Looking for AppMATes Cars 2 app and get "no results" for my search.

Bought the Disney/Pixar Cars toy for my grandson.  It comes with two cars and tells you to "download the cars app."  Which one?

https://itunes.apple.com/us/app/cars-2-appmates/id461788392?mt=8

Similar Messages

  • Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

    Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

    I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
    You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support?

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • How can I complaint about an app and get my money back?

    How can I complaint about an App and get my money back?

    First Contact the Developer of the App.
    If necessary...Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • How do I report a bad app and get my money back

    How do I report a bad app and get my money back

    http://www.apple.com/support/itunes/contact/

  • How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?

       How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?  As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.'  So, it plays next, but then the song after that is back in the old playlist.  I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue.  This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
       Thanks.

    At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
    If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

  • I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

    I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

    By search you are referring to Google search ?? or you are using any search module in your site and the keywords shows same topic multiple times on page ?
    Please elaborate more, provide site url.
    Regarding using keywords, description etc, you can add that to your page using page properties > metadata section.
    http://muse.adobe.com/strategies-for-seo.html
    Thanks,
    Sanjit

  • 10.5.5 Client Getting No Results with Spotlight Search

    Hi -
    My company is slow to change. We are just now getting some Leopard workstations in our enterprise. The thing my users noticed right away was that under 10.5.5, they are unable to get any results from Spotlight searches on our Tiger Xserves over AFP. The Tiger workstation users can get search results from share points but not Leopard ones.
    The Xserves all have 10.4.9 Server installed. The XServes and workstations are all bound to AD with SSO turned on. I limited the servers 10.4.9 Server because with 10.4.11 Server I get AD issues. 10.4.9 is stable for us.
    I am forced to use Leopard as the new MacPros demand it
    My question - What should I do so the Leopard workstations (10.5.5) can get real Spotlight results from my share points?
    I have looked at the other Apple Support Boards and I don't get understand what they are talking about.
    Thanks in advance.

    I am an IT manager in a similar situation. However, I have shelled out the thousands to upgrade everything to the latest OS with my xserve running 10.5.5, and users running 10.5.5 or 10.5.6. Spotlight is totally useless. I have talked to tech "supportless" several times - no help. I have installed and reinstalled 10.5 on the server, reformatted drives, copied and deleted hundreds of gigs of data, done all kinds of terminal commands that were supposed to fix it, but it still just doesn't work. I wish Apple would stop coming out with new stuff for a while and fix this basic computer function. For now I use "Better Search". Better Search is Freeware from http://www.fornextsoft.com. Its ok - at least it finds stuff, but it is still not 100% accurate sometimes.

  • HT204088 How can i cancel a subscription for an app and get a refund

    Hello
    I have a subscription for Rhapsody and I want to cancel it, I just got charge $9.99 for the new month, yesterday I want to cancel and get a full refund. I cant afford to have the subscription any longer.. I would appreciate any help you can provide
    Thanks
    Maritza Gaitan

    There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
    In terms of a refund, all purchases are considered final but you can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Can you return an app and get your money back

    I was told you can return an app that you purchased and get your money back if that is true how do I do it?

    A refund may not be possible since the terms of sale for the iTunes Store, as Joey said, state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
    http://www.apple.com/support/itunes/contact.html
    It's possible they'll make an exception for you. An exception is more likely if the app is defective in some way or doesn't do what the developer advertised and the developer has been unable or unwilling to help you.
    Good luck.

  • HT1937 I purchase some Apps and get billed to my e-mail address. How I pay the bill with my "Pay Pal" account?

    I purchase some Apps at the Apple Store and get billed to my e-mail address. How I pay my bill with my "Pay Pal" account? Is a bit silly request but I'm a newbie.

    Hello John
    Sorry I haven't got back to you sooner.
    Thanks very much for your help, your solution solved my problem.
    Thanks again and kind regards
    Mike

  • Before I updated to ios7, I had the nationwide mobile banking app. This app would not function properly once the update had downloaded, so , following previous advice, I deleted the app. Now when I try to download the app, I get 'no results for this app'.

