Machine

HI,
By which transaction code we can check machine history.
Please give me the solution for this.
Thanks,
Pintoo

hello, friend.
try the following t-codes:
1. List of notifications - IW28 (Change), IW29 (Display) IW30 (Display multilevel)
2. Historical orders - IW61 (Create), IW62 (Change), IW63 (Display)
3. Order list - IW38 (Change), IW39 (Display) IW40 (Display multilevel)
4. Operations list - IW37 (Change), IW49 (Display)
regards.

Similar Messages

How can multiple users use the same Creative Cloud Individual on one single-machine?

We have one shared graphics workstation, which is infrequently in use by different people - therefore we bought a single-workstation license (which we were referred to "Creative Cloud Individual"). In the FAQs it says it installs locally, but whenever a user different from the installing adminstrator logs in, he is forced to use the trial.
Is there a way to make the local installation usable on that single machine for multiple users?
Thanks in advance for your reply

Serenatasystems do the other users not have administrator access? What happens if they sign in using the Adobe ID tied to your Creative Cloud subscription? Do your Adobe Creative applications then exit trial mode?

Error while opening a report in FRstudio client machine.

Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanks

I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format

I don't know what's going on with my iomega external hard drive. Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
Ten days ago, I had trouble backing up my iMac using Time Machine. After turning it off and restarting my external hard drive, it backed up successfully.
However, today I am trying to back up my files, and TM tells me it can't find the external hard drive. Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format. It does turn on, and I could restore my computer to an earlier back up.
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
Have tried verifying and repairing using Disk Utility, to no avail.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it. I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

Back up using time machine and external hard drive

Hello,
I am having a difficult time deciding the best way to back up important documents.
I have:
1TB internal hard drive
3 TB external hard drive and
1TB external hard drive
I currently have about 1TB worth of data to be stored, but that will increase to about 1.5TB once I get a bunch of stuff off the HD camera's hard drive. I would like to keep my internal hard drive somewhat free to keep the computer running fast, but also want to make sure I am properly backed up.
Should I put ALL (or nearly all) of the files on the 3 TB external hard drive, and have time machine back that up and not worry about the rest? I'm a little weary about putting all of the files on one device even if it is backed up by TM.
If I do this, do I need to back up the 3 TB external drive in addition to using TM?
Thanks!

iMac11,2
OS X 10.6.8

Can not see historical data in Time Machine backup

Hi folks
First my setup:
   MBP Late2012
   Samsung Evo 840 SSD
   external USB 3.0 1TB as TimeMachine HD
   Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
      Stoiker

Hi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.

Installation problem on Intel - IV Machine

Hi,
I am having Intel P-IV machine, with 845 motherboard, sdram, seagate hdd and tnt vga. when i am trying to install solaris 8 in my machine after proceding upto booting from disk (or) cdrom i have selected cdrom then, when i say 1. Interactive or 2. Jumpstart, after selecting Interactive Installation my system is rebooting automatically.
Can any one tell me the solution regarding this issue.
Thanks in advance,
Mohammed Abid Ali

This case is similar to the case handled by Jurgen Keil on Digest Number 385 except that my case, it has a different error message.
At the prompt "Select type of installation" (or the prompt
"Select (b)oot or (i)nterpreter:", I type the command "b kadb -d". I see a General Protection Fault and some messages which cause the system to reboot. But I can't capture all the errors/messages cuz there's no system dump device configured.
How do I configured the system dump device so I can send you more details?
Thank you.

Installation problem on Dell P4 machine...

While I was trying to install Solaris 8 to a Dell P4 machine (8100 series), after the "Copyright..." line, the installation process never gets to the section where it should display "Configuring /dev and /devices".
Each time the installation gets to the menu to choose the installation method (Interactive or JumpStart), after running a few more processes, the system displays "Skipping System Dump: No dump device configured" and then the machine reboots. It keeps doing the same thing over and over but I do not see any error message and the screen clears rigth away when it reboots.
Any help would be appreciated.

This case is similar to the case handled by Jurgen Keil on Digest Number 385 except that my case, it has a different error message.
At the prompt "Select type of installation" (or the prompt
"Select (b)oot or (i)nterpreter:", I type the command "b kadb -d". I see a General Protection Fault and some messages which cause the system to reboot. But I can't capture all the errors/messages cuz there's no system dump device configured.
How do I configured the system dump device so I can send you more details?
Thank you.

Mixing memory module of different sizes in G5-8 slot machine

is there a problem with Mixing memory module of different sizes in G5-8 slot machine
I have 2gb on four slots with 512 memory chips
Can I upgrade my memory with 1gb chips in the remaining four slots.

