Losing Connection to the Network

Hello all, 
For several years I have had problems with getting disconnected while playing video games whenever someone calls.  Now I am having the problem but nobody is calling it just kicks me offline for no reason.  I thought the problem before was that my phone and wireless were the same Ghz (2.4) but now that the phone isn't causing interference I don't know what is. My Router is a broadband 2.4 GHz Wireless-G router - Model # WRT54GS.  I also have a AARIS Touchstone Telephony Modem that Comcast gave us.  The problem that I thought I solved was by adding in a linksys Wireless-G Range Expander so that the connection could go from my room upstairs down to my basement, this is not the case anymore.  I seem to be able to play for 20 minutes or so but then it says I do not have connection to the network, the only things I can think of are:
1. We need a new router, this one is old and outdated.
2. With no password on our connection someone is using it and causing too much activity. If that's the case should I get rid of the expander and or add a password?
Thanks for any of your help or suggestions.   

Also change the channel on the router's wireless to 11. This is the least used frequency.
Also keep your phone away from the router. Can't tell you how many calls I got because of cordless phone interference when I worked tech support

Similar Messages

  • Machines losing connection to the Network

    We are experiencing some irregular network issues whereby we have 2 G4 Mirror Door Desktops acting at servers (10.3.9) and a variety of Powerbook G4s and Macbook Pro's (10.4.x) which are continually dropping off the network sporadically. Apart from these two desktop servers, all the machines affected are laptops strangely enough.
    Firewall is not enabled on the Macs.
    The Macs lose all network connectivity including printing, internet connection and server connection.
    I have tested pinging to and from the Macs and the results are always as though they are off the network. The Macs can however ping itself indicating it can see a network. Whe you remove the machine from the network and re-add it, the IP address range is 169.x.x.x. This is because by default, Apple allocates the user with an IP range so far off the network that its indicating it can see a connection (ie ethernet card and cable) but cannot see the network.
    To get the machine back on the network, you need to remove and re-add the network cable to get connection again. We looked into every possibility inclusing Firewall or DNS issues.
    We have compared the switches and vLANs and they are all the same; we have checked that Appletalk is broadcasting correctly through the switch; we have added the machines with a static IP address (servers have static IP addresses anyway)and the machines still drop off; we have altered DHCP lease renewal to a longer period and it still dropped off; removed Appletalk from a machine and it still dropped off.

    It may be a 'typo' by you, but forget about 'appletalk' - this is not relevant to your problem (and pretty well redundant now). This looks like a TCP/IP issue.
    What is doing your DHCP? Presumably you have checked to ensure that there is only the one dhcp server in your network, and another has not accidentally been enabled (on a server, router or airport). What is the dhcp range for the DHCP server?
    Your post suggested that the servers, with static IPs, also 'drop off' the network. So a server IP cannot be pinged from a lan machine which has a correct IP assigned to it (rather than one which has a 169 address which obviously will not be able to ping it) ?
    On your laptops, when connected via an ethernet cable, have a look at Network Prefs-> Show: Network Port Configurations. In what order are these? Specifically, I am wondering if Airport is getting prioritised above Built-in Ethernet and maybe there is a 'rogue' airport network which the laptops discover and attempt to join ahead of built-in ethernet.
    -david

  • I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

    I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
    The 5th Gen keeps on losing connection with the main router and thus with the internet.
    Any ideas why?

    Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

  • Losing connection to iTunes / Network

    I continue to have the same problem over and over and am hoping someone can assist. The ATV continues to lose it's wireless connection to the network/iTunes. Only way back is to reset the router and ATV; it will then stream anything just fine. It will sometimes work for a couple of days and then just lose the connection. When it is working, I can put the ATV in standby, shut down the computer and start it back up and it will still work no problem.
    Has anyone had this happen to them where it keeps losing the connection? It's not an interference issue so I'm not sure what else to try.
    Any help would be much appreciated. Thanks all.
      Windows XP Pro  

    There are a few other threads about this:
    http://discussions.apple.com/thread.jspa?threadID=906315
    http://discussions.apple.com/thread.jspa?threadID=906949
    It is bloody annoying.

  • Losing Connection to BB Network (BES)

    My wifes 9550 keeps losing connection to the BES network. Happens about once or twice a month. She is not a power user and doesnt install / add anything. It has happened since she got it back in NOV. I updated her to 607 when that was releaed....thinking it might help (Havent pushed her to 713 yet). But it still happens!! Again today it did. She wont get emails etc till it connects.
    Shes not doing anything strange.. the little 4 dots next to 3G just disappear. I have the same phone, we are both on VZ... and I have had no issues like this.
    Any Idea?
    for all your theming needs go to http://bbthemelab.com

    Hi StaticFX,
    Is it possible you can PM me your wife's PIN?  I can take a look to see if there is anything unusual going on from our side.
    Also, have you contacted Verizon about the issue?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My deskjet 3050 j610a isn't connecting to the network in my house.

    my deskjet 3050 j610a isn't connecting to the network in my house.  I've tried about everything and it still not connecting.  It's a wireless printer and it's not connecting to either my desktop or my laptop.  what do I do now?

