Lync Desktop Sharing paused when asking for a admin credential

Is there any solution from microsoft side for the above mentioned question?

Not at this time.  It was reported that running Lync as administrator could help, but this hasn't been a reliable solution.
Edit: I just reran this to see what it looked like for me as a refresher.  When Lync is run as administrator, the remote user can't click the UAC boxes that allow the program to run in administrative mode, however if I as the sharer of the desktop click
Yes, then the remote controlling person then seemed to have access.  Again, it's not a great solution, this is by design, and not slated to be changed in Lync 2013.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

  • Lync Desktop Sharing pausing for actions an administrator needs to accept

    When using Lync desktop sharing on a user that is a local administrator on their computer, the lync desktop sharing session pauses each time I try and execute a program or go into the registry? UAC is active on the users computer and we are not going to
    turn this off for security reasons. We have used other products like Cisco WebEx, Citrix Desktop Sharing, LogMeIn, etc... and they don't have a problem with the UAC prompts, only lync is having these issues. Is there a patch or a setting
    somewhere to allow these evelated privilages for a lync desktop sharing session?  

     I'm visiting these threads because I also would like to use Lync to assist my end users within a screen sharing session.
    Let's say my Sales VP has an issue, and uses Lync to contact me.. we start a screen sharing session, and I see how I can fix it... but as soon as admin permissions are needed, we're stuck... I can't see or type my admin creds, and I'm not going to tell him
    to type mine in.. so I either have to switch to LogMeIn, RDSH into his machine (more disruptive) or hike over to his office, (where our offices are on a 90 Acre park...if he's even on-site)
    It would be most excellent if named users could be assigned permissions within 365 so that they could perform help desk tasks, where Lync recognizes admin credentials and allows administrative tasks to be performed on the host.
    Bringing this feature to Lync would be a real benefit.
     I would love to ditch LogMeIn as their business model is changing, and anyway, they're not free.
    So what are the technical or security challenges here?
    best regards.

  • How Lync desktop sharing works for internal users

    Hi,
    How Lync desktop sharing,  Aplication sharing & A/v conferencing works Internally ?
    is it uses Webconfrencing Edge server & A/V Conf Edge server for internal users also...
    I have confusion on this please help me and guide me how to deploy internally.
    does it works with edge server internally if yes how ?
    Thanks !!!

    No internal to internal conferencing, A\V and desktop share does not use the Edge Server. This is all handled by the Front End Server\s.
    For assistance on deploying please refer to http://gallery.technet.microsoft.com/Lync-Server-2012-9d6fe954
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Lync Sorted blog

  • Things which can break Lync desktop sharing

    Proxy URL filter
    For one of my customers, Lync desktop sharing suddenly stopped working only from a particular network. All required ports were opened, telnet , tracert all fine, also sometimes we saw it working , so it was intermittent.  you can guess what security
    and network team will say J.
    Then captured traffic in netmon and it shows that there is reset for 443 traffic and uccplog shows error which points to 443 inspection device on the network , so shared it with network and security team, you wouldn’t guess their response this time
    J they asked me to identify the device which is resetting 443 session.  Now I only had to solve this issue, I knew even PSS engineer can only tell us that there is reset.
    I started off with question  How it works some times?” , answer to this is that whenever it worked someone from Local IT team has logged in to that computer, also when logged in as normal users netstat shows time wait for 443 and sometimes sharing invitation
    expires.  This gave me a clue, so I asked for a new laptop which is not a member of any domain and started drilling down. ..Finally found that URL filtering rule has been applied to users in that subnet and corp application FQDNs are not bypassed. It
    was URL filtering application which was stopping this traffic.
    I told security team that proxy is causing this issue GUESS WHAT they asked me why they were not informed about Lync FQDN earlier
    J
    WAN optimizer.
    It was another lovely day in office talking all important topics like work life balance, movies , next best weekend place etc… suddenly tickets started flowing for desktop sharing issue. Immediately P1 case was opened and all of us specialist joined P1 bridge
    just to say WE DID NOT DO ANY CHANGES! Now someone is surely jealous of someone being happy or someone has not followed the change process. Who it is? And what it is has to be investigated, of course  by Lync team.
    Again netmon says 443 rest and error message says 443 inspection.. Being a Microsoft application  expert you are not done yet without finding out which device is doing it, isn’t  it? . So started isolating the issue. Noticed that issue is happening
    only from specific region only. So asked everyone on call what is so special about this region…there was a dead silence and there was a smart answer YOU TELL US! Well this went on for a while till someone from network team asked with low tone
    will wan  optimizer has any impact on Lync traffic??
    J
    It was WAN optimizer which was causing this issue.
    Regards
    Praveen R

