Mass Qualification Transfer during LSO Course Follow Up

Dear all,
May I confirm if mass change of qualification proficiency during a course follow up is possible? I've noticed that I cannot change the proficiency value in the mass change dialog.
I am using ERP6 EHP7 Stack 04
Thanks,
Steven.

Hi Stephen, check your follow-up settings for the appropriate delivery method, via IMG: Training & Event Management > SAP Learning Solution > Recurring Activities > Follow-Up > Control of Process Steps (table V_LSOFUPROCESS) and then have a look at the appropriate delivery method. Ensure that the "Process" selected for the appropriate "initial" setting is "D - Follow Up Participation (with Proficiency Change)" and "F - Follow Up Pass Result (with Proficiency Change)." Those settings controll whether or not you're able to change the proficiency of the qualification earned by completion of the learning activity.
Also, take a look at the relationship on the related course type D-A028-Q (course type imparts qualification) has a proficiency set against it in the master data of the course type. From your screenshot above it looks like no proficiency was set for this relationship.
Good luck!
Connie

Similar Messages

Learning Solutions (LSO) - Course Follow-Up

After firmly booking the course, follow-up screen is in display mode. I am not able to select pass/fail/reason for fail on the follow-up screen. Also, qualifications are not getting transferred to the participants (IT0024), after follow-up is done.

Hi !
Please go to
SPRO>training & event management> SAP learning Solution.> training Management>recurring Activities>Follow-up>Control of Process Steps
and check the following entries are activated (For delivery method - classroom training)
Classroom Training     Back End     A     Confirm Participation
Classroom Training     Back End     B     Rate Participation
Classroom Training     Back End     C     Follow Up Participation (Without Proficiency Change)
Classroom Training     Back End     D     Follow Up Participation (with Proficiency Change)
Classroom Training     Back End     I     Follow Up Course
Classroom Training     Back End     J     Historically Record Course
Classroom Training     Back End     K     Confirm Pass Result (Time-Independent)
if Delivery method is different please make the same entries for that delivery method
OR else check your authorisation status for follow-up.
Please let me know whether this solves your problem.
Anand

LSO - Course follow-up when participant was absent

Hi all,
Is there a config in IMG that I have to look at to have an automatic cancellation of a booking when following up a participant that was absent.
Currently, our system does not cancel participation as part of a course follow up when we rate the student as absent. Therefore, the course still shows up in that participants ESS portal under completed courses even though he did not attend.
Ideally, what I am looking for would be to automatically cancel the student with a reason code of absent.

Hi Steve,
Please check the IMG
Training & Event Managementl --> Employee Self Service >Business Ad Ins (BADIs) for ESS> BAdI: Set Up Customer-Specific Attendance Cancellation Reason
This will clarify your Query.
Regards,
JwaliniS

LSO - Course follow up

Hi,
In LSO_PV15 there are two fields namely 1) Participation confirmed (field = CONFIRMED) and 2) Course Passed (field= PASSED). I suppose the field 'Participation confirmed' refers to learners attended the course and the 'course passed' refers to the course test results (=Passed, failed or Not rated). In our organisation, for delivery method 'Classroom training' we do have test results so course pass/fail is not applicable. In the follow up screen the 'Rate participation' step is mandatory whithout which the course cannot be followed up. If I select the course pass as 'Not Rated' the follow up screen rasies an error message 'Unevaluated participant cannot be followed up'. Any ideas as to how to work around this?
The IMG documention says
Follow up participation (various options):
a) Follow up participation (no proficiency changes allowed) You can always follow up the participation, regardless of the participation rating (such as Passed, Not Passed).
Thanks,
Terence

Hi @Anbazhagan Natarajan : What is the table name ?
Anbazhagan Natarajan

Manage Course Follow up link SAP LSO

Dear Experts,
I have a query regarding the Manage Course Follow up link in the SAP Portal. I am using only Classroom training delivery method.
In this standard webdynpro application there are 6 steps to be followed to complete the follow up process:
1. Select Course
2. Confirm Attendance
3. Evaluate Participants
4. Transfer Qualifications
5. Review and Save
6. Complete
I have a requirement of only following the first, second and finally the last step. I need to skip the intermediate steps. So how can these be hidden and the screen displayes only the 3 steps required?
Can u please suggest how can i acheive this?
Thanks!!!