    Select  ▹ System Preferences ▹ Network. The WiFi connection should be at the top of the list on the left, and selected. Click the button labeled Assist me and select Assistant. Follow the prompts. How far do you get?

  • Upgrading to xcode and can't connect to the network

    Hi! I use a C++ library in my application which connects to the network (I suppose it uses sockets). I've been using it for months and I was using xcode 3.2.4. Now, I just had the great idea of upgrading to xcode 3.2.5, and I found out my application was crashing with the error:
    If you are encountering this problem running a simulator binary within gdb, make sure you 'set start-with-shell off' first. 3.2.5
    Ok, couldn't solve it, so went back to 3.2.4, as suggested somewhere. The application is not crashing anymore, but now the library can't connect anymore to the network. Tried to rebuild it (I didn't write the library but I have the sources) and use the new library, but nothing. Still the library can't connect to the network. I tried with every simulator.
    Any idea what there could be wrong and how I may be able to solve this? Can I somehow delete manually everything related to xcode and the simulator and try to start all over again?
    Thanks!

    I've been able to temporarily solve this problem by removing the entire Development directory and installing again xcode 3.2.4. Even with xcode 3.2.4 however, the same happened, and I had to do this procedure again. Now it seems to be working correctly, but it seems something very strange has happened. Hasn't anyone experienced anything similar?
    Thanks!

  • Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

    At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
    As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
    If I move back downstairs it reconnects
    This has only started happening in the past week or so
    I've tried to forget and rejoin the network, but this doesn't work
    I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
    Does anyone have any ideas what is causing this?

    Sounds like your wi-fi signal strength has degraded.  Try rebooting your wi-fi router, or get it serviced.
    Do you have similar issues with any other wi-fi routers?

  • SOLVED! HP Officejet 6500A E710 will not stay connected to the network. scanner not connected

    After 5 hours of live remote HP tech support, and 10 more hours of web searching, I am happy to say I have solved the wireless network connection issue with scanning and printing using the HP Officejet 6500A E710n-z.  I notice that there are a lot of people with similar issues with no common, successful fix.  Here is what worked for me.  
    Background Info:
    Upgraded internet service from 9Mbps to 27Mbps...Provider brought out new Arris DG860 modem/router.  Configured network and connected all clients (smart phones, PCs, Tablets, etc) successfully accept the printer.  With this new router/modem the printer/scanner/fax would not connect to my PC at all (Windows 7 64-bit).  The Officejet was always connected to the network, however, anytime I tried to print I would get an error "Unable to connect to the printer...", and when I made an attempt to scan.."Scanner not connected, make sure it is connected to the network..." blah blah blah.  
    Process:  
    After searching the web for solutions with no success, I finally made my first call to HP tech support.  Tech tried numerous fixes: many network changes (channel, static IP, etc.), made changes to Windows system settings and registry, installed new software and drivers, ran the scan doctor, partial, semi, and full reset on the printer.  He changed my wifi channel to 6 (or 11) from AUTO and whola.  That seemed to fix the problem.  After hanging up the phone 10 minutes later "No connection" errors again.  Made a second call to HP Tech Support, and this new tech basically tried all the same fixes as the first tech.  Worked again for 10-15 minutes then disconnected.  Made third call to tech and this individual tried the same fixes as the previous two, but to no avail.  He said he would have to direct me to a more Advanced Technician and would call back tomorrow.  They called back the next day, and this new tech fixed the issue within 20 minutes. 
    Problem/Solution:
    The fourth "more advanced" tech made one change in my network configuration settings.  He changed my network mode from B/G/N to B/G and now the printer/scanner/fax stays connected and works like brand new.  The only problem is that all my devices (including the Officejet) are 802.11N capable.  Setting my network to the old B/G mixed mode slows my speed down just a bit.  Using B/G/N mode or N, my download speed is 27 Mbps.  On B/G mixed my speed is 25Mbps.  Not too big of a deal, though.  All the HP Support Techs were very nice and helpfull.  They refunded my $25 Tech fee [fee charged when product is out of warranty] because the problem is not "technically" solved, even though it does work.  Conclusio:  This seems to be an issue with my the modem/router provided by my ISP.  Could also be that it is an older Officejet and need to upgrade.    To Fix Follow the Steps Below:
    Step 1:  Find your default gateway IP...usuall 192.168.0.1 or 192.168.1.1 or similar.  Type this IP into your web address bar and hit enter.
    Step 2:  Enter the username and password.  This is normally set at factory default --> username: admin ....passowrd: password .... or .... admin
    Step 3: Go to the "Wireless Setup" tab and under the "Advanced Options" and "Wireless Network Settings" change the "Wireless Mode" to "B/G mixed".  
    Step 4:  Click "Apply" then close the browser.
    You may, or may not, lose your wifi connection for a short period while the new settings are applied and you may, or may not, have to power cycle your modem/router.  That's it.  Worked for me and I hope it works for you too.  If you have any questions or comments please feel free to post. 

