Mail trigger upon the updation at different occassions

Hi,
I am having the requirement of trigering the mail automatically at only three occasions (Only updations ) : System should not trigger a mail if there is any modifications in the table.The occassions are as follows:
1.Mail should trigger at the time of creating some entry using the transaction code.
2.Mail should trigger at the time of updation (Line item No.1) in some fields using the same transaction code. ( In this transaction code, both edit and create icons are there. there is no seperate transaction code for edit mode )
3. Mail should trigger at the time of updation (Line item No.2) in some fields using the edit mode of  the same above transaction code.
Please suggest me as how we can set the conditions in the program so that system can realise these three occassions. Because the information contains the email will be different in three occassions.Also we have done the worlflow part for triggering the mail automatically upon the saving of the data.
Please throw your ideas,
Regards,
Suresh.

Solved

Similar Messages

  • Mail trigger to the customer

    HI
    we have the scenario like , we create the quotation in CRM and after creation we release the quotation , after release at the time of saving the document , system has to trigger a mail to the customer that is quotation printout .
    So for sending quotation printout , what is the standard smartform i have to use and assign to the action "Smartform mail". and also from the activity transaction say suppose we are creating Meeting activity and i maintain the list of attendees in the Meeting activity transaction (attendee also a partner function) and i will assign list of employees as a attendees in the meeting trasaction and i have to trigger a mail or some alert to the list of attendees whom i maintained in that particular transaction as " Meeting is going to held on ....................date  Etc.,)

    Hi Marthanda,
    You can try using Actions to meet this requirement.
    Check the BO event getting triggered when you save the document after releasing the quotation.
    Check this in SWEL t-code.
    Now create an Action which should trigger when this event is triggered in the system.
    You can attach a smartform at an output of this ACtion, which can be used to send mail to the customer.
    Hope this helps!
    Regards,
    Saumya

  • TS3694 problems with mail after doing the update on my iphone 4s, anyone else had this issue?

    After updating to the newest software I am having problems with opening email, anyone else having similar problems or know how to fix this?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • HT4623 problems with mail after doing the update on my iphone 4s, anyone else had this issue?

    After updating to the newest software I am having problems with opening email, anyone else having similar problems or know how to fix this?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I was running Firefox on another computer that lost it's motherboard, was able to salvage the harddrive, but my mail files on the older hard drive have a different name, how can I pull or import those older files into firefox running on another computer?

    I had been running other email clients for years and finally switched to Firefox. All the while importing my other email folders. So I had quite a large history of email. I had been backing up my system using Acronis for years. My desktop's motherboard crashed and was not worth repairing. I pulled my desktop hard drive and turned it in a standalone drive. I re-established my email on a laptop starting from scratch using Firefox. I would like to import (if possible) the emails history that is stored on the standalone drive (formerly my old hard drive). However, the names of the mail folders on the drives are different. For example: current computer the mail folder is named garlic.com. On the standalone drive (old hard drive) there are several folders and they are named, for instance; mail.garlic.com, mail.garlic-1.com , and so forth. it goes up through garlic-4.com.
    How can I pull or import these older folders into my current email folder and see all my old email archives?

    You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
    You need to get a new computer or a refurbished one.

  • Cannot send msn-mail after the update

    After the update of OS X, I cannot send email (via httpmail) using my "old" msn account through Mail (prior to the update, I had no problems). Getting the mailbox updated, reading mails etc. is not a problem.
    Tried reinstalling httpmail.
    Tried changing the Server Port to 587.
    Hints would be highly appreciated.
    Lars

    Mail.app is short for the Mail application that I assume you are using as your email client to receive and send messages with your email accounts.
    If this is correct and to confirm, you are accessing an email account provided by your ISP (which is Verizon) with the Mail.app in addition to your Hotmail account and you are able to send messages with your Verizon account but not with your Hotmail account.
    If correct, go to Mail > Preferences > Accounts and under the Account Information tab for your Hotmail account preferences at the SMTP server selection, select the Verizon SMTP server to send messages with your Hotmail account and when quitting Preferences, select OK to save the changed setting when prompted.

  • Mail trigger from VK11

    Dear Gurus,
    Iam aware that mail trigger to the concerned is not possible in std SAP when we create/update condition records in VK11/VK12.
    Still, my client requires that wjever a new pricing record created/amended in VK11/VK12 an automatic mail should trigger to a set of internal org people. How to ahieve this?
    Pls suggest any development method.
    Thanks.
    Reg,
    JJ

    Table KONP will have all VK11/VK12 related data. Any new creation or change will have a unique Condition record number.
    So what you can do is that you create a zee table where you can have fields like
    a)  Created by
    b)  Existing rate
    c)  Valid from
    d)  Valid to
    e)  Changed by
    f)  Changed rate
    g)  mail id the user
    etc., and as and when new condition record gets updated in KONP, a mail should trigger to the users you maintained in the zee table informing about the creation / change of condition record.
    thanks
    G. Lakshmipathi

  • Is itunes 10.4.1.10 for real? I just got the update availability notice but it opened my browser and went to the itunes download page. Normally it just opens a small list with what is going to be downloaded (us. safari, quicktime, and itunes) and i am abl

    (cont.) e to choose what is going to be downloaded. Im just a little suspicious what with the update coming differently than it usually does.