Hi Steve,
Please check the IMG
Training & Event Managementl --> Employee Self Service >Business Ad Ins (BADIs) for ESS> BAdI: Set Up Customer-Specific Attendance Cancellation Reason
This will clarify your Query.
Regards,
JwaliniS

LSO Portal - Course Follow-up Warning Message in Portal

Hi Gurus
When i try to do the course follow-up in portal , i get a warning message after i complete the attendance & course assessment of the participants and when roadmap status is at completed , i get a warning message on top of the roadmap that "Your Course Follow-Up could not be saved". This happens in the LSO portal from administrators role.
We have setup the right control options at course type level.
Please help with your inputs.
Regards
Reddi.

Hi Amit
I have checked the master data and found that everything is fine.
When i try to follow up from R/3 , i get a error message in the last step of follow up activity as "Error While data was intserted in the database".
Strangely this happens for the course which got over on 12-Aug-10 , but the same course which was on 13-Aug-10 , we were able to follow up the course from the portal without any errors.
I have checked the relationships , schedules, correspondence infotype etc , all the data items are maintained identical and all the participants are active in the system.
Am i missing something here.
Please help.
Reddi.

Course follow up out of order, incorrect Qualification dates

Hello,
I have a situation where courses followed up out of order results in qualifications with incorrect start and end dates.
Background
- Course Type imparts Qualification. Qualification is valid until 12/31/9999.
- Course Type has 3 courses (A = 1/1/2011, B = 2/1/2011, C = 3/1/2011)
- Person enrolls in each of the 3 courses
Scenario
- Course A is followed up. Person has Qualification for 1/1/2011-12/31/9999. Correct.
- Course C is followed up. Person now has Qualification for 1/1/2011-2/28/2011 and a new record for 3/1/2011-12/31/9999. Correct.
- Course B is followed up. Person now has Qualification for 1/1/2011-1/31/2011 and 2/1/2011-12/31/9999. No new record was created. Incorrect.
There should be a qualification entry for each course attempt.
- Course A should impart Qualification for 1/1/2011-1/31/2011
- Course B should impart Qualification for 2/1/2011-2/28/2011
- Course C should impart Qualification for 3/1/2011-12/31/9999
If Course C followed up again, the qualification dates are correct, but this is a manual process (i.e. admin needs to re-follow up all the later courses in order). Is there a programmatic way to ensure the qualification dates match the course dates when followed up out of order?
Thanks,
RM

I am very interested in this thread because I have encountered a similar problem with BLOB columns, except that I am also seeing this with CLOB's.
Essentially the all the data gets 'migrated', but the CLOB and BLOB columns are all mixed up!
Any solutions?

Selecting Not Rated value for Pass field during course follow up

Dear Experts,
We have some courses that are not assessed and as such there is no rating that can be attached to the participant. During course follow-up via LSO_PSV2, the Pass field does have the drop-down value 'Not Rated' but if we select it, the error message Unevaluated participation cannot be followed up appears.
Is there a way to make the Pass field optional? I've looked in the config at the Control of Process Steps but the only option is either Signature and Activate.
Any assistance is greatly appreciated.
Thank you
George

Facing the same issue on clicking on the check box for followup.
Did you manage to resolve this?
Unevaluated participation cannot be followed up

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

Add participant to a training course after course follow-up?

Scenario - training course (business event) has been completed and the 'follow-up' action has taken place. An additional course participant was found to have completed the training course and therefore needs to be added. I have added the additional participant to the course via the normal 'book' process in LSO_PSV1. However I cannot find a way to do the follow-up for the additional person - the fields are greyed out and am unable to mark the 'Confirmed', 'Passed' etc fields. Without completing the follow up for the additional person, the training course will not be recorded in their training history, and they will not receive the qualification associated with the course. Regards Paddy M

Hi Paddy
Though the fields are greyed out, select all functionality would allow you to change the values in the second screen. However, it could lead to changing the data of other employees since the system allows only to select all participants. Hence, i have suggested other solution :-).
Anyways, good to hear that your problem is solved for adding a participant to followed up course. Did you think about cancelling a participant from followed up course? in such case you may have to remove the imparted qualification automatically. FYI, you can use BADI LSO_CHECK_BOOKING with method cancellation for this purpose.
Hope this is useful.
Best Regards
Reddy