Hi epospiech-
Yes you can.
Instructions here: Memory (DIMMs) Replacement Instructions
Luck-
-DaddyPaycheck

How to delete file from client machine

Hi all,
we are using the DataBase: oracle:10g,
and forms/reports 10g(developer suite 10g-10.1.2.2).
can anybody help me how to delete the file from client machine in specified location using webutil or any
(i tried with webutil_host & client_host but it is working for application server only)
thank you.

hi
check this not tested.
PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
IS
-- Open a stored document --
LC$Cmd Varchar2(1280) ;
LC$Nom Varchar2(1000) ;
LC$Fic Varchar2(1280);
LC$Path Varchar2(1280);
LC$Sep Varchar2(1) ;
LN$But Pls_Integer ;
LB$Ok Boolean ;
-- Current Process ID --
ret WEBUTIL_HOST.PROCESS_ID ;
V_FICHERO VARCHAR2(500);
COMILLA VARCHAR2(4) := '''';
BOTON NUMBER;
MODO VARCHAR2(50);
URL VARCHAR2(500);
Begin
V_FICHERO := V_ID_DOC;
LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
--LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Path := 'C:';
LC$Fic := LC$Path || LC$Sep || LC$Nom ;
If Not webutil_file_transfer.DB_To_Client
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
Raise Form_trigger_Failure ;
End if ;
LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
If LN$But 0 Then
Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
LN$But := Show_Alert( 'ALER_STOP_1' ) ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Raise Form_Trigger_Failure ;
End if ;
If Not webutil_file_transfer.Client_To_DB
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
NULL;
Else
Commit ;
End if ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Exception
When Form_Trigger_Failure Then
Raise ;
End ;sarah

Safe to delete file from Time Machine hard drive?

Is it safe to delete a file from an external hard drive that's being used for Time Machine backups? The file is not a backup -- it's a .dmg from the manufacturer of the hard drive. Other than that one file, I don't use the drive for anything other than Time Machine.
I'm just concerned because I don't want deleting the file to affect Time Machine in any way.
Thank you.

I have done it without issue.

Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!

The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

I am trying to remote into a Windows Server 2003 from a Windows 7 machine and having issues

I am trying to remote into a Windows Server 2003 from a Windows 7 machine. It says "The terminal server has exceeded the maximum number of allowed connections".
My first stop in trying to solve this problem was here:
[URL="http://www.howtogeek.com/howto/windows/command-line-hack-for-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"]howtogeek.com[/URL]
And it says:
[I]
[INDENT]This problem happens because Windows only allows two remote terminal services connections when you are in administrative mode, and you’ve either got two people already on that server, or more likely, you’ve got a disconnected session that still thinks
it is active.
The problem with this error is that you have to actually get on the server console to fix the problem if the server isn’t in a domain. ([B]If you are in a domain, then just open Terminal Services Manager and log off or disconnect the sessions[/B])[/INDENT][/I]
So it seems to suggest that all I have to do really is to run the Terminal Services Manager but I cannot find it.
This web site from mssqltips.com [URL="http://www.mssqltips.com/sqlservertip/1981/remote-desktop-error-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"](click here)[/URL] says all I need to do is first execute "mstsc /
admin" from the command line. But, when I do that, I get a message when I try to remote to the server, that says this: "To log on to this remote console session, you must have administrative permissions on this computer".
So, what now? What do you suggest?

Hi Bobby,
Yes, it is by design. By default, Windows Server only accepts two concurrent administrative sessions (Administrative Mode). It means that only two administrators can work on the server at
the same time.
If you would like more concurrent sessions, you need to purchase RDS CALs, install Terminal Services related server roles with proper configurations on the server.
Remote Desktop for Administration (server 2003)
http://technet.microsoft.com/en-us/library/cc785186(v=ws.10).aspx
What Is Terminal Services?
http://technet.microsoft.com/en-us/library/cc782486(v=ws.10).aspx
Terminal Services Configuration
http://technet.microsoft.com/en-us/library/cc787078(v=ws.10).aspx
Purchase client access licenses
http://technet.microsoft.com/en-us/library/3660ac5a-7468-48d3-b7e8-5529de8fb6c5
Thanks.
Jeremy Wu
TechNet Community Support

Time machine won't back up since I have restored from time machine following hard drive replacement. I am being told there is not enough space, however the back up is less than the hard drive size

We recently had the hard drive replaced on our Mac as part of Apple's replacement programme. Prior to sending it off for repair we did a final Time Machine back up, which was completed successfully. SInce getting the computer back we restored everything from the backup disk using Time Machine, which all worked fine, however now we are having problems with it completing regular backups. We receive a message each time telling up that the backup disk doesn't have enough space on it. It is telling us that it needs in the region of 370gb and only has around 30gb available. The computer hard drive is in the region of 350gb and the hard drive is a 400gb one. It is almost as if it is not recognising that the data already on the disk is the back up of this computer and is trying to complete a completely separate back up as opposed to just updating the backup already on the disk.
Has anyone else got any experience of this and therefore could give me some hints on what to do. I am reluctant to wipe the backup drive and start again, however I would prefer not to have to buy another hard drive if I can avoid it as this one is technically big enough
I look forward to getting some responses

Hi, I never use TM myself.
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.
PS. It's generally recommended a TM drive be at least twice the size of your main drive.

I own Acrobat XI Pro. I installed it on my new machine, but cannot start it because Acrobat says that the serial number I have doesn't match the software. What should I do next? Can' find any FAQ's on this.

I deactivated Pro on my old machine, downloaded from the store on my new machine and tried to open it. A window popped up that said I had a valid product key, but that it didn't match the software on my machine. The drop down box did not list my product. Don't know what to do next.

Machine

Similar Messages

Maybe you are looking for