Manager Field (Not Mapped) In User Profiles Always Takes Value From AD

Situation:
Removed the default mapping of the Manager field in User Profile.
Set a mapping for a field from BCS connection
Changed the value manually for one User Profile
Started Full Sync.
In Miisclient all agents pass with "success" status
Checking the value of the Manager field in the manually changed User Profile the value is again taken from the AD
Any ideas why this is happening.
And what should be the format of the value which the BCS should return (currently I am trying with "username" (without the domain, because this works with the PowerShell?

Hi,
Any update?
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Sharepoint 2013 Active Directory Import- Manager field not updating

Hi,
SharePoint 2013 Active directory import -Manager field not updating
Concern/Issue-
We are using SharePoint and configured the Active Directory Import .First import it seems everything is working fine and OOB Organization chart built using User profile data is coming out right.
Now the user is moved from one Organization Unit to Another.
Now our Manager field is not Updating .There is change in AD manager attribute but not reflecting in the SharePoint User profile.
Manger field is mapped to "manager" attribute in SharePoint.
We tried removing the user and Re-Import using Incremental import but no luck.
Thanks for help in advance
Sachin

Moving a user from one OU to another in AD won't normally change the Manager attribute in AD. You would need to edit the user's organization settings to change the manager value in AD. I've also seen these changes not be picked up unless something
other than just the manager field in AD changing. Try changing something like Office location and see if the manager change is picked up by AD Import.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Problem in person not mapped to user in infotype

Hi All,
We have one scenario MM workflow here HR escalation paths defined .Here maintained one FM get Approver for requisition.in that Determine document value,after determine WBS element,after determine responsible person/position ,after maintained position holder,after that maintained determining userID.here workflow output giving person not mapped to user in infotype 1010 but HR functinal people is saying infotype maintained.
any one get the same problem plz help.
regards
Raj

Hi Arghadip,
Sorry previously i given wrong infotype corrct infotype is 0105.
Here i asked HR people they are saying PERNR is maintained with User Id in Infotype 0105.
regards
Raj

Why can't apple user share or take data from Andriod?

1.why can't apple user share or take data from Andriod?

I was able to easily move all my data from my Android phone to my iPhone when I switched. But, that could be, because, instead of complaining, I actually asked questions that made sense, listened to the answers, did some reading and figured it out.

Issue in mapping custom user profile property with AD field in SharePoint 2013

Hello,
I am trying to map a custom user profile property i created "ADSecurityGroups", type - String, Multivalue with the AD propoerty named "memberOf" via powershell.
UserProfile Service is up and running, and so is the Synchronization Service. User executing the powershell has full control on the User Profile Service and is the farm administrator.
Following is the code snippet i grabbed from the internet which i am trying to execute.
Add-PSSnapin Microsoft.SharePoint.Powershell -ErrorAction "SilentlyContinue"
$url = "http://<servername:port>/" #URL of any site collection that is associated to the user profile service application.
$spsProperty = "ADSecurityGroups" #Internal name of the SharePoint user profile property
$fimProperty = "memberOf" #Name of the attribute in FIM/LDAP source
$connectionName = "UserProfileSyncConnection" #Name of the SharePoint synchronization connection
$site = Get-SPSite $url
if ($site)
Write-Host "Successfully obtained site reference!"
else
Write-Host "Failed to obtain site reference"
$serviceContext = Get-SPServiceContext($site)
if ($serviceContext)
Write-Host "Successfully obtained service context!"
else
Write-Host "Failed to obtain service context"
$upManager = new-object Microsoft.Office.Server.UserProfiles.UserProfileConfigManager($serviceContext)
if ($upManager)
Write-Host "Successfully obtained user profile manager!"
else
Write-Host "Failed to obtain user profile manager"
$synchConnection = $upManager.ConnectionManager[$connectionName]
if ($synchConnection)
Write-Host "Successfully obtained synchronization connection!"
else
Write-Host "Failed to obtain user synchronization connection!"
Write-Host "Adding the attribute mapping..."
$synchConnection.PropertyMapping.AddNewMapping([Microsoft.Office.Server.UserProfiles.ProfileType]::User, $spsProperty, $fimProperty)
Write-Host "Done!"
The script is failing with the following error -
new-object : Exception calling ".ctor" with "1" argument(s): "UserProfileApplicationNotAvailableException_Logging ::
UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 2f9bece3-f39a-498d-874f-145b1470e49c"
At E:\ADSync.ps1:29 char:14
+ $upManager = new-object Microsoft.Office.Server.UserProfiles.UserProfileConfigMa ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvocationException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.PowerShell.Commands.NewObjectCommand
Please let me know if i am missing anything.
Also advise if this is the correct way to map user profile attribute in SP 2013 ?
Thanks -
Girish