How to enhance DEBMDM06 to add custom segments and do mass message transf

Hi Team,
I have a requirement to transfer multiple IDocs(Customers) as a single IDoc to PI (Earlier XI) system. As I know this could be done by doing necessary config in ALE and execute the transaction MDM_CLNT_EXTR(MDMC specific to customer master day) by creating a variant with proper Extraction Object details. This works perfect with only standard idoc type DEBMDM05/06.
1. I have extended the IDoc type DEBMDM06 to ZEUDEBMDM06
2. Created a new message type ZDEBMDM (using WE81)
3. Assigned the message type to IDoc type(using WE82).
4. Created a new extraction object ZCUSTOMER_EXTRCT from CUSTOMER_EXTRACT by executing
program 'MDM_METADATA_MAINTAIN'.
5. Maintained the view 'VMDMMETA' using SM30 to add custom segments and altered the positions according to new IDoc type.
6. Found a user exit to fill custom segments.
7. Executed the transaction MDMC, in the debug managed the hord coded extraction object from 'CUSTOMER_EXTRACT'
to 'ZCUSTOMER_EXTRCT'.
This has generated a single IDOC for 2 customers but ulike one segment for one customer, it has addes somany segments at same level.
Can we enhance the mass message transfer concept so that we can use it for extended IDOC type so that I can have custom segment types added ?
Thanks in advance...
Arun
Edited by: Arunkumar Ponnoju on Sep 8, 2009 11:31 AM

hi Caíque ;
Firstly thanks for your answer.But your badi is at CRM side, I want to fill BDOC with custom fields from ECC to CRM when I changed them in IE02 of ECC.
Do you know there is any badi after BDOC is filled in ECC.
Regards.

LSO course authorization for Organizational Unit

Hi,
Is is possible to restrict courses in a course catalog according to Organizational unit. In the system we can restrict users to specific courses through structural authorization, but is it possible to maintain authorizations on Organizational units for LSO Courses or course types.
Regards,
Asad

Disappering is the right behavior. On delivery method WBT participant type 'O' cannot be booked because WBT can be only accessed using Learning portal and Learning portal cannot be logged in using Org. Unit. So this is not possible for this release.
But i have heard in EHP4 this option of Org. unit booking on WBT is possible but not directly but system will take care if you select an org unit for booking.
Regards, kavya
Edited by: Kavya Shree on Oct 30, 2008 10:08 AM

Any suggestions on how to keep a call going successfully? During the course of my conversations, my phone calls end..My cheek touches the screen or my chin dials another number. I am very frustrated. I hold the phone in all directions, but still?

Any suggesstions on ow to successfully complete a call. During the course of a conversation, my face hits the screen and either disconnects the call, switches to Face Time, or dials another number from my Contacts. I hold the phone in all sorts of directions, but still this problem. It is so annoying to the caller and to me! Any suggestion?

The iphone is designed to lock the screen when it is next to your face.
If it is not locking when it is against your ear, then try basic troubleshooting: Restart,reset, restore
Unless you have a case on it. If you have a case, then remove the case and see if that solves it. Otherwise, try basic troubleshooting.
If all fails then make an appointment at the local genius bar or call Apple support to arrange from a replacement.

Post Mass External Transfer - can't seem to schedule in our FINDEV instance

We recently applied patch sets (7666112,6317575,7044061) to our FINDEV instance, and now when testing the FA functions, we can't seem to get the LOV to the Post Mass External Transfer job. We tried receiving PO line items and also transfer asset to new location but still can't select LOV entitled 'LCB Assets'. Can you help isolate which table and/or script to check what triggers the LOV to display. We appreciate it.

Per Oracle support - suggested to apply one off patch 7533992. After applying patch, we were able to schedule Post Mass External Transfer job.

LSO : Direct deep Link to LSO-Courses

Hi there,
we need to build links to specific LSO courses which should be shown in an iView within our EnterprisePortal.
So how must the basic LSO-Url
<address of the SAP Web Application Server > <SAP/BC/BSP/SAP/HCM_LEARNING/LESO.HTM
be modified in order to deep-link to a certain course or course-folder ?
Cheers
Walter
Edited by: walter wolf on Feb 4, 2011 1:40 PM

Walter,
If it is possible to locate the URL of the course, you may try to modify the parameters in the BSP iView to point to the right course or course folder directly.
See the documentation: [Technical Settings for the Learning Portal|http://help.sap.com/erp2005_ehp_02/helpdata/en/e6/e7cf3b8fe10428e10000000a114084/frameset.htm]
Mikhail.

Mass Qualification Transfer during LSO Course Follow Up

Similar Messages

Maybe you are looking for