Marketing campaign - pls help

Hi all,
Can anyone tell me how to create an Infoset Data Source through ICWbclient ?
Regrads,
Aravind G.

Thanks for your reply Dipesh..
I am able to create Infosets using SQ02 . But i want to create them thru Webclient. I am also able to create Attribute sets thru webclient , but not Infosets. I used Marketing Pro Business role.
Regards,
Aravind.

Similar Messages

  • Can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

    can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

    Java is no longer included in Mac OS X by default. If you want Java, you will have to install it.
    However, note that you should think twice before installing Java for such a trivial need as looking at stock market quotes. There are other ways to get that information that don't involve Java, and using Java in your web browser is a HUGE security risk right now. Java has been vulnerable to attack almost constantly for the last year, and has become a very popular, frequently used method for getting malware installed via "drive-by downloads." You really, truly don't want to be using it. See:
    Java is vulnerable… Again?!
    http://java-0day.com

  • How to assign status profile to marketing campaign ?

    Dear Friends,
    I am working on Marketing Campaign (SAP CRM 4.0) : I want to customize a new status profile for campaign. I create a new one and I don't know where I assign it to camapign : I searched in SDN and I found a message : "to assign status profile, you have to do when you customize campaign type : Marketing -> Marketing Planning and Campaign Management -> Basic Data -> Define Campaign Types/Objectives/Tactics : in this customizing point, when you define campaign type, here is a status profile field".
    The problem is I did not find any "status profile" field in this customizing point.
    Thanks in advance for your help.

    Hi,
    Pls follow below said path to create User Status profile
    CRM--> Marketing > Marketing Planning and Campaign Management> General Setting --> Change Status Profile for User Status
    Once you create Status profile you can see the same in the profile field of Campaign. You will have to assign this profile in the campaign then you can see the statusses in Change Status field,. But these stausses can not over write the system statusses.
    Hope this will help..
    Rgds
    Mallikarjun

  • Really aggressive marketing campaign for creative cloud

    today my Lightroom informed me that there is an update, and asked me if I would like to download the update. I answered "yes" and was taken to the Adobe website. But, instead of being taken to the Adobe Lightroom download page as has happened with all of the previous updates, this time I was taken to a page about creative cloud. I don't want creative cloud. I only want to update my desktop version. So I tried clicking on the way for the desktop version, which is hidden away down in the bottom right corner of the screen. And that takes me to create a cloud. So I tried going to downloads for Lightroom. And I get taken to creative cloud.
    I eventually had to call up Adobe on the phone in order to be able to update my desktop version of Lightroom. I let the agent I spoke with know it was very annoying to be subject to this obviously aggressive marketing campaign for creative cloud. When we were done with the call I thanked him for helping me do on the phone what I couldn't do on the website.  I also let him know that  it seems like Adobe is trying very hard to steer people to be creative cloud option and away from the desktop option.  I also let him know that if Adobe ever does away with the desktop version and the creative cloud version is the only alternative I am gone as a customer. I will use Apple photos or some other product. I will not be forced into a subscription-based service against my will.
    Greg

    Have followed up with the customer via email. Working to resolve the problem.

  • Generate Sales Orders in mass based on Marketing Campaign (CRM 6.0)

    Hi Support,
    I want to generate sales orders in mass through marketing campaign
    I have done the following customizing :
    - create a new transaction type used for the Template : sales order template ZSOT and assign to it template type "D"
    - assign item categories to this new transaction type ZSOT
    - enter as communication medium for the channel : the sales order ZSOM that I want to be created in mass (based on the Template)
    - copy control between the 2 transactions : ZSOT and ZSOM
    - copy control between the item categories
    - Then I create in the Web Client UI, a sales order template ZSOT with material and quantity
    - Then I create a marketing campaign and choose as communication medium the sales order and assign the sales order template ZSOT previously created
    - I assign a Target Group to the Campaign
    - I release the campaign
    - I start it to execute it
    => I obtain the message : "To generate sales orders products and quantities have to be assigned."
    However the Sales Order Template contains a product and a product quantity
    Any idea how to solve the issue ? Is there any step missing on my customizing
    Thanks for your help !

