Mail wont print in English

I am getting a string of Squares with letter A inside each when i tried to print an email in English !

Tom & lllaass
1. The APP. was apple email client-
2. Lnaguage selected : English
3. Other apps print ok
4. Msg doesnt read ok.- I think its a font issue not language issue. because i noticed another mail message which i tried to print, whereby most of the message prints ok except the siganuate font didnt read nor print in English
5. I am using HP 2600n

Similar Messages

Assigned the output type with AR also,It is printing in ENGLISH Only.

Hi,
I have written a Z Smartforms and Z print program.
I have used ZRV56TD00(Copied from standard program RV56TD00),Inside it I have submitted the program(Z print Program) for the shipment number for the transaction code VT03N.
It is now printing the form in english well and good.
Now I want the same to work for the ARABIC.
I had done the arabic translation in SE63 and If I run the program It is printing only in English.
When the assigned the output type with AR also,It is printing in ENGLISH Only.
Suitable answers will be rewarded.
Regards
Manohar S
Edited by: Manoj on Jun 17, 2008 4:13 PM
Edited by: Manoj on Jun 17, 2008 4:14 PM
Edited by: Manoj on Jun 17, 2008 4:15 PM

Hi Manoj,
Goto transaction NACE and check wether you have mentioned the language in Mail title and texts for the particular message type.
let me know if you require in more detail.
Regards,
Sharath

Some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

Mail wont open in Leopard

Have upgraded to Leopard also installed XP Pro in NTFS format, I use Leopard for all day to day stuff and XP Pro infrequently. When I try and launch MAIL the following message appears on screen MAIL WONT LAUNCH. During the set up of XP Pro I went on line and validated. I was wondering if this has blocked my mail. Safari is working fine and all other network links around the office are fine.
Thanks

Sounds like you've co-minglied an old install?
Check your MAIL app version...should be 4.2. If not and you can't find it, do a custom install from the SL DVD and choose to install related applications only.
If still no joy, try this - find the /Library/Preferences folder in your user/Home folder and then locate and delete this file:
com.apple.mail.plist
*Caution* - doing this may clear your account settings so be sure to note those first in the event you are required to reconfigure, etc.

Mail wont open with software update

Ever since I updated my software my mail wont open and it says it cant run with the latest version... any ideas?

I have the same problem. Yahoo keeps asking for a password and will not accept it on my new iPhone 5. Yahoo mail is running fine on all other devices.

Black Ink wont print on HP Photosmart Plus B210a Product CN216A

My black ink wont print on the printer stated above. I have changed it twice in the past 3 days, still wont work. I then ran a print quality report, cleaned printheads, aligned cartridges, ran all the tests. Nothing will work. The color ink will print, but nothing black will. On the print quality report, the black ink wont show. The printer displays the black ink, so installation of the cartridge must have been correct. Is the black ink cartridge or slot broken. I'm not a tech savvy person so I dont know the term for that thing. Please help, and let me know if I should just get a new printer. Thanks

Since you have automatically cleaned the printhead, and aligned the cartridges I would try a manual cleaning of the printhead to make sure that ink buildup is not the issue. Solution three on this document shows how to remove and clean the printhead manually. I know that this document is not titled with your ink issue, but it is the best at outlining the steps needed to do that cleaning on the printhead. Open that first drop down menu option titled “0xc1900013 or no code displays with the Ink System Failure error message” and follow those steps listed under solution three. While you have that printhead out and are cleaning the contacts, take note of the warranty ends date listed there. If there is still an issue, write back and let me and provide that date off the printhead too.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

My mothers mac the safari dosent work right the mail the mail wont open up certain emails saying the plugin is blocked etc

my mothers mac the safari dosent work right the mail the mail wont open up certain emails saying the plugin is blocked etc

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Open Console in Utilities & see if there are any clues or repeating messages when trying to open Mail or Safari.

HT4623 yahoo mail wont open with i0s6

YAHOO MAIL WONT OPEN WITH NEW IOS6 ..

I have the same problem. Yahoo keeps asking for a password and will not accept it on my new iPhone 5. Yahoo mail is running fine on all other devices.

