Master data data sources

Hai,
experts,
i have an doubt ,for master data v have any special cockpit is there as LO,
if som of the master data supporting delta means,
how the delata mechanism work for that data souces?
how the master data arrives from table to PSA?
take for example how the master data comes from 0mat_attr data souces to PSA?
and y v required the LSMW for import the master data to table?
plz explain am struggliing in this

Hi Natarajan,
The ans to ur questions are below.
We do not have special cockpit for master data load such as LO Cockpit. We do not have the delta management concept, as in the case of LO extractors. In most cases, master data load is always taken as FULL Load.
However, we can go for a pseudo delta in many cases when the vol becomes huge.(Intervals can be used for an year in such cases) For e.g. master data load for Notification, Sales Order etc. For IOBJ 0MATERIAL as well, we use a FULL load.
LSMW is for migration of master data from legacy systems. If the source is R/3 only, then u will nt use LSMW. It may be required, if you need to get some historical data from a legacy system to BW and need to store in the same IOBJ.
Hpe this helps,
VA

Similar Messages

  • Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP

    Hi BW Guru's
    We have install the Standard Data Targets from Business Content.  Now i want to do the same for Master Data can any one help me in selecting the relevant master data data sources for the following Data Targets.
    Your help will be appreciated.
    FI-GL
    INFOCUBE    0FIGL_C01    General Ledger: Transaction Figures   
    INFOCUBE    0FIGL_C02    Cost of Sales Ledger: Transaction Figures   
    INFOCUBE    0FIGL_VC1    General Ledger: Financial Statements   
    INFOCUBE    0FIGL_VC2    Cost of Sales Ledger:Financial Statements   
    INFOCUBE    0FIGL_C10    General Ledger (New): Transaction Figures   
    INFOCUBE    0FIGL_R10    General Ledger (New): Transaction Figures Remote   
    INFOCUBE    0FIGL_V10    G/L (New): Balance Sheet and Profit and Loss   
    INFOCUBE    0FIGL_V11    G/L (New): Balance Sheet and Profit and Loss Remote   
    FI-AP
    INFOCUBE    0FIAP_C02    FIAP: Transaction Data   
    INFOCUBE    0FIAP_C03    FIAP: Line Item   
    Thanks in Advance,
    Ganni

    AC --> AC-IO -
                                        All DataSources
    FI -->  FI-IO -
                                        All DataSources
    FI -->  FI-AR --> FI-AR-I0 -
                        All DataSources
    FI --> FI-AR -
                                         0FI_AR_4, 0FI_AR_10,0FI_AR_6
    FI --> FI-AP --> FI-AP-I0 -
                         All DataSources
    FI --> FI-AP -
                                         0FI_AP_4, 0FI_AP_6
    FI --> FI-GL --> FI-GL-I0 -
                         All DataSources
    FI --> FI-GL -
                                         0FI_GL_10
    LO--> LO-IO -
                                   All DataSources
    SD--> SD-IO -
                                         All DataSources
    SAP-R/3-IO -
                                         All DataSources
    PI-BASIS--> 0CA_GD --> 0CA_GD-IO ---     All DataSources

  • Master/Transaction data from ECC to APO-BW

    Hi All,
         Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
    Regards,
    Joy

    Hi Santhana,
    If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
    1. Create Generic Data Source in ECC for thet Sales Order table.
    2. Replicate that data Source in to APO BW with Source System.
    3. Create whole data flow process by using created Data Source.
        Data Flow Process: 1. Info Package
                                      2. Info Source
                                      3. Info Cube
                                      4. Transformation between DS & IS, Then IS & IC
                                      5. Data Transfer Process.
    4. Load data from ECC to APO BW
    5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
    Hope this will help you.
    Regards
    Sujay

  • Adf master -detail data table

    Hi,
    I have adf master detail data table , I put af:selectbooelancheckbox and autosubmit is true in detail data table .When I click the detail table , valuechangelistener of the af:selectbooelancheckbox is runnig I don't want this situation. Is it possible to prevent this ?
    regards,

    Hi
    I can't remove autosutmit = true because I handle the valuechangeevent in managedbean.Why master table event fire the valuechangeevent in detail table ? I check the submit source in managedbean but It doesn't prevent to fire valuchangeevent ? Is there any way except ignore autosubmit = true ?
    thx,

  • How to data insert Source server and Linked server (Target Server) at same transaction

    I have try several times for Data insert Source server and Linked server (Target Server) at same transaction.  I am using Begin transaction.  but Source server is completed and Linked server error (or Linked server Completed and source server
    ERROR). at this moment I want ROLL back. how?

