Manual de Integracao v300-2009-03-16 - SAP 4.7 SP30 preparado para NF-e?

Boa tarde,
Estou iniciando um projeto de implementação de MP135 + NF-e + SPED na versão 4.7 do SAP, este ambiente encontra-se atualizado com o SP30.
Gostaria de saber se é possível configurar a NF-e com base no novo layout definido no "novo" manual de integração do contribuinte (emitido em 16/03/2009) versão 3.00, a versão 4.7 com SP30 está preparada?
Como estamos iniciando a fase de blueprint, foi colocado por parte do cliente o interesse de implementação da NF-e com esta nova versão, permitindo desde já que a empresa emita NF-e já novo layout definido.
Desde já agradeço pela atenção,
Att,
André Teixeira

Bom dia André,
O projeto NF-e no R/3 4.7 tem como prerequisito mínimo o SP 30, conforme SAP Note 989115. Então você está tranquilo quanto a isso. Faça uma busca em XX-CSC-BR-NFE no market place filtrando este support package para obter a lista de notas que deverá aplicar em seu ambiente.
Fiz uma rápida análise no manual 3.0 e concluí que as principais modificações são relacionadas ao DANFE, que no manual 3.0 diserta sobre a possibilidade de impressão em formulário contínuo e também a diferença do DANFE em contingência. O novo manual aproveita para documentar novas rejeições, novos retornos de protocolo (adicionando valores para o SCAN/DPEC), e o consulta de cadastro de emissor (atualmente sem suporte).
O layout utilizado continuará sendo o 1.10, com mínimas modificações no domínio de alguns campos (ex.: bairro exige hj de 1 a 60 caracteres, está mudando para 2 a 60 caracteres).
Respondendo sua pergunta, a solução SAP/GRC pode emitir NF-e conforme este novo manual pois o layout 1.10 já é suportado, regras de validação deverão ser atualizadas no GRC para evitar falha de schema (215/225) na Sefaz.
Atenciosamente,
Fernando Da Ros

Similar Messages

Manual for creation of new Plant in SAP

Hi Members,
I need to test in quality finance related activities, creation of Profit center, Cost center, Standard Heirarchy, etc.. Does anyone help me with the manual for role of Finance guy in creation of new Plant..
Rgrds,
Ravi

Hi Ravi,
Please find the below link for steps to create plant with screens.
http://www.saponlinetutorials.com/how-to-create-plant-in-sap-mm-define-plant/
BR, Srinivas Salpala

XML structure in SAP XI for receiving output para of AS400 stored procedure

Dear all,
I submit a stored procedure of AS/400 via SAP XI with JDBC adapter by using below XML format. I try to define two output parameters at the end of this XML. How to get the return value ? Should I define a response message type ? and what is the XML format ?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SYN_t1 xmlns:ns0="http://xxx.xxu.hk/zxxxpgs/jdbc">
<update>
<storedProcedurename action="EXECUTE">
<table>LIBRARY.PANSYTEST</table>
<TRNX_TYPE IsInput="TRUE" TYPE="CHAR">4</TRNX_TYPE>
<TRNX_NO IsInput="TRUE" TYPE="CHAR">2</TRNX_NO>
<ACTIN IsInput="TRUE" TYPE="CHAR">23</ACTIN>
<RCRT_DATM IsInput="TRUE" TYPE="CHAR">3</RCRT_DATM>
<RCRT_USER IsInput="TRUE" TYPE="CHAR">8</RCRT_USER>
<STUD_ID IsInput="TRUE" TYPE="CHAR">8</STUD_ID>
<AWD_SEQ IsInput="TRUE" TYPE="CHAR">6899</AWD_SEQ>
<AW_PSDATE IsInput="TRUE" TYPE="CHAR">89</AW_PSDATE>
<AW_PEDATE IsInput="TRUE" TYPE="CHAR">99</AW_PEDATE>
<OUT_TRNX_TYPE IsOutput="TRUE" TYPE="CHAR">4</OUT_TRNX_TYPE>
<OUT_TRNX_NO IsOutput="TRUE" TYPE="CHAR">2</OUT_TRNX_NO>
</storedProcedurename>
</update>
</ns0:MT_SYN_t1>

Send a message to DB, that you see how the response looks like.

