LOV with all colors

Hi,
I would like to create a dynamic LOV with all the colors in it (return value should be the color-code).
One can create a small table with all color-codes, but that's the easy part.
What would be the syntax of the dynamic LOV?
reg.
Chris

Hi Todd,
Working from Apex 3.0 there is also a item-type "color picker" wich also solves the problem (as mentioned in your link from Andy).
Thanx.
reg.
Chris

Similar Messages

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

LOV with 'ALL' option

I need to create an LOV with individual campus codes along with the option for selecting all of them. For my ALL option (in static list), I have the literal 'ALL' as my display and the string of (1,2,4,5 etc) as my return. This, however, does not work. I have also tried adding tic mark(s) to the string ('1','2','4' etc)... she still no work. Anyone know of a work-around?
Thanks.

radgid is right and its very useful.
but but..... if you explicitly required this thing then try this:
--not tested in Apex but running in sql*Prompt
Create table Campus
(Campus_code Number,
Campus_Name varchar2(30));
insert into campus
Select Rownum, dbms_random.string('a',10) RandNames from dual
Connect by level <=5;
SELECT Campus_Name,
LTRIM(MAX(SYS_CONNECT_BY_PATH(Campus_code,',')) KEEP (DENSE_RANK LAST ORDER BY curr),',') Return_val
FROM (SELECT 'ALL' Campus_Name,
Campus_code,
ROW_NUMBER() OVER (PARTITION BY 'ALL' ORDER BY Campus_code) AS curr,
ROW_NUMBER() OVER (PARTITION BY 'ALL' ORDER BY Campus_code) -1 AS prev
FROM Campus)
GROUP BY Campus_Name
CONNECT BY prev = PRIOR curr AND Campus_Name = PRIOR Campus_Name
START WITH curr = 1
Union All
Select Campus_Name, To_Char(Campus_Code) Campus_Code from Campus order by Campus_Name

Designjet 450c driver with all colors needed

Hello Bob and all others,
I have been also looking for driver to my designjet 450c . I use win7 x64 .
It looks that driver ( hpdj430x64glen ) prints only grayscale pictures.
How could I change it to support all colors. It doesnt give option at anywhere on settings.
Many thanks,
aclarke69 wrote:
Thanks Bob. I followed the instructions to the T on my Vista machine. When I got to step 7 and clicked "Okay", the following message appeared: The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems.
The only thing I can think of is the driver is not made for an x-64 based system.
Oops - it was a critical piece of information missing there, that you are using an x64 system. You will need the x64 version of the driver, which I have never found.
Edit - I do not know how I missed this one, it shoud install on your x64 system. Download the driver here. The drivers installed fine on my Windows 7 x64 system.
Message Edited by Bob_Headrick on 12-02-2009 06:33 PM
Click the 'Star' to say Thanks!
Bob Headrick, Microsoft MVP Printing/Imaging

download and install it its for windows 7 64 and vista 64
http://www.mediafire.com/?r3mogwejgvo
Oooo and its free

Color conversion : special behavior with Spot Color "All"

Hello,
I have a document with printmarks which have a spot color "All". While I convert the page using the "Color conversion" to Gray 1.8 with Adobe Acrobat X the spot color "All" are still present (with the alternate color space DeviceGray).
Using Adobe Acrobat 9.x all objects have a DeviceGray color.
Is it a bug or a new behavior? Moreover the SDK method doesn't convert the spot color but keep the name (but I know this is not the right place to post it - it's just for information).
Regards,
Joe

