Marketing Calendar - Query Details Section

Hello All,
In the Marketing Calendar you can configure your own searches.
When you go to the Query Definition view in Marketing Calendar there is a 'Find' dropdown list.
In our system there are three options.
1. CP Campaign
2. DL Deal
3. TP Trade Promotion
According to the documentation in SPRO there should also be MP Marketing Plan but this does not show in the Find list.
Can anyone tell me how I can make this appear?
Many thanks
David

Hi
After defining and assigning the search criteria for marketing calender you need to Assign Graphic Profile for Marketing Calendar in spro and Define Views for Marketing Calendar
Save the Query in the Advance search in marketing planner by giving some name as You will be able to see the dropdown list with all the querys you define in the marketing calender show field to selet the Query for search along with view. You can select any of the values from the view field as per your requirement for searching the marketing plans and campaigns according to the query you have defined in the advance search
pl reward points if helpful
Regards
Vikas

Similar Messages

I need two query in one report (two detail section in one query)

Hi master sorry for again distribute
Sir I need two query in one report
Because I need two detail section in my one report
Such as
Master
Vno=9088989
Detail          1
=
=
==
=
Total                     99999
Detail          2
=
=
==
=
Total                     33333
Sir how I get this type of report
Please give me idea
Thanking you
Aamir

I want to see the report as follow.
d_name: CPU-1
date: -----------
Software installed:
sw_id, software, version, serial_no, sw_type
(list of softwares attached, can be more then one)
Hardware attached:
hw_id, hardware, specification (same like software list, it will contain hardware list attached to specific device),
Please if you can help me that how will i make a query for this.
Thanks and Regards
Maz

CRM Marketing Calendar

Hi SAP Guru's
Can anyone please help me by telling how to use a marketing calendar, I have created the campaign but m not able to configure the channel for the e-mail support.
If anyone can help me with end user and config documents it would be very helpful.
U can mail me at [email protected]
Thanking in anticipation.
Regards,
Amit

Hi Johnny,
Thank you for replying to my query, I am aware of this link but could not figure out where to find the relevant info. If you can point out which section to browse, then i would do the rest. I know asking for the documents is not allowed on the forum but had to do it, an urgent requirement needs to be addressed.
thanks once again.
Regards,
Amit

Unrelated data in master detail sections of a custom BIP report deployed in R12 EBS

We have a custom Master Detail BIP report generated by calling XDO APIs from a custom Java concurrent program (common_report_attachment) . This Java concurrent program is called from another custom concurrent program (po_validation) that processes a batch of POs in a single concurrent request.
PO_Validation Program (processes a batch of POs per request) -> Java Concurrent Program -> BI Publisher Report APIs
BIP report generates data for master detail sections based on two sql queries (given below) that have 'where' clause based on a common external parameter "P_TRX_HDR_ID".
NOTE: No explicit data link is used NOR an output column of parent query is used in the where clause of detail query as bind parameter.
- <dataTemplate name="NAPPB2BPORPT" description="Data Template for B2B PO Report" version="1.0">
- <properties>
<property name="xml_tag_case" value="upper" />
<property name="db_fetch_size" value="200" />
<property name="scalable_mode" value="on" />
</properties>
- <parameters>
<parameter name="P_TRX_HDR_ID" dataType="number" />
</parameters>
- <dataQuery>
- <sqlStatement name="Q_PO_HDR">
- <![CDATA[
SELECT poh.po_number PO_NUMBER
 , poh.quote_number QUOTE_NUMBER
 ---- other columns -----
 FROM nappcust.napp_o2i_po_headers poh
 ,napp_aso_quote_headers_v naqv
 WHERE 1=1
 AND naqv.quote_number=poh.quote_number
 AND poh.header_id = :P_TRX_HDR_ID
]]>
</sqlStatement>
- <sqlStatement name="Q_LINES">
- <![CDATA[
SELECT pol.item ITEM
 , pol.partner_part_number PARTNER_PART_NUMBER
 -- other columns --
 FROM napp_o2i_po_lines pol
 , napp_o2i_po_headers poh
 , aso_quote_lines_all aqla
 , mtl_system_items_b msib
WHERE 1=1
AND poh.header_id = pol.header_id
AND pol.header_id = :P_TRX_HDR_ID
AND aqla.quote_header_id = poh.QUOTE_HEADER_ID
AND msib.inventory_item_id = aqla.inventory_item_id
AND msib.organization_id = aqla.organization_id
AND (pol.quote_line_number = aqla.quote_line_id
 OR pol.quote_line_number = aqla.quote_line_id||1)
]]>
-- Added for the defect 13954
</sqlStatement>
</dataQuery>
- <dataStructure>
- <group name="G_PO_HDR" source="Q_PO_HDR">
<element name="PO_NUMBER" value="PO_NUMBER" />
<element name="QUOTE_NUMBER" value="QUOTE_NUMBER" />
--- mappings for other columns of "Q_PO_HDR"
- <group name="G_LINES" source="Q_LINES">
<element name="ITEM" value="ITEM" />
<element name="PARTNER_PART_NUMBER" value="PARTNER_PART_NUMBER" />
 --- mappings for other columns of "Q_LINES"
</group>
</group>
</dataStructure>
</dataTemplate>
Issue: Sometimes when the parent concurrent request runs for a batch with multiple POs the report generated for the last PO has inconsistent data in the master and detail sections. To elaborate, the detail section is having correct data pertaining to the PO identified by the parameter "P_TRX_HDR_ID". However, the master section is having data pertaining to the previous PO processed from the same batch.
This issue is not occurring consistently and is not reproducible at will. I
'm suspecting this could be because of not having data link between the queries but confirm from someone who has experienced this issue.
Regards,
Srinath

