Maint. work center

Hi All,
In which report i could see the work done (Hrs) by the maint. work center in whole month?
regards
sunil

Dear,
U can get the total actual work done by that workcenter through IW47. In the transaction u can select Actual work, actual duration, actual start and actual finish etc...
U can get the total actual work done duration for the given period.
Regards
Srinivas

Similar Messages

Maint.Work Center -Length of Break Hours-Reg

Dear PM Guys,
I want to specify the exact timing of Break in Maint.Work Center.Eg
Start time-08.00.00
Finish time 17:00:00
Length of Break:01:30:00
My requirement is I want to specify the 11/2 hours break timing as
12:00:00-13:00:00(1 hr) and 15:00:00-15:30:00.
Where to specify this in work center.

Dear
Pls process the ur req as below
IR02--Cap. tab- Cap Header---
Here u can find shifts, breaks, cap profile, HR assignment.
But using this ensure that shift created at OP4A t codes before doing the above.
our friend is given I/p it will helps you , if its ok close the thread . unless log ur query
Thenna

More than one work center for one operation

Hi Experts,
Is it posssible to assign more than one work center to one operation,in a maintenance order?
for example if head fitter and helper has executed maint.activity,how we can do this
Thanks in advance
Regards
Prashil

Dear,
You cannot assign more then one workcenter to a one operation.
But you can assign to a sub operation,i.e to operation one workcenter and to suboperation anotherworkcenter.
For Sub-operation:
Go to task list change >>> Operation tab.
Let say your first operation number is 0010. Then below it for next operation change operation number to 0010 and next to it there is field for sub-operation give there number 0001 or 0010 as per your requirement. Select suitable control key and work center, give description and press enter. your sub operation 0001 will be created for operation 0010.
I hope it will solve your query,
Thanks,
Mohit

Work-center timings not reflecting in maintenance order.

Hi,
My requirement is, I want the work-center timings to reflect in my call object (Maintenance Order) generated through a maintenance plan.
My scenario is: I've made a work-center with the following data,
wrkcntr category as 0005; usage 004; control key PM06 with scheduling indicator checked;
in capacities start-finish timings as, 06:00-14:00; operating time of 8hrs, and factory calendar is chosen for maint. people.
The order type say pm08 is selected.
now in the maint. plan we choose this work center in the planning data field.
Task-list is also attached and the data are OK.
in maint. plan scheduling parameter shift factor etc NOT given.
Now when after schedulling I got one order with the
SchedStart: DD.MM.YYYY 06:00
Sched.Fin.: NEXT DATE 06:00
but I need the date to be 06:00 to 14:00 as in the respective work-center.
For for fastly solving the problem my analysis:
I checked the order,goto operation tab,goto dates tab and found that basic finish time of activity is 24:00:00
If this is the reason than how to make it 08:00:00 default for this order type.
Thanks in advance,

Hi Tyag,
the details are cmins as below
Erl. start: 19.09.2008 06:00:00      Earl. fin. 20.09.2008 06:00:01
LatestStart: 19.09.2008 06:00:00 LatestFin. 20.09.2008 06:00:01
Act. start:                    00:00:00 Act. finish                  00:00:00
                                                 FcstFinish                  00:00:00
Restriction
StartPoint
End                                                         24:00:00
I am new to this and need your help.
The req is how to reflect wrk center timing in the wrk order generated through a maintenance plan.
Regards,
sanjay
Edited by: ganesh sarasvati on Sep 23, 2008 11:47 AM

PP work center capacity and link in Equipment master

Dear All
My client has five equipments which he is clubing them into one work center with five capacities. In equipment master i have given for respective equipments i have given PP work center locations but when i create a maint order for one equip then in planning the capacity avalability is affecting the entire work center for ex if the total work on one equip is 12 hrs then only 8 hrs of capcity should be deducted for to day and 4 hrs for tommorow but in plannig all 12 hrs are getting deducted in todays capacity itself.
Pls give some inputs from your experiances
Thanks and Regards
Pankaj

