LR4, PS5, PS6 user defined camera profiles

I'm on Mac OS 10.8. Where are user defined camera profiles stored? I can see older profiles in LR develop module, but cannot locate the path.

Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
It's a hidden folder on 10.8 - go to Finder > Go menu and when you hold down the Opt key, Library will appear in that list.

Similar Messages

  • LR is recognising Colour checker passport but my user created camera profiles don't appear

    HI there, I run OS X Yosemite on a MBP and have Creative Cloud access to LR and PS.  I have Xrite Colour Checker Passport installed.  LR is recognising the Colour checker passport but my user created camera profiles don't appear in the Develop Module.  Anybody else had / have this problem?

    Profiles are camera-model-specific and only for raw files not JPGs. 
    I suppose it’s possible that the folder the profiles are in is not accessible to LR, so you might try changing the permissions to make sure everyone can access them.  I am a PC person so am not sure how to do this but I’m sure Google can tell you.
    If you can’t figure it out, upload the profile file (.dcp) and the raw file that was used to create it and perhaps one more raw file from the same camera that the profile should apply to, and someone else can try on their system, to verify the profile is valid.

  • New notification profiles? User defined notificaiton profiles?

    Is there a way to create a new notification profile? In older BB, I could setup a "Loud" profile that was extra loud, but in the OS10, i can't create a new profile at all. Note I am on OS 10.1.

    Not currently.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • Custom camera profiles, created inside canon camera

    I'd like to ask one question. When I have my own user defined camera profiles, that I created inside my canon camera, how can I preserve or transfer those into the Lighroom?

    PS - I wasn't being a smartypants in my previous post, nor this one:
    Here is the "medium" answer:
    No matter how you slice it, the best you'll be able to do is translate (custom) in-camera profile to a self-created Lr camera calibration profile (and/or other Lr settings), which you can create using Adobe's free DNG Profile Editor. So if you're serious about doing it, that would be step 1 feasibility study...
    If it works well enough, you can use ExifMeta (plugin) in conjunction with CollectionPreseter (or OttomanicImporter) to auto-select your Lr profile (and/or other Lr settings in the form of a preset) based on profile in camera (as read in exif metadata)..
    Rob

  • Camera Profile Re-Installation LR 4

    I have upgraded to LR4, but none of my camera profiles show up. So, I tried to manually transfer the relevant folders and files to reside as subfolders under Library-App Support-->Camera Raw 7.  However, this did not work.
    I would appreciate it very much if someone could tell me how to properly re-install the profiles.  I use several different cameras, so I have an extensive list of Adobe and custom profiles.
    Thanks,
    ina

    I have SOLVED THE PROBLEM!!
    It had nothing to do with Lightroom.  The problem was that, this week I installed the Photoshop CS6 update and had not pointed to the preset folder from CS5 in the CS6 preferences.  Once I did this, all my plug-in and presets appeared in CS6 and, then, when I next opened Lightroom, the presets were available in Lightroom as well.
    Thanks Ian and jim01403 for trying to help,
    Ina

  • Camera Profile

    Creative Cloud 2014
    Windows 7 Pro 64-bit
    XRite Color Checker Passport
    Nikon P7800
    I create Camera Profiles (.DCP files) using XRite Color Checker Passport.
    Adobe Camera Raw (ACR) looks for user generated Camera Profiles in folder
    C:\Users\john\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
    Camera Calibration tab | Camera Profile
    If I do not create a DCP profile for a shoot, the Camera Profile list does not have the default "Matrix" profile for the Nikon P7800. It shows a list of XRite Camera Profiles from my other shoots. Therefore, Camera Profile will use some XRite DCP as a profile no matter what even if you do not want that profile.
    Why is the "Matrix" profile for the Nikon P7800 missing?
    If I delete all the XRite DCP files in folder
    C:\Users\john\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
    ACR now shows the "Matrix" profile for the Nikon P7800 as a selection.
    For some reason, it is missing "Vivid", etc..
    I am not sure which folder ACR places the "Matrix" profile for a Nikon P7800.
    In summary, If there is anything in folder
    C:\Users\john\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
    ACR does not also search in the default folder where default DCP files for the Nikon P7800 reside.
    Why?
    What should one do?
    Having to use a XRite DCP not intended for that shoot (since "Matrix" is not available) makes no sense.
    Thanks in advance.

