Mailto is launching email ok but also launching blank web page

i am using AS3 on a website. Part of the AS has been setup by an external source and I ma now updating and adapting it. My knowledge of AS is limited but slowly expanding.
Currently the site is a main flash file with all the content delivered via a main.as file and then populated via images and videos held in folders on the web.
In one section we have an email link.
I was using Email: <a href='mailto:[email protected]>[email protected]</a> and it worked fine. It launched the email program and put the email address in ready to go.
When I added the subject element as below
Email: <a href='mailto:[email protected]?subject=Email%20Enquiry'>[email protected]</a>
it now does what it should with the email program but it also opens a blank webpage.
What can I do to get rid of the blank web page opening?
thanks in advance

yep it was that errant fullstop
thanks for the replies

Similar Messages

  • WCS is initialized, but is not serving web pages.

    The WCS version 5.0 failed to start, I tried stop the services and then reload the server but the resut is same.
    The dadabase is running and Apache server is running but  WCS is initialized, but is not serving web pages.
    CISCO say this issue coul be for syncronization.

    Hi,
    Cisco says it could be synchornization with the database.
    The log file show:
    172.28.255.113 - - [14/Nov/2010:00:02:18 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:04:30 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:07:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:09:30 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:12:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:14:30 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:17:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:19:31 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:22:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:24:31 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:27:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:29:31 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:32:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:34:31 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.113 - - [14/Nov/2010:00:37:17 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 3368
    172.28.255.111 - - [14/Nov/2010:00:39:31 -0500] "GET /webacs/loginAction.do?requestUrl=/webacs/welcomeAction.do HTTP/1.1" 500 33
    Thanks for your help.

  • I am able to get on wi-fi, but, once on a web page, I am  un able to navigate anyplace on that page.

    I am able to get on wi-fi, but, once  on the web page, I am unable to navigate anywhere else from that page.

    if you connect to a public wifi you may need to put in a login and password to access their service
    that would be don on that web page

  • Why does my computer say its connected through wi-fi but wont open a web page, why does my computer say its connected through wi-fi but wont open a web page but will work if im hardwired into the internet

    my computer is showing full connection through the airport but wont open any web pages it says it is not connected to the internet... When i hard wire the internet in with the cord it works just fine so i think i somehow messed up or turned of my wi fi capability but i show my airport is on

    Your computer is showing it's connected to the Wifi router all right, but perhaps the router isn't connected to the Internet.
    If your connecting the Ethernet cable directly to the modem and resetting it, bypassing th erouter and then getting online, fine that's good.
    If your connecting to the router directly and getting on the Internet fine, it means the router is connected to the Internet.
    If the last one is true then likely what has occured is your DCHP lease is expired because your computer doesn't have the right time and date as the router, it's showing a good signal but your not connecting.
    Open System Preference and check the date and time and set it to update to Apple's time server for your location.
    Sometimes Apple's time is off, as third party routers get their time elsewhere and sometimes the two don't match and thus DCHP lease is expired.
    ..WiFi, Internet problems, possible solutions

  • Connected to "open wireless network" but can't open web pages

    Anyone ever to joined a "public" open network but failed to open web pages?
    Twice I have entered a hotspot (Texas Highway Dept. Rest Area & an Air Force base recreation hall) and received the "Do you want to join the open network ...." prompt but once joined with full signal strength, I can't open any web pages.
    Tried several variations of "Automatic" in Network prefs. I could join the network no problem and always got the green "connected to the internet via Airport" indicator. Same connection setup joins typical hotel and other hotspots no sweat.

    Hi Tim-
    If your Mac has been sleeping when you pull into the Texas Rest Area, and you hit the 'connect to open network'...
    You might want to try a full restart of the mac, and try again.
    If this has only happened twice to you (out of how many open networks that have been successful?)...then that's not a bad track record.
    DNS is likely the issue, as mentioned here. A cure-all can often be a 'restart the mac', which might make some mac users gasp...gives you a chance to pretend you're a PC

  • I started my ipad in wifi but didnt open the web page, what is the problem?

    i started my ipad in wifi but didnt open the web page, what is the problem?