I sense you may not understand the difference between sopt and process colors in the printing process.
When you use process inks you build all color representations by combining dots of varying sizes from each of the four process colors, cyan, magenta, yellow, and black. Because the dots are two small to be seen individually your brain is fooled into thinking it sees other colors. Process color printing requires four printing plates to produce the full range of colors possible, but that range is limited compared to what you can see in real life or capture in RGB.
Spot colors, in contrast, are similar to paint. Each color is mixed individually, and every spot color requires its own plate on the printing press (and you must use a press -- toner and inkjet printers use cmyk inksets and cannot print real spot colors). Because of the expense of these plates, the use of spot colors is usually limited to one or two colors in any print job, and if the job has other color (like photographs) that requires process inks, converting the spot colors to the closest process simulation is often employed if the spot colors can be simulated "close enough" to satisfy the client and the budget is tight.
I would avoid using process colors for type in small sizes or for very thin strokes, especially in lighter colors, as you are likely to see ragged edges.
So, how many spot color swatches did you use? More than two? More than four? Do you have a huge budget to produce the work? This may be a project that really should be designed from the ground up as process, or process and one spot for that hard to print bright accent color.

My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

Deleting the System Preference or other .plist file
..Step by Step to fix your Mac

My MX 892 isn't printing in all colors. I have replaced all color cartridges with no luck. Any help?

My MX 892 isn't printing in all colors. I have replaced all color cartridges, used the head cleaner option and even tried realigning the print head. I'm still getting mostly yellow images, no magenta or blue. Any help?

I have run a few deep cleaning with fresh ink cartridges. Now the printer will not print any colors.

Photoshop diplays all images with desaturated colors (Images look fine when opened in other apps)

All of a sudden, when I open any image in Photoshop, the colors appear to be desaturated...In Photoshop only. When I open that same image in Window Picture Viewer, or Quicktimer, or even if I drag the image into a brower window, the colors appear fine. But in Photoshop, something is clearly wrong. Now, I can make color adjustments to the image, but when I save and reopen reopen it in another application, I can see that color changes have been made, but they still don't match what Photoshop is displaying.
The images are RGB image...I've checked the color space setings in Photoshop, and they are the default (Edit > Color Settings: North American General Purpose 2 / RGB: sRGB IEC61966-2.1 / CMYK: US Web Coated (SWOP) V2, etc, etc). I also made sure View > Proof Setup was set to: Working CMYK. I even reset Photoshop to it's default settings (by holding down CTRL-ALT-SHIFT on launching Photoshop)...But the images still appear desaturated when I open them in Photoshop...So, I don't understand how this is still a Photoshop problem...But then again, they look fine when I use any other application on my computer to open them, so it's clearly not an issue with my monitor.
The frustrating thing is, I haven't made any changes to Photoshop OR my monitor (that I know about)...Photoshop has worked perfectly for me for years, and now there's this SNAFU that I just can not figure out.
Any suggestions?
I've included a screenshot below to show the disparity between an image opened in Photoshop (on left) and Windows Picture Viewer (on right):
Photoshop image on left, with desaturated colors...Same image in Windows Picture Viewer on right, where colors appear normal.
Any and all help is much appreciated : )
Best,
-Austin

It's difficult to provide help without knowing your level of color-management expertise, but I think you've helped us some with that in post number 2.
Color management is basically this: Images and devices have certain color characteristics, and these are described by color profiles, sometimes also called color spaces.
1. You should not need to use the Proof Setup at all to view your images on your monitor. When things are set up properly Photoshop shows you accurate color without your choosing View - Proof Colors.
2. A color-managed application like Photoshop will try to show you accurate color on your display by interpreting both the image profile and your monitor profile and transforming the colors accordingly. BY DEFINITION this will look different than other applications which don't do color-management as these just pump the image RGB values directly out to the display.
Thus:
If your monitor profile indicates your monitor has a wide gamut, images with embedded profiles may appear less saturated inside Photoshop than from non-color-managed apps.
If you view images that have an embedded wide gamut profile (such as Adobe RGB 1998 or ProPhoto RGB), Photoshop and other color-managed applications will interpret that profile and the colors will likely appear more saturated in Photoshop than in a non-color-managed application.
It sounds as though the first case applies in your case here.
You can check to see what monitor profile is associated with your monitor through OS settings. I'm thinking, based on the caption buttons in your screen grab, that you've got Windows XP, but rather than go further with that assumption, I'll ask you to verify it first.
-Noel

