LV 5.1 program Exec.vi call doesn't function after LV 6 installed

My LV5.5.1 program runs Resman via the SysExec.vi and
worked until LV6i was installed concurrently on the same computer. Why did the LV5.1 Exec.vi function quit
working? If I just create a Vi that just executes a
SysExec.vi I get the same result.

Hello,
In order to help you with your question, it would be helpful if you could answer the following questions:
(1) Can you run any executable (which you have verified you can run from the command prompt on your computer), besides Resman, from your LabVIEW 5.1 System Exec.vi?
(2) Can you run Resman from the LabVIEW 6i System Exec.vi? If not, can you run any other executables?
(3) If Resman is the only executable which you can no longer run using the System Exec.vi, can you still run Resman outside of LabVIEW?
(4) What version of NI-VXI do you have installed on your computer? You can check this in Add or Remove Programs from your Windows Control Panel.
Your answers to these questions will help me answer your main question.
Regards,
Sonya W.
Applications Engineer
National Instruments

Similar Messages

  • Microphone doesn't work after Windows clean install

    I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
    I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
    I have tried the Toshiba Software Installer but it didnt help
    I have tried both drivers on toshiba's website for Realtek but it still doesnt work
    driver_audio_realtek_TC40053600B.exe
    driver_audio_realtek_TC40064600A.exe
    Anything else I can try. Please help
    Thank you.

    Satellite A135-S4677
    After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
    1st Hardware Drivers & Hardware Utilities
    1) Chipset related
    2) Display
    3) Sound
    4) All other hardware drivers & hardware utilities
    2nd Toshiba Utilities & Toshiba Software
    1) Toshiba Value Added Package (TVAP)
    2) Toshiba Flash Card Utility (sometimes included in the TVAP)
    3) All other Toshiba utilities and Toshiba software
    Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
    So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
    Intel Chipset SW Installation Utility for Windows 7 (32/64)
    Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
    Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
    Please let us know what happens. Good luck.
    Mike

  • Outbound call doesn't disconnect after call end

    Have you ever seen something like it:
    I make a call from my ip phone (3911 or 6921) to an external phone (ex: cell phone: 084645727) and the call works fine, but when cell phone turned off the call, on my ip phone the call still connected,  ip phone  show me on display that the call still active, the call is just disconnect when I put the phone onhook.
    I use CUCMBE: 7.1.3(SU2)
    Cisco 2821 : c2800nm-spservicesk9-mz.124-20.T4.bin
    debug vpm signal
    BHEGV1#R2 Got Event R2_ALERTING
    *Nov 25 07:42:36: show voice call status
    CallID     CID  ccVdb      Port             DSP/Ch  Called #   Codec    Dial-peers
    0xD8803    20E8 0x48177B78 0/1/0:0.3        0/1:1  *2125463737 g711ulaw  7500/40
    0xD8847    1C9D 0x48177B78 0/1/0:0.1        0/1:3   7434       g711ulaw  1/7500
    0xD88B2    26E8 0x48177B78 0/1/0:0.28       0/1:5  *087068998  g711ulaw  7500/30
    0xD88B6    27E8 0x48177B78 0/1/0:0.27       0/1:2  *084645727  g711ulaw  7500/30 (it is my call)
    0xD88BD    1D22 0x48177B78 0/1/0:0.2        0/1:4   7491       None      1/7500
    0xD88C0    28E8 0x48177B78 0/1/0:0.22       0/1:6  *084743874  g711ulaw  7500/30
    After cell phone turned off the call, the debug vpm signal just show me it:
    *Nov 25 07:42:50: htsp_process_event: [0/1/0:0(27), R2_Q421_OG_ANSWER, E_DSP_SIG_1100]
    Does anybody could help me !
    Regards.

    Hi All
    I had this issue with Oi and EBT, not sure if this is the same, but i had an issue where the Voice channel in clearfwd - I was facing the Bug CSCtd74470, there a workaround but the upgrade of the GW to Version 15 works properly, the output of the "sh vo po sum | include clearfwd" will confirm if this is your case.
    Also in others situations I solved my issue applying the command timeouts call-disconect 3, under E1 Port
    Please rate this post
    Cheers
    Bruno Rangel
    "Se você quiser alguém em quem confiar, confie em si mesmo. Quem acredita sempre alcança"
    Renato Russo

  • Sample java program which will call SAP bapi function to get PO details from SAP

    Hi all,
    I am new to bapi with sap, Any one guide me to interface with sap in java to get details from PO order,From Java end if i put particular PO number it will get details about PO from SAP...Any one guide me r send sample code..
    Thanks in Advance.
    Thanks
    Baskar.

    hi guru,
    Can you please send me the same to my e mail as well...
    my email address is [email protected] ..Thank you
    Regards,
    Baskar.