SAP R/3 integration with (Manual) Third-party App

Hi All
I am working on a scenario in which Third Party application has functionality which actually refines & correct the data upto the accuracy of 99%. So for this end-user needs to enter bit of information on their front-end then application will return the data on the basis of that information.
Now the problem has different parts -->
*) If I choose that SAP R/3 will initiate the ( Synchronous ) process then ABAPers raised the concern that they will not be able to display the response data on correct SAP screen also how to actually access the front-end of Third party.
Third-Party is ready to replace the Front-end with the web-service but then end-user will not be having the functionlity to select different options which is the strong part of Third-party application & also client is not agree to that.
Do you think I should use BPM in above solution with correlation on some field to identify the SAP screen.
*) If I choose Third Party application to initiate the ( Asynchronous ) process then again ABAPers raised the concern that how to display it on the correct SAP screen & how they know that data is coming at this point of time & they need to display it. Also Third Party said in this case they don't have expertise to customize their Front-end application & which will lead to additional cost to hire other developers.
Now can you suggest some good solutions for this kind of scenario in which an application needs the Manual intervention & needs to be integrated with SAP R/3. Also suggest from which direction I should initiate the process.
Thanks
- Lalit Chaudhary -

Matias
<<<< with front-end do you refer to SAP R/3 ?
No Matias with Front-End I meant Third Party is providing the web-page where end-user can enter the details & those will be refined & corrected by the Third-Party Application.
<<<<< Which ways has the Third-Party app to connect with (file, database, jms, etc.).
Third-Party App is providing Java Classes & Web-Services for integration but we don't want to access them directly, first of all we would like to invoke/access the Front-end application.
<<<< What is the purpose of this third-party app ? just to receive data, validate it and return it once it is corrected ?
Actually in this Front-end user can enter the data on given fields & data will be keep on refining while he is entering the more information into that given field. For e.g if the field says "City" & user enters "DE", a drop-down will come with all the cities in the world starting with "DE" like Delhi, Denmark etc.Once all the fields are populated with correct data user will click on "Submit" button which will send the data to SAP R/3 ( which we wish to do ).
Now in this case when user will click on Submit button ( means Third-party will initiate the process ) & data will be send to XI using ( for e.g ) HTTP sender then ABAPer's raised concern that how they will be able to show it in the right screen without using proper thread ID.
Pls. let me know in case you require any further information. My problem is this how to relate the Third-Party data with correct screen of SAP.
Thanks
- lalit -

Want to maintain manual invoice number and amount in SAP

Hi Experts!
Currently I am facing one issue to keep tracking of the manual invoices that were actually submitted to customer.
Amount in Manual invoice may be the club of SAP Invoices.
To provide customer a error free Statement of Account, we need to maintain the manual invoice with following parameters:
1. Invoice Number (Manual)
2. Manual Invoice Date
3. Manual Invoice LPO Number
4. Manual Invoice Amount
Also I want to know with which transaction the statement will print alongwith manual invoice references for making error free final statement of account.
best regards,

Hi Adnan,
Not sure if I understand your requirement. Are you worried about the periodic (?) statement of account, or about posting of invoices in a way that they show up correctly?
As for account statements, there are two main standard options:
a) "Periodic account statements" - trans. F.27. You can schedule them regularly or ad-hoc. To make them work, you need to maintain a form behind a selected correspondence type (e.g. SAPP3) and then maintain an "account statement" indicator in vendor/customer master record (KNB1-XAUSZ, in Correspondence screen, has to be configured).
b) Balance confirmation letters - trans. F.17 for customers or F.18 for vendors. They provide more flexibility in the layout of the form (e.g., first request, reminder, blind request, etc.) but in general are focused on "open items as of key date" which may not be what you require.
Now, what do you need to print for each invoice? Invoice number can be either FI document nr (BELNR) or Reference (XBLNR) if you keep track of invoice numbering separately. Date and amount can also be printed on both types of statements (you need to make a choice between document and posting date). What is LPO number?
Check these options and let us know what further question you have.
Good luck,
Jan

SPED Contábil / Fiscal e NF-e. Quais pontos a SAP atenderá?

Senhores,
Eu tenho uma lista do que mais ou menos seremos obrigados a ver no futuro, diante das obrigações que o governo está solicitando. Gostaria de saber sobre quais pontos abaixo a SAP tem planos de atender:
1. Relacionados ao SPED Contábil:
1.1. e-LALUR;
2. Relacionados ao SPED Fiscal:
2.1. Inserção de dados de CIAP no SAP para fins de SPED Fiscal (geração do bloco G);
2.2. Geração do bloco G no arquivo EFD - O prazo para iniciarmos a geração deste bloco segundo o governo é Janeiro de 2011;
2.3. Geração de créditos para PIS e COFINS, muito semelhante a que ocorre no CIAP ICMS;
2.4. Geração de arquivo EFD PIS / COFINS. O prazo para iniciarmos a geração deste arquivo segundo o governo é Janeiro de 2011.
2.5. Entrega dos arquivos digitais da Declaração Crédito Acumulado do ICMS em atendimento a Portaria 83/2009.
3. Relacionados à NF-e:
3.1. NF-e versão 2.0 (pode ser que a SAP gere notas de correção/implementação para tratar este ponto);
3.2. Tratativas dos Ajustes SINIEF 03/2010 (Indicação do CRT - Código de Regime Tributário na NF-e, talvez no DANFE) - prazo: 01/10/2010 e 09/2010 (Obrigatoriedade de envio e recebimento dos Arquivos XML; Emissão NF-e em situação de contingência; Carta de Correção Eletrônica).;
3.3. Capa de Lote Eletrônica para o Estado do Amazonas (Protocolo ICMS 90/2010).
No aguardo,
Daniel

