Mails Lost Exchange 2007

Hi,
I've some problems with the exchange server 2007. We are losing some mails and it looks like they getting lost between the Edge and the Hub role. All roles are installed on one physical device (no vms). I searched the one of the lost mails with the trouble
shooting tool and found it after that i check the details with get-messagetrackinglog -internalmessageid "XXXX".
The result was that this "lost message" has just one entry with the eventID RECEIVE. Then I checked an email for the same sender which arrived the mailbox. This mail has two entries, one with eventID RECEIVE and another with the eventID DELIVER.
My question is how can I find and resend this lost emails. They can not be in the queue anymore bnecause they are deleted after the categorizer categorizes them.
Is there a shell command to resend them?
Where can I find the e-mails, are tehy still cached on the system?
Thanks for your Help
BR
MessageTrackingLog one Good and one BAd (from same Sender outside our oraginization)
BAD:
Timestamp               : 2011-07-19 10:21:30
ClientIp                : XXX.XXX.XXX.XXX
ClientHostname          :
ServerIp                : YYY.YYY.YYY.YYY
ServerHostname          : MX01
SourceContext           : 08CE0319BEFF6A57;2011-07-19T08:21:26.747Z;0
ConnectorId             : MX01\Default MX01
Source                  : SMTP
EventId                 : RECEIVE
InternalMessageId       : 30960401
MessageId               : <[email protected]>
Recipients              :
{[email protected]}
RecipientStatus         : {}
TotalBytes              : 3639154
RecipientCount          : 1
RelatedRecipientAddress :
Reference               :
MessageSubject          : Lost Mail
Sender                  :
[email protected]
ReturnPath              :
[email protected]
MessageInfo             : 00A:
good:
Timestamp               : 2011-07-20 12:18:06
ClientIp                : XXX.XXX.XXX.XXX
ClientHostname          :
ServerIp                : YYY.YYY.YYY.YYY
ServerHostname          : MX01
SourceContext           : 08CE0319BEFFA713;2011-07-20T10:18:00.120Z;0
ConnectorId             : MX01\Default MX01
Source                  : SMTP
EventId                 : RECEIVE
InternalMessageId       : 32070502
MessageId               : <[email protected]>
Recipients              :
{[email protected]}
RecipientStatus         : {}
TotalBytes              : 7731
RecipientCount          : 1
RelatedRecipientAddress :
Reference               :
MessageSubject          : Mail
Sender                  :
[email protected]
ReturnPath              :
[email protected]
MessageInfo             : 00A:
Timestamp               : 2011-07-20 12:18:06
ClientIp                :
ClientHostname          : MX01
ServerIp                :
ServerHostname          : MX01
SourceContext           :
ConnectorId             :
Source                  : STOREDRIVER
EventId                 : DELIVER
InternalMessageId       : 32070502
MessageId               : <[email protected]>
Recipients              :
{[email protected]}
RecipientStatus         : {}
TotalBytes              : 7926
RecipientCount          : 1
RelatedRecipientAddress :
Reference               :
MessageSubject          : Mail
Sender                  :
[email protected]
ReturnPath              :
[email protected]
MessageInfo             : 2011-07-20 12:18:00

