Lost with 8.1.7

This should be simple, but the only resource I have to hand is the 10g PL/SQL manual...!
I have a stored procedure (body below) that runs, but that's about all! No error logged, and no data inserted. I have granted INSERT, SELECT, UPDATE to the user for the table. Here's the code (nothing clever)...:
value1 IN VARCHAR,
value2 IN NUMBER
AS
BEGIN
INSERT INTO schema1.table1
field1,
field2,
field3
VALUES
value1,
value2,
0
END sp_procedure;
The commit statement is handled by the calling module.
So, if it was permissions, would I not get a warning, and if the commit has failed, ditto? So any idea where the data has gone?
Thanks!

Thanks for the suggestions. I switched off this problem and moved on to the next stage - which I made harder then necessary!
I have been warned about a TRIGGER within the database, but could not find any to DISABLE. Hence my partial switch-off. But having now fixed the next stage, my mind wondered back to the initial problem.
I can run the query from SQLPLUSW.EXE without any problems. The documentation would therefore point to a permissions problem. The main developer for this system is in Ireland today, so if there is a TRIGGER consuming any exception, I have to wait for tomorrow.
Thanks once again. Anything else comes to mind, please profer it.

Similar Messages

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Thank you. The old one will stay reported?

I am totally lost with this instalation with Adobe Photoshop, can anyone HELP ME ????

I am Totally Lost with the installing of my Adobe Photoshop CS6 ---- I have downloaded the 3 files ( directions & 2 installation setup programs) NOW WHAT?????

Cailinb1420473 do you receive any specific error messages when trying to install Creative Suite 6? For information on how to install Creative Suite 6 please see Install Adobe Creative Suite 6. If you have any questions regarding the document you are welcome to update this discussion.

How to get back software I lost with Belle update?

I had the following games installed on my N8 when there was this "Summer Game Gifts" campaign:
- Tom Clancy's H.A.W.X. HD+
- Angry Birds Seasons
- The Settlers
- Angry Birds Rio
- Monopoly Classic HD
- Worms HD
- GT Racing HD+
- Tetris HD
- Guitar Rock Tour 2 HD
They are all, besides of almost every other program/app I had installed, lost with the Belle update. Only Tetris is still on my mobile, maybe I had installed it accidentally on C: and not like all the other games on E:
All the games don't appear in my Nokia Store history ... but one game "Brain+" appears in my history but costs now 90c, I downloaded it for free like two months ago.
Why isn't the update making a backup of ALL applications if also applications on E: are deleted during the update process?
And my prime question: How can I get back all this games?
Solved!
Go to Solution.

There is a FAQ by Nokia regarding the Belle update and more specifically what apps are not yet compatible.
http://europe.nokia.com/find-products/nokia-belle-update/nokia-belle-update-faq?intc=ncompromolp-fw-...
So far, the Belle update seems to be the most problematic update yet and given the time it's taken them to release the update since they announced it back in August 2011, you'd have thought it would have been a lot better than this.
All the best.
Ray.

Lost with "Trees" how to???

Hi guys!
My goal is to rebuild something like psv2 (business event menue) in web dynpro.
But I'm really getting lost with "trees" there. Actually i have no idea how to start and handle trees.
I can't have a look at the WDR_TEST_EVENTS because this services are somehow disabled in our environment,
Does someone have some good Tutorials (step by step) how to work with trees?
regards thomas

I couldn't find any step-by-step tutorials on the subject. Although you may have already found it, the online help link has a decent amount of details:
http://help.sap.com/saphelp_nw70/helpdata/EN/21/ad884118aa1709e10000000a155106/frameset.htm
Also even if you can't run the sample application (probably just because the service node is deactivated - you can go to SICF and activate it), you can still study the source code.
Do you think that you will be needing a very dynamic tree structure (in which case you would model a recursive node context) or do you know the tree structure at design time (in which case you simply model that structure in the context)?

The partition on my T400s lost with unknown reason

The partitions on my T400s lost with unknown reason. The virus was suspected for the demo version of Norton antivirus tool were due. I have to recovery my system to factory setting. But to my surprise, the laptop can not be booted any more. I don't know why. Is there anyone tell me how to deal with it. Thank you very much.

Have you tried restarting both the Mac and the External Hard Drive?
I doubt it, but it's not a bad idea.

I'm lost with my new "used" iPod touch 4th gen. Just downloaded iOS 6; seems to be trying to access a WIFI signal but I have it hard wired into my MAC and I do not have WIFI. Need iPod for dummies.