    Hi
    Run below query by changing to yourr linked server name and see if DTC is enable or not.. if not
    Begin distributed transaction
    select * from [ServerName].master.dbo.sysprocesses
    Commit Transaction
    To enable MSDTC on each Web server on Windows Server 2008
    Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
    In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
    Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
    Click the Security tab.
    In the Security Settings section, click Network DTC Access.
    In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
    In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
    In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
    Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
    Select Enable XA Transactions, and then click OK.
    Repeat steps 1 through 9 on the other Web servers.
    Thanks
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • View document in material master, Basic data 2 screen?

    Hello gurus,
    How to view a DIR assigned to material master - basic data 2?
    According to help.sap.com:
    Additional Function for Material Master Record:
    In Customizing for the Material Master, you can define a standard document type by choosing Make Global Settings.
    -  Done this: assigned document type needed, created a DIR with that type and assigned it to a given material
    Documents of this standard document type are displayed in the material master record, in the Basic data 2 view (Extras ® Document data).
    - Information of the DIR can be seen in the main screen, no path Extras --> Document data (I know DIRs are shown behind menu path Additional data --> Documents)
    You can display the original application files of a document (for example, an engineering/design drawing) directly from the object (for example, material) using a display application (viewer).
    PROBLEM starts here: no icon or button to click in order to view the document although the help states so.
    Any idea what should be done? Should I install a software of some sort to view? Assign it somehow with SAP? The document type here is doc (MS Word), so nothing special.
    Any advice is highly appreciated.
    BR,
    Pipsa

    Hello Sam,
    Sorry, I think I described the problem inaccurately.
    I could see the document already but for that I must follow the path Additional data --> Document data.
    My core question was: Is there a means to allow a user to display the document directly in the screen Basic data 2 since system creates a new subscreen called Design documents assigned anyway?
    It seems that the design documents assigned is for information purposes only. It would have been far better with usability to have the display icon in the main data.
    BR,
    Pipsa

  • No data in source system

    Hi at all,
    I extrakted initial data from source system and get a      warning "No data in source system". I checked the system and it is ok. Plz help me

    Hi
    Yep ,,, if u do and delta after Init ...the records it will fetch is 0records
    IF there are no changes happend in r3 then u wont get the data ..
    So, Go to the R3
    1) check ur delta queue in R3
    2) or RSA3 and test extract for ur datasource in the D mode and also select ur sourcesystem as the BW sstem
    u have to get 0 records
    hope it helps
    regards
    AK

  • Report to fetch the text information from customer master sales data

    Dear Experts,
    We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
    There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
    I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
    So we need the valuable inputs to realize the requirement.
    As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
    In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
    Kindly suggest accordingly.
    Many thanks in advance.

    Hi Dharmendra Kumar,
    I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
    For customer details, the available BAPIs are:
    BAPI_CUSTOMER_GETDETAIL
    BAPI_CUSTOMER_GETDETAIL1
    BAPI_CUSTOMER_GETDETAIL2
    However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
    Regards,
    Raghu.

  • Error in Process Chain while extracting data from source system

    Hi All,
    Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
    Please let me know why this error is coming for first why it is not coming after repeating the step?
    Thanks & Regards,
    Murali.

    Hi Murali,
    Hope you are doing good..
    Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
    Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
    If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
    As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
    Regards,
    Anil Pragada.

  • Customer master-general data-attribute-creation

    Hi,
    I would like to use the attribute 1 to 10 fields in customer master general data to fill up relavant to customer . i have seen some SCN postings regarding activation of those fields technically.
    i want to create some data in the attribute same like customer group 1 , while creation of customer master , i shall select the drop down and save it
    what is the menu path/transaction code for that please
    Thanks and regards,
    Pratheep

    Hi
    Check this menu path and also check below document in which Suhaib Bin Aziz has explained how to find SPRO path from front end screen.
    How to find SPRO Path from any Particular Screen
    Thank$

  • Master text data in Open Hub

    Hi All,
    I am working on BI 7.0 and am currently working on Open Hub. I have to extract data from a cost center infocube, but i also need to send the master text data for certain fields along with the infocube data into the file server.
    Is this possible with open hub services,could someone please provide me with a step by step procedure to this one.
    I have been following a similar thread
    Nav. Attrib in Open Hub 04s
    Please let me know if it was succefully implemented by someone.
    Regards
    Dipali

    Hi Uppala,
    Following are 2 approaches to achieve this
    Approach 1:
    1. Create info spoke which will extract data from cube to data base table (do not use file)
    2. Create one more info spoke which will extract master data text to data base table (again do not use file)
    3. Create join on both the data base tables.
    4. Write a ABAP program which will create a file based on the joins of tables.
    Approach 2 :
    1. Create multiprovider on cube and master data info object
    2. Create info spoke based on the multi provider, that will extract data to flat file
    For 2nd approach u have to put certain filters to avoid unwanted rows
    Regards,
    Ajinkya

  • Billing Legacy