    You are correct. I goofed.
    I installed the Adobe DNG Converter 8.8 - incorrectly thinking it included the ACR.
    It is unclear why the following page does not have CameraRaw_8_8?
    Adobe Camera Raw and DNG Converter for Windows
    The title of the page would indicate it should include all the ACR downloads.
    I went to the page you first suggested for the latest ACR installer at:
    https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
    After installing "CameraRaw_8_8.exe", "About ACR" now shows the correct version 8.8.0.397.
    Bye-the-way, I am unclear what the difference is between "CC Desktop Manager app" and Adobe Creative Cloud application. I thought the Adobe Creative Cloud application replaced the "CC Desktop Manager app"? Adobe Creative Cloud appears as "CreativeCloud.exe" in the Task Manager i.e. is just an ordinary EXE.
    Further question - As expected ACR does not appear as an APP in the Creative Cloud application list since it is a plug-in. If the ACR is out of date, am I correct in assuming that the Creative Cloud application will say Photoshop is "up to date" since the Creative Cloud application does not look at plug-in dates. However, if the Creative Cloud application says Photoshop has an "update", the update will include the latest ACR plug-in.
    Do you have any idea where Adobe stores the native Camera Profiles for each camera?
    Thanks again for your feedback.

  • Custom camera profiles have stopped appearing in LR4.3/ACR 7.3

    Really odd... I've been using custom profiles that I created using a ColourChecker Passport for sometime now. I just updated LR and ACR to the latest versions, and I've noticed that they are no longer selectable under the Camera Calibration tab - I just get the standard list of profiles for my camera (Nikon D7000).
    I checked in the the relevant folder for LR and they weren't there, but they are in the ACR folder. I copied them across to the LR folder as well, but this has had no effect. In both cases, they're in the root-level folder for all profiles, so in LR's case, they're in C:Program Files/Adobe/Adobe Photoshop Lightroom 4.3/resources/CameraProfiles. This is where both the CCP and Adobe DNG Profile Editor have previoulsy placed them by default - I've never needed to place them in the actual camera model folder itself. Both applications have always found them there without issue.
    Anyone else had this problem since upgrading, or have a solution?
    M

    OK- I am being a total dummy and need some help, please. I have put the KM7D and Sony A700 camera profiles in the above mentioned places
    C:\Users\<yourusername>\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
    C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.3\Resources\CameraProfiles\Camera
    AND am still not seeing them in either PSE11 or in LR4.3
    I also installed CR 7.3 and DNG 4.3 per the Adobe forum.
    So, I guess either it is not working or I am looking in the wrong place in PSE11 and LR to find them.
    I assume in LR I should be in Develop and I look on the right side under Camera Calibration and try to pick it there somehow. If not- where? Where would I find this in PSE11?
    I also tried a little experiment. I have my profiles in
    C:\Users\SRose\AppData\Roaming\Adobe\CameraRaw\CameraProfiles\Sony DSLR-A700
    and I renamed "Faithful" to Faithfula700" and then opened Lightroom and went to Camera Calibration and only Faithful was there- no Faithfula700. So, either LR truncates the file name or there is some internal name in the dcp files that LR uses or these profiles are not being recognized.
    Sorry to be such a noob- everything else I know how to find and LR help was none at all.
    Thanks
    Steve

  • User defined table types sometimes show up a unknown data type in Profiler

    A couple of our users have a problem when using user defined table types. Calls are made using UDTT as variables and these are then passed to a stored procedure as parameters. Sometimes the application returns a timeout. In such situations a Profiler-Trace
    shows the following:
    declare @p4 unknown
    whereas the correct trace (that is sometimes displayed) should be:
    declare @p4 dbo.ReportFilterTableType
    ReportFilterTableType is a UDTT. The users do have correct permissions for the UDTT (otherwise they would never be usable for the user). What could be the reason that the data types for the variable
    @p4 in the example are sometimes returned as unknown and at other times are returned correctly as
    ReportFilterTableType? Could this possibly be a network related issue?
    Thank you.
    Graham Goodwin Email: [email protected]

    I know this is a old post, but i am also facing the same issue that too in my production server. Did you find any workarround for this issue. Please do reply. Critical problem we are facing.
    Alka, Is your problem timeouts when passing TVP parameters, or is it that a Profiler Trace shows type "unknown" for the TVP data type name?
    If your problem is timeouts, be aware that TVPs do not have statistics so the optimizer might not be able to generate an optimal plan for non-trivial queries. Declaring a primary key or unique constraint on the table type may help since that will provide
    useful cardinality information.  You may need to resort to hints in some cases.
    I suggest you start a new thread with details of your specific situation if the information in this thread doesn't help.
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • LR3 to LR4 Camera Profiles?