ok no worry,
try to run the below as it is, i m just copying code from your post.
Add-PSSnapin Microsoft.Sharepoint.Powershell
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.Office.Server")
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.Office.Server.UserProfiles")
#Function to get servicecontextfunction Get-SPServiceContext([Microsoft.SharePoint.Administration.SPServiceApplication]
$profileApp)
$profileApp = @(Get-SPServiceApplication | ?
{$_.TypeName -eq "MR_DEV_UserProfileServiceApplication"})[0]
return [Microsoft.SharePoint.SPServiceContext]::GetContext
($profileApp.ServiceApplicationProxyGroup,
[Microsoft.SharePoint.SPSiteSubscriptionIdentifier]::Default)
$url = "http://sp-appdev:2013" #URL of any site collection that is associated to the user profile service application.
$spsProperty = "RoomNumber" #Internal name of the SharePoint user profile property
$fimProperty = "extensionAttribute2" #Name of the attribute in FIM/LDAP source
$connectionName = "LDAP Sync" #Name of the SharePoint synchronization connection
#Get UserProfileManager
$serviceContext = Get-SPServiceContext
if ($serviceContext)
{Write-Host "Successfully obtained service context!"}
else
{Write-Host "Failed to obtain service context"}
$upManager = new-object Microsoft.Office.Server.UserProfiles.UserProfileConfigManager($serviceContext)
if ($upManager)
{Write-Host "Successfully obtained user profile manager!"}
else
{Write-Host "Failed to obtain user profile manager"}
$synchConnection = $upManager.ConnectionManager[$connectionName]
if ($synchConnection)
{Write-Host "Successfully obtained synchronization connection!"}
else
{Write-Host "Failed to obtain user synchronization connection!"}
Write-Host "Adding the attribute mapping..."
$synchConnection.PropertyMapping.AddNewMapping([Microsoft.Office.Server.UserProfiles.ProfileType]::User, $spsProperty, $fimProperty)
Write-Host "Done!"
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Custom User Attributes not visible on user profile in OIM 11g

hi ,
As I have created a custom attribute in OIM11g. I am not able to view the attribute after I crate a User in OIM.
Please help me in solving my issue .
Thanks
srikanth

It's a very basic thing. Just try creating an Authorization Policy and you would know how to do it. For your refernce I am also pasting the excerpt from the same Metalink Article
After creating the UDF, please follow the below steps to make the UDF visible for modification by an admin user:
1. Navigate to create a new 'Authorization Policy'as below:
a. Login to UI and click on Administration
b. On the top left you will see the Authorization Policy tab
c. Now click on Create Authorization Policy
2. Please use the below information to create the Authorization Policy
a. Name: UDF policy
b. Entity Name: User Management
c. Permissionsc. Permissions:
i. Modify User Profile
ii. View User Profile
Please make sure that the UDF is selected in the attributes for these permissions.
d. Data Constraints: All Users
e. Policy assignment: All Users
3. Create a user called "useradmin' and add the below 2 roles:
a. All Users (This is default)
b. Identity User Administrators (This will provide the administrative tab to this user so that he can administer other users)
4. Create another end user called 'testuser1' populations the necessary fields.
5. Now login as 'useradmin'
6. Search for a user called 'testuser1' and open the user.

Some links and social network features not active in user profile service for some users in sharepoint 2013

Hi everyone,
I installed user profile service and synchronize. When I go to my site by administrator user every things is OK.
But when I login by another user the my site is look like this
Please guide me to resolve this problem.
Thanks in advance.

Can you please check and share mysite setting details. Check for below:
Create a site collection at the root using the My Site Host template
Assuming you want users’ MySites to be created at
http://mySiteHost/personal/[John_Smith], create a Managed Path for the web app. The path should be personal, and the type should be
Wildcard Inclusion.
In User Profile Service Application, set My Site Host location to
http://mySiteHost, and
Personal Site Location to personal.
Enable Self-Service Site Creation for the web app
Check when the timerjob was mysite last executed. Try to manually run them
Check ULS Log for possible error and share error details with us
If this helped you resolve your issue, please mark it Answered

How to stop user profiles clean-up job from deleting Active users.