Hi,
as you can see in my earlier post I checked two messages of the same sender, one good and one bad message.
Both were received from the system and one was acctually delivered.
I just called the one mail "Badmail" because it didn't went trough to the mailbox but it was recived and it still think it got lost on the way from teh queue to the mbx.
Trackinglog Bad mail (check out the full log in my first post)
>Timestamp : 2011-07-19 10:21:30
>ClientIp : XXX.XXX.XXX.XXX
>ClientHostname :
>ServerIp : YYY.YYY.YYY.YYY
>ServerHostname : MX01
>SourceContext : 08CE0319BEFF6A57;2011-07-19T08:21:26.747Z;0
>ConnectorId : MX01\Default MX01
>Source : SMTP
>EventId : RECEIVE (received by edge and filled into the queue)
>and the failure is somewhere between edge and hub.
>The mail comes in ->edge puts it into the queue->categorizier checks it (smtp adr..) ->transferstarts + queue entry is removed
Here is the Agentlog and as I've written the logs look fine.
Timestamp       : 2011-07-19 10:21:29
SessionId       : 08CE0319BEFF6A57
IPAddress       : XXX.XXX.XXX.XXX
MessageId       : <[email protected]>
P1FromAddress   : [email protected]
P2FromAddresses : {[email protected]}
Recipients      :
{[email protected]}
Agent           : Content Filter Agent
Event           : OnEndOfData
Action          : AcceptMessage
SmtpResponse    :
Reason          : SCL
ReasonData      : 0
Diagnostics     :
Any solutions?
BR
..next time we eat bacon

Similar Messages

  • Mail and Exchange 2007 Assertion Failure

    I have been using Mail with Exchange 2007 on SL since it came out without issue, until last week. Once I start Mail I experience the following issues:
    1. Mail folders sometimes show as empty. Occasionally synchronizing the account corrects the issue, but often I need to restart Mail.
    2. Messages are duplicated in my Inbox. The only way to correct this is to delete and readd my account.
    3. Sent mail creates a draft message after the message has been sent. This usually goes away in 5-10 minutes of normal use.
    4. I get the following error message around 5 times per second in the system log while Mail is open and connected to Exchange:
    Mail[718]: * Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSConnection.m:374\nRe ceived an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 UserInfo=0x118be9740 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)", response: (null)\n(\n 0 Message 0x00007fff86b70119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137\n 1 Message 0x00007fff86b7007e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220\n 2 Message 0x00007fff86ab2fbe -[EWSConnection sendMessage:forRequest:] + 1117\n 3 Message 0x00007fff86abe0ec -[EWSGateway sendMessage:forRequest:] + 79\n 4 Message 0x00007fff86ad0fbf -[EWSRequestOperation executeOperation] + 104\n 5 Message 0x00007fff86b7e347 -[MonitoredOperation main] + 229\n 6 Foundation 0x00007fff8270f06d -[__NSOperationInternal start] + 681\n 7 Foundation 0x00007fff8270ed23 ___startOperations_block_invoke2 + 99\n 8 libSystem.B.dylib 0x00007fff84e0fce8 dispatch_call_block_andrelease + 15\n 9 libSystem.B.dylib 0x00007fff84dee279 dispatch_workerthread2 + 231\n 10 libSystem.B.dylib 0x00007fff84dedbb8 pthreadwqthread + 353\n 11 libSystem.B.dylib 0x00007fff84deda55 start_wqthread + 13\n)
    I have only seen one person report this issue so far and the fix was to remove /Library/Preferences/com.apple.mail.plist. I tried that, but the issue was not resolved.
    I am running Mail 4.2 on Snow Leopard 10.6.2 on a MBP 15" unibody. Any help is appreciated.