    Thanks for sharing your experience. This is what the case with all of us serving this technology.
    ~ Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer". ~ This forum post is based upon my personal experience and does not necessarily reflect
    the opinion or view of Microsoft, its employees, or other MVPs.

  • I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

    I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

    Hi Rosera,
    This is bad and I am sorry to hear that you are running into these issues.
    Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
    It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
    Have you tried the steps mentioned below by Barbara?
    If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
    Regards,
    Ankush

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • Help! artlayer.textItem returns undefined when asked for a valid property like baselineShift

    This is driving me nuts:
    When asking for a property of a textItem like baselineShift, and that property has not been manually set by the user before, it returns undefined even though it may have a default value, as evidenced in the Character properties panel. Is there a workaorund to this bug?
    To replicate:
    • Put a paragraph style textfield into your document
    • Put in some text
    • Do not change any of the default values
    • alert(app.activeDocument.activeLayer.textItem.baselineShift)
    [ result: undefinded]
    • Now set the baseline shift in the properties panel to say 15
    • alert(app.activeDocument.activeLayer.textItem.baselineShift)
    [ result: 15 px]

    When working with textItem properties it's good practice to always wrap access and have default value (and maybe user warnings), it can just blow up For example sometimes accessing justification gets in a bad state and only help is resetting the setting in UI.

  • I am unable to sign into icloud.  When asked for my date of birth I receive a message that my dob does match Apple's records.  I don't remember setting a different password for icloud.

    Since I replaced my iPhone 4 with the 5s I have been unable to access icloud.  When asked for my password I receive the message that it is not valid.  wehn using the security questions the system does recognize my date of birth. 

    You can have the password reset sent to the email address associated with your ID, as explained in the second option here: http://support.apple.com/kb/HT5787.  If you don't have access to the email address, you'll have to contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.

  • 2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS.  The Hdd is recognized in system profiler. Any ideas?

    2007 Intel Imac, installed a new Hdd. Started up with the install disc but it doesn't find my Hdd when asking for a destination volume to install the Mac OS.  The Hdd is recognized in system profiler. Any ideas?

    Welcome to Apple Support Communities
    The hard drive is not formatted, and it must be formatted in "Mac OS Extended (Journaled)" in order to install OS X.
    Close the OS X installer, and go to Utilities menu (on the menu bar) > Disk Utility. Then, format your hard drive in "Mac OS Extended (Journaled)" as Format > http://pondini.org/OSX/DU1.html Finally, close Disk Utility and install OS X

  • I changed my apple id, but in apps store when asked for password,  original apple id appears so password doesn't work wit it.  Now can't buy apps.

    I changed my apple id, but now in apps store when asked for password, it listed my original apple id which password will not work.  How to get apps store to recognize changed apple id?

    f you updated your existing account then try logging out of it on the device by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

  • My brand new Mac ProBook keeps asking for an admin password to download Adobe Flash Player

    My brand new Mac ProBook (OSX Mavericks 10.9.4) keeps asking for an admin password to download Adobe Flash Player and also when I try to set up adding my printer. The problem is that when I initially set up this new laptop--I opted to not have any password upon login. So what is my admin password that it keeps requesting??--that "I" did not create??