    Dear Thomas,
    I have the same problem which you have explained in your thread and i have done the same settings that are mentioned by you.
    Even i have tried all the possibilities to get rid of this error but i am unable to resolve this problem.
    As per your inputs i have inputted the product in a Campaign but there is no option for entering quantity.
    The error i am repeatedly getting is "*To generate sales orders products and quantities have to be assigned* upon executing the campaign.
    I appreciate your earliest reply.
    Many many thanks in advance.
    Rajendra

  • Pls help! USB Storage Devices does not work for K7N2 Delta-L

    hi all,
        I am pulling my hair out trying to resolve this issue.
        Everytime i plug in a USB Storage Device/Thumb Drive(eg Creative NOMAD), my system gives an error saying task cannot be performed due to a I/O device error.
        Yet, the USB ports work well with other USB devices like mouse, keyboard, USB sound cards, printers and so forth??!!
         I am using WinXP SP1 and have installed the patch that comes on the CD driver. Pls help me out if you know the answer. ...
    Thanks!
    Les

    I'm pretty much going to confirm the same going with compatibility issues here...there is still alot of hardware out there on the market that is incompatible with many other types of hardware...
    We've reached the day when alot of us like to think that ALL manufacturer devices should work flawlessly with everyone else's devices on the market. This just isn't the case and I don't ever see this being the case. Ideally it would be nice but the fact is is that no company can "cover all the bases" in this respect. There are literally hundreds of thousands of hardware mfg's out there now and this cannot be a reality unless the PC world goes Apple. Same standards for all period. No fluctuation or ability to expand on new ideas without going to the "Standard Setting Company" directly for full testing capability.
    Regardless of that fact, I'm kinda surprised that you can't get this device to work on your rig. Have you tried a fresh install of XP? Have you tried using a PCI USB device to see if the MB ports are bad? Could be that the MB has a problem that doesn't show until you use that device...many things to try here to troubleshoot your problem.
    Bonz 8)

  • Tables for Marketing Campaign

    Hi experts!
    I'm using CRM 7.0.
    I'm looking for the table for Marketing Campaign where I can find the assignment of Survey (name or GUID) to the Campaign (name or GUID).
    It would be great to find the common table of Marketing Campaign values.
    <<Text removed>>
    Thanks!
    Kostya
    Edited by: Matt on Oct 28, 2010 9:47 PM

    Hi Kostya,
    I'm not working with CRM actually but I think you can get the campaing GUID and select the table CRMD_LINK. Did you try that? After this you can check the return of CRMD_LINK in the survey table.
    Hope this helps.
    Best regards,
    Caíque Escaler

  • What are some of your best practices for using videos in your marketing campaigns?

    As video becomes more and more popular, what are some best practices you have for effectively using video in your marketing campaigns? Any cool examples?

    Just saw this topic.
    We use video a great deal in our campaigns.  One of our best ones though was for an offering that the written word couldn't convey as quickly, succinctly, or visually even with graphics that a short commercial could do.  We therefore created a simple video with professional VO work and blasted it out via email and social networks.  The video clearly communicated our product and it's value to our prospects.
    In return we got a enormous response of form submits from individuals wanting to download the products overview documentation.  It is still one of our most watched videos.
    We are now looking at adding in more value-add videos to go along with the current 'product information' stable to help generate more soft-sell opptys.
    We are firm believers in using video.  You can't just put anything out there and expect just because it is a video to do well.  You must plan it carefully, think the messaging and value offered through just as much as any outbound offering.  Time is still valuable and your prospects are always asking what's in it for me.  Once they get something that they believe wastes their time, they will be more skeptical in the future regarding your videos or any messaging.
    Keeping trust and relevance is essential to generating value with video.