    Check this thread out -> iTunes 10.4 & Multimedia Keyboard
    It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
    pikot wrote:
    Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
    - You need to open a text editor (like notepad) as an administrator.
    - Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
    - Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
    iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
    - Save the file
    - Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

  • Mail trigger  - Background job

    Hi Experts,
                     I have faced one problem in Mail Triggering. to the User.
    Our Requirement is,
                    Whenever we execute one report ( ALV output) in Background , The Output should go the user thro mail ( automatic Mail trigger when the background Job is finished)
             if anybody knows, plz guide me to do it.
    With Regards,
    Mahesh.

    Hi Dude,
    Execute This Program as it is.UR requirement will be full filled .
    Here the important Thing is the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      tables
        packing_list               = it_packing_list
        contents_txt               = it_message
        receivers                  = it_receivers
    Hope this Code helps U.
    *& Report  ZSENDMAIL
    report  zsendmail.
    parameters: psubject(40) type c default 'Testing'.
    PUSH BUTTON
    data: it_packing_list like sopcklsti1 occurs 0 with header line,
    it_contents like solisti1 occurs 0 with header line,
    it_receivers like somlreci1 occurs 0 with header line,
    it_attachment like solisti1 occurs 0 with header line,
    gd_cnt type i,
    gd_sent_all(1) type c,
    gd_doc_data like sodocchgi1,
    gd_error type sy-subrc.
    data: it_message type standard table of solisti1 initial size 0
    with header line.
    *START-OF-SELECTION.
    start-of-selection.
      perform populate_message_table.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
      perform send_email_message.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
      perform initiate_mail_execute_program.
    *& Form POPULATE_MESSAGE_TABLE
    adds text to email text table
      form populate_message_table.
      data : itab type table of sflight with header line.
      data : lv_itab(255) type c.
      select carrid
             connid from sflight into corresponding fields of table itab
             where carrid = 'LH' and connid = '0400'.
      loop at itab.
      write : / itab-carrid , itab-connid.
      concatenate itab-carrid itab-connid into lv_itab separated by space.
      append lv_itab to it_message.
      endloop.
    endform. " POPULATE_MESSAGE_TABLE
    **& Form SEND_EMAIL_MESSAGE
    *send email message
    form send_email_message.
    *fill the document data.
    gd_doc_data-doc_size = 1.
    data: tab_lines like sy-tabix.
    describe table it_message lines tab_lines.
    read table it_message index tab_lines.
    gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + strlen( it_message ).
    **POPULATE the SUBJECT/GENERIC message ATTRIBUTES
    gd_doc_data-obj_langu = sy-langu.
    gd_doc_data-obj_name = 'SAPRPT'.
    gd_doc_data-obj_descr = psubject.
    gd_doc_data-sensitivty = 'F'.
    **describe the body of the message
    **information about structure of data tables
    clear it_packing_list.
    refresh it_packing_list.
    it_packing_list-transf_bin = space.
    it_packing_list-head_start = 1.
    it_packing_list-head_num = 0.
    it_packing_list-body_start = 1.
    describe table it_message lines it_packing_list-body_num.
    it_packing_list-doc_type = 'RAW'.
    append it_packing_list.
    **add the recipients email address
    clear it_receivers.
    refresh it_receivers.
    it_receivers-receiver = 'KRK'.   "p_email.
    it_receivers-rec_type = 'B'.
    it_receivers-com_type = 'INT'.
    it_receivers-notif_del = 'X'.
    it_receivers-notif_ndel = 'X'.
    append it_receivers.
    it_receivers-receiver = 'OBT'.   "p_email.
    it_receivers-rec_type = 'B'.
    it_receivers-com_type = 'INT'.
    it_receivers-notif_del = 'X'.
    it_receivers-notif_ndel = 'X'.
    append it_receivers.
    **CALL the fm TO post the MESSAGE to sapmail
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      exporting
        document_data              = gd_doc_data
        put_in_outbox              = 'X'
    importing
       sent_to_all                = gd_sent_all
      tables
        packing_list               = it_packing_list
        contents_txt               = it_message
        receivers                  = it_receivers
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.
    **store function module return code
    gd_error = sy-subrc.
    **GET it_receivers return code
    loop at it_receivers.
    endloop.
    endform. " SEND_EMAIL_MESSAGE
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    **instructs mail send program for sapconnect to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
        submit rsconn01 with mode = 'INT'
        with output = 'X'
        and return.
      endif.
    endform. " INITIATE_MAIL_EXECUTE_PROGRAM

  • Where i can find the update 5.1.2 for my LabVIEW RT 5.1

    I have LabVIEW RT 5.1, and i need to update it to 5.1.2.