  • Adobe CS doesn't launch after OSX clean install

    My Mac had been having various small problems recently and it was becoming very slow. I decided to back-up all my work and perform a clean install of OSX 10.3.
    The installation was successful, and I proceeded to install all my applications including Microsoft Office, Adobe CS1, Corel Painter, etc. and I also purchased Extensis Suitcase Fusion on-line.
    Everything works fine and my Mac is noticeably faster, except for Adobe CS1. PhotoShop, Illustrator and InDesign will not launch. PhotoShop doesn't even get as far as the splash screen and quits without even an error message. Illustrator and InDesign also quit before they've fully launched, but with those apps I do get the message which pops up saying that the application has unexpectedly quit.
    I've not loaded any fonts apart from the default system fonts which were installed with the OS. I've tried re-installing CS1. I've tried deleting the prefs for Adobe applications and also Suitcase Fusion. I've also tried repairing the disk permissions for my HD using Disk Utility. Finally I've run Disk Warrior on my HD, but none of these have helped.
    If anyone has any suggestions please let me know. It looks like my only option is to re-install the Operating System again, but I'd like to avoid that if possible. Any advice appreciated!
    800 MHz PowerPC G4   Mac OS X (10.3.9)   1.5 GB SDRAM

    The odds of a corrupt font on a fresh install are small but the quitting seems like a font issue.
    There is a scan program/option in Suitcase which checks for corrupted fonts.
    Try running it.
    You can also open Font Book and turn off fonts and try seeing if any of the fonts in your system are to blame. For this testing you will need to leave your mac on and test CS with fonts off. If you disable any of the system fonts you must re enable them befor shut down or you may not be able to restart.
    Read this article on fonts before attempting the above trick. It might help to print it out.
    http://discussions.apple.com/thread.jspa?threadID=122011&tstart=0

  • ITunes doesn't open after Yosemite is installed

    I just downloaded the new OS X Yosemite and the new iTunes 12.0.1, but somehow my iTunes won't open.
    I clic on the icon but it doesn't do anything. Can you help me?
    imac 2011  -  OS X Yosemite 10.10

    I am having the same exact problem, and it started happening after I upgraded to Yosemite as well.
    Computer:
    - 2014 13" Macbook Pro with Retina Display (MacBookPro11,1)
    - 2.8 GHz processor
    - 8 GB RAM
    - 256 GB Flash Storage
    - OS X 10.10

  • Macbook doesn't work after trying to install yosemite

    Hello to everyone,
    I have a macbook pro 13 8gb RAM and i7.
    I had a problem before installing yosemite, when I switched it off it was always spinning the circle without really shutting down.
    So I decided to create a USB driver with diskmaker x with on it Yosemite.
    To install it with a clean way so I pressed alt while I was switching it on and I went in disk utility I initialized the Hard disk (750GB) and then I setted as reboot disk the yosemite usb driver... while it was running it I saw some interferences on the logo white page (like thin lines blue and red green..) so I switched it off I tried again and it said to me after a while impossible installing yosemite file system verify or repair failed.
    So I tried to initialized the main hard disk again repair it and downloading yosemite via wifi...
    An error occured and I saw the folder with " ? "...
    Now I tried to start it but it doesn't work, I select the hard drive, I don't see disk utility anymore and once I select the hard disk it start a page and it stucks on the page with apple logo and the bar under it which is incredible slow to advance...
    What can I do?
    Many thanks

    hi ariell!
    yes, after i click on the icon the hour glass shows up. and yes i have norton anti virus
    okay, if you've got Norton Internet Security 2005 (it's the firewall that we're interested in, rather than the antivirus), let's try giving the trusty Lorraine M technique a whirl:
    Lorraine M: NIS/itunes problem rectified
    love, b

  • ITunes doesn't load after trying to install the newest version

    Hi. About three days ago when I opened iTunes it asked if I'd like to update. I decided too. After instaling when I opened it I got a message..I'm not sure what it was now, but it said something about needing a new version of Quicktime to opperate. So I downloaded the newest Quicktime. I no longer got that message, however, iTunes will not load. I get the little loading arrow, however thats as far as it goes. My dad tried to fix it and noticed iTunes is running in the background. But only in the background.
    I completely uninstalled iTunes and re-installed it from my disc. It still won't load. I'm getting really frustrated because I want to update my iPod and am unable.
    Any help please?