  • Interactive Reports for Marketing Campaigns using HANA

    Dear Experts,
    We are Implementing Interactive Reports for Marketing Campaigns using HANA Hence, I request you all to help with the Config Steps  / any documents that help.
    Your Help is really appreciated.
    Thanks In advance
    Satish

    David,
    There are several drawbacks with the standard functionality that you will encounter:
    -  SAPconnect only supports HTTP url posting or RFC destination setup (which means you need a third party server program)
    -  The mail forms do not impose a limitation on the length of messages
    -  Target groups do not check if the person has a mobile number.
    If you look at SMS gateway providers they normally allow use via web service or SMPP.  If you plan on doing "bulk" campaigns where you will generate multi-thousand messages a month then you need to use one of these options.  SMPP is a binary protocol that is way too complicated for a business application to implement.  So web services is your best bet.
    If we used mostly standard CRM functionaliy we would do the following for SMS:
    -  Use the segment builder to handle our target groups
    -  Use the personalized mail functionality
    -  Use the open channel exits for segment execution to handle the communication to SMS gateway.
    Now keep in mind that for SMS campaigns this is going to be cubersome, and not going to provide all the mobile marketing functionality you need.  It still appears that even for CRM 52/2007 that mobile marketing is not really fully addressed in the solution with several major gaps.
    We ended up going down a custom route, because the segment builder was not-user friendly and unstable in CRM 40 and the mail form technology did not meet our needs for sending messages and creating template based scenarios.  We still make use of the CRM business partner master for the distribution.
    If you have any further questions on doing SMS campaigns with CRM, please let me know.  This is one area where I have spent some extensive research.  If you are looking for SMS gateway providers in the US, I can also provide some names based on our previous research.
    Thank you,
    Stephen

  • Marketing Campaigns not shown in Account factsheet

    Hi All,
    I am posting this thread after going through a similar kind of issue posted by Shiva a year back but that thread is closed now without giving the proper resolution. I apologize if this is against the rules of forum, but would like to request the moderator to encourage members to put the proper solution before closing the thread so that it ll help others in future.
    The issue what i am facing is after executing a campaign, the Marketing Campaign data is not available under the assignment block in Account Fact Sheet.
    As this is a standard functionality of SAP for Fact Sheet, i am not sure if this is a product error or am i just missing some configuration somewhere..
    Kindly guide me what to do to resolute the prob.
    Cheers!!!!
    Ajay

    Hi Ajay,
    I think the reason for this is that there is no direct relationship between the Business Partner and the Campaign. Only one Business Partner has a direct relationship to the Campaign (the Resp. Employee). All Business Partners included in the Campaign (as Member of the Campaign) are not directly related to the Campaign. These BPs are just included in a Marketing Profile/Target Group. Itu2019s the Target Group which is assigned to the Campaign at the end.
    Best regards,
    Arno

  • Surveys in Marketing Campaigns

    Hi All
    When we send out surveys in Marketing Campaigns, we can insert tracking for tracking responses.
    How can we just track that how many BPs opened the survey. Means they clicked on the link ...irrespective of how many did actually respond. Just the BPs who clicked and opened the email.
    How to track it and which table to see for the enteries.
    Please help
    Thanks and Regards
    Mohanpreet

    Hello Joost,
    the only thing I know is the following:
    If you want to classify responses that you capture when executing campaigns, an administrator can create response options that can be assigned to campaigns. A response option can have a positive, negative, or neutral classification.
    With the classification you can select, for example, all positive activities in reporting.
    When a campaign is assigned to an activity, there’s a check, whether response options are assigned to this campaign.
    If there is a default response option, this default will be shown in the newly created activity. You can change the response to another option assigned to the campaign afterwards.
    Note: Currently there is reporting and user interface selection based on the response option. For leads and
    opportunities we assume to have already a positive feedback. Otherwise we would not have such an object.
    Response options can only live with a campaign. When you set a response option to Obsolete, you will not see it anymore in the value help and you can't assign it to campaigns.
    Source: Administrator Guide on page 315.
    Best regards, Janina

  • How do I trigger an email marketing campaign each time a customer orders?