I'm lost with my new "used" iPod touch 4th gen. Just downloaded iOS 6; seems to be trying to access a WIFI signal but I have it hard wired into my MAC and I do not have WIFI. Need iPod for dummies - very basic and simple help.

On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/

Contact lost with server when i try to close a report

Hi
i have a strange issue with Discoverer plus (Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18))
when i run a report and try to close it, by doing file--close--exit
i'm getting an error "contact lost with server".
any thoughts on this pecuiliar error.
thanks.

Hi,
i'm getting an error "contact lost with server"The problem might exists when your server lost the connection so it would say you to again login.Are you using VPN to connect to your client machine for accessing discoverer plus if so it happens with VPN.
Another thing is in discoverer plus if you leave it inactive for longer time without actually working on it and just opened it and minimized the window,then as it is in inactive state the server contact would be lost.
Best Wishes,
Kranthi.

Connection Lost with keyboard

My PPC iMac G5 keeps saying "connection lost" with a keyboard displayed. The keyboard has new batteries, is paired, and connected. When this occurs no key on the keyboard will work. I can occasionally go to a text editor and get keys to work and then it's OK for a couple of minutes, then "connection lost" again. Does anyone have any thought as to what the problem might be?

Same problem here..
I have a Imac 27 also, OSX 10.6.7
The imac is about a year old..
Everything worked perfektly untill the FIRST BATTERY CHANGE.. (about 5 months after imac was bought )
the keyboard and the magic mouse is making a really hard time for me to do my work...
however, i had this issue for a while now, and apple dont wanna do anything about it..
butthe stranges thing is that,.. for about 3 months ago the magic mousestop doing the connection lost thingi..and works perfectly as normal..(strange)
and now only the keyboard is doing it (batteries in keyboard and mouse allways 100% when i talk about this issue)
so.. bougth an Imac.. everything worked fine.. after 5 months keyboard and mouse starting to flipout..
and about 4 months after that the mouse is fine but keyboard is till flipping out! ( without me making any changes )
Still apple dont seem to care about this...
However i recomend "The Lightbulb conspirisey" - Docymentry film.
It is clear to me that apple is still using PLANED OBSOLESENS in there products,,
and they have no intrest in making sustainable products...
Making economic profit is way more relevent on apples agenda then making sustainable products..
I thought i was paying alot of EXTRA money for the apple products to get the perfection i need..
But noo, they are just masking the usual "PLANED OBSOLESENS" wich is a KEY ingrediens for expanding industries.
And i am very sad that apple dont give a F**** about atcually caring about people. rather then screwing them over...

All files and more lost with software upgrade

hello
my in-laws called me in a panic yesterday. they used the software upgrade to install 10.5.2 and could not find their entourage mail program anymore, it was gone, so were all the files in their document folder. i connected through ichat to their computer (had to set up the accounts again, as the old ones were lost) and yes, it is all gone, though documents they saved in the applications folder are still there.
i called tech support for them and was told that programs that are left open during installation will be deleted. isn't it impossible to continue installation until programs are quit? why would all their files be gone from the document folder? also gone were their ichat ids and safari bookmarks. it felt like an erase and install but all they did was the software install which i assume is a default installation?
no, no back ups for them. they just recently acquired this computer on our recommendation that they would have less trouble with a mac than a pc with vista. but now this.
they will be talking with tech support soon, but i have little faith in them, so i am asking here. what could have happened?
thanks,
marianna

Welcome to Apple Discussions!
One thing which may have happened is this article:
http://docs.info.apple.com/article.html?artnum=107854
However, this is an important lesson for everyone. It is not a question of if data will be lost, but when.
See my FAQ* on backing up as to other possible recovery strategies, and make sure everyone knows never, ever install an update without backing up first. Regardless of the cause, data will eventually get lost, and updates are often the most frequent events where they happen as they change the system much like changing the guts of an automobile.
- * Links to my pages may give me compensation.
Message was edited by: a brody

Child text node lost with newDomNode()

