Master data check not working when loading into and ODS object

Hi guys,
we are loading transactional data into an ODS from a flat file.
In the infopackage, we have checked the option :
"Do not update data if no master data exists for a characteristic".
This option seems to be unreliable :
For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
Any help appreciated.
Many thanks !
Pierre-Yves

Hi Dear,
please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
hope this help.
cheers,
balaji
Message was edited by: Balaji NS

Similar Messages

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

XML Data Button Not working when Exported onto BusinessObjectEnterprise

I have an XML data button on a dashboard. It works fine in preview and on web. It does not work if it is exported onto Business Object server using XCelsius' Export to BusinessObjectEnterprise.
In the InfoView, I double click on the flash file, the flash files opens as expected, but when XML Data button is clicked, no new data seem to come in...
If I export as Adobe file, and then post it onto the server, and view it using Info View, the XML data button works just fine.
Please advise.

Hi All,
Even I have similar requirement.
Any work around is appreciable.
Thanks
Vinod

Component Slider not working when loaded from another swf file

I have a simple Flash application that uses a component Slider to increase or decrease the size of the text in a TextArea (ta). It works perfectly fine on its own, however, when I try to load the same swf file from another application, I get the following error...
ReferenceError: Error #1069: Property fl.managers:IFocusManager::form not found
on fl.managers.FocusManager and there is no default value.
at fl.controls::Slider/thumbPressHandler()
Code...
import fl.events.*;
import flash.text.TextFormat;
ta.text = "Lorem ipsum dolor sit amet";
var tf:TextFormat = new TextFormat();
tf.color = 0xCCCCCC;
tf.font = "Trebuchet MS";
tf.size = 12;
slider.addEventListener(SliderEvent.THUMB_DRAG, sliderChange);
style();
function style():void
    ta.setStyle("textFormat", tf);
function sliderChange(e:SliderEvent):void
    tf.size = slider.value;
    ta.setStyle("textFormat", tf);
Could the containing swf file that I'm loading the slider swf file in anyway effect the slider application? I don't quite understand why it works on its own, but not when loaded from another app.

add a slider component to the main (loading) swf's library.

Camera not working when plugged into certain USB ports

I just purchased a Creative Live! Cam for use on my dual G5 running 10.5. When I plug the camera into the USB port on the front of the Mac, it works fine with iChat.
However, when I plug it into the back of the monitor (older style Cinema display), it says it is in use by another application.
Any idea how to resolve this? The cable isn't terribly long and the machine is several feet away from the monitor, so I'd like to use the ones on the monitor. (Obviously it gives a power-error message when plugged into the keyboard, which is normal).
Thanks

Seems like it is a USB 2.0 or not problem
10:38 PM Saturday; August 23, 2008

Extraction through master data attribute not working

Hi All,
In my ODS, i have a field Sales Document Item, with attributes ship-to-party, sold-to-party, etc.
Now, ship-to-party and sold-to-party are extracted using the update method master data attribute of Sales Document Item.
For some of the Items, the ship-to-party and sold-to-party are getting extracted properly, but for others, they are returned as blank; even though these records are present in the master data for Sales Document Item.
Kindly provide your inputs for this issue...

Hi Apeksha,
Check your transformations.for those "ship-to-party and sold-to-party "
Thanks,
Vijay.

I NEED HELP My cellular data is not working! I called and went to Apple INC. And At

So after July 4th 2013 I experienced wi-fi problems. I wasn't able to keep connected and i kept getting kicked out my own wi-fi. I left it continue a while because i thought it was only temporary. But i noticed my cellular data with at&t hadn't been working properly for about a month. Then it started getting worse till the point now I cannot use nor wi-fi nor cellular data. I called Apple Inc., they thought it was a bug, and we took procedures for trying to fix it. We restarted it, and reset network settings. Finally they suggested calling or going into at&t. I called first and we did almost same exact procedures as apple. So I decided going into At&t, they changed my original sim card and was only recieving 1 bar of signal, but i was bad. I couldn't do anything. After they scheduled and appointment at Apple store, ugh! which was such bad service. People everywhere and rushed through my problem and he didn't even let me explain. He only suggested I buy their ipad exchaging mine. In which come on. I couldn't back up my photos and stuff that instant. I asked him to give me a minute and he never came back. Like what was the point of that appointmet? After leaving I walked about 2 streets down and all my cellular data bars and 3g were up. It only worked there and when i was driving home and got home nothing once again. Not even inside the store. i mean others wi-fi works in some areas and my cellular data was good until now . I know At&t told me they were not experiencing any technical issues and everything was good, so i know its not due to that. My siste's mini ipad is working fine, so is my sisters ipod. I really need help and someone to take time in reading this and or helping me.Please thanks!

Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

Lenovo G580 boot menu is not working when pressing F2 and F12 key

QuestionI bought a new Lenovo G580 series laptop. After installation of Windows 7 Ultimate x64 bit edition, a problem revealed when Lenovo driver get installed.
When I installed Intel HD 3000 graphics driver and restarted laptop, the Window was unable to start normally. It displayed an error, so a recovery program started which was recommended. But this program failed to resolve the problem. Later, I tried again to load Windows normally but the blue screen fatal error showed up.
I attempted to reinstall Windows again, but after restarting window, the boot menu was not showing up after pressing F12 key. F2 key was also not working either.
I spoke to a Lenovo techincal assistance expert and they suggested me to remove battery and charger and press start key for 30 seconds.
My problem still remains the same, and I am unable to access boot menu.
The bios version is 62cn34ww. ls there a way I can get this running again?
AnswerPlease take note that the suggestion below is just a troubleshooting guide. If the steps could not fix the issue, you need to send you machine in for service for further assistance.
Try removing the hard disk , then press F2 button to enter BIOS
If you are successful in entering the bios, pleaes load set up defaults
Save setting by pressing F10 and shut the machine down
Connect the hard drive back and check if can enter BIOS via F2 and F12 to see boot menu

"OK, I will retain my sanity.... changed & of course forgot windows 7 password on my Lenovo H430 desktop. (about a month ago) came accross my windows disc & was going to see if I could boot from it (wouldn't from the pasword unlocker i downloaded) Anyhow, i evidently have a password to enter bois setup which i attempted to "guess" baaad idea. i am now looking at Fatal Error.....System halted on my Lenovo H430 desktop. how do i proceed without doing any damage??? HELP...

Dell laptop headphone jack does not work when playing audio and video in Firefox 27

My problem is similar to the one posted in this thread: https://support.mozilla.org/en-US/questions/986978?esab=a&s=laptop+headphones+don%27t+work+with+firefox&r=2&fpa=1&as=s
I believe it has little to nothing to do with extensions.
I have just installed Firefox 27 on the Dell Inspiron 3520 laptop of a friend. She is an unsophisticated user who has a computer for email, simple web browsing, and watching YouTube and other online videos. Because she frequently seems to end up with junk on her machine, I wanted to switch her over to Firefox so I could install ad and script blockers that would hopefully slow down the frequency of adware and malware roosting in her system.
The laptop is a Dell Inspiron 3520 with an Intel celeron CPU (64-bit), running Windows 8. There are standard end-user applications installed (Adobe Reader, VLC Media Player, etc.), but no tweaking utilities, etc. The audio drivers are Cirrus Logic High Definition Audio.
I've been troubleshooting the laptop today trying to track down why the integrated speakers continue to work when the headphones are plugged in, with no sound coming through the headphones. Because I had run a series of virus / malware / adware scans just before installing Firefox, I thought I had mistakenly deleted some system audio files.
It finally became clear after toggling multiple settings, playing with Windows and Dell sound settings, and experimenting, that the headphone audio jack still works as it should in the system itself (for example, playing videos through VLC Media Player) and in Internet Explorer. It is only in Firefox that plugging in the headphones does not send audio through the headphones nor cut out the integrated speakers.
Sometimes there is a silencing of the integrated speakers for a few seconds, but then the audio kicks in again. (I am using YouTube and a certain movie streaming website to test the audio).
However, if the headphones are plugged in before starting the videos, the sound comes through the headphones, but unplugging the headphones, then reinserting them, stimulates problem again. Not only that, but then in YouTube the video will stall and can't be restarted until the page is reloaded.
Again, this is a fresh Firefox install of less than 24 hours, with only Adblock, Adblock Plus Pop-up Addition, Flashblock, and NoScript installed. There are no themes installed and most of the Options are the defaults that are set upon installation.
I have both disabled the add-ons and uninstalled them entirely before testing the headphone funtionality. In both instances the problem persisted. I've also uninstalled and let Windows re-install the Cirrus audio drivers.
Does anyone else have any insight into this problem, and any potential solutions other than "start in Safe Mode" and "reset Firefox"?