    Your iPad is probably not connected to the Internet.

  • Firefox loads, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled no change. problem came after recent update. any help?

    firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
    ps. IE works as usual

    Problem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.

  • Can get email, but can't load web pages

    I have an Airport Extreme basestation which, up until a week ago, was working fine. Now, I can send and receive email, but I can't access any web pages. When I try, it just hangs and nothing loads. Nothing has changed in setup and I haven't changed any settings anywhere. My suspision is that my ISP (Charter) changed something that my Airport is unhappy about.
    I called Apple, and they told me it's Charter fault. I called Charter, and they told me it's Apple's fault.
    I also called my local Apple store (not an official Apple store, but a small local reseller) and they said they've had an unusual number of people in the area reporting the same problem. Unfortunately, they don't know what could have happened.
    Any idea what the problem might be or what I can check? Any help would be greatly appreciated.

    It sounds like it might be a DNS issue.
    In a browser try http://17.254.0.91
    and report back
    iFelix

  • Home hub connected but can't open web pages

    Hi
    Having a problem accessing any web pages. Has been like this for last 3 days. All the lights on the BT Home Hub are on and according to the task bar on my laptop it is connected and signal etc is all fine. When you open browser it tries to connect but never loads a page and eventually times out. Have phoned BT broadband help and they say there is nothing wrong with the line. Pretty certain it's not my laptop as my wife's has exactly the same problem and she uses a different browser and has different anti-virus software.
    Any suggestions?
    Thanks

    I have also had exactly the same problem!
    I've had the BT Broadband option 1 for at least 3 years now and not had any major problems (lucky me).  I decided to go for the new package (TV, Broadband (option 2), & calls package £18 per month - currently on offer) as I wanted to get Sky Sports through BTVision.  I'm not allowed Sky or cable TV where I live.  The activation date for Broadband option 2 was Monday 7th March and Monday 14th for BTVision.  This also included a new router i.e. HomeHub3.
    On Sunday the 6th March my internet connection was fine i.e. could open web pages, get email etc (using a BT Voyager Router).  On Monday 7th I went on line and was unable to open web pages.  I thought it might be a minor problem i.e. back up in an hour.
    On Tuesday the 8th March I still had the same problem (Voyger Router) but had also received my new router (BT Home Hub 3).  I decided to install the new hub thinking that would resolve the problem but it did not.  I then tried a wirless & cable (2 different cables) connection to my PC & XBox and still could get online even though I was "Connected".  I phoned the broadband help desk and was on the phone for at least an hour with no success.  The help desk agent said it could be a problem with my account and said he would ring me back on Wed at 8pm........guess what?  No phone call.  I then phoned up again (10pm) & went through all the usual tests.......again!  It still didn't work and I was told that it was probably a problem with my PC and they put me through to another department that should be able to help.  I was then asked what the problem was (no communication between department then!)  I had to go through the whole thing again and was then told that I would have to pay £10 a month (for at least 3 months) for them to do further checks.
    Wednesday & Thursday evening I phoned the Broadband help line (same tests again - no notes on my previous calls!) and still no success. I didn't pay for the £10 month service (BT Home help) out of principle and do not know what to do next.

  • Trying to redeem a £15 gift card sent by email, when i click redeem a web page is loaded telling me to download itunes which is already on my laptop

    Trying to redeem a £15 gift card sent by email, i click on redeen in the email and a web page is opened telling me to download itunes which already exists on the laptop. Unable to redeem the £15.

    What is the next step in the suggested redemption process in the email?
    What browser are you using?
    The link may be supposed to automatically open iTunes in the relevant page in the store but such links are not supported in all browsers or may require that you install a browser extension for them to work.
    tt2

  • Connected to an active network but unable to load web pages

    Hi,
    I am using an old Powerbook with OS 10.2.x and am trying to add it to an existing network at home. The network is a DSL/ADSL connection, which is received by a modem and is passed on to a wired/wireless router. I have a PC which connects successfully to the router either by wire or wireless and is able to load web pages.
    My Mac, however, does not. It indicates that it is connected to my wireless network, and shows full signal strength. It is assigned an appropriate IP address by the router. However, I cannot load any webpages. All I get is a 'server not found'. This is vexing me, and I have been at it for hours, but no solution.
    Let me add that with the same settings, I was able to browse on my Mac also yesterday, but for some reason, I have no luck today. Can someone please indicate what is going on?