Please help me, mail wont send!!! Please help me!!!!

Please help me, mail wont send!!! Please help me!!!!
I have not changed anything but today cant send mail!
Any help would be most appreciated.

Try deleting and recreating the account on the iPad.

HT1338 mail wont work since update

My mac did an update for iphoto and since then my mail wont open
it says that this version of mail wont work with this system and to use the mail icon located in applications
tried that and it still wont work
HELP!!!!

I was having very similar issues with both the iPhone 3GS, which I returned, and then when I updated my original iPhone to the 3.0 OS. It turns out that the problem (at least in mine and others case) is an unassigned dummy email account on the iPhone. On the settings icon open up mail, contacts, calender and look at the end of your list of e-mail accounts. The dummy account will have the word e-mail in the margin but the rest of the field is blank. Select this for the account information go to the end of the information field and delete it.
When I did this it completely resolved my battery life issue and the over heating in my original iPhone. The cause it is suggested is because of the dummy account, the iPhone goes into perpetual search mode because of all the missing information. I wish I had know this before returning the 3GS.
Hope it works for you and you can begin enjoying all the benefits of the new 3.0

ABAP list report wont print on Z device type with Z format

Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

No comments

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps!

E mail bt print very small and i cannot change it. how can I get my e mails to print readable size

HOW CAN I GET MY E MAILS TO PRINT TO READABLE SIZE. BT YAHOO WINDOWS 7 HOME PREMIUM HP DESKJET F2480
NO FONT AVAILABLE TO CHANGE SIZE TO PRINT TO READABLE SIZE EG FONT SIZE 12 OR 14. DISPLAYS ON ABOUT SIZE 8
ALSO HAVE TO CLICK FULL VIEW TO READ. THIS HAS SUDDENLY APPEARED, DID NOT HAVE FULL VIEW ETC BEFORE .

Go to the following address: https://account.services.mozilla.com/
If you DO NOT remember your password, press the "Forgot your password?" link and it will be sent to the e-mail address that you used for registration.
Enter your e-mail address and your password. Follow any additional prompts. '''This should remove your account and all Sync data associated with your account from the servers.'''
Then, set up a new account.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

HP 1300 wont print from Remote Desktop applications

I have an HP 1300n attached via USB to a windows 7 computer. I log onto a clien'ts windows 2003 server using remote desktop application. I have installed the driver to HP 1300 PCL 5 on the remote server and of course it's installed on the windows 7 machine. I can see the HP via port TSXxx on the remote server but when printing, nothing happens. The document is sent to the "printer" but doesnt print in my office. I've tried many solutions and nothing so far works. I have 3 other windows 7 computers and 3 others HP 1300 and all are experiencing the same thing.

Hi Sriram,
I am glad to see that you have found solution from the other thread you posted here:
HP LJ1006 wont print on RDP 2012
https://social.technet.microsoft.com/Forums/en-US/ba350537-5ddf-4c0d-bb4c-8e7eb168c1a6/hp-lj1006-wont-print-on-rdp-2012?forum=winserverprint
Therefore, I will change this thread into discussion.
Please feel free to let us know if there are any further requirements.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Hp laserjet pro p1606dm with yosemite with usb wont print but printed on a network

hp laserjet pro p1606dm with Mac Yosemite using a USB wont print. Printed however when used on a network. Downloaded a driver again, though driver already installed. Driver was a dmg file and wouldn't open. Forum told me to use Safari to open a dmg file but that didn't work. Help! Want to use the printer at home that I was using at the office.

Hi @soneighbor ,
I understand that you are having issues printing from a USB connection, but you were able to print by a Wired Network connection. I will certainly do my best to help you.
The drivers for 10.8 are installed by the Apple Updates.
Once the printer is connected by a USB cable directly to the Mac, you should be able to just run the Apple Updates to install the drivers automatically. Installing a Mac Printer Driver Using Apple Software Update.
Delete any of the older drivers first.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet P1606dn)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Try printing again.
If you run into any issue, please do the following:
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
Try printing again.
If you are still having any issues, download and install the HP Printer Drivers v3.0 for OS X.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Mail wont print in English

Similar Messages

Maybe you are looking for