Firefox can switch audio devices within ~ a + or - 10 minute period or so (Just a guess). At which point it latches onto the audio device and will never change until the entire process is shutdown (read last paragraph, there is an exception)
Ive had this problem for a few months now, at least. And I switch back and forth from my sound system and my wireless USB headset.
If anything will fix this i believe it would be disabling "Allow applications to take exclusive control of this device" in the properties of your default audio device, but i doubt it. I think this is an issue regarding the code in firefox itself.
I'd like to see this turned into a default feature, being able to disable and enable the ability to stay on whichever device was the default at the time of launch, or to always play on the current default device, even if its changed. That or being able to choose a specific device/devices (WOULD LOVE TO THIS).
Other than that I dont really have a solution, and I kind of doubt anyone will unless its addressed in the next update.
Oh I thought of one solution that doesnt require restarting firefox, disable the current audio device and the sound will automatically switch to the next available device. Or possibly when a new device is introduced?? I havent done much testing on the matter though. This is just my best guess based on my personal experience with firefox.

Why does my ipad not work when powered up and screen just lights up dark blue?

IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Data table not working when jsp is in a subfolder

In order to organize my jsps I created a few subfolders and placed my new jsps in there. The problem is that when I drag a data table onto the page it does not display correctly. Only the headers show up. Draging a datatable onto a jsp that is not in a subfolder works fine. What gives?

There are known issues with moving the pages into subfolders as well as renaming subfolders... from release notes:
Creating a web page in a subfolder causes a page bean to be created in a corresponding sub package in the Java Sources folder. When renaming a subfolder containing web pages, Creator might not properly update the package names of the page beans in the Java Sources directory. In addition, the
managed-beans.xml file might contain leftover references to the old bean names.
Workaround
Use the code editor to change the package names of the Java page beans and delete obsolete
references to the renamed beans in the managed-beans.xml file.
http://developers.sun.com/prodtech/javatools/jscreator/community/forums/index.jsp
This is one area where we know we need to do more testing - so there may be additional gotcha's we haven't identified yet.
If you create the page initially in the subfolder, is all fine?
v

DropDown list appl is not working when integrated into Portal

Hi all,
In my WebDynpro appl, I have a dropdown list.Which sends data to backend(R/3). This appl is working fine, when it is integrtaed into portal, even before i select from dropdown am getting <b>Access Denied error</b>.
Help me.
Thanks a lot.

Sounds like a PCD Permissions issue. Try assigning Read Access permissions to Everyone group for the following items:
1) the Folder containing the iView and/or
2) the application itself
Read about how to assign permissions using the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604db05fd11d7b84200047582c9f7/frameset.htm">Permissions Editor</a>
Read about <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604f005fd11d7b84200047582c9f7/frameset.htm">Permissions</a>
Message was edited by: Umair Salam

Iphone 5 not working when plugged into widows

i have an iphone 5 around 6 months now, it charges perfectly and when i plug it into my laptop it does not show up at all, at the start this was not an issie and i now can now sync music or even charge it on the laptop. i have tried a different laptop and i different lead with no luck. the apple mobile device is intallef and both iphone and itunes are up to date in terms of upates. Ive tried alot f things at this stage and i looked at the thing on the itunes support on this and tried the things it said, again the phone is not even charging on the laptop, i have a windows 7 laptop and iphone 5.. any halp is great thanks

With the device not connected to the computer, remove and reinstall iTunes, following the instructions in this support document http://support.apple.com/kb/HT1923. Make sure you follow them in order, or it could lead to problems. After reinstalling, connect the phone. It should reinstall the drivers at that time.

Wireless printing does not work when VPN into network (officejet 4500)

Officejet 4500 G510n
I print with wireless, which works fine,
Until I VPN into the network (which is most of the day) at which point printer shows offline.
To print what is in the que, I have to log out of the network, wait for it to print, then log back in.
Is there a fix for this?

Hi,
Thank you for your reply.
For that you will have to contact your network administrator, ask them to grant you access to use the resources on the local network when you are connected to the VPN. So that you can use the printer, when you are connected to the VPN.
As I Said earlier, when you are connected to the VPN you completely on a different network (Office Network) and you are disconnected from your local network. Your local network will just be acting as a bridge.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Master data reports not working

Hi Gurus,
I created report based on 0EMPLOYEE(MasterData). I have diffrenet users with authorisation to see this report. But I execute this report I got NO AUTHORISATION . I checked the user profile S_RS_IOBJ was missing , so I added the object with the following values in the object
Activity -
3
Infoobject: -
0EMPLOYEE
Info Object Catalog: -
Sub object of Info object -
DATA
But the problem still exists i am not able to access this report which is built on Oemployee.
User has S_RS_COMP , S_RS_COMP1 along with other auth objects.
Regrads
A.Vasister

Hi All,
I added 0employee in S_RS_COMP and it is working fine. I think we need to maintain * or the the technical name of the infoprovider in the INFOAREA ( S_RS_COMP ) to allow user to access data from that infoprovider.
Regards
A.Vasister

Master data check not working when loading into and ODS object

Similar Messages

Maybe you are looking for