Hi,
Somehow bunch of active users profile are marked for deletions and their managers have received email saying it will be deleted in X days.
I know if we disable My Site Clean Up Job, it will not delete any profiles. But I want that job to continue running and stop active user profiles from getting deleted.
How do I proceed here...
Thanks,
Abhilash

Hi Abhilash,
I understand SharePoint 2010 MySite clean up timer job is deleting active user profiles.
Firstly, I need to confirm with you that the timer job will work on below two situations:
1.When you use the web UI in Central Administration to delete a user profile
2.When a user who was included in a previous user profile import is no longer included in the import.
The second point bears a little more explanation, please refer to How Is A User Profile Deleted?
in the article below:
http://blogs.msdn.com/b/kaevans/archive/2012/06/25/top-recommendations-for-managing-the-my-site-cleanup-timer-job.aspx
Let me know if you situation is not included in the above two.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but value comes

HI All
I have problem with 0GR_VAL_PD kf in 0PUR_C01 cube. 0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but in report level, value is coming for purchase organisation,material group .
But GR value as at posting date (0GR_VAL_PD)value not coming for particular material group or purch. org. but some days before, values were coming for particular material group or purch. org..
so need your help.
Thanks n Regards,
Gaurav Sekhri
Edited by: gaurav sekhri on Aug 18, 2010 11:41 AM
Edited by: gaurav sekhri on Aug 18, 2010 11:43 AM

Hi Susan
Which datasource you are using at present. Normally 0PUR_C01 gets loaded from 2LIS_02_ITM and 2LIS_02_SCL. The keyfigure that you have mentioned will come from 2LIS_02_SCL with the code that you have written.
The code that you have written should work. Please check if the code is in the transformation from 2LIS_02_SCL.
Share the details on why do you think the solution didn't work.
Regards
Karthik

Fields of the material BOM are overwritten by values from customising.

I have the an issue wherein I am trying to update a material BOM, and I pass a blank value to REL_COST (or SANKA ) in item. But somehow in the function module CSAP_MAT_BOM_MAINTAIN it gets defaulted to X while posting the BOM update.
When I use the function module CSAP_MAT_BOM_CREATE to create BOM it works fine. I see there is OSS note 1012556, but looks like it is valid for different function module CDESK_BOM_WIZARD, which is relevant to my scenario. However that function module is for dialog mode and not released yet.
I pass below values to T_STPO structure, rest all fields are initial. 
 
ITEM_CATEG L 
ITEM_NO 0020 
COMPONENT 4000018468 
COMP_QTY 300.000 
COMP_UNIT EA 
FIXED_QTY 
ITEM_TEXT1 TEST 
ITEM_TEXT2 TEST 
REL_COST 
MAT_GROUP 241416W1 
ID_ITM_CTG L 
ID_ITEM_NO 0020 
ID_COMP 4000018468 
 

I have this same issue.
I found a workaround, passing "!" instead of space when I want to reset fields such as cost relevancy, text1 and text2. My issue is on CSAP_BOM_Maintain.
So for your solution, you just call the same function 2x with same values?

Can one field of a variant of an ABAP4 program takes value from a table ?

When I run an ABAP4 program, there is one input field called Time Stamp. If I run the program directly (without selecting a variant), this Time Stamp field is filled with a field value from a table called TVARVC, but if I select a variant of this program, this Time Stamp field is filled with another field value of the table TVARVC. It seems that the variant value can be filled with a value in system table, am I right? If this is the case, then how it is programmed?
Thanks
Message was edited by: Kevin Smith

Hi Kevin
In the table TVARVC you should insert a new record which name (field NAME) have to begin with SAP_SCMA_ and the type (field TYPE)is P for parameter or S for select-options and the values (field LOW and/or HIGH) are your value.
So you have to create a variant and for input field Time Stamp set flag SELECTION VARIABLE and then push button SELECTION VARIABLES. Now you have to insert the name of your record of TVARVC.
So when user choose this variant the input field Time Stamp is filled with value you have entered in TVARVC.
Now in TVARVC you can insert another record (if you want it isn't avaible for SELECTION VARIABLE function in the variant, you should give it a name it doesn't begin with SAP_SCMA_) and put this value in the input field Time Stamp during INITIALIZATION event:
INITIALIZATION.
SELECT * FROM TVARVC WHERE NAME = ......
Time Stamp = TVARVC-LOW.
Max
P.S. you have opened two post with the same problem, close older one.
Message was edited by: max bianchi

