Maps works perfect for me

Maps works great for me. Sorry it doesn't work for you. I typed my son address, and all I had to input was the street name and number, maps showed me the city, state, zip code. Better than any other GPS I have had.
It is like everything Apple. Writers that know nothing about technology, and people with mostly a vested interest in seeing all things Apple look bad(google, android fans, free software people et.al, the paid ones by companies far away!).
But, where are all those new iPads burning people's hands? In the minds of their creators...LOL.

I also have no problems with the maps app. I have used it twice now and it was better than my Magellan. Especially in regards to entering my destination.

Similar Messages

Elements 7.0 worked perfectly for many years then stopped working about 1.5 months ago

Elements 7.0 worked perfectly for many years then stopped working about 1.5 months ago. I just finished at chat session with Adobe support, but we did not find a solution. At the very end, when I tried to run Elements in the sandbox, I got an error message saying that my licensing stopped working.

I have been trying to troubleshoot with Verizon support via twitter as well. So far I have gotten, to simply turn location off for 12 hours and afterwords see if it works again. This did not work. They said engineers are looking into it. Additionally this was a replacement phone via the HTC advantage program so I assume it is refurbished. I did not use GPS until the 5,0,1 android update coincidentally so I do not know for sure it worked when I got it.
The 2nd link shows the possibility of GPS breakage during the initial teardown of a return. Sadly the other issue is extreme battery drain. A 5 min phone call took 5% power and standby for 2 hours took 30%. No active background apps beyond stock, no auto sync, all devices but 4g data and WiFi turned off.
I think the software is not to blame. Seems HTC sent me an incrediby faulty phone.

I use Time Machine with an external hard disc which has worked perfectly for some years. Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system. Any ideas?

I use Time Machine with an external hard disc which has worked perfectly for some years. Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system. Any ideas?
Has Apple recently up-dated my OS (Lion) such that every time the screen saver starts it disables Time Machine. I have to switch-off the computer and re-start in order to undertake a back-up. I have now switched of all screen savers.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
Cannot receive any signal "searching" constantly.
Turns off as soon as removed from usb ... wont stay on connected to laptop!
HELP!

The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
Hardware can fail - it happens, which is why there is a one year warranty.

It's working perfectly for me now

I have to say that having been one of the early complainers about MainStage, I've now gotten to a point where MainStage 2 itself is working perfectly for me, and in the one case where I'm having a problem, I believe it's due to one of the plugins (Omnisphere) rather than MainStage itself.
I had a lot of difficulty getting MS2 to work flawlessly with external MIDI devices and it turns out that I had multiple levels of "bugs" that all had to be addressed. Addressing things one at a time didn't help and of course that left me "convinced" that MainStage itself was broken.
Turns out that after I fixed all the stuff that I had misconfigured, the reason I continued to get glitches (stuck notes from time to time) was due to a problem with my MOTU MIDI TimePieces (MTP). Although it took a long time before I was willing to suspect them (because they seemed to be working fine with other software), I finally took the plunge and experimentally disconnected the MTPs and replaced them with an Roland UM-880. I chose that after discovering that even though it's not made anymore, Roland is still supporting that device and had Snow Leopard drivers for it. I was able to find one on ebay.
My entire live rig now works perfectly with no glitches and it is an absolute pleasure.
Now of course that doesn't mean I don't have a wish list but I did want to set the record straight about my experience, a rather painful few months from beginning to end.
Must go now, have to play some music!

dhjdhj wrote:
I had a lot of difficulty getting MS2 to work flawlessly with external MIDI devices and it turns out that I had multiple levels of "bugs" that all had to be addressed. Addressing things one at a time didn't help and of course that left me "convinced" that MainStage itself was broken.
Thanks for posting back and clearing the air.
I still think Apple would do themselves better if there was some kind of documentation that covered the upgrade and possible problems. Not everyone will persevere as you have.
pancenter-

I have a Targus Versavue bluetooth keyboard that has worked perfectly for 2 years. It lost connection yesterday. I charged the battery but it still won't connect. Help ??

