LSO Course Program Issues (Need Instructions)

We are currently investigating the need for the course program functionality at our organization and have setup a few with mixed results. We are running LSOFE603 and have been live for over a year so the portal and configuration appears to be correct. If I subscribe to the course program then a course program can not be found error is displayed. In addition to this I can book in the seperate course types from the learner portal but titles seems to be missing from the display.
Does anyone know where I can find clear step by step instructions on how to setup a course program? Everything checks out okay from our setup but we continue to have issues. Thank you in advance for your response(s).
Regards,
Matt

use lso_pvct > Create Course program
Enter abbrev, name, language, & save
when you save, it will ask you to manage course blocks.
you can create sequential or non-sequential course blocks.
You must save the blocks before you can add course types to them.
Once saved, edit the course program > Course blocks
add your course types to the blocks; either sequenced or non-sequenced.
config for course programs is
1) number range intervals
2) relationships for the course type object EK
3) Define object type > Structure search LSO-l-ek
4) Followup for course type EK

Similar Messages

LSO Course Program Objects - EHP2

Hello, everyone I am on a LSO Project and we have applied the EHP2 BSP, and we dont not see the Course Program Object "EK" within the list of Course Object, nor do we see the relationships that are associated with Course Program. Can anyone tell me how to correct this issue.
Keith

I am in the same situation. When I go to Delivery methods I can create the delivery method ( it should be in the menu as item 12) as a 9012 as the Delivery attributes exist. I just don't have the object - s/b EK

LSO Course Programs - set up correspondence

I have done some basic configuration to enable automatic correspondence for course programs (delivery method 0012), and it seems to be working because I can see the messages in SOST. However, when I click the correspondence history button in LSO_PSV1, the following message is displayed:
No correspondence history is possible for delivery method Course Program
Message no. LSO488
If I turn off automatic correspondence in configuration, I am able to see the pending messages in the worklist. Once I'm in the worklist, I can switch to the history log with no error. But I can't get directly to the history log from LSO_PSV1.
Is there a switch somewhere where this is activated per delivery method?
Thanks,
Trina

SAP released a note to address this issue:
http://service.sap.com/sap/support/notes/2079341
Here are the manual instructions. Note that there are two fields in table labeled "Corr. History Support". Check the first one.
Go to transaction SM30
Enter "LSOTFORMP_C" for Table/View
Select "No Restrictions" for Restrict Data Range
Click on "Maintain"
Check the tick box for Corr. History Support for Attribute 0012
Save.

LSO Course Program Follow-Up

Hi there,
We are using Course Programs (EK) for many of our training programs. We opted for either Course Programs or Curriculum Types but the beauty of Course Programs is it only shows learners (during follow-up) that have completed the required Course Blocks.
We don't follow-up the Course Program itself, only the participants. This works great because Administrators can jump into the Course Program and if any new people appear in the follow-up, the Administrators automatically know they have been followed-up in all the required courses in the required Course Program Blocks.
The only gripe we have is that the Course Program Follow-Up doesn't flag whether a learner has Passed or Failed the courses within the Blocks.
For example, Person A has PASSED all courses within the Required Course Program Blocks.
Person B has FAILED all courses (or a portion of courses) within the Required Course Program Blocks.
Because both these learners have been followed-up in these courses, they both appear in the Course Program Follow-Up. But obviously Person B has NOT PASSED the Course Program. It would be great if it flagged this.
The only workaround we have is that our Administrators need to run a Particpants Booking report (LSO_RHXBUCH0) for every single person to make sure they have passed. This is becoming very time consuming and it would be nice if there was a way for the Course Program to somehow flag this.
Is this just wishful thinking? Is there any solutions or BADI's that can do this for us?
Any information would be greatly appreciated.
Thank you.
Shaun

Hi Shaun Kitching,
Do you have Booking for personal an organizational unit? If so, As a result, you Run the Reports for org.unit and see the result of all bookings.
Otherwise, you can use BADI's that can do this.
Regards,
Shirin

LSO Course Program

Hi,
We are using ECC6 EHP3. While subscribing the course program i am getting the error An error occurred while checking the subscription to the course program . Please help me.
Regards,
sushma

Hi Chetan,
I have already implemented SAP Notes 1343228,1247792 , 1140483, but still problem is there.
I have checked`backend from Tcode LSO_SUBSCRIBE_CP, system is not showing the Participant selection filed. so from sap backend also i am not able to subcribe.
Regards,
Sushma
Edited by: SUSHMA P on Jul 20, 2009 12:38 PM