    I want to trigger an email campaign to be sent X days after a customer places an order, each time he/she places an order. Specifically this would be a request for the customer to review the product(s) he/she purchased. I can't seem to find a way to trigger this based on the order date. Please help! Thanks!

    Hi Liam,
    Thanks for the response. I should clarify my initial question. There are two groups of purchasers that I would like to target with different email marketing campaigns: First time purchasers and, (ii) Repeat purchasers. Ideally the system would be able to distinguish between these two groups during the checkout process so that the correct email campaign could be triggered. I thought about basing it on whether the purchaser was logged in or not (where 'logged in = repeat purchaser'), but our site asks visitors to register very early in the process, so conceivably, a logged in user may very likely be a first time purchaser.
    The more I think about it, the more it looks like I will need to manual email marketing list segmentation and management.
    I sincerely appreciate any ideas you might have.
    Thanks again!
    Tim Rayl

  • Relation between marketing campaign and product ID?

    hi,
    1. I need the relation b/w marketing campaign (external ID) and Product ID.

    Hi Sheen
    I'm not sure if I understand your question.
    If you wish to view Marketing Attributes linked to a Business Partner use Transaction BP locate the relevant BP then click on the Marketing Attributes Tab.
    Marketing Attributes are linked to Set Types.
    Hope this helps
    Regards
    Arden

  • Marketing Campaigns using SMS

    Hi,
    Has anyone ever configured CRM to use SMS for Marketing campaigns?
    Is there any useful documentation on it?
    I have the best practice guides but there is no mention of how to do this.
    Any help/advice appreciated.
    David

    David,
    There are several drawbacks with the standard functionality that you will encounter:
    -  SAPconnect only supports HTTP url posting or RFC destination setup (which means you need a third party server program)
    -  The mail forms do not impose a limitation on the length of messages
    -  Target groups do not check if the person has a mobile number.
    If you look at SMS gateway providers they normally allow use via web service or SMPP.  If you plan on doing "bulk" campaigns where you will generate multi-thousand messages a month then you need to use one of these options.  SMPP is a binary protocol that is way too complicated for a business application to implement.  So web services is your best bet.
    If we used mostly standard CRM functionaliy we would do the following for SMS:
    -  Use the segment builder to handle our target groups
    -  Use the personalized mail functionality
    -  Use the open channel exits for segment execution to handle the communication to SMS gateway.
    Now keep in mind that for SMS campaigns this is going to be cubersome, and not going to provide all the mobile marketing functionality you need.  It still appears that even for CRM 52/2007 that mobile marketing is not really fully addressed in the solution with several major gaps.
    We ended up going down a custom route, because the segment builder was not-user friendly and unstable in CRM 40 and the mail form technology did not meet our needs for sending messages and creating template based scenarios.  We still make use of the CRM business partner master for the distribution.
    If you have any further questions on doing SMS campaigns with CRM, please let me know.  This is one area where I have spent some extensive research.  If you are looking for SMS gateway providers in the US, I can also provide some names based on our previous research.
    Thank you,
    Stephen

  • Mileage Reimbursement rate for car needs to be changed -Pls help!!

    Hello Gurus,
    Currently I am working for european end markets for T&E module.
    Iam facing a problem that:
    I need to change the mileage reimbursement rate has changed for Belgium.
    The mileage rate for Belgium needs to be changed for comp codes (BL01 and BL02) the new rate needs to be 0.2940eur/KM for own car mileage claims.
    Since, i am new to payroll area, can some one pls help me.. where we track such changes? Is it done under payroll?
    Pls advice for same...
    Points assured
    Thanks & regds,
    N.babu

    Hello Karthi,
    I want to change the mileage rate for own cars for Belgium. It is for personnel area BL01 & BL02.
    <b>The new rate has been changed to be 0.2940eur/KM for own car mileage claims.</b>
    This will ensure that employees are being reimbursed the correct amount for their mileage cost when using their own car and travelling for business purposes
    Hence I want to know, is there any settings we need to maintain in payroll?
    Regds,
    N babu

Maybe you are looking for