I have a Targue Versavue bluetooth keyboard that has worked perfectly for 2 years. It lost connection yesterday. I charged the battery but it still won't connect. I just get a blinking blue light. Help ??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1212 After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub. I have tried everything I can think of to get it working again but to no avail. My desktop computer still works through the same hub

After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub although my desktop computer still connects. I have tried everything I can think of, including suggestions off Google/You Tube but nothing makes any difference. Any ideas. Surely it is not fit for the scrap heap after two years, but is clearly no use as it is.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

It's not clear whether you were able to do any backups to this drive at all. If not, it's probably not formatted properly. See #5 in Time Machine - Frequently Asked Questions for instructions.
If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted. Try to repair the backups, per #A5 in Time Machine - Troubleshooting.

P2415Q - No display over DVI, HDMI. No menu. Worked perfectly for one month over display port

Reason Line: Dell P2415Q. After one month working perfectly over display port, no display on screen over Display Port or HDMI, no response to menu buttons, backlight and power LED on but no image on screen.
Problem Description
The monitor worked out of the box for one month using the display port to mini display port cable provided with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supported 4K at 60Hz and was exceptional for photos, videos and games. On Wednesday the monitor stopped working, no image or menu is displayed on the monitor. I plugged in my old monitor to help diagnose via DVI from the same graphics card. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the windows screen resolution menu). It sets it as a secondary display but the monitor remains black, I can see the power LED and backlight is on. No power saving mode popup appears on the monitor, when I press the menu buttons there is no response from the screen, it remains black. I repeated with a HDMI cable the same issue occurs with no response or image. I repeated and disabled crossfire (which allows the graphics cards to function independently) and tried the second graphics card with no response. I tested the HDMI cable I used on my old LG monitor, it works well. I have tried connecting a laptop over HDMI to the monitor too, with no response from the monitor. I have exhausted all the tests I can think of, I presume I will have to return the monitor for repair or replacement under warranty. A question to the dell rep and community - is there anything else I can try / do to get it working?
Monitor / Computer Details
Monitor service tag: <removed>
Computer: Non-Dell, self build about 2 years ago. Ivy Bridge i5, Gigabyte Sniper Motherboard, 16GB RAM, XFX 7970 GPU and XFGX 7950 GPU in crossfire, 256GB SSD, 860W Corsair AX power supply (860W on 12V rails). Windows 7, 64-bit. (Secondary Monitor LG D2342).
Operating System: Windows 7, 64 Bit.
Video Card: XFX 7970 and XFX 7950 in Crossfire (tested separately, monitor produces fault with both).
Video Card Driver: 14.12 AMD Catalyst Driver (rolled back to older driver, monitor still produces fault).
Video Card Output Ports: Tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor still produces fault.
Video Card Cable: miniDP to DP cable provided with monitor. HDMI cable, tested with alternate monitor to confirm it functions correctly.
Monitor Menu Button: Non responsive, when power is turned on the computer successfully detects the Dell P2415Q monitor, the backlight turns on but no image appear on the screen. Pressing the menu buttons yields no result - menu does not appear on the screen. Power LED is on.
Monitor Purchase: Purchased from Overclockers.co.uk March 2015.

* Turn the monitor off
* Disconnect all cables from the monitor including the power cable
* Press the monitor power button in for 15 seconds
* Reconnect the monitor cables and re-test. If still no go, your only option is to get it exchanged per the purchased warranty
* But first the service tag must be transferred into your name using this form

Java7 and Java6 will not work opening pogo games on firefox, but works perfectly for IE, what can I do to fix this issue?

Java will not work on the computer all of a sudden. Now when I go to open a Pogo game room up i get a Mozilla red lego piece in the corner saying "Some plug ins have been De-activated for your safety, in the box will be "Java (TM) platform SE 6 U". I have removed Java7 and reloaded it, after that not working found Java6 and loaded and reloaded it and it is not working.
Now after 3 minutes of the room not loading Pogo will give me the error message of
Java Not Found or Not Working
Explanation:
This error means Java (one of the technologies built into most browsers) is not working correctly on your browser.
You must have Java installed on your computer in order to run Pogo games, and it must be functioning properly. Either you don't have Java installed yet, or the Web browser you're currently using doesn't support Java or you have Java (or Javascript) disabled in your browser.
How to Fix the Problem:
Java is a free download that is required to play Pogo games. Not all computers come with Java pre-installed.
If you haven't played Pogo games before and are getting this error, you probably just need to install Java on your computer.
For instructions on installing Java for your operating system and browser click here.
If you believe Java might be installed but disabled for your browser, please be sure to enable the plugin for your browser. If you need help, click here.
If you already have Java installed and it is not disabled, your Java may be out-of-date or no longer working. In that case, your Java might need to be upgraded or reinstalled. If you need help, click here.
I have done the click here in last sentence and all it wants me to do is download Java7 which was the first reason it was not working.
Hopefully I have explained this well enough, from Mozilla this is what I get BUT if I go to Internet Explorer (which I HATE) the Java6 and Java7 work perfectly fine. So apparently the Java is downloaded correctly I just can not get it to play nicely with Mozilla and that is my main goal.
EA games help page has gone through it all with me and have proven over and over (after 1 hour sessions, 45 waits for them) Java is working on my computer perfectly with IE just not on Firefox and with the rural situation I have become dependent on Mozilla because of the no fiber optics here it has been my best and only source of successfully using the internet here in the far out part of the country.