Hi,
Even if we have more than One Equipments in the same work center, PP-PM integration will work.
This is the standard scenario in any Process Industry or in case of an Assembly line of a Automobile manufacturing industry.
So it should work. Please check the following points again,
1. Assignment of Work Center to Equipment Master
2. System Condition - '0' Not in Operation in Both header as well as against Individual Operations (in Work Order for that Equipment)
3. Work Order has been released.
4. Same Work Center is used in Routing and the same is Planned for a period.
If we have all the above points right, then while dispatching the Production Order system should show the Period of block and should shift/plan the PO accordingly.
Regards
Sam

Table to find maintainence work center in equipment

Please let me know where maintenance work center data for an equipment is stored ...I searched in EQUI/EQUZ ..but could not find ...PP workcennter is there but Maint workcenter is not found in these tables

Hi,
EQUZ-GEWRK is the work center on organization tab
ILOA-PPSID is the work center on location tab
In each case the work center is stored in a internal format. To find the actual work center / plant, find the CRHD record where OBJID field contains that internal number.
-Paul

How do I create a new Work Center for the transaction launcher and links

Hi
The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
Regards
Declan

Hi Robert,
Thanks again for taking the time to reply.
Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
Is this correct?
Cheers
Declan

Changing operations work center during creation of PM order

Hi all,
I am looking for BADI or EXIT in order to change operationS work center which created from maintenance calls.
Does anyone know such possibility?
Assaf

Assaf,
Have a look at BADI IWO1_TL_INTEGRATION2.
Also see [OSS Note 925072|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925072]
Which system are you running?
PeteA

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

Work center wise production order infomation report

Hi all,
i have a requirement that workcenter wise (with date) production order information with quantity details (plan and actual).
Eg: My production order quantity - 40 nos. (it takes 4 days to finish).
      i have three operation in production order.
      my order scheduled start date - todays date.
In standard, when enter my first operation work center, system showing production order and its quantity (40 nos) . but i need to split that order quantity in report.. means on todays date for particular production order - order quantity = 10 nos.
Clent want like that (with quantity break) report..
Any standard report ???
If customization.... How it can be mapped in SAP.??
Thanks in advance

Hi,
You can use the FM COIS_SELECT_ORDER_DATA_READ.
CALL FUNCTION 'COIS_SELECT_ORDER_DATA_READ'
      EXPORTING
        iv_prod_order_sel       = lv_prod_order_sel
        iv_proc_order_sel       = lv_proc_order_sel
        iv_planned_order_sel    = lv_planned_order_sel
        iv_rem_objects_only_sel = lv_rem_objects_only_sel
        is_objects_to_read      = ls_objects_to_read
        it_parameter            = lt_parameter "General Structure for PARAMETERS and SELECT-OPTIONS
        it_status_hdr           = lt_status_hdr
        it_status_opr           = lt_status_opr
        it_status_cmp           = lt_status_cmp
      TABLES
        ct_ioheader             = lt_ioheader
        ct_ioitem               = lt_ioitem
        ct_iodocl               = lt_iodocl
        ct_ioopdocl             = lt_ioopdocl
        ct_iomamo               = lt_iomamo
        ct_ioconf               = lt_ioconf
        ct_ioopconf             = lt_ioopconf
        ct_iosoconf             = lt_iosoconf
        ct_iogomo               = lt_iogomo
        ct_ioopgomo             = lt_ioopgomo
        ct_iosogomo             = lt_iosogomo
        ct_iogmer               = lt_iogmer
        ct_ioopgmer             = lt_ioopgmer
        ct_iosogmer             = lt_iosogmer
        ct_iosequen             = lt_iosequen
        ct_iooper               = lt_iooper
        ct_iosoper              = lt_iosoper
        ct_ioopcomp             = lt_ioopcomp
        ct_iooppreq             = lt_iooppreq
        ct_iosopreq             = lt_iosopreq
        ct_iooppord             = lt_iooppord
        ct_iosopord             = lt_iosopord
        ct_ioopmst              = lt_ioopmst
        ct_ioopprt              = lt_ioopprt
        ct_ioopcap              = lt_ioopcap
        ct_ioopscap             = lt_ioopscap
        ct_iosocap              = lt_iosocap
        ct_iososcap             = lt_iososcap
        ct_ioopsccf             = lt_ioopsccf
        ct_iososccf             = lt_iososccf
        ct_ioprodlist           = lt_ioprodlist
        ct_iomatver             = lt_iomatver.
This FM get data from the report used by transaction COOIS. If you needed the header data then you can use lt_ioheader table and seperate the data with the date. If you need at operation basis the you can use lt_iosoper table. You can use this FM to create custom report even with the checks like material availability, PRT availability, capacity requirement etc.
Thanks and regards,
Pradip
Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
Edited by: Pradip Ray on Aug 26, 2009 8:27 AM

In the report level user wants two persons against each work center.