    While I am aware that Develop Presets will behave totally differently between LR3 and LR4 due to processing differences I have never specifically seen camera profiles addressed.
    Will custom profiles done in LR3 give different results in LR4?

    Thanks guys.
    If you still have your eye on this thread here is another question. I have available profiles for a camera with the same sensor as my second camera (Sony A55 available - A57 not). Is there away by re-labling profile names to have LR use the one marked for the A55 when it reads that the camera is the A57? Could the files/folders be retitled or is the camera info embedded in the profiles themselves?
    Gary

  • How can I create a camera profile in LR4 from my camera

    I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom??

    The camera profiles are only applied to the in-camera JPGs, never to the Raw files.
    This is not only so for your Canon but for every camera that shoots Raw.
    For creating a camera profile in Lr, see here:
    http://help.adobe.com/en_US/lightroom/using/WS939594D8-4279-41b4-B8E9-B06BC919EC7C.html
    http://forums.adobe.com/message/4939724
    http://dpbestflow.org/color/camera-profiling

  • N73 camera, changing default scene to user defined...

    n73 manual says that AUTO scene is default but user can make USER DEFINED scene to be default. how can I do that?
    every time I start camera, there is AUTO scene.

    I think is not possible. Is like that.

  • What is the significance of define status profile for user status

    hi friends
    what is the significance of define status profile for user status. what does it contain
    Regards
    Vinny
    Edited by: vinny novice on Dec 29, 2008 1:53 PM

    Hi
    please see Kathir's article on ststus profile
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/supplier-relationship-management/how%20to%20configure%20user%20status%20in%20mysap%20srm.pdf
    regards
    Muthu

  • Screen "Define Status Profile for User Status" should not open in changemod

    Dear all ,
    After following the path CRM>SPRO>SAP IMG -->Customer Relationship Management -->Transactions -->Basic Settings --> Status Management -->Define Status Profile for User Status.
    the screen opens in change mode & allows user to carry out the changes, this is very crucial screen & hnece should not be in open mode ,kindly advice on closing the same.so that it opens only in display mode for production system.
    Regards

    Hi Milind,
                 To Block changes to any Object their is a Provision for the same in Client Deatils Screen
    Go to TCode:SCC4
    Check the Tab Cross-Client Object Changes
    Try setting the Option (3.No Changes To Cross-Client Customization Objs)
    Following Options Symbolises:
    Changes to the Repository and cross-client Customizing permitted
    There are no restrictions on the maintenance of cross-client objects for the client when this setting is used. Both cross-client Customizing objects and objects of the SAP Repository can be maintained.
    No change to cross-client Customizing objects
    Cross-client Customizing objects cannot be maintained in the client with this setting.
    No change to Repository objects
    With this setting, objects of the SAP Repository cannot be maintained in the client.
    No change to Repository and cross-client Customizing objects
    Combination of both restrictions: Neither cross-client Customizing objects nor objects of the SAP Repository can be maintained in the client.
    (Choose This One it Should Resolve your Problem)
    Hope it answered Your Queries..
    Thanks and Regards,
    RK.

  • Source user defined in DIP Profile

    Hi all,
    When I'm creating profile for my DIP profile, I'm not able to find suitable source for my business. So I've to add my source there. Is there a way to define new source in DIP Profile without using SM30?
    Thanks in adv,
    Latu

    Hi virendra,
    I've used SM30 indeed to add user-defined source, but it just add the source. How can I add 'logic' for that one?
    Pete,
    -edit-
    That page is protected with password. May be I have to ask my boss for the password Can you please give me the url of that DIP ebook?
    I've read the note, but I can't find user exit for RRB. anyway thanks for the page Pete.
    Edited by: arif_latu on Aug 11, 2010 7:40 AM

  • How can we add user defined fields in My Account Profile?

    Hi,
    When adding new field for user,user groups,my resource,organizations and request all exist in the drop down menu list but the MyAccount(In the page where we add user defined fields).
    Please help me to add user defined field in MyAccount also.
    Thanks in advance.

    Hi,
    As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
    Regards
    Nitesh

Maybe you are looking for