Thank you so much, for once in my computer life I knew what the problem was, what caused it, why it was caused, what it did, what it made it do and most importantly how to fix it and to do it correctly and expeditiously. I can not Thank You all enough for all of the help! I also have Pogo mailed this to all on my friends list, where they have all learned as I have and have fixed theirs also. and the message is being spread. Thank You again, I just can not say it enough.

Iphone 5 fallen in water drained for around 20 secs, kept in rice bag for 2 days, worked perfectly for 6 hrs! now it shows to restore, after restoring during activation it says unknown device contact apple care.

hello, i have an iphone 5 it just fell into water and was in there for around 20seconds. I've seen on many of websites saying to keep it in a rice bag for 48 hours nd said it may work so i've done the same. I took out my phone from dat rice bag yesterday which worked perfectly alright for 6 hours and then switched off automatically! when i connected it to itunes it detected as a recovery device which after recovery during activation it shows as an unknown device! been working on it soo long! i live in mauritius here i have no official apple store but my phone is still under warranty. Please help me!!

When your phone was exposed to water, your warranty/support was voided, so you no longer have any warranty. An out of warranty exchange, from Apple, is US $269. Call AppleCare or whoever handles support where you live.

LR 4.4.1 crashing on iMac osx 10.8.5 when using exposure and shadows sliders. Will not restart with out resetting surge protector. Worked perfectly for 1.5 years with upgrades to 4.4

Hello,
Thanks for any help you may have. LR 4.4 worked perfectly on iMac 27' OSX 10.8.5 for 1.5 years until October this year when shut downs began when making adjustments on primarily exposure and shadow sliders. Unit would not restart unless rebooting surge protector(s) after 10-15 minute wait. Apple replaced main board and cleared disc. Back-up and LR 4 reloaded and updated to 4.4.1. New surge protection or direct into receptacle makes no difference and shutdown happens immediately upon slider movement. Any suggestions or self checks an old guy can possibly do? It is Educator/student version.

Hello and thanks for the reply.
The entire computer shuts down and will not restart without a reset of the new (and previous) surge protector or if plugged directly to the wall receptacle anywhere from 30 minute to overnight reset before on button restart will work. Other than slider adjustments on LR, it has only shut down one other time when loading photos via USB 3.0 cable to LR. All images from camera are in RAW. Apple tried to replicate this earlier this week with LR but could not read anything other than an increased usage on one of the diagnostic meters when the sliders were moved quickly from side to side.
Other computer functions are normal and rarely used except for e-mail, web search, and 90% LR. Plenty of memory in reserve.
Considering two upgrades (1) LR 5 to get new camera profiles (Pentax K-3)
(2)Yosemite OSX if it would help the LR4.4 or LR5 actually behave
Hope this helps illustrate the dilemma and thanks for your support.

TS2538 This worked perfect for me, thank you so much for posting this.

My Mac Mail time and the time displayed on my desktop wasn't synced. After applying these steps it has all been sorted out and working perfectly. Thanks so much for posting this.

Great to hear, thanks for the post/tip!

My e mail functionality doesnt work any longer on my 3gs phone. has worked perfectly for 18 months...now i just get a blank screen when i click on the mail icon...it still tells me how many mails I have waiting on the icon...any ideas?

my mail has been working perfectly on my 3gs iphone. I can now longer access the mail after tapping on the mail icon. All i get is a blank screen with a reload icon and a write icon at the bottom, neither of which responds when touched. The icon continues to tell me how many mails I have in my inbox and continues to update.
Any ideas?
am on version 4.3.4 operating system.
Thanks

I have tried that also, but its still doing the same thing

Maps works perfect for me

Similar Messages

Maybe you are looking for