    Before I updated my iPad to ios7, I had the Nationwide Mobile Banking app. Once the update was completed, the app would not open properly. On advice I deleted the app, and now, when I try to reinstall it from iTunes app store, I get this  'no results found for natiowide mobile banking'. Why is this happening??

    Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
    If you keep encountering problems contact iTunes support. They will help you sort it out.

  • First time downloading an app and getting "waiting" message

    I am very new to using Mac, but tried to download an app from the app store for the first time yesterday - Keynote - onto my MacBook Pro. I don't know the system details - it is about 11 months old if that helps?
    The first time i tried, it said 'installing' for a long time, until I accidentally deleted it from the dock at the bottom of the desktop when trying to look for details. I went back to the app store and tried to install it again, and it has now said "waiting" for the past 24 hours, and the bar under the icon hasn't moved.
    I am connected to decent speed internet at a University, so don't think that is likely to be the problem.
    Would appreciate any help - and if possible, for that help to be in very simple language (not Mac-speak), as I am still a very basic Mac user! Thanks!

    Hi..
    I don't know the system details - it is about 11 months old if that helps?
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac the click More Info then select Overview from the menu. Since your Mac is so new it's probably running v10.7 Lion.
    I am connected to decent speed internet at a University
    Not just download sppeeds that can be a problem. See if this is a proxy issue...
    Click the Apple menu icon again, then from the drop down menu click System Preferences then click Network > Advanced > Proxies.
    If any of the boxes on the left are selected, then it may be the school's network admin has required that you use a proxy (filter) for blocking certain ares on on the internet such as the Mac App or iTunes Stores.
    If none of the boxes on the left were selected, try re downloading the app. You will not be charged again.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    Also, if you have anti virus software installed, you need to disable that in order to download apps from the App Store.
    edited by: cs

  • Jarred swing app and getting console output

    Hi,
    I've created a jar app using eclipse that starts a swing application. The jar works fine, but I was curious if there was a way to double-click the file and get console output as well. When I start the program through the command line, I can get my output, but double-clicking the icon doesnt' start up a console. Is there a way to accomplish this?
    Thanks

    Normally in Windows systems the javaw executable is assigned to the jar extension. javaw is a jvm without console. You might want to change that and assign java to jar but be aware, that this affects all jar files.
    If you want to do that just for that jat file I would write a bat file which starts the application using java.

  • TS1424 I am unable to update my apps and get this message: There was an error in the App Store. Please try again later. (20)

    Help, i'm unable to update anything in the app store and get this message: There was an error in the App Store. Please try again later. (20)? I updated my account info and still no luck...
    And yes, I have tried later.

    And now I get this message:
    There was an error in the App Store. Please try again later. (13)

Maybe you are looking for

  • Issue in ALV Grid Grand Totals

    Hi Friends,    Hwo can i display  grand total text in ALV Grid? Eventhough i am using Totals_text parameter in layout i am unable to display.  any one vcan help me out in this refgard. if pos send the code Regards, Vijay

  • Pricing procedure for service PO

    Hi, Why there is a seperate pricing procedure in service tab of the service POs? Where we need to assign it? Regards,

  • Enhacement component EXIT name for 0EQUIPMENT_ATTR

    Hello, I am enhacing 0EQUIPMENT_ATTR, and in CMOD i created a project. What is the Enhancement Component EXIT name for 0Equipment_attr to assign to my project? Please help me in this! Thanks in advance.

  • Nik Plugins - msvcp110 dll fixed, but now CS6 crashes

    I know a lot of us had that problem with Nik autoupdating that removed msvcp110.dll. I did as recommended and reinstalled and while the filters reappeared, now they crash once I try to confirm a style and exit. For a while they worked in CS6 32bit bu

  • Back up projects...which media?

    I have post question about back up on DLT or DVD or external HD. I got some answers but I am curious if it is good idea to save project files (FCP, DVD SP) on RAID or external HD or DLT. Appreicate your replies. Thanks