    I too have been using Mail.app x Exchange 2007 since SL came out without issue. Very similar issues started exhibiting themselves last week for me, as well:
    1. Mail folders sometimes show as empty (including the inbox). A restart of Mail fixes this.
    2. New messages occasionally only show headers. A restart of Mail fixes this.
    3. Mail will occasionally hang forever retrieving new messages.
    4. Sending a message will occasionally return a failure message, when it was, in fact, delivered. If I choose to "Send Later", a duplicate message is immediately sent.
    #1-3 are annoyances, #4's caused me to switch away from Mail.app--comes across as incredibly unprofessional to my user base and associates.
    Here's just one of the hundreds of messages that appears in Console (these literally pop up every 2-5 seconds I have Mail.app open..):
    3/11/10 3:25:05 PM Mail[30150] * Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSConnection.m:374
    Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 UserInfo=0x143a245c0 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)", response: (null)
    0 Message 0x00007fff828eb119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff828eb07e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Message 0x00007fff8282dfbe -[EWSConnection sendMessage:forRequest:] + 1117
    3 Message 0x00007fff828390ec -[EWSGateway sendMessage:forRequest:] + 79
    4 Message 0x00007fff8284bfbf -[EWSRequestOperation executeOperation] + 104
    5 Message 0x00007fff828f9347 -[MonitoredOperation main] + 229
    6 Foundation 0x00007fff878ab06d -[__NSOperationInternal start] + 681
    7 Foundation 0x00007fff878aad23 ___startOperations_block_invoke2 + 99
    8 libSystem.B.dylib 0x00007fff87dabce8 dispatch_call_block_andrelease + 15
    9 libSystem.B.dylib 0x00007fff87d8a279 dispatch_workerthread2 + 231
    10 libSystem.B.dylib 0x00007fff87d89bb8 pthreadwqthread + 353
    11 libSystem.B.dylib 0x00007fff87d89a55 start_wqthread + 13
    I'll try deleting and reinstalling the Developer Tools as hinted at in the above post, but I'm not so sure it'll make a difference for me, as my Mac Pro was immediately loaded with SL.

  • Mail (Lion) & Exchange 2007, periodically stops receiving messages, does no hang

    As the title says, we are having this issue.  I saw another post last year about Exchange 2010 hanging, and an old certificate caused the issue.  Our network admin is looking into that. 
    We are not experiencing any hangs.  Mail "works" fine.  We have multiple accounts setup (all Exchange) and 2 of the 3 are sending and receiving fine.  The last mailbox, the actual use account, will stop receiving.  There are no errors or indicators.  Typically someone will call and ask why she isn't responding.  She closes Mail and reopens and the emails come in.  Sometimes it's once a day, sometimes more.  I've removed the Exchange account and added it back in and it helped, but didn't resolve the issue.
    Any thoughts?

    After having the same error ("opening mailbox - Requesting latest information" - hang) and fighting for months on my Mac (Lion) to solve it, including writing angry bug reports to Apple - I think I finally found the source of the problem:
    There was an old (invalid) certificate installed in Exchange (2007, in my case), enabled for SMTP.
    Nobody seems to care about this - including Snow Leopard Mail, Outlook and all iOS devices - but Lion Mail cared, and just stuck. Typically after some time - maybe sleep/wake or just a couple of hours - Mail was stuck and did not receive any new mails anymore, until I Force Quit it.
    I got the hint from another forum (somebody suggested changing the properties in the locally installed certificates in Lion - but this was not the solution) and after seeing the question popping up once in Mail Preferences (do you want to trust this (old) certificate).
    After removing the old certificate from Exchange (good luck with this admin user interface - no wonder we did not notice it) - everything works ok for me, already a day without any hangs.
    Hope it helps! (Let us know the outcome...)

  • Mail and Exchange 2007 won't allow customizable "From" Header

    I use Mac Mail with an Exchange 2007 server. In Preferences > Accounts, under "Account Information," I have two different e-mail addresses (e.g., the address for that exchange server and a gmail address) listed in the "Email address" field. When I create a new message, there is a pull-down menu next to "From:" that is supposed to allow me to choose which of those two e-mail addresses should appear in that field.
    However, regardless of which e-mail address I choose, the e-mail message always has the "From:" address for the exchange server. In other words, it won't allow me to customize the "From:" field. This worked properly in the past and I've been using it for awhile, but it quit working when I re-installed Mail. Everything else works perfectly.
    Anyone else experiencing this? Any recommendations?
    Thanks!

    Thanks for your message.
    Actually, changing "Reply-To" isn't what I need. I need the proper e-mail address to show in the "from" field; for example, because I need to send messages to a server and those messages need to come from a specific e-mail address.
    And, the pull-down message is definitely next to the "From" field whenever a new message is generated.
    I actually don't receive messages in Mail for the other two accounts (e.g., I use Gmail's web interface for Gmail messages). I'm simply needing to modify the "From:" field in OUTGOING messages, something that used to work but quit working recently.