Relacionado à NFe
3.1. NF-e versão 2.0 (pode ser que a SAP gere notas de correção/implementação para tratar este ponto);
+*Sim, a SAP estara disponibilizando o Sp15 que irá finalizar o processo de comunicacao com o SEFAZ em ambos os formatos, o antigo e o novo, e ja existem algumas notas que devem ser aplicadas para que os novos parametros já sejam enviados ao GRC, inclusive deve ser aplicado o Sp14 , o SP 15 esta previsto para 27 desse mes*+
3.2. Tratativas dos Ajustes SINIEF 03/2010 (Indicação do CRT - Código de Regime Tributário na NF-e, talvez no DANFE) - prazo: 01/10/2010 e 09/2010 (Obrigatoriedade de envio e recebimento dos Arquivos XML; Emissão NF-e em situação de contingência; Carta de Correção Eletrônica).;
+*Entendam o seguinte, o envio nao é obrigatorio, vc pode enviar ou DISPONIBILIZAR o xml, entende-se que disponibilizar é caso o cliente solicite vc envie para ele atraves de e-mail ou qualquer midia digital para que ele apresente ou armazene para futuras fiscalizacoes. A SAP possui o processo de B2B que envia o XML via e-mail e recebe tbem via e-mail armazenando em tabelas proprias*+
3.3. Capa de Lote Eletrônica para o Estado do Amazonas (Protocolo ICMS 90/2010).
+*Por enquanto isso é uma aprticularidade do Amazonas, provavelmente a SAP nao tera uma solucao para isso no momento ou talves nem exista, vc tera que fazer uma solucao propria por enquanto+*

Sap note 1507799 - Sec 80CCD - pension contribution notified by central gov

Dear
I have applied the sap note 1507799 - Sec 80CCD - pension contribution notified by central govt. and have done the necessary manual config steps as mentioned in the sap note.
When i am trying to check this pension contribution notified by central govt item in IT0585 and IT 0586.
i am unable to get this item.
Regards
Vish

Hi ,
First do the manual changes & then apply the note. You will get "Contribution to pension scheme of Central Goverment" this option in IT 585
Regards,
Mahesh

Crystal report parameter problem while uploading in sap business one

Hi
All
I designed a crystal report using
stored procedure
and
Routemas user defined table
in sql server with three parameter
routname,from date,to date
these parameters are from storedprocedure only but not created in report
i set the parameter routename as dynamic and i assigned the routename field from routemas table
when i run the report in the parameter window it displays the list of routenames
upto this is k but
when i upload this report in sap business one 8.81 PL-05 and
run this report in sap environment First it asks parameters there
it didnt display the list of routnames
when the parameter routname is set as static and assign some routenames manually
then it shows the list in sap environment
Can any suggest the answer
Edited by: madhu ganga raju on Oct 17, 2011 7:06 AM

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

You cannot reconcile a/p invoice transaction with A/P Down Payment request manually

Dear Experts,
One of my client has facing this problem while doing Reconciliation then he is getting the following error.
"you cannot reconcile a/p invoice transaction with A/P Down Payment request manually"
then we found a solution in SAP Forums and applied the same in Test Company Environment, then its working good and also attaching the scenario with screen shot.
Please have a look into the attachment then tell us. Is it a good practice to proceed or is there any solution as simple as this.
One more thing is my client has having more 20000 records to do reconciliation and he is looking for any alternative solution.
So please tell us a Better solution.
We are awaiting for your prompt response.....

Hi,
Please check SAP note:
1340606 - Paid Down Payment Request cannot be reconciled
internally.
Thanks & Regards,
Nagarajan

PAR Example from SAP site is not working

Hi Experts,
I downloaded a par file com.sap.netweaver.bc.rf.explorer.par from the following URL:
<a href="https://media.sdn.sap.com/html/submitted_docs/nw_kmc/examples/com.sap.netweaver.bc.rf.explorer.par">https://media.sdn.sap.com/html/submitted_docs/nw_kmc/examples/com.sap.netweaver.bc.rf.explorer.par</a>
Deployed this PAR Project into the Netweaver Developer Studio.
I uploaded the PAR to the Server by clicking on the "Quick PAR Upload" menu.
Then i opened the portalapp.xml which resides under "dist>PORTAL-INF".
In portalapp.xml i found run button in front of 5 components.
On clicking on the any "Run" button, browser gets invoked which displays the following exception message and errors:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.KMC/high_safety).
Exception id: 06:54_27/11/07_0049_14261850
See the details for the exception ID in the log file
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.KMC/high_safety).
Exception id: 07:29_27/11/07_0050_14261850
See the details for the exception ID in the log file
Can anybody help me out why these exceptions are coming?
Where to find out the log files for details?
Please help me out, i m in a big mess.