    I have heard that Adobe Flash Player and Apple OS & iOS do NOT care much for each other.
    Now half of Youtube videos would NOT play and many websites would NOT show on my Mac computer.
    This is absolutely rediculous!
    Because of the unfair monopoly, I have switched from Microsoft Windows PC to Apple Mac system a few years ago.
    Is it a MUST and worthy for corporations to compete each other by screwing up customers like this?
    What a shame!
    Big things have small beginnings and so do big failures!
    I think I will delay the idea of buying any more OS or iOS products until I can easily watch all the Youtube videos and browse all the websites!

  • Maverick install is asking for an admin password which I never set up to begin with.

    Maverick is asking for an admin password which was never set in the beginning.  I have tried all help suggestions to no avail  Help

    I got to the same problem, because I have'nt an idea about my administrator password.
    So I did reboot with command + R, then open Terminal, then define an administrator Kennword, then restart with pull down menu.
    Restarting and opening the user ...(Systemeinstellung;Benutzer) the new setted password works, it is, it can be used to unlock user administration. But willing to start Maverick.....it does not work.
    So at this time no Maverick....
    Has any one a clue about what has to be done?

  • I am trying to install vmware fusion and during the install it continues to ask for the admin password to install.

    I am trying to install vmware fusion 5-1.0.2 on osx 10.8.2 and it just keeps asking for the admin passoword for the computer.  I keep putting it in with no luck.  I have installed other programs with no issues.

    If yours is the only user account on the Mac, it will have Admin privileges by default, so just type your password. Provided the installer is legit (i.e., downloaded from VMWare's servers and not some shady place), it needs Admin privileges since it needs to add stuff in the innermost folders of the OS for virtualization to work.
    If your user account does NOT have admin privileges, you will need to have someone who does install Fusion for you. No way around this.

  • "Home Shared" Apps are asking for original iTunes Account?

    my Dad just got his iPad (64GB WiFi) and asked me to set it up for him (register, transfer content, etc)
    i've had mine (32GB 3G) for a while, so i have a bunch of apps (free and paid).
    i've never used _Home Sharing_ before but i figured that would be a better solution that re-downloading all these apps of mine to his MacBook Air or over WiFi to his iPad so i enabled _Home Sharing_ between his MBA and my MacBook Pro.
    i only transferred iPad apps. no other content.
    everything went fine. until one of the apps on his iPad had a software update. when he went to the App Store, on the iPad, it prompted him for MY iTUNES ACCOUNT and MY PASSWORD.
    *what am i doing wrong here?*
    *is this how home sharing is supposed to work?* (that he has to enter my iTunes account info or be stuck with whatever version of the app lives on his device at the time of the initial "Home Share"?)
    we live together but are rarely on the same network so really, this was intended to be a one time setup to get him started.
    Thanks in advance,
    L

    This situation of yours doesn't seem to be any different from my experiences over the years while using my iMac, iPhone, and my wife's iPhone.
    While using each device, we just sign in to iTunes using my own userName and password each time. It works, marvelously. (I didn't think about that five device limitation when recently adding our new iPad, though.)
    Each and every time we sign on to iTunes, it asks for userName and password. This is an essential task for Apple, otherwise they would lose accountability.
    Are you upset that your father cannot enter his own iTunes userName and password? Well, if he has his own account, then he had an iTunes library different from yours. If your father did not purchase the app being updated, then would you expect Apple to provide a free update based on his userName and password? (Don't hold your breath.)
    It's OK to have two or more iTunes accounts. If you want to let your father update your apps for you, then let him enter your iTunes userName and password when it is requested. (I bet he already knows what those vital statistics are!)
    Accounting is a nightmare for most of us, isn't it?

  • Control Lync desktop sharing between different subnets

    Hi all..I want to control desktop sharing between differnet network.You consider this as we have multiple process.So desktop sharing should not work between other federated partners.
    I have federation with xxxx.com for one xxxsubnet
    another federation with yyyy.com for different yyysubnet
    if i allow ports for desktop sharing with federated partner from both the network between theses partners all users can do desktop share.
    But i neeed a solution like xxx subnet can share desktop only with xxx.com and yyy can share desktop with yyyy.com
    Jayakumar K

    Hi,
    The feature is not available at present. But you can try to use lync Server SDK to customize this feature.
    http://msdn.microsoft.com/en-us/library/gg455051.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for