  • Mail w/Exchange 2007 Account- Reply arrow appears, but reply not found

    Hello out there,
    I'm really hoping someone can help with this. I have a problem, and it affects all three of the Macs I regularly use: an iMac at home, a MacBook on the road, and and iMac at the office. I have three mail accounts configured identically on all these Macs: Gmail, MobileMe, and an Exchange 2007 account, which uses the Web Services Edition. In short, everything is completely up to date all the way round. Oh, and I also use an iPhone which accesses my Exchange account for mail as well.
    My problem is this: I reply to a message in either the MobileMe or the Gmail account and presto, the reply arrow appears and clicking on it instantly reveals my reply. Works as advertised. In the Exchange account, the arrow also appears, and shows up on whichever Mac I happen to be using. However, clicking on the arrow I get a message that says something like "reply not found, you may have deleted it." Which, of course, I haven't. If I search the Exchange account's sent mail folder I find it easily, so I know it's there.
    I've tried all kinds of stuff, deleting the plist file, completely removing and reinstalling the Exchange account, rebuilding folders, all to no avail.
    Anyone have any ideas? I would really like to resolve this and find it a major flaw, at least as it appears, in Apple's implementation of Exchange server support.
    Thanks in advance!

    I have 10.6.3 running on my iMac and the problem still exists - all reply and forward status arrows are basically inert; clicking on they does not show my my reply or forward. I don't believe that there is any preference that affects this behavior so it can only be some kind of bug.

  • Mail.app exchange 2007 Assertion failure in EWSConnect sendMessage:forReque

    Snow leopard hasn't worked properly with our exchange server for months, I was hoping this would be sorted in 10.6.3 but it seems not.
    Incoming mail is fine, sending text emails or sendmail with attachments such as PDFs is also ok. The problem is when sending / forwarding any HTML mails, or by sending an email with an embedded image.
    Upon doing this the mail sits in the outbox and gives the following error to the console
    06/04/2010 18:54:52 *Mail[405] * Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSConnection.m:293*
    Received an unexpected error: Error Domain=SOAPWebServicesErrorDomain Code=-1 UserInfo=0x115b78510 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1.)", response: (null)
    0 Message 0x00007fff864f8119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff864f807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Message 0x00007fff8643afbe -[EWSConnection sendMessage:forRequest:] + 1117
    3 Message 0x00007fff864460ec -[EWSGateway sendMessage:forRequest:] + 79
    4 Message 0x00007fff86458fbf -[EWSRequestOperation executeOperation] + 104
    5 Message 0x00007fff86506347 -[MonitoredOperation main] + 229
    6 Foundation 0x00007fff84f0206d -[__NSOperationInternal start] + 681
    7 Foundation 0x00007fff84f01d23 ___startOperations_block_invoke2 + 99
    8 libSystem.B.dylib 0x00007fff861b1ce8 dispatch_call_block_andrelease + 15
    9 libSystem.B.dylib 0x00007fff86190279 dispatch_workerthread2 + 231
    10 libSystem.B.dylib 0x00007fff8618fbb8 pthreadwqthread + 353
    11 libSystem.B.dylib 0x00007fff8618fa55 start_wqthread + 13
    06/04/2010 18:54:56 Mail[405] * Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSConnection.m:293
    Received an unexpected error: Error Domain=SOAPWebServicesErrorDomain Code=-1 UserInfo=0x11ca12780 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1.)", response: (null)
    0 Message 0x00007fff864f8119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff864f807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Message 0x00007fff8643afbe -[EWSConnection sendMessage:forRequest:] + 1117
    3 Message 0x00007fff864460ec -[EWSGateway sendMessage:forRequest:] + 79
    4 Message 0x00007fff86458fbf -[EWSRequestOperation executeOperation] + 104
    5 Message 0x00007fff86506347 -[MonitoredOperation main] + 229
    6 Foundation 0x00007fff84f0206d -[__NSOperationInternal start] + 681
    7 Foundation 0x00007fff84f01d23 ___startOperations_block_invoke2 + 99
    8 libSystem.B.dylib 0x00007fff861b1ce8 dispatch_call_block_andrelease + 15
    9 libSystem.B.dylib 0x00007fff86190279 dispatch_workerthread2 + 231
    10 libSystem.B.dylib 0x00007fff8618fbb8 pthreadwqthread + 353
    11 libSystem.B.dylib 0x00007fff8618fa55 start_wqthread + 13
    One fix is to switch the outbound SMTP manually to be the exchange hostname or say a home ISP but this is a hack considering sending mail clearly works purely over SSL and web services, it's just certain attachments that are failing. It's also a pain for travelling users with laptops who won't always have access to SMTP due to blocked ports etc.
    Similar issues but no fixes
    http://discussions.apple.com/thread.jspa?threadID=2268944&tstart=0
    Trashing mail.app and the .plist makes no difference which does seem to fix it for some people (still a hack again though)
    This is also not related to the issues of sending attachments of 10meg+, for e.g.
    http://discussions.apple.com/message.jspa?messageID=11138832
    As attaching a 100kb image creates the above error, clearly not an exchange 2007 problem.
    Exchange 2007 is completely upto date with SP2 and all updates, various outlook clients connect fine as does entourage 2004/2008

