Loss of connectivity to Airport Express

The network is one PC running Windows XP with two Airport expresses. When we connect to the airports, there's no problem and the signal is "Extremely Strong". After a minute or two, the computer loses all contact with the network and the Airtunes shuts off. When we reset, the network is "Extremely strong" and the same happens.
It sort of feels like a network interference problem. Is there a way to strengthen the signal with or without more hardware? Maybe an airport configuration? Also, It loses the connection even when the airport is a foot or two away from the airport.

Ensure that the Enable IEEE 802.1x authentication for this network check box is not checked.
iFelix

Similar Messages

  • Internet speed slows down when connected via airport express

    Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

    Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
    As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
    The Express will make the signal go further when it extends....but it will not make the signal go faster.
    A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
    If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
    If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
    Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
    There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

  • My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

    My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

    .....doesn't that seems to suggest the modem?
    That is what I have suggested....twice now. From posts above:
    My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
    and
    I believe that the problem lies with the modem, and not the ISP signal.
    Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

  • Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

    Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

  • How can I print from my IPAD3 to a printer connected to Airport Express?

    How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

    You cannot.
    The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
    "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
    http://www.apple.com/airportexpress/#wireless-printing
    "AirPrint-enabled printers  connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
    http://support.apple.com/kb/ht4356
    The HP ePrint app also does not provide such functionality:
    Can I print from the HP ePrint mobile app using USB or Bluetooth?
    No. You can only print directly to supported HP printers on a local wireless network.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
    Shlomi

  • After upgrading to OS 10.8.1 I can no longer scan from my Canon MP240 printer when it is connected to Airport Express.

    I can no longer scan from printer (Canon Pixma MP240) when it is connected to Airport Express, although printing is no affected. However, when connected directly to MBP scanning works fine. I have tried all the standard remedies; reinstalling drivers, resetting printer system, selecting sharing options, but no luck. Previous to Mountain Lion this function worked fine. Any ideas how to regain this capability?
    Thanks,
    J.

    I'm almost completely certain that the scanning feature worked before the update. Having said that though, I don't scan a great deal and it may be the case that when I have done, the printer was directly connected to the MBP. However, since I have a laptop it's far more logical that I would have had the printer connected to Airport Express for reasons of portability so I can't really see that I would have had the printer connected directly to the laptop. Besides this, I have no memory of having this problem previously. Therefore, I don't think my memory is to blame although of course, if it were I'd have no way of knowing!
    J.

  • Itunes will not stay connected to Airport Express with any Yosemite update.

    Since installing Yosemite (original and updates) my itunes will no longer stay connected to Airport Express on my iMac. Any ideas?
    I have no probblem at all when using ipad or other devices.
    Matt

    Hello mtvessell,
    If you are having issues connecting to the iTunes Store, then start with the article below for some general troubleshooting to get it sorted out. If it continues, then take a look at the second article for additional support. 
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/en-us/TS3297
    Regards,
    -Norm G.  

  • Itunes starts/stops when connecting to Airport Express

    When I try and play songs via my wireless laptop, the music will stop/start as if it is trying to connect to my airport express. But, if I play the music from my desktop that is connected directly to my wireless router, it will play just fine (no pauses).
    I have a Linksys 4-port Wireless G Router (model WRT54G).
    Need some advice on how to get my laptop to play music without starting or stopping

    It appears iTunes is indeed looking for speakers connected via airport express, but, as your router isn't an airport product, it doesn't succeed.
    Try turning off the airtunes function in the iTunes preferences.