    OK, that all sounds right.  Here are a few more router config ideas:
    1. Make sure that 802.11g mode is available, along with others is OK, but 'g' must be present.
    2. Change the channel to 11.
    3. Use WPA or WPA/WPA2 encryption, not WPA2 only.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • On iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

    Help
    I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

    Hello.
    Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
    Information about error -50 and downloading videos
    http://support.apple.com/kb/TS1583
    If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

  • I have a Time Capsule as my router.  I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

    I have the Time Capsule hooked to a wireless modem.  It uses a static IP, which is put in and running.  The MBPr connects, as well as my iPhone 5, to the internet and network without problem.  I can see the Mac Mini, external drive attached to it, and the Time Capsule.  The Mac Mini connects to the network wired or wirelessly, but not to the internet.  On wireless, using AirPort the Internet shows green, but no connection when I open Safari.  The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr.  I was hoping someone might have an idea of what was going on.  Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

    No, its is connected direct to the providers fiber box.

  • My Apple TV is reading " There was a problem connecting to the network" error - 3906

    I have reset all network components and the Apple TV.  I first set up Apple TV and it worked beautifully.  The next time I turned it on it gave me the error message.  I have tried reconnecting to the netwrk multiple times.  I have my laptop and my ipad connected to the network, but the Apple TV will no longer connect.  I am out of solutions.  Any suggestions would be greatly appreciated.  Thank you.

    I had the same problem. I just solutioned it just by disabling MAC Address filtering in my LinkSys router. This is strange as I did enter the address of my ATV3 in the list of allowed devices in the router configuration software.
    The truth is that it now works! I just seems that ATV is not compatible with MAC Address filtering.

  • TS3798 Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?

    Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?

    Have you tried rebooting your wireless router by removing power from it for about 30 seconds, then powering it back up?

  • When I enter my password to start my atv it tells me, that "there was a problem connecting to the network."  My Ipad works fine but not my new atv.  I have reset my password multiple times with no help.  I have also rebooted my wireless server.take it bac

    When I enter my password to start my atv it tells me, that "there was a problem connecting to the network."  My Ipad works fine in my house, but not my new atv.  I have reset my password multiple times with no help.  I have also rebooted my wireless server.  Do I take it back?

    Where is everyone????  Does anyone have an answer???
    Allik1

  • HP photosmart C4700 cannot be connected over the network.

    my printer was recently unplugged and refuses to print. i have reinstalled all drivers and software but still cannot connect over the network. please help soon as i desperatley need to print off college work. this has happened before but reinstalling the drivers worked.

    Hi..
     try this one....
    Uninstall any remaining Hp printer program from your system..
    1. Click windows logo or start button- on the search box or run - type in %temp%, press enter
    2. look for the 7z folder on the TEmp folders.
    3. Open &z folder and look for util- open util look for ccc folder- open ccc folder loofk for uninstall3.
    4. Procedd to Uninstall level 3- restart the computer -go back to %temP% trhen delete tye 1st 7z folder-- to the same process for the remaining 7z folders- open util-ccc-uninstallL3- restart Pc and delete te 7z folder
    5. Once your'e done- go to add or remove programs or programs and features to uninstall remaining Hp printer software.. then restart you pc again..
    Follow these steps before re-installing the printer:
    Click Start , and then click Run . The Run dialog box opens.
    In the Run dialog box, type msconfig , and then press Enter .
    If the User Account Control window opens with the message 'Windows needs your permission to continue ,' click Continue to close the window.
    In the System Configuration window, click the Startup tab, and then click Disable All .
    Click the Services tab, click the Hide all Microsoft services checkbox, and then click Disable All .
    Click Apply , and then click OK .
    When prompted to restart the computer, click Restart later .
     Restart the network devicesFollow these steps to restart all the devices on the network.
    These steps include turning off the computer. Consider bookmarking this page for ease of reference.
    Press the Power button to turn off the product.
    Click Star,  click Shut Down , and then click Shut Down from the drop-down list.
    Turn on the wireless access point (router).
    Press the Power button  to turn on the product.
    Press the power button on the computer to turn it on.
    When the computer turns on, a System Configuration Utility message opens on the computer. Select the Do not show this message again check box, and then click OK .
    proceed to the installation.......then prove functionality...if successful continue these steps
    Re-enable startup programs and services
    Click Start ( ), and then click Run . The Run dialog box opens.
    In the Run dialog box, type msconfig , and then press Enter .
    If the User Account Control window opens with the message 'Windows needs your permission to continue ,' click Continue to close the window.
    In the System Configuration window, click the Startup tab, and then select the check box next to each program that should run when you turn on the computer. If a program should not run when the computer is turned on, leave the check box clear.
    CAUTION:Do not disable any Microsoft services.
    If no changes should be made to startup programs or services, click the General tab, and then select the Normal Startup checkbox.
    Click Apply , and then click OK .
    When prompted to restart the computer, click Restart .
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

Maybe you are looking for