    Snow leopard hasn't worked properly with our exchange server for months, I was hoping this would be sorted in 10.6.3 but it seems not.
    Incoming mail is fine, sending text emails or sendmail with attachments such as PDFs is also ok. The problem is when sending / forwarding any HTML mails, or by sending an email with an embedded image.
    Upon doing this the mail sits in the outbox and gives the following error to the console
    06/04/2010 18:54:52 *Mail[405] * Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSConnection.m:293*
    Received an unexpected error: Error Domain=SOAPWebServicesErrorDomain Code=-1 UserInfo=0x115b78510 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1.)", response: (null)
    0 Message 0x00007fff864f8119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff864f807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Message 0x00007fff8643afbe -[EWSConnection sendMessage:forRequest:] + 1117
    3 Message 0x00007fff864460ec -[EWSGateway sendMessage:forRequest:] + 79
    4 Message 0x00007fff86458fbf -[EWSRequestOperation executeOperation] + 104
    5 Message 0x00007fff86506347 -[MonitoredOperation main] + 229
    6 Foundation 0x00007fff84f0206d -[__NSOperationInternal start] + 681
    7 Foundation 0x00007fff84f01d23 ___startOperations_block_invoke2 + 99
    8 libSystem.B.dylib 0x00007fff861b1ce8 dispatch_call_block_andrelease + 15
    9 libSystem.B.dylib 0x00007fff86190279 dispatch_workerthread2 + 231
    10 libSystem.B.dylib 0x00007fff8618fbb8 pthreadwqthread + 353
    11 libSystem.B.dylib 0x00007fff8618fa55 start_wqthread + 13
    06/04/2010 18:54:56 Mail[405] * Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSConnection.m:293
    Received an unexpected error: Error Domain=SOAPWebServicesErrorDomain Code=-1 UserInfo=0x11ca12780 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1.)", response: (null)
    0 Message 0x00007fff864f8119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
    1 Message 0x00007fff864f807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
    2 Message 0x00007fff8643afbe -[EWSConnection sendMessage:forRequest:] + 1117
    3 Message 0x00007fff864460ec -[EWSGateway sendMessage:forRequest:] + 79
    4 Message 0x00007fff86458fbf -[EWSRequestOperation executeOperation] + 104
    5 Message 0x00007fff86506347 -[MonitoredOperation main] + 229
    6 Foundation 0x00007fff84f0206d -[__NSOperationInternal start] + 681
    7 Foundation 0x00007fff84f01d23 ___startOperations_block_invoke2 + 99
    8 libSystem.B.dylib 0x00007fff861b1ce8 dispatch_call_block_andrelease + 15
    9 libSystem.B.dylib 0x00007fff86190279 dispatch_workerthread2 + 231
    10 libSystem.B.dylib 0x00007fff8618fbb8 pthreadwqthread + 353
    11 libSystem.B.dylib 0x00007fff8618fa55 start_wqthread + 13
    One fix is to switch the outbound SMTP manually to be the exchange hostname or say a home ISP but this is a hack considering sending mail clearly works purely over SSL and web services, it's just certain attachments that are failing. It's also a pain for travelling users with laptops who won't always have access to SMTP due to blocked ports etc.
    Similar issues but no fixes
    http://discussions.apple.com/thread.jspa?threadID=2268944&tstart=0
    Trashing mail.app and the .plist makes no difference which does seem to fix it for some people (still a hack again though)
    This is also not related to the issues of sending attachments of 10meg+, for e.g.
    http://discussions.apple.com/message.jspa?messageID=11138832
    As attaching a 100kb image creates the above error, clearly not an exchange 2007 problem.
    Exchange 2007 is completely upto date with SP2 and all updates, various outlook clients connect fine as does entourage 2004/2008

