sense, however, I've only just realised that I'm logged onto the new Hard Drive as "Test".
When I plugged it in, and turned it on, it just opened up like that, without me needing to log in as 'me' yet?
Is this ok, and the best option to do as you suggest?

New Hard drive - IWeb site gone

Today I brought home my IMac with it's new hard drive because the old died. I've been restoring from my external and while daunting, it's going okay.
When I click on my IWeb icon in the dock it opens as if I don't have a website already built. My IWeb site is still active, but I don't know how to get it back to IWeb so I can work on it or make changes. The pages are listed on my .Mac account. Any help would be appreciated.

I'm wondering if you backed up your iWeb "Domain" file to your external drive? iWeb saves all the information about your sites in a single file called "Domain". This file would have been located on your old hard drive in the Users/username/Library/Application Support/iWeb/ folder pathway. This is the only thing that constitutes a backup of your iWeb work. Without the "Domain" file, then there is no way to get your existing online site back into iWeb for further editing or publishing.
Your only options would be to recreate your site or to somehow link any new site you create in iWeb to the existing site that is online.

Looking for a new hard drive for my MacBookPro 5,2 (17" 2009 Unibody) : hybrid from seagate or a 7200rpm ?

Similar Messages

Maybe you are looking for