    Hi vinyamar
    I wonder whether you are getting the common conflict problem with Norton AV (or any other AV/antispy software for that matter)
    I would recommend this approach
    1.Back up your entire iTunes library folder preferably into a separate drive or external memory first. Search the forums if you are not sure how to do this.
    2.Ensure you download the iTunes programme to your pc (save to desktop for example) not try to install online.
    3.Once you have downloaded iTunes 7 to your pc, disable your AV/Spy software before you try to run the install.
    4. Run the install, then reboot and allow your AV/antispy programmes to come back on (if they don't automatically on restart)
    Try opening iTunes
    If you have done this, and it still doesn't work, it may be your chosen AV software and/or firewall is not allowing iTunes to start up. Check the setting on your software in this regard.
    I appreciate it is very frustrating when this happens, but be patient and search the forums. There are fixes for just about every problem!:)
    In the worst case scenario you may have a nasty little virus which is blocking your iTunes launch. If you don't get any luck with the earlier method, try downloading and running EWIDO (an AV programme) scan and see if that helps as well. www.ewido.net/en/
    It is free and incredibly useful in removing certain adware and malware that prevent iTunes from installing on Windows. Good Luck.
    Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP   SP2 20Gb iPod

  • Call a Javascritp function after a validation failure

    Hi all,
    I have a javascript function that is executed on page load. (it works fine)
    Now I need to call it after a validation failure
    How I can implement this call ?
    I am using Apex 4.0.2 and the inline notification, so the page load event is not fired
    which "activation" event can i use ?
    regards
    saverio
    Edited by: tirone on 17-giu-2011 9.00
    Edited by: tirone on 17-giu-2011 9.04

    Thank You Tyson for your quick replay,
    and .. I apologize me for mine bad English.
    My problem is that after a validation failure (with in line notification) the page load event IS NOT fired (in some case): so my script is not executed.
    I would like to execute this script however and I don't know where and how to call it.
    I give You more detail ......
    I'm working on a page that contain a tabular form; in this form, using my script (called "disable_field"), Ii set to read-only some fields.
    I call my script in "Execute when page load" section of page definition.
    If the validation failure is produced by an update of some records in my tabular form all is OK : the inline notification is shown, the page is re-loaded and my script is executed.
    If I add a new record and, after the submit, a validation fail, the page IS NOT reloaded (I don't know the why) and my script is not executed (so all fields are modifiable and this is not how much I want)
    I will appreciate very any help
    regards
    saverio

  • Icloud doesn't work after a clean install of windows 8 pro and office 2010

    After installing the  'iCloud Control Panel for Windows v2.0' on my cleanly built laptop. I now getting the following error after activation the mail option under the iCloud Control Panel 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again'..
    I have done this add also added a second email address and change the new email address to be the default email address.
    I've also done the following as well....
    Ideally the error message you have mentioned is related to iCloud. But you may try these steps as you have already tried re-installing the iCloud control panel and sign in back to sync with Outlook:
    Check if there is any new updated version of iCloud released for Windows 8.
    1. Sign out from iCloud control Panel.
    2. Go to Outlook -> Click on File -> Options -> Add-ins.
    3. Select Com Add-ins in Manage -> Click on GO.
    4. Disable all the Add-ins -> Click OK to save the settings.
    Now go to iCloud Control panel and sign into the iCloud account. Open Outlook and check if you are able to sync.
    however the same original error still accures. can i also point out i have delete the all the os and applications and started again by rebuilding the os windows 8 pro but this time using ms office 2013 and the error 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again' happens again als did option 1-4 from above as well and the error still happens.
    Any Idea's?