  • Virtual Mail Server (Exchange 2007)

    G'day,
    I have 10.5.4 server running on a 1.66GHz Core Duo MacMini. I'm desperate to have a push mail server running and I'm about to go ahead with this design. Just wanted to see what you guys thought about it first.
    10.5.4 server as the primary system
    VMWare Fusion emulating 2003 Enterprise Server R2 with 2003 Exchange Server SP1
    Could have all the files locally based on the server and the beauty of virtual environment is that I can simply reboot to previously saved settings if anything is to go pair shaped.
    Let me know what you think.

    Actually I was thinking of doing the same thing, but with my PowerMac G5 Dual 1.8Ghz, 2GB Ram, 34GB Raptor 10K boot volume, and 150G Data store.
    Does Apple's Leo Server have push cal/mail/contacts? I desperately need a simple setup as well for our office, and currently run a test Server 2008 environment running Exchange 2007, but its overly bloated and so many configuration options.
    Thanks!

  • Mail displaying Exchange 2007 tasks

    I have tasks in my Exchange 2007 Tasks folder. iCal sees them and displays them in its "Tasks" calendar, but Mail does not seem to display any in its "To Do" folder. Is this intentional?
    I also cannot create a new To Do in the Exchange account. My "To Do" button is disabled, and the tooltip displays this message: http://gallery.me.com/link.dupont/100100/MailToDoToolTip
    Message was edited by: Link Dupont

    I had the same problem.... but then I restarted Mail Mac and the To Do went back online..... but now I have a different problem..... I create a To Do.... and it will display that there´s 1 To do item... but then I restart Mail Mac and it will show me that I have 2 To do item...... like it get´s duplicated but only one is shown.... any ideas???.. same problem anyone???.... also I cannot create events on iCal.... anoying..

  • Sync selected Mail accounts - Exchange 2007

    I am trying to determine the limitations of syncing Mail accounts through iTunes to an iPod Touch.
    I am using the latest version of Snow Leopard, iTunes and iOS. The iPod Touch is a 2nd generation 8GB model.
    I have a GMail IMAP and an Outlook Live Exchange 2007 account in Mail. In iTunes it only indicates the IMAP account. Is this because iTunes cannot sync Exchane accounts. I can setup the Exchange account on Mail and the iPod Touch seperately but, I would prefer to have it synced to make it tidier.
    Is this possible?
    Thank you in advance.

    Is this possible?
    No. Your exchange account syncs over the air.

  • Mail with Exchange 2007 - Rules for "Mark as Read" and "Move to Folder"

    I have seen this posted before, but never any resolution. This is very frustrating to me.
    I have an Exchange account set up in the the latest version of Mail.app (4.4.1082) for OS X 10.6.6. I have rules set up for this account that tell Mail.app to mark the message as read after moving the message to a specific folder if it meets the provided criteria. The rule does move the message to the proper folder, but it does not mark the message as read. This only seems to affect Exchange accounts.
    Has anybody experiencing this found a resolution? I have tried separating the rules or putting them in a different order (and mail just reorders them the way it wants which is frustrating to me as well). Seems no matter how I do it the mail either gets marked and not moved or moved and not marked.