Hello,
I have a simple custom XMLBean compiled from a schema like:
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://mydomain.com/xsd/myBean"
     xmlns="http://www.w3.org/2001/XMLSchema"
     xmlns:tns="http://mydomain.com/xsd/myBean"
     elementFormDefault="qualified">
     <simpleType name="MyType">
          <restriction base="double"/>
     </simpleType>
     <element name="MyElement" type="tns:MyType"/>
</schema>
An the Java code:
import com.mydomain.xsd.myBean.*;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
void myMethod() {
MyElementDocument bean = MyElementDocument.Factory.newInstance();
bean.setMyElement(3.14d);
// this prints the the xml with text including 3.14d
System.out.println(bean.xmlText());
Element dom = ((Document) bean.newDomNode()) .getDocumentElement();
The problem is, after getting the DOM object my calling newDomNode(), the Text
Node for "3.14d" is lost from the DOM tree; i.e. instead of
<tns:MyElement xmlns:tns="http://mydomain.com/xsd/myBean">3.14d</tns:MyElement>
I get XML like:
<tns:MyElement xmlns:tns="http://mydomain.com/xsd/myBean" />
Question: how come the DOM tree is not complete?
Any help is very much appreciated.
-Feng

I fixed the error by upgrading xbean.jar to the one bundled with WebLogic Servcer
8.1 SP2 (I originally had the version from WLS 8.1 SP1).
-Feng
"Feng Xue" <[email protected]> wrote:
>
Hello,
I have a simple custom XMLBean compiled from a schema like:
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://mydomain.com/xsd/myBean"
     xmlns="http://www.w3.org/2001/XMLSchema"
     xmlns:tns="http://mydomain.com/xsd/myBean"
     elementFormDefault="qualified">
     <simpleType name="MyType">
          <restriction base="double"/>
     </simpleType>
     <element name="MyElement" type="tns:MyType"/>
</schema>
An the Java code:
import com.mydomain.xsd.myBean.*;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
void myMethod() {
MyElementDocument bean = MyElementDocument.Factory.newInstance();
bean.setMyElement(3.14d);
// this prints the the xml with text including 3.14d
System.out.println(bean.xmlText());
Element dom = ((Document) bean.newDomNode()) .getDocumentElement();
The problem is, after getting the DOM object my calling newDomNode(),
the Text
Node for "3.14d" is lost from the DOM tree; i.e. instead of
<tns:MyElement xmlns:tns="http://mydomain.com/xsd/myBean">3.14d</tns:MyElement>
I get XML like:
<tns:MyElement xmlns:tns="http://mydomain.com/xsd/myBean" />
Question: how come the DOM tree is not complete?
Any help is very much appreciated.
-Feng

Album Artwork Lost with iTunes 9 – Solution Found

When upgrading to iTunes 9 I lost some, but not all, the album artwork for files I had made from vinyl at 24bits/48kHz. I have since recovered this lost artwork by converting the affected AIFF files to WAVE using Max 0.9.1 and then converting them back to AIFF – the artwork suddenly reappears! Previously if the affected files had been imported in to another iTunes library the metadata was lost – now it sticks.
If your having problems with with AIFF files then I suggest converting to WAVE and then back to AIFF.

I am having exactly the same problem with adding artwork, and I see from browsing the discussions that alot of other people are finding the same issue, but there are no answers! If no one knows what Apple have done to us, or how to get around it, could Apple moderators please let us know what is going on?

Tickle your JSF:Data lost with several clicks

Hi All,
I have a simple form <f:view>
     <h:form>
       <h:inputText id="name" value="#{experiment.name}"/>
       <h:commandButton value="submit" action="#{experiment.vanishMethod}"/>
     </h:form>And in the page bean method i just do this:
public String vanishMethod(){
          System.out.println("****step-in*****");
          try {
               Thread.sleep(1000);
          } catch (InterruptedException e) {
               e.printStackTrace();
          return "success";
     }In my result page i want to display the name:
<h:form>
    Hi how are you!!
   <h:outputText id="out1" value="#{experiment.name}" />
    </h:form>When i try to click on the submit button several times then i lose the name in out and only get this:
Hi how are you!!
Why is my name data getting lost.
I am using RAD 6.0.1 and Websphere Portal Server.
Best Regards,
Pallavi

To elaborate on my answer above, I don't understand your concern. If you have just 1 yr left on your double your data 4 GB plan, then there was no "loophole" to keep your unlimited data when you renewed your contract.
Anyone was able to keep unlimited data when upgrading with a subsidized phone up until late June of 2012. A year ago would put your upgrade at April of 2012 and there were no restrictions on keeping unlimited data at that time.
You are obviously not relaying the "whole" story, but that is not unusual for someone who would like to get out of a contract without paying the ETF.
You either did not have unlimited data to begin with, or you chose to go with the "double your data 4 GB" plan on your own. There was no reason you needed to give up your unlimited data, if you actually had it, when you upgraded.
There must be some other factors involved, such as wanting to save a few bucks by purchasing from a retailer other than Verizon and you are now regretting your decision.