User Exit Variable picking values from InfoProvider

Hi,
I've created a User Exit variable (of type Interval, Mandatory) on 0CALMONTH and populating it in exit.
The problem is at the time of query execution, I get "BRAIN 657" error i.e. "Value <value> is Invalid for Variable <variable name>".
After doing some analysis I figured out that once the user-exit code is performed, system validates the entries populated in this Variable against the values in InfoProvider and gives error when it doesn't find those values.
E.g. lets say InfoProvider has values for 0CALMONTH from 06.2010 till 10.2010 and if I populate my variable with range 03.2009 till 12.2010 then it throws above error. But if I populate the variable with exact values i.e. 06.2010 till 10.2010 then it works.
Any idea how can I remove this validation and populate with my own value range?
Regards,
Vikrant.

hi remove that default value from the variable.
and you shd be able to run the query without any problem.
regards,
VJ

Subprocess 33 was not successful. Master cannot read return value from S 33

Hi All,
We are on BI 7.0 SP 19.
We have submitted a planning sequence in the background with automatic packaging.
The planning sequence has two steps:
Step 1. Z_PLNG_FUNCTION1
Step 2. Z_PLNG_FUNCTION2
As per automatic packaging, the system chose 0ACCOUNT for packaging.
When submitted, each step has been submitted to 30 packages as 30 subprocesses.
For Step 1, the log shows that All subprocesses executed.
For Step 2, the log shows that the subprocess 33 and 58 failed, which means subprocess #3, and # 28 for the step 2 as the subprocess is numbered in the log in combination with step 1.
The messages in the log for the failed subprocesses are as follows:
@5C\QError@     Subprocess 33 was not successful
@5C\QError@     Master cannot read return value from subprocess 33
@5C\QError@     Subprocess 58 was not successful
@5C\QError@     Master cannot read return value from subprocess 58
Our question is on how to find the exact cause of the subprocess failure.
I tried to look for the details on the error messages, they have been not helpful.
What is meant by 'Master cannot read return value from subprocess' and how to get the exact cause of the failure?
Thanks in advance,
Best Regards,
- Shashi

Shashi,
implement the following notes and check again:1368659, 1525723, 1532061.
Regards,
Marc
SAP Techology RIG

Password Field not mapped between Request and Provisioning Form

Hi to all. I'm working with OIM 11g. I've faced a strange issue. I'm not sure I'm working properly, so let me explain you my case. In my installation I've got the SSH connector, which is correctly connected with the physical resources. I've loaded the resource dataset ProvisionResourceSSH User bundled with the connector. Consider now that the user "goofy", with "ALL USERS" role, tries to make a request Provision Resource SSH User (Request Based provisioning). He fills in all the field in the appropriate manner, but when OIM triggers "Create User" provisioning task, after the required approval process, the password field is always blank (although goofy filled it in!!!).
I've thought: "ok, it seems a role trouble". And effectively, if goofy has got also the role "REQUEST ADMINISTRATORS", the provisioning form shows the password field correctly valued (as goofy stated in his request).
Note that all the fields are correctly mapped between request dataset and the provisioning form (I'm using the original dataset and the original provisioning form installed by the connector). So all other fields filled by goofy on the request form (request based provisioning) are correctly passed to the provisioning form. All the fields, except for the password.
Am I wrong in something? How Could I make possible to pass the data filled on the request for the password field to the provisioning form even if the requester has not the role "REQUEST ADMINISTRATORS"?
Thank you in advance for the help.

This sure seems goofy! ;-) ... can you try making the ALL Users have all the permissions on the Resource Object and the Process Form and test it out? Also try from the backend at the database and see if the table has NULL for the password field? ... What's the type of password field in the dataset and the process form? Encrypted/Secret at both ends or mis match? Try making them plain text both the places as well.
-Bikash

Manager Field (Not Mapped) In User Profiles Always Takes Value From AD

Similar Messages

Maybe you are looking for