    Anyone have any thoughts?

  • Cannot send mail from Exchange 2013 to Exchange 2007

    I have an
    Exchange 2007server with all roles in the same server (Version:
    08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
    (full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
    I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
    few articles on the Internet.
    Any suggestions?

    These two sentences are in conflict : "I can also send
    internal mail
    from Exchange
    2007 to
    Exchange 2013. But
    the problem is
    that I am unable
    to send from Exchange
    2007 to
    Exchange 2013. "
    Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

  • How to upgrade Exchange 2007 from Sp1 to SP3 RU13

    Hi everyone, I have a mail system Exchange 2007 SP1 CAS and HUB with 3 servers. 
    The mailboxes are on a Windows Server 2008 Failover Cluster. 
    Domain controllers are Windows Server 2003 SP2 
    I have to update the mail system with Service Pack 3 and RU13. 
    Does anyone can tell me the procedure? where I have to start by the CAS / HUB or cluster mailboxes? 
    How do I update the cluster of mailboxes, the resources on the active node and update it, or liability? 
    There's something I have to take intoaccount before upgrading? 
    I can upgrade directly to SP3? or I have to upgrade before SP2?  thank you very much
    Microsoft Certified IT Professional Server Administrator

    http://technet.microsoft.com/en-us/library/bb885043(v=exchg.80).aspx
    Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers
    and
    http://technet.microsoft.com/en-us/library/ee221147(v=exchg.80).aspx
    How to Install the Latest Service Pack or Update Rollup for Exchange 2007
    and, yes, you can go straight to SP3
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Inconsistencies connecting to Exchange 2007

    Greetings:
    We have just migrated a high-demand client to Exchange 2007, and are using a combination of Apple Mail and Entourage for a few different users.
    Users are reporting messages coming into their Blackberries and Entourage almost immediately after sending.
    Yet in Apple Mail, we are seeing issues where some of the mail is not being received by Mail for sometimes up to 30 minutes later.
    We're trying to nail this down to see if it has to do with certain messages that use attachments. It has been difficult to reproduce, but we've had many complaints in the last 2 weeks since we made the switch.
    Additionally, when we were on Exchange 2003, two of the users liked using POP because of the sheer number of messages and attachments they received. On the new server, POP became impossible to use because Apple Mail would start downloading the same messages two, three, sometimes even four times, causing massive amounts of duplication.
    Attachments haven't been consistent in Mail. I will sometimes see messages via OWA that have the attachment, but Mail will not show the attachment. We are having users quit Mail and restart it, and sometimes this can correct the flow of messages, as well as attachments showing up or not.
    There is another issue that has been plaguing us: at least 2 or 3 times in the last couple of weeks, someone has deleted a message by accident. And when going into the Trash to find the message (Mailbox behaviors are set to store deleted items on server), the message has just disappeared. They've been able to pull it from the Blackberry in some cases, because Mail does not always resolve the deletion quickly.
    We wanted to know: what are the caveats of using Apple Mail with Exchange 2007? Does the newest rollup make all the difference? Are there issues that we should know about? The "slowness" issue is the biggest complaint we're getting on a regular basis.
    Internet connections vary, since the principles of the company are spread out between Hollywood, Palm Springs, and Tulsa - and the reports we're getting back are coming from all of those locations.

    The first thing to check is how often Mail is polling the server for new messages. Mail does not support Push messaging from Exchange, so you have to set the frequency of message checking appropriately. I have mine set to check every minute.
    I can't address the issue with attachments, though we have had similar problems with Outlook clients that have turned out to be problems with the user's Exchange profile (Blackberry systems use RIM's own mail servers, not the Exchange server, so you can't really compare experiences there). For deleted messages, there may be more than one folder in which deleted messages may be put, so it may be that your users just aren't looking in the correct folder; there may be the Mail Trash, but also a Deleted Items folder down in the list of folders.
    Hope this helps.