Hi Experts,
Please let me know the solution, I have provided scenario below.
check the query which the user is referring to report:
Example
Work center     Person
KNE33102     44003850
According to the user, the names for the Work centers should be as follows:
Work center          Person
KNE33102         44003850,
KNE33102        44003603
I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
Work center        Person
KNE33102           44003850,
KNE33102           44003603
In RSA3 it can be seen that both the records are being extracted
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.

Hi,
As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
Regards
sivaraju

How to reuse standard Activity subcomponents - Appointments, Tasks, Phone Calls and Emails within a custom work center?

Requirement : We have a requirement to reuse the standard Activity subcomponents Appointments, Tasks, Phone Calls and Emails within a custom work centre. The requirement is to leverage and copy all sub functionalities Appointments, Tasks, Phone Calls and Emails available within the standard activity work center. This feature is available within Accounts, Opportunities, Leads etc. (Refer screenshot: Std_Act_Screen.jpg)
We are unable to consume/embed the standard Activity (Work center) sub components Appointments, Tasks, Phone Calls and Emails within the custom work center. This is because of backend consistency check violation UI designer error message displayed. (Refer screenshot:Error while consuming standard activities.jpg)
Ø Open Question:
a. Is there a limitation to consume/embed the standard Activity (Work center) subcomponents Appointments, Tasks, Phone Calls and Emails within a custom work center? We have noticed that this standard Activity Work center subcomponents Appointments, Tasks, Phone Calls and Emails has been repeatedly reused within the application in Account, Opportunity, Sales lead, Lead, Sales Quote Objects.
b. Is there an alternative way in which we can call [Through API etc..] the standard Activity Work center subcomponents Appointments, Tasks, Phone Calls and Emails?
We need your guidance to overcome the error to enable the reuse of the standard Activity Work center sub-components Appointments, Tasks, Phone Calls and Emails within our custom work center or suggest a suitable workaround on how this can be achieved.
Regards .. Dheeraj Saini

Whenever you find out let me know. I wanted to assign a text tone to someone and now in iOS 7 i can't. Or I haven't figured this out yet.

How can I create a new work center

I try to create a new work center.I found a transaction 'OP42' . But I can't set a personal number and name.where should I write them, or should I use any other transaction??
Thanks...

Hi,
Pl go to <b>CR02 -Capacity-Goto menubar select Goto -Individual capacity -Enter personal name here</b>.
Hope this helps.
Regards,
Mani

Error when launching Work Center

Good Day;
I am getting the following error when I try to launch Work Center (Solman_workcenter).
We are running solution Manager on a 4.6C system.
Any ideas??
The URL http://sd07x797.prod.net:8080/sap/bc/webdynpro/sap/ags_workcenter/ was not called due to an error.
Note
The following error text was processed in the system SM1 : Exception condition "FAILED" raised.
The error occurred on the application server SD07X797_SM1_01 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_BPM_SOLUTIONS of program CL_AGS_BP_INTERF_MON==========CP
Method: WDDOINIT of program /1BCWDY/37BSLDTWTRKDYKK9XQEG==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/37BSLDTWTRKDYKK9XQEG==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: IF_WD_COMPONENT_USAGE~CREATE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
Thanks All.
Regards
Don

> I am getting the following error when I try to launch Work Center (Solman_workcenter).
> We are running solution Manager on a 4.6C system.
I'm pretty sure you don't run SolMan on 4.6c.. maybe on the same server but certainly not in the same instance
What support package level is your SolMan?
Markus

System monitoring work center and CEN system

Hi everybody.
I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
Thanks for your answers!!
Fermí

Hi!
I've done finished this issue!
Please follow steps below:
1. Create activity type in T-Code: KL01
2. Go to KP26 to create the realtionship between Cost Center and Activity.
Now you can see new activity in Costing tab.
Regards!
Woody.

Maint. work center

Similar Messages

Maybe you are looking for