    Please send an e-mail message to NI Engineers by visiting http://www.ni.com/ask, and select E-mail NI under Communication Method. Select LabVIEW Real-Time as the software platform. In your e-mail message, request the update from LabVIEW RT 5.1 to 5.1.2.
    Regards,
    Chad H.
    Applications Engineering
    National Instruments
    http://www.ni.com/ask

  • Updated to the new 6.1 last week. I pay a fee to read a local newspaper monthly and now since the update I have to put in e-mail and password every time i read a different article

    updated to the 6.1 last week. I have a app for a local news paper that I pay a monthly fee to read on line and now since the update I have to sign in every time I read a diffrent article. What changed?

    Has the app in question been updated to the latest version?
    Has the app developer been contacted?
    What troubleshooting, if any, has been tried?

  • I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. Help!

    I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk.  Does anyone have any suggestions?

    Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
    At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
    You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
    In the future, do not move any of the preinstalled applications. Leave them where they are.

  • Since running the update, my mail is messed up.  Light saying connected to internet is green but SMTP's (connection Dr)  are red.  Is there a setting I need to change?

    I ran this update on my Mac.   Everything else seems fine BUT mail isn't connecting to the servers.  I've opened connection Dr.  says I'm connected to the internet but none of the servers e.g., gmail, or yahoo will connect anymore.  What do I try?
    About the OS X Mavericks v10.9.5 Update   This is the update I just ran.

    I just went back through and went through the port settings after looking up what should be there.  Why were some of them different after the update?
    I did make a couple changes to the port #'s and restarted my computer again.
    I opened the connection Dr.  says my internet is fine but still not receiving or sending email.  still shows that email is not connecting.
    I know the esp's work ( I finally figured out esp vs isp)  My email is up and working on my iPad so it is working MUST be a setting.
    it is 3:45 my time and I'm off to work for 4 pm - so this is another 3 hours of reading and working on this to try to reinstate my emails on my home computer.  Thank goodness my iPad wasn't mucked up too.
    I'll go through with a fine tooth comb after work at 10 tonight.
    I appreciate your help.

  • Is the data exchanged with the Apple Servers during a manual/itunes ios update any different between a PC and Mac?

    When performing an ios update with an ipsw file, data is exchanged with an apple server to complete the update to the newer ios version.  Without an internet connection to the apple server the update does not complete.
    Can and Apple software engineer please answer if there is anything done differently during this data exchange process between a Macintosh vs a PC?  If not here within the forum, can someone provide me a phone number, email or mail address to contact to get this information?  The answer is very important to the organization that I belong to.
    From a privacy standpoint, I assume the device name and perhaps some other data is submitted to verify the identity of the device being updated but is any personal information submitted like email, contacts or any other data potentially typed by the user sent during the connection to the Apple update server?
    My understanding is that user generated data, settings and apps are handled entirely with the backup file if ones is created?
    Dan

    Apple does not participate in these forums, so you will not get a reply from an Apple engineer, nor will there be any way for you to contact anyone in the iTunes or iOS engineering team.
    I do not, however, think that there is any difference between the Mac and Windows versions of iTunes in what information they transmit to Apple's services. In either version no personal information of any sort is sent when only doing an update to iOS, only to the best of my knowledge the device identification so that the correct update file can be delivered. The only time any of your contacts or any other such information would be sent to Apple's servers is if you are synchronizing via iCloud, and emails only if you use iCloud's email service.
    My understanding is that user generated data, settings and apps are handled entirely with the backup file if ones is created?
    Except for synchronizing with iCloud, that would be correct. This may be of interest:
    http://support.apple.com/kb/HT4865
    Regards.

  • HT1430 on my iphone I am getting a "Cannot Get Mail" prompt says " the connection to the server failed. My mail last updated 1-31-14(the last time it would retrieve  mail

    on my iphone I am getting a "Cannot Get Mail" prompt says " the connection to the server failed. My mail last updated 1-31-14(the last time it would retrieve  mail) Ive done the turn on and off thing,thanks

    i had this problem a couple times. Try:
    1) to restart your iPhone (turn off and then on)
    2) connect to a different network or use cellular (it may be a network problem)
    3) delete your mail account from Mail app, and then add it back in
    4) create an icloud backup of all your data, restore through iTunes and then restore from icloud
    hope this helps. cheers!

Maybe you are looking for