  • HP Laserjet 1020 connected to Airport Express - Can't Print from Windows XP

    Hi,
    I have been using Airport Express for almost a year now, and it works fine with my old LaserJet 1200 connected to it, meaning that BOTH my ThinkPad(WinXP) and PowerBook(OSX 10.3) prints off the printer nicely. Last week I bought a LaserJet 1020 to replace the old printer. Now I can only print off my Mac, and not the ThinkPad.
    Here are some additional information:
    - Airport Express has been updated with latest updates.
    - Using newest printer driver available from the HP website.
    - New printer works when connected to ThinkPad via USB.
    - New printer works when connected to Airport Express and printing performed using my PowerBook.
    Therefore, My conclusion is that Airport Express and Printer is working just fine, and that it's just my ThinkPad not being configured correctly. (Although at the back of my head I am guessing that just MAYBE it's the Airport Express not accepting a different printer)
    This is what I did to install the printer from my ThinkPad to work with Airport Express (which is not working):
    1. Add a printer
    2. Local printer attached to computer (no auto detect)
    3. Selected existing TCP/IP port 10.0.1.1
    4. Selected my new printer driver
    5. Finish
    I also tried a few things like:
    - Deleting the TCP/IP port and creating it again before installing the new printer again.
    - Off both airport express and printer and on again after about 10sec.Airport was on first, and after the LED turn green, printer was turned on and USB plugged into airport.
    - Restarting my ThinkPad.
    I have tried everything that I can think of, and nothing worked... hence this posting to get professional help.

    Hi,
    You might want to download and install bonjour for windows to your Thinkpad it is how I got my roomates XP laptop to print on AX.

  • How to get windows 7 pc to access a printer connected to airport express

    Hi,
    I have connected an airport express to my BT home hub and created a new Wi-Fi network. I have also connected a Canon MP550 series printer to the express which I can access to print from my macboon pro. However I am unable to print from my Windows 7 SP1 laptop even if I connect using the same Wi-Fi network. Have used Bonjour and it installs the printer but still cannot print from my Win7 laptop. Any suggestions why is it happening?
    Thank you.

    Hi,
    I have connected an airport express to my BT home hub and created a new Wi-Fi network. I have also connected a Canon MP550 series printer to the express which I can access to print from my macboon pro. However I am unable to print from my Windows 7 SP1 laptop even if I connect using the same Wi-Fi network. Have used Bonjour and it installs the printer but still cannot print from my Win7 laptop. Any suggestions why is it happening?
    Thank you.

  • Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

    i have a time warner modem with the ethernet cable plugged into my airport express to create a wireless network in my house. my macbook and dell connect with no prob.
    the xb recognizes the airport express, shows it as connected with green bars, but when i try to log into xbox online, it says that there is no connection.
    i can plug in the ethernet cable from the xb to the airport ex and there is no problem. only when trying to use the wireless adapter.
    how can i stop this? also, how can i find my IP address?
    since the xb wouldnt connect and find my ip automatically, i tried to do it manually. when i go to terminal on my macbook and enter "ipconfig e0", i dont see an IP address.
    i have seen a lot of info on this but it mainly deals with airport extreme or those who are trying to connect to airport express with an ethernet cable.
    so if you can help me troubleshoot the wireless connection between my xb and my airport ex OR explain how i can find my IP address, i would be very grateful.
    FYI---the airport express was purchased in april, so i believe it is the new "n" model.
    thanks for all your help.

    Gary Sanborn, please share your tricks. I'm curious to know how you got it to work. I used to have the old Express and that worked just fine. The new version (n) doesn't seem to connect to xbox live. As previously stated, mine also shows "connected" and a strong green bar signal on the xbox but the text can't get passed "connected to live"... if I'm not mistaken.
    I heard about holding down the option button white selected the type of wireless connection and connecting to wireless b only. I would want to avoid this option. I don't want my express to run that slow. Please advice. Thanks in advance.
    By the way, I haven't tried it since recently upgrading to OS X 10.5.3. I wasn't sure if that affected airport's connectivity with xbox 360.
    Message was edited by: Gino Zevallos

  • Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

    Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

    I have an iP4500, which I assume is quite similar to your model.
    I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
    Plug the printer into the USB port on the Express and restart the printer.
    Open System Preferences (gear icon on the dock) and then open Print and Fax
    Right-Click in the printer area on the left and select Reset Printing System
    Then click the + (plus) button at the bottom of the printer list to install the printer again.