is there any way from the page, can we pass the some values, which can identify the page level data?
if so pass the parameter to BIP report query.

Marketing calendar

Hi all,
i have 2 problem with the marketing calendar in PCUI.
1) If I were to click on the Marketing Calendar tab, I am not able to see anything except for My Favorites in the Show dropdown menu.
But if I create a campaign, and then click on the Go To button and click on Marketing Calendar, then can I only see 2 options in the Show dropdown menu. One is My favourites and the other one is my own saved query.
My question here is, why is this the case? When i click on the Marketing Calendar tab, I do not see my saved query im the Show dropdown list?
2)Also I had assigned colours to the various statuses of the campaign, but they appear to be grayed out. I can see the start date and end date but I can't see the the colour status for the campaign that i had created. Why is this happening?
So are there any config or did i miss out any steps? Please help guide me ...

Hey Gregor,
Thanxs for the reply.
But the start date and end date are not the same.
I could see the list of Campaigns on the left hand side but the bars for the respective campaigns are not present.
Hence I am not able to extend the campaigns or copy the campaigns etc

Marketing Calendar IView Problem - CRM 4.0 6.2.3

Our current environment is a NW04 portal instance. We downloaded the CRM 4.0 6.2.3 and imported the content. We have also set up a system and enabled the content to connect and expose information from the back end CRM application (4.0)
We have been working with the campaign manager role and its associated pages and views and have run into an issue with the marketing calendar iView. All other content exposed from CRM is working as expected and do not have any issues. On further investigation it looks like the iView is driven off a custom Java iView that is delivered in the par file - com.sap.pct.crm.mkt.calendar.par. We have also applied the support pack that has been provided but still have an issue with the iView.
There is also no special setup process mentioned for this iView and looks like we may have issues with the par file.

Hi
i have installed Business Package for CRM on EP6.0 SP12, and I assigned campaing manager role and when i login with that user name, The following error is displayed..but all the other pages in that workset are working fine...
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.portal.migrated/ep_5.0/roles/com.sap.pct.crm.CampaignManager/Management/Calendar/com.sap.pct.crm.mkt.Calendar
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
would just like to know, it this is the same error what u have seen and how did u rectify.please help me in this regard.
Thank you
BTW, i checked console_logs, default.srvr.trc.1 but i dont find any info there.. is there some otherlog file that i should check with..please let me know...