LSO : Course Appraisal Issue

Hi All,
Please let me know whether its mandatory for Training Administrator to create Appraisal Document for each participant for the course manually or is there any way out to automatically create the document for all partipant of the course.
A quick reply will be appreaciated.
Regards,
Deb
Edited by: Debdarshan Panda on Dec 17, 2008 9:44 AM

Hi Debdarshan,
Did you ever get an answer on this one? Or are you using a manual process`?
We're looking into the same issue at the moment
Best regards
Jakob

I signed up for the edge program and need to send back my old phone. The instructions say I need to put it in the edge bag provided with my new phone order, but no bag is in the box. Can I get one at a store? Please respond!!

I signed up for the edge program and need to send back my old phone. The instructions say I need to put it in the edge bag provided with my new phone order, but no bag is in the box. Can I get one at a store? Please respond!!

monkeybuttqueen,
Thank you so much for reaching out to us today. I hope you are enjoying the new device! I do apologize that you didn't get the proper info sent to you to send back your old device. You can always print a label online from My Verizon. You can do that at www.verizonwireless.com/printlabel Pleaes keep us posted if you have any questions or concerns.
KevinR_VZW
Follow us on Twitter @VZWSupport

SAP LSO impart qualification on course program block

Hello,
I am trying to solve a problem with course programs. As you know you can create course blocks within a program. What I want to do is have qualifications imparted on the completion of each block. Unfortunately, the "follow-up" process that imparts qualifications is done only on the completion of the entire course program. Does anybody know of a Badi or user exit - or any solution - that will allow me to impart a qualification upon completion of a course block?

Hi Ben,
Does your course block have a required sequence to it? If so, perhaps you could impart the qual based on completion of the last course type within the course block as a workaround...

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

When I'm installing iTunes, it says I'm missing a program that the installer is attempting to run, but it's not telling me which program it needs. The installer is able to run through about most of the install, but near the end, this error kills it, help?

Well basically like it says in the question, when the installer runs through to what I assume is near 90% completion, an error message pops up saying that the installer is unable to find/run a program it needs, and as helpful as it is, the installer neglects to tell me what program I need to download/install for the iTunes installer to complete, as it is, I am at a total loss for how to resolve the issue, I couldn't find anything about this on FAQ's, but if it's there, please let me know; however, I'm welcoming all advice, thank you.

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

hp
The answers are in the details, and you have not given us enough details to help you.
Right now I am guessing at what you seek. Are you trying to use your HP Touch Screen to do your
Premiere Elements importing, editing, and exporting and the Touch Screen movements are not working
to do what you want to do in Premiere Elements?
Have you configured the HP computer Touch Screen? Using the Touch Screen, what cannot you do
that you can do with the mouse?
HP Support document - HP Support Center
If I am guessing correctly here, does the mouse work instead of the Touch Screen to allow you to
work in the program.
I suspect that Premiere Elements does not support Touch Screen and you will end up using a mouse, but I would need to do more homework on
that.
This is not Adobe. Rather user to user. If you are dealing with the current version, 13, you might want to contact
Adobe about the matter. More on that later, once you confirm the above or let me know that I have completely
misinterpreted your question/concern.
ATR

How to assign course program block elements to Course Block

Hi !
I have created a Course Program and added course program blocks but i am not able to add Course Block elements to it.
Please guide me how to do this. Is it related to EHP level ? We are at EHP3 level.
Anand

Hi Priya,
Thanks for the reply,
Added the elements as suggested. Thanks once again
Now on the portal i am able to search the Course Program but not able to see any detils. Hence not able to subscribe also.
Can you throw some light on this issue please?
Why am i interested in "Course Program" is becuase our Training institutes has requirement of assigning five (5) Web-based trainings to a group of Management Trainees.
Out of these 5 WBT, one is mandatory for group & out of remaining four they have to complete any two.
I have tried to work-out this through Curriculum but it is not working the way we want. So interested in "Course Program" & its usability.
Thanks & Regrads
Anand...