I just got an ipad 2 and I felt in love with it. first time apple user. Thererofe, now I want to repalce all my PC product that I have. Could someone tell me if the IMac is touch screem such the ipad? thanks

I just got an iPad 2 and I felt in love with it. First time Apple user! Unfortunatelly, now I want to replace all my PCs products that I have. Could anyone tell me please if the I Mac desktop has touchscreem and works like the iPad 2?
Thanks

The iMac does not include touch screen capability.
With an iMac, you can choose between a Magic Mouse or a Magic Trackpad. If you want both, there is an additional cost.
http://www.apple.com/imac/design.html

HT4623 hi i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

hi
i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.

My computer is all out of sort with the color and it is in like a negitative effect that i cannot seem to fix. How do i fix it?

my computer is all out of sort with the color and it is in like a negitative effect that i cannot seem to fix. How do i fix it?

Try System Preferences>Universal Access>Seeing>Display. See if White on Black' has been selected.
If so, select 'Black on White'.
Ciao.
Message was edited by: OGELTHORPE

How create LOV(select List) with all LDAP users

Hello,
I am trying to create a selected list with all the users in my LDAP, note my LDAP is synchronized with my OID.
Any suggestions, I'm searching the the pl/sql statment?
Thanks
Hussam

Hi Hussam,
Take a look at my comments in the following two threads -
Re: LDAP
Re: Cookie And LDAP
The two different threads discuss the methods I use to do what you want to do (so you really need to 'combine' the two different threads).
Hope this helps

Filter all colors but one

Can you filter all colors but one in iphoto? I have a picture and you like to show only, say, color red and the rest would be black and white. I have seen it in many pictures and wondered if you can do that in iphoto 9
or any of the IOS apps?
Thank you

Yes-almost yes. There's a $2 app on the iPhone that can almost do it. It's called Color Splash. It can select areas to remove the color from leaving color in the other areas. You can read about it at this MacWorld page: Five Apps That iPhone Photographers Love. Here's a photo my daughter took of her kids:
It's well worth the price IMO.
You can do the same with 3rd party image editors like Photoshop Elements for Mac.
Click to view full size
With Photoshop Elements you can select the color to remain and remove the rest.
Click to view full size
OT

I have a question about the calendar on the ipad2. I have multiple calendars in different colors. Some of the events are filled in with color. Others are just listed with a colored dot in front of the event. Any ideas why events ar showing up differently?

I have an ipad2 and my question is about the calendar. I set up multiple calendars with different colors. Some of the events show up in filled color. Others only show with a colored dot in front of the event. I can't figure out why some show up one way and others show up differently? Any thoughts?

On mine the ones that show on a coloured background are all-day events, the ones with dots and just timed events.

I'm having a problem in FCP7 with all video transitions. Every transition has a rolling flicker throughout the effect. What is causing this?

I recently upgraded to FCP7 from FCP6. I am now having an issue in playback with all video transitions. When I add a transition to my video it does not consistently play smoothly. I now appears to have an old "film" like flicker rolling through the effect. Our video was shot on a dslr and brought into FCP with compressor as a prores 422 file. We use magic bullet for our coloring effects which are in place on this video. When I was working on the project in FCP6 I did not have this problem. When the project was complete we upgraded to FCP7. The client has now come back to us wanting additional footage. So I opened the old project up into FCP7 and checked yes to all format updates to meet with FCP7 guidelines. So far this is the only problem I've encountered. Any help would be greatly appreciated.

Hello!
For me it looks like conflict with field order (upper, lower - interlaced).
Please, check Your sequence settings, maybe it should be set to "field order NONE" if Your source is progressive.
Next thing You could check:
in Your timeline with bad transitions look into "Effecs tab" - maybe FCP 7 added "shift field filter +/-1" after opening FCP 6 project.
In general - try to keep sequence settings same as source settings.

LOV with all colors

Similar Messages

Maybe you are looking for