Missing records in Details section

Post Author: seeni
CA Forum: Deployment
Hi,
I've developed a report that shows some data in the details section. It works fine in my development pc.
When deployed at the testing server it fails to show all the recors. for ex: if the query returned 15 records it only shows 2. But when i ran the same report in my development machine it works fine and displays all the 15 reocrds.
I'm using sql server 2005, CR ver 11.5.0.313.
For development and testing i'm using different machine installed with sql server of same version (2005).
Any idea abt the fix.
Thanks
Seeni

If you have the professional version of LabVIEW, select New... and then expand the Other Document Types in the create new window.

Displaying Marketing Plan / Plan Elements in Marketing Calendar

Hi,
I am unable to view the Marketing Plan and Marketing Plan elements in the Marketing Calendar.
I am query and see the Campaigns though.
Can someone please let me know, what settings i need to do.
Points will be rewarded.
Thanks,
Kedar

Hi
Do the following customiseing settings for Marketing calender.
Define search criteria
Assign Search Criteria
Assign Graphic Profile for Marketing Calendar
marketing calender in PCUI
Define Views for Marketing Calendar
You can use marketing plan and campaign to create from marketing calender dropdown values in pcui in GUI as well when you select marketing plan you will get graphical bar to select double click on it will take you through marketing planner where you define marekting plan and you can change the dates usering the graphical bar by dragging as per date option you can set colours as per your marketing and campaign types as well.
also apply snotes if you are working on CRM 5.0
Note 941526 PCUI calendar. With related notes 948988 Marketing Calendar does not print in its entirety ,
Reward points if helpful
Regards
Dinaker vikas K

Cross Tab report in details section

Hi All
I am new to Crystal Reports and have a few queries related to a cross tab report. I am trying to design a report as follows
Rows: Cost elements
Columns: 12 months,YTD and Total Year for Actuals & then 12 months,YTD and Total Year for Budgets
Gruop By: Cost Centre
For Example;
Actual Budgets
Apr May June July.....YTD FY2010 Apr May June July.....YTD FY2010
Manpower Cost
Rent
Total Cost
1. Since I need the above table for every individual cost centre, is it possible to group by Cost centre and then build a cross tab report in the details section?
2. If not, is there any other way by which I can create the above table without using cross tab?
3. For the YTD values, should it be calculated in the BW query (I am using BW queries as the datasource) or in Crystal Reports? and how?
Thank you very much. I would appreciate your early response.
Payal

Hi
Thanks for your inputs. Currently I have designed my report in the same way (group by cost centre & cross tab in group header section). However, I am still looking for a way to calculate YTD & Quarter values in Crystal using a formula. I am debating whether it should be calculated in BW or in Crystal.
Thanks
Payal

Details section repeating same data

I have created a report using Crystal Reports 2008 that uses a group. The details section of the group is repeating the data 11 times when it should only print it out once, before moving on to the next group.
When I copy the SQL query out of Crystal into SQL server the query only returns the info once for each group so why is the report printing it out 11 times for each group?
How can I fix this.

Check whether you have any joins between the tables. Also first try to place the fields from only one table and check when the values start repeating by placing the fields from each table.
Regards,
Raghavendra

'Show Related Projects' in Marketing Calendar

Hi,
Does anyone know what the 'Show Related Projects' button in the Marketing Calendar is supposed to do? I was hoping that when selecting a Marketing Plan, clicking 'Show Related Projects' would results in an overview of all related campaigns to the selected Marketing Plan, but unfortunaly that doesn't seem to work. Does any one know what the exact purpose of this button is and how to configure it (if possible)?
Thanks,
Jeroen

Hi Jeroen,
Under Queries you can set a query to be executed that shows the related trade promotions or campaigns.
When we talk of "related marketing projects", this is in the sense that they have the same products assigned to them. This query allows you to restrict the amount of related projects you see. For example, you could define a query to only show you those related projects within a certain sales area or those that are of a certain campaign type. The queries you define here are user-dependent.
Hope it is clear.
Don't fail to appreciate helpful answers with reward points!!!
Thanks.
Sindhu.