    I am having the exact same problems. My laptop (Gateway) connects fine to the router, but my Mac does not. They sit right next to each other upstairs. The signal will SOMETIMES come through to my Airport card and when it does it is at full strength, but when i run Safari, nothing. I have tried to enter all the information that my PC has printed out and displayed for me, but i have no clue what half of the things are. and my applecare has expired so the people at Apple will not help which is extremely annoying. Sorry i can't help. But if i find anything i will let you know.

  • Applet works fine with JNLP... but not on my web page

    I can create a seperate JNLP for my applet, and it works fine. However, when I try to insert it into a web page, it does not work. I was wondering if this was a common newbie issue, and how I would go about fixing it. I compiled it using the newest J2EE JDK and the newest JSE (downloaded and installed a couple of weeks ago).
    Any help would be greatly appreciated... thank you.

    If you want to insert an applet in a web page you use java plug-in, not java web start. You can use Java Web Start to deploy an applet outside of a browser, but plug-in is still the primary applet deployment method, and the only one that can show an applet in a web page.
    /Andy

  • Email code do not appear in web page

    I want to send email so I put the following test code in an index.cfm file:
    <cfmail to="[email protected]" from="[email protected]" subject="Hello There">Hello!
    Testing</cfmail>
    <p>cfmail</p>
    When I view the page source of the web page, I only see "<p>cfmail</p>".
    I do not see "<cfmail to=... </cfmail>.
    Please help.
    Thanks.

    Have you checked the underliverable mail directory and/or log files to see if any errors were encountered?
    You may wish to review the "Sending and Receiving E-Mail" section of the CF documentation for information on troubleshooting mail problems.
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -782a.html

  • Internet connected but unable to load web pages

    Hi - My computer is an Imac, late 2006 model. For some reason I seem to be having problems connecting to the internet using the Airport connection. Using the Ethernet cable everything is fine no problems whatsoever, but wireless connection just doesn't happen. I have run through all the relevant diagnostics and checked the wireless router modem settings. My wife recently bought a MacBook - it connects wirelessly without a hitch. I even changed the iMac setting to exactly the same as the MacBook, but still nothing. I get the green lights in the Network Diagnostics screen, but when I try to load a page in Safari I just get an error message " Not connected to the Internet, or Server failed to respond".
    My broadband ISP is Virgin Media (not a cable connection - it's ADSL) and the wireless router modem is a Netgear DG834GSP v3.
    Any ideas anyone as am getting really frustrated at not being able to connect wirelessly.
    Thanks in advance.

    Hi I have been having exactly the same problem for the last couple of weeks, and can't explain what is happening either. The Mac seems to be connected to the Internet with all of the status 'lights' in Network diagnostics green. I am picking up an IP address but can't load any Web pages. Very puzzling !

  • .swf displaying in preview, but not on actual web page

    As above really. I don't really use Flash, but was just trying to put up a little video demo online.
    Just dragged the video onto the canvas, published it as an .swf, but when I upload it all and visit the web page, the video clip / swf isn't displaying.
    Its fine in the preview though.
    The page is here :
    http://www.hpwebdesign.co.uk/demo.html
    Any ideas what I'm doing wrong?
    Thanks.

    OK - I didn't think you needed to upload the original video clip.
    Anyway - I've recreated my steps.
    1. Opened Flash.
    2. Created a new ActionScript 3 page
    3. File > Import > Video with Load external video with playback component
    4. Save file
    5. Publish SWF
    6. Switch to DW and Insert > Media > SWF
    Before switching to DW, it all looks OK in the preview.
    How do I get Flash to create the HTML page? I had a quick look through the menus, but didn't see anything....

Maybe you are looking for