  • Can I connect the Airport Express to a TV and watch the screen of my Mac on the TV?

    Could I know if I can connect the Airport Express to the TV and watch the screen of my Mac or iPad or iPhone... On the TV?

    Welcome to the Apple Support Communities
    That's not possible with an AirPort Express. However, what you can do is to use an Apple TV if you want to mirror your iPhone, iPad and Mac onto the TV, being all of them connected to the AirPort Express. Read > http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

  • Can't get itunes to connect to airport express via air tunes

    Hi,
    I just bought and installed an airport express (for windows 7) everything is now connected but i can't get itunes to recognize my airport express via air tunes. I can see the multiple speakers in itunes, but when i click on it to connect to airport it just comes up with connecting, loads for about a minute then minimizes without connecting.
    Has anyone else experienced this? How can i get this to work?
    Message was edited by: Toddy85

          You've probaby solved this by now, but if not... When upgrading itunes on a Vista or Windows 7 machine with Windows Firewall running for some reason Bonjour can't get through the firewall and thus Airplay does not work. Not good when all your Hi-fi's are connected via airport express!
    I found to resolve the issue you have to install an older version of Bonjour. It won't work if you try to do this straight from Apple.  So try this...
    1. Firstly install and older version of itunes from the web (say version 10.1) Try www.oldapps.com
    2. Then find the Bonjour file in program files
    3. Cut and paste it to your desktop with its contents
    4. Uninstall itunes and Bonjour via your control panel (the desktop file of Bonjour you moved will still be there).
    5. Install your new version of itunes, say version 10.5, from the apple website.
    6. Before opening it go to program files and cut the (newly installed) Bonjour file and paste it somewhere different to the desktop (you can't just delete it). It does not matter where you won't be needing it.
    7. Now Cut and paste the old version of Bonjour you stuck on the desktop in Program files in place of the one you just moved.
    8. Hey presto, Airplay, Windows firewall and your Airport Express' should all get on again.
    Hope this works...
    Jim

  • Airport 6.3.1 - Unexpected error connecting to Airport Express

    I have an Airport Extreme (A1408) base station. I am trying to add an Airport Express (A1392) to my network using Airport Utility 6.3.1 (631.4) with Mac OS/X 10.8.4 (12E 55) running on an iMac. The Airport Utility can find the Express, but returns "An unexpected error occurred. Try again." I have reset the Express using the pinhole without success. I also tried connecting another Airport Extreme (A1408) to the same network with the same result: it can find the device, but returns an unexpected error.
    Based on others' posts, I have tried changing the Network setting for IPv6 to "Link-local only". This also did not resolve the problem. Any suggestions are welcome.

    I really appreciate your quick response!
    The factory default reset didn't work. What did was connecting an ethernet cable. Here's what I did (for anyone else having a similar issue):
    Connected the Airport Express via ethernet cable to the Airport Extreme base station.
    Airport Utility found the Airport Express and set it up on the ethernet (wired) network. Airport Utility then showed a solid line between the Extreme and the Express to show they were connected.
    I then edited the properties of the Airport Express as follows:
    On the "Wireless" tab, change "Network Mode" from "Create a wireless network" to "Extend a wireless network".
    After the Airport Express rebooted, I detached the ethernet cable.
    I then unplugged the Airport Express and plugged it back in the room where I actually wanted it to serve as a wireless extender.
    I waited a good 2-3 minutes, checked the status of the connection in Airport Utility in Wi-Fi mode, and voila! It worked. The solid line now shows as a dotted line between the Extreme and Express to show they are connected wirelessly.
    I tried connecting a peripheral (in this case, my ethernet-enabled TV) via ethernet cable to the Airport Express extender and it was fully functional.
    Thanks again for your help.

Maybe you are looking for