Set Range Start for Detail Section of advanced table

Hi All
I have the following requirement :
My page is a search page and the results region has a master-detail section which is implemented using a view link. Now in the detail section, there is an icon on which a PPR has been implemented and it navigates to a new page. Once we come back to this page, we are not retaining the AM due to some technical reasons.
Now when the page is displayed, we are re-querying and showing the results to the user. Before navigation, we are storing rangestart for the master section in a session variable and are able to assign it back.
Problem :
If the detail section has about 50 rows and the user has navigated to the 30th row using the naviagtion bar of the detail section, how do we assign it back for each master row once we come back to this screen?
Regards
Sriram

What is the source of your import? If your camera is attached, or if you copied s camera's card to your Mac or if you made a camera archive, Final Cut will see the file as a camera and you should be able to make elections in the import preview window - by using keyboard shortcuts, or the Range tool.,
Russ

Marketing Calendar on the PCUI

Hello all,
We have this problem with the Marketing Calendar on the PCUI. When we click on the marketing plan/project in the calendar its not going in to the planner showing all the details about them. I don't understand what is the problem. Any help?
Janaki

Russell,
You can call me any which way you want :). Anyways coming to answering your question we made use of the SAP Notes that were available on the Service Marketplace.
The notes that you have to refer to are:
1. SAP Note 906318 and
2. SAP Note 919964
I found these notes and forwarded them to our CRM Techie and he took care of the rest like implementing this notes etc. I just happened to ping on him and he said that the 2nd one served our purpose.
All the best
Janaki

Edit box length size problem...at Detail Section.

hi.
Plz have a look on below image.
This is my problem.
in details section i put one edit box... like below..
the data is comming from data base..
Header 1
but the size of the filed is more than the size of the Edit box..
i all ready checked can grow option in format field common properties.
but horizontal line is not adjusting ....
what should i do...

Hi Srini,
You can't place another object directly below an object that 'grows'.
Create another section and move the line to this new section.
-Abhilash

How to combine multiple Details section rows in my report

Hello,
I am currently creating a report which will display employee details, which includes first name, last name, home phone, cell phone and Email.
I get my First Name and Last name from the "Employees" table but all other info is situated in the "CommunicationLinks" table.
The tricky part which I am having issues with is the Home Phone, Cell Phone and Email are all under the same field in this table, the field is called "DisplayAs".
These 2 tables are linked together by taking Employees.LinkID and linking it to CommunicationLinks.LinkIDParent, which are matching linkids.
The only issue that I have, is for example, if you look at the screenshot provided, I have 5 details section that gets populated for the same employee.
How can I combine all these 5 records to only one?
The homephone, cellphone and email field have formulas created for them, the formula is as follow.
This example below is for the HomePhone field, the others have different type assigned to them
If {CommunicationLinks.Type} =1 then
{CommunicationLinks.DisplayAs}
else ""
Homephone, Cellphone and Email are all different types but uses the same field "DisplayAs".
I also tried creating a subreport for each of these fields but seems to give me the same results.
Any help would be really appreciated.
If you have any other questions please let me know. See attached screenshots for reference.
Thank you in advanced.
Jocelyn

Easier way without working in SQL:
1. Group by a field that is unique to the employee.
2. Suppress the employee group header and the details sections.
3. Create a couple of formulas:
{@ClearVariables}
WhilePrintingRecords;
StringVar HomePhone := "";
StringVar CellPhone :="";
StringVar Email := "";
Put this formula in the employee group header - even though the section is suppressed, it will evaluate.
{@SetVariables}
WhilePrintingRecords;
StringVar HomePhone;
StringVar CellPhone;
StringVar Email;
if {CommunicationLinks.Type} =1 then
HomePhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for cell> then
CellPhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for email> then
Email := "";
Put this formula in the details section - it will evaluate even though the section is suppressed.
{@HomePhone}
WhilePrintingRecords;
StringVar HomePhone
(Do the same for Cell Phone and Email. Note that there is no semi-colon at the end of this one!)
Put these formulas and all of the rest of the employee data in one or more Employee group footer sections.
-Dell

Marketing Calendar - Query Details Section

Similar Messages

Maybe you are looking for