LCD monitor display issue, need help

I have a strange problem with my LCD display, it goes like this:
When I first boot up the mac and the wallpaper appears on the display the image looks perfect, all the tones are right etc, but as the startup progresses, programs loading etc, the display changes suddenly, becomes too bright in the highs, too dark in the lows, and over-saturated in between. Its looks horrible.
I have just discovered that I can correct the issue by going into system prefs, display, selecting the options tab (next to Display and Color) and turning overscan on, then back off, voila, all fixed.
Looks great.
Thing is I have to do this every time now that I start the computer, and Im wondering if anyone knows what causes this issue and if theres anything I can do as a more robust solution.
The kicker is I have the same problem with a viewsonic LCD on my secondary machine (Powermac G5, Osx 10.4), right at the beginning of startup it looks great then suddenly all goes wrong, too dark/light over-saturated. Its as if the image has been blended with itself in multiply mode a la photoshop.
And on my second machine there is no option for overscan so I cant use my quick fix.
Is overscan a feature of the OS or the monitor?
The worst part is I need these displays to work correctly because Im a graphic designer, I need my colors to look right so I can do my job, and while I could go buy a $1000 monitor its not possible atm, and Id kinda like to know why this problem occurs. So if I do buy a different I can be assured the problem wont rear its ugly head again. But I dont think the problme is the monitor. I think its something to do with the communication between the display and the computer.
The monitor can display correctly, and does for a brief moment, then it all goes very wrong. Ive spoken to NEC and they werent much help but Ill be trying them again today too.
But again, I thinks its the computer, not the monitors as I can reproduce the issue swapping out monitors.
I hope Ive described it adequately,
Thanks in advance for any help forthcoming, this is very frustrating and is causing me endless headaches.

Mattdp,
I am currently having the same problem with my 20" cinema display. Did you ever find a long term solution? Apple states that the PowerMac G5 is legacy with no support available, and suggested a reset the PRAM. I did so to no avail. I too have 10.4.11 and thus no "overscan" to turn off. This is my wife's primary computer for her photography business, and the color issue needs to be resolved as quickly as I can find the answer.
Is there a possible solution through the terminal?
Rick

Need Instructions for installing AE card in dual G5 tower

I need instructions for installing a AE card in a dual 2 GHZ powermac G5. I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor. My G5 is presently connected to a netgear router and I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router. Any help would be appreciated.
ron

] I need instructions for installing a AE card in a dual 2 GHZ powermac G5.
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
]I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor.
You are going to need the t-shaped external aerial otherwise this is not going to work. Even though your PowerMac did not come with an Airport Extreme Card built in, it would have been supplied with the aerial.
You will need to find a replacement.
]I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router.
I am presuming that your Netgear is not wireless.
Can you connect the Airport Express to the router are do you want it in a different room?
You will be able to be connected to the router and AX at the same time, but in order to avoid internet and network issues, you should ensure that built-in-ethernet is above Airport in the network configurations.

IMovie video issue need some advice.

My imported video on iMovie does not playback properly. After dragging a clip to the timeline and playing it I encounter a problem. The video stays in one frame and does not play but audio plays throughout the entire clip. What could be wrong? The imported file format is .mp4. It works flawlessly in QuickTime but for some reason it has issues in iMovie. I can't figure it out. I also want to add that the .mp4 file was transferred via USB stick to my Mac from my PC capture card. I don't know if this has something to do with it. I assume that it shouldn't since a compatible format with iMovie. Any help would greatly be appreciated.

I am running out of tricks. If the following does not work, I would suggest you contact Apple.
Here are two or three more things to try.
1) Right-Click on one of your clips. Then Reveal in Finder. There should be a named iMovie Event folder with all your clips in Apple Intermediate Codec. Make sure all the clips open in QuickTime Player and are full length.
2) If so, it is possible that there was a crash or hang during the thumbnail and analysis generation process that would occur after the transcoding to AIC. So I would recommend you drag to the trash any Folder in the Event Folder such as Image Stabilization, Thumbnails, or Cache. Take care not to delete the real AIC clips. After doing this, shut down iMovie. For good measure, restart your computer. Then restart iMovie. It should recognize this as an event without thumbnails and start to regenerate the thumbnails, stabilization, etc.
3) If that does not work, go back to your original clips. They should be in the iMovie Original Movies folder. Depending on where your Event is stored, this will either be in the Movies/iMovie Original Movies folder on your startup drive, or in the iMovie Original Movies folder at the top level of an external drive. Try reimporting them into a new Event Name.
4) If that does not work, there may be ways of transcoding your mp4 files outside of iMovie, but this should not be necessary. Shout back if you need instructions for how to do this.

LSO Course Program Issues (Need Instructions)

Similar Messages

Maybe you are looking for