Hi Pankaj,
When you import a PAR file into the NWDS, the jar files in the PORTAL-INF\lib and PORTAL-INF\private\lib are not included in the import.
You have to manually copy the concerned jar files to these folders.
So unzip the par file and copy the jars in your project maintaining the same folder structure.
This will solve your error.
Regards,
Ankit
Reward points if helpful.

Error occured during installation SAP Netweaver 2004s ABAP Trial Version

Hi,
during the installation an error occurred.
log.txt:
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I've run RegCleanTool and rerun the installer, result: the same error.
System specs:
Windows XP SP2
Hardware. AMD Athlon XP 3200+, 2,19 GHz, 1,25 GB Ram
The MS Loopback Adapter is correctly installed and ping on permanent IP adress 10.10.0.10 returns ok.
What's wrong?

Hello,
Try to install the MaxDB software manually, then continue with the installation of SAP Netweaver. Check whether there is any another entry of same SID into NSP? if yes then use any another SID for Netweaver system.
Best Regards,
Sachin

System copy from SAP R/3 47x110 with Oracle 10.2 to Oracle 11.2

Hello,
I want to do a system copy from SAP R/3 4.7 Enterprise 47x110 with Oracle 10.2 to a new machine with same SAP version but with oracle 11.2. (After this I will upgrade to ERP 6.0)
I will do this with export/import but I don't find any documentation (manuals or notes).
I only find this:
Note 1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10
but this note is only for a new installation, I don't know if this work with system copy
Note 516246 - INST- System Copy for SAP Systems based on SAP Web AS 6.20
This don't have information about oracle 11.2
I read the manual "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20" but this also don't say nothing about oracle 11.2
Can you help me? Where can I find this documentation and what DVDs (master and kernel) should I use?
Best regards

Hi Juan,
Thanks for your answer.
That is my doubt, what installation master shoud I use for export oracle 10.2 and import in oracle 11.2?
Note "1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10" say that I can use installation master of R/3 4.7 Set 2 (47x200) to install a new system.
I found this media:
51033746_9 Installation Master 6.20/6.40 Linux on x86_64 64bit
and
51040087_7 NW 04 SR1 Inst. Mst. Linux x86_64 64bit f. Oracle 10.2/11.2
I think this is the note that I need:
Note 1478351 - Oracle 11g Support on UNIX: 6.40-Based SAP Systems

Can SAP run the depreciation for closed Period and posting to diff month?

My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
I am just wandering whether SAP can handle this different way.
Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
Cheers

Hi
Yes, you can do that
Follow this thread... Unable to post depreciation- Error AA730
Using ABF1, you can do it
Br, Ajay M

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Manual accruals in rebates

hello,
i have configured rebates and the system is accruing rebates in the customer billing documents i create. the pricing procedure is ZXP001. my questions are as follows :-
1) do we have to use the same pricing procedure zxp001 in manual accruals order type and it's credit memo request and the same pricing procedure in partial order type/ final settlement order type and their credit memo req ?
2) after creating one billing document. when i see the rebate agreement sales volume, the figures are as follows :-
a) total value column shows 200 eur , total accruals value is 200.
i created a partial payment of 50 and then the revised figures in sales volume are as follows.
total value colum is 150 and total accrual value is 150.
now i created a manual accural of 25 eur, the system now shows the following values in sales volume as .
total value column 150 and total accrual value is 125 ? .
my question is on doing manual accrual, the system should increase the total accrual value to 175(150+25 ) but the system reduced it to 125 (150-25) ..... why this is so ?
the total value column should show 175 since the customer is entitled to more rebates of 25 eur thru manual accural but it is showing 150 in total value column ... why this is so ?
regds
pamela

Dear Sachin,
In rebate process we ahve Manuall accruals and Posting accruals manually but I don't know about manual payment.
Please go through this SAP help link it will help you about Rebates process detailly in the Sales and Distribution.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/561270545a11d1a7020000e829fd11/frameset.htm
I hope this will help you,
Regards,
Murali.

Manual de Integracao v300-2009-03-16 - SAP 4.7 SP30 preparado para NF-e?

Similar Messages

Maybe you are looking for