    Windows 8 is not supported on Boot Camp, that may or may not be part of your issue but it makes troubleshooting difficult. Post in Microsofts forums as well, that error message is not limited to Boot Camp installations, regular Windows users also get it.

  • Bluetooth doesn't function after installing windows 8.1 on DV7 4190sd

    Warm hello tot you All,
    I have a Pavilion DV7 4190SD  PC XE258E
    Windows 8.1 has been recently installed.
    Tried everything to enable my installed Bluetooth again.
    Didn't succeed even after 5 hours trying several solution.
    I think i miss the real knowledge to solve this problem.
    Please, please, please, who is the saviour here on this interesting site :-)
    Thank you in advance.
    God bless,
    John Rijntjes
    Holland
    email     [email protected]

    Hi
    >>after the installation of 8.1 did u tried updating all the drivers
    >>please gop to device manager and try updating the drivers online
    >>or else try reinstaling form the recovery manager
    Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
    I am an HP employee

  • Software Update doesn't work after new SSD install

    I just installed a new SSD into my five year old MacBookPro (CoreDuo). I am taking the opportunity to reinstall from the ground up, getting rid of a lot of the cruft I've gathered over the years. I installed 10.6 fresh from the DVD and then ran software update. I could update iTunes, Airport, etc, but couldn't run the 10.6.6 combo updater. I was told that the file was corrupted during download and wouldn't expand.
    I downloaded the standalone combo updater from the website and that worked fine. However, when I went to install the drivers for my printers via the System Preferences function, I get the same error. Is there a setting or something that I missed?

    In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
    Use a Ethernet cable until you can change the WIFI
    WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots

  • HT1710 password doesn't work after archive and install

    I was advised to do an Archive & Install, without preserving info to see if it would fix a weird slowness issue.
    I just did the Archive & Install, and when it restarted, it showed my name and photo, but it wouldn't accept my password. I can't login. All I can do is restart or shut down.
    I rebooted from the install CD.  Same thing.
    I rebooted in safe mode. Same thing.
    Help!
    Paula

    Are you using Filevault?
    Are you using Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.

  • SD card doesn't work after XP SP3 install on Satellite P10

    I have a Satellite P10, which has a built in SD card reader. I got Windows XP SP3 from Microsoft update a few days ago, and suddenly the card reader couldn't see any SD card larger than 128MB. It was listed in device manager with a exclamation mark by it - and didn't show up as a removable drive in My Computer. Error message was "Device cannot start - Error Code 10"
    I uninstalled SP3 , and it works again. I've tracked it down to this hotfix which is included in SP3:
    http://support.microsoft.com/kb/934428/
    If I install this on it's own I get the same symptoms, and uninstalling it cures it again.
    So for the time being I can't install SP3. Does anybody know if it's possible to remove a single hotfix from a service pack?
    thanks
    Doug.

    With a little help from MS support I've fixed this issue. In this hopes that it helps someone else, this is what I did.
    1. Uninstall SP3, and reboot into SP2.
    2. Copy the following files from c:\windows\system32\drivers to somewhere safe: sdbus.sys, sffdisk.sys, sffp_sd.sys. I put them on my desktop. They should all be version 6.0.4061.1
    3. Install SP3, and reboot.
    4. Shutdown, and restart using F8 to go into Safe Mode.
    5. Log in as Administrator (or another account with admin rights)
    6. In C:\windows\system32\drivers rename each of sdbus.sys, sffdisk.sys and sffp_sd.sys.to have a .old extension.
    7. Copy the files you saved in step 2 to c:\windows\systems32\drivers
    8. Shutdown and restart normally.
    And that's it. Hope that helps.
    regards
    Doug.

  • Satellite A50 doesn't function after BIOS update

    Hi All,
    I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
    The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E
    I have tried suggestions in following link
    http://askiris.toshiba.com/ToshibaSu...200%2035586212
    However, this did not work.
    However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.
    Can someone please help me with
    1. How can I perform the BIOS update to get my PC running back.
    2. Point me to links where I can find the files in the above link.
    Many Thanks in advance.
    Best Regards,
    Parag

    > 1. How can I perform the BIOS update to get my PC running back.
    Not possible if your BIOS ROM module was wrong flashed.
    If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.
    > 2. Point me to links where I can find the files in the above link.
    There is no link! You will have to ask the ASP for the help.
    Bye

Maybe you are looking for