  • Exchange 2007 - Mac mail broken?

    Since yesterday I have not been able to receive email on Mac mail connecting to hosted Exchange 2007 from GoDaddy.
    I have deleted the account twice now, both times the mail synchronises up to current mail and then no new mail comes in.
    When I try to send mail I get :
    'Cannot send message using the server [email protected] (exchange). The exchange server 2007 connection to server ex1.secureserver.net failed '
    Funny thing is the mail does actually arrive with recipient but it remains in my mac mail outbox.
    Email is working fine using web/owa and fine on iPhone. This also works fine on my Windows 7 Machine using Outlook 2007 so it is no GoDaddy's issue.
    Did Apple break something in an update?

    I have just been able to verify that this is indeed a GoDaddy issue. I have two Exchange accounts, one hosted with GoDaddy and one on a corporate Exchange server.
    My GoDaddy hosted Exchange account is not working at all right now, after the issue started yesterday I deleted the account, rebooted and added it again and I now don't see ANY emails now in my Inbox or other folders on the Exchange server. I also lost all of my calendar and delegate calendar info in iCal (but it's all still on the server). OWA, iPhone, and Outlook on a virtual PC continue to work fine.
    My corporate Exchange account continues to work as expected in Mail. I just had a colleague send me several test emails and meeting requests, I was able to see the message contents (not just the header like I was seeing on the other account yesterday), reply, and accept the meeting request.
    I guess the fun part starts now - getting the dipsh**s at GoDaddy to figure out what they broke.

  • Establish mail flow from Exchange 2007 to Exchange 2013

    I am currently using Exchange 2007 into three sites in three cities and two of the sites are connected to Internet sending and receiving emails via Edge transport servers.
    Now I am planning to upgrade to exchange 2013 CU1. I don't find any documentation on how to establish mail flow between Exchange 2007 and Exchange 2013. Will it be automatic or do i need to create specific connectors between them?

    Was this question answered.  We're in the same situation now as we're upgrading to Exchange 2013 from 2007. The latest CU certainly helped.   Initially the test mailboxes on Exchange 2013 couldn't email each other - This was resolved with CU7 and
    using "Custom Settings" - manually entered IPs for DNS in the Exchange  Admin Center "DNS Lookups".
    Issue at the moment Test mailboxes on Exchange 2013 cannot email mailboxes on 2007 or visa-versa and mail from external sources queues on the 2007 box.  
    Any assistance will be greatly appreciated.  

Maybe you are looking for

  • AVCHD wont open with Quicktime player

    I'm using the sony handy cam. Plugged it into the computer and tried selecting all four options on the camcorder (USB connect... etc.) two of them came up with a file AVCHD. I clicked on it and it opened a new window that appeared to be loading, and

  • Creating sprite sheets with Photoshop CC

    Hi, I am creating a sprite image that is 200x 125px that has 8 images accross and 5 images down with each image on its own layer and each image is a max size of 25px x 25px.  How do I have Photoshop align the layers to have each image centered within

  • I cannot open Google in Firefox. Why not??? This is since I "refreshed" Firefox.

    Ever since I refreshed Firefox, I cannot open Google which means I cannot access my Gmail account. This is very aggravating. Kindly help me to fix this problem I have tried the usual restart solution and it didn't solve anything.

  • Hosting applications

    Hi there, I've got an idea for a 3 tier app which will involve an applet and a MySql db with a servlet in between to take care of the security issues around applet / DB communication. I dont currently have a website but I would like to purchase a dom

  • HT1222 Cannot empty Cache in latest Safari

    Thats it. In the last version of Safari I could after a sensitive transaction... now the option is gone. How can I do that ... empty cache Rudi