New prompt to upgrade Live Street View which I recently downloaded to replace Google Street View lost with my IOS6. There's 35 pages of TOA. has anyone tried the upgrade

Recently downloaded Live Street View to replace Google Street View lost in IOS6 "upgrade." It's OK, but images are 3" & don't zoom. Today I received a prompt to upgrade Live Street View, but it is preceded by 35 pages of TOA from Apple. I'm suspicious of trusting Apple (again) and agreeing to their terms. Current version of Live Street View isn't ideal, but its still better than what I was left with pre-IOS6. Has anyone done recent upgrade to Live Street View and is it any better than before?

I suspect you have the debug version of Flash Player installed. Can you visit this page to verify that debug = yes?
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_Flash_Play er_version_type_and_capabilities__Flash_developers_only_

Reflashing, and kind of lost with the comands

first of all thank you cpitchford for getting me the os and emmc image, and now everything is set to reflash, i'm a bit lost should i start the commands with flasher-3.5.exe or just flasher-3.5 ???
and now this is my first reflash, ( tried nsu a couple of times to reintsall the software) , so should type the -r in the command or not, and what difference does it makes ?? , please i need quick replies .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

if youre using windows, i think either is fine. normally, i just do
flasher-3.5.exe -F os.bin -f
replace os.bin with the name of the os image (i find it easier to just rename it to os.bin to begin with rather than reallylongfilenamethatidontwanttoscrewup.bin, lol) then shut down phone, hold the u button, then connect to computer whilst still holding u button. then it should boot into update mode, which is nokia logo and usb logo. then if youre in 32bit windows or windows xp mode, it will auto detect (in windows xp mode for 64bit windows, you need to click attach and choose the n900), then the flasher should proceed.
then when its done, type in
flasher-3.5.exe -F emmc.bin -f -R
replace emmc.bin with the name of the emmc file (once again, easier to just have renamed it to emmc.bin to begin with) it should reboot the device and proceed to flash the image.
make sure you dont put in the '-R' command on the os flash, as the -R is for reboot, and you do not want it to reboot after flashing the os image.
note if it freezes on the emmc flash, dont worry about it. just boot up the device and run it without flashing the emmc. it froze for me on the emmc flash, and yet it still runs perfectly fine.
note 2 flashing the emmc.bin file will wipe out all data. so backup first!

I feel lost with this phone! :(

I got the bb 8330 about a week ago and think i've done pretty well but im still lost in the following areas:
how to add a contact to bb messenger?
how to download music from my computer (i downloaded the bb disc and have usb cord) to my bb?
how to send a picture in a sms instead of email (no sms option when i click on the pic, only email)
Can someone pretty please help me?
Thank you, Thank you!
Stacy

For the BB Mess
There are two methods of adding contacts in BlackBerry Messenger. One is via PIN and the other is via email. A PIN is an eight digit alpha-numeric code that is assigned to every BlackBerry device. You can find your own PIN code by going to Options>Status>PIN on your BlackBerry device. If you are requesting a contact by email, you simply need an email address associated with their device.
Method 1—Requesting by PIN
First, you will have to open up BlackBerry Messenger and click the track wheel or trackball depending on the device you have. In the drop down menu, select ‘Add a contact.’ You will be brought to your address book. At the top of the list there will be an option that says ‘[Use Once]’. Select this option and a menu will appear. Click ‘Request by PIN.’ On the next screen you can enter the PIN code of your contact and press enter. You will be prompted to enter a personal message if you choose and press ok. At this point the contact will be added to the pending group in BlackBerry Messenger until the contact accepts you.
Method 2—Requesting by Email
Requesting a contact by email is the almost same process as requesting by PIN. The only difference is instead of clicking ‘Request by PIN’ you click ‘Request by Email.’
Method 3—Adding a contact already in your address book
If you remember back in method one when you were brought to your address book, we selected ‘[Use Once].’ This is unnecessary if the contact is already in your address book. If the contact is in your address book and has a PIN or Email address associated with it, you can simply click their name. Again, you will be given the option of adding a personal message.
Can I create groups to organize my contacts?
Yes, BlackBerry Messenger will allow you to create groups of contacts. For example, perhaps you would like to have a group for family members and a group for work contacts. With BlackBerry Messenger open, click the trackball and select ‘Add Group.’ Here you can enter the name for your new group. Now that you have created your groups, you need to organize your contacts. Highlight a contact’s name in BlackBerry Messenger and click the trackball; select move. A menu will allow you to select the group where the contact should go. Select the group and press enter. The contact will now be listed under that group.

Lost with 8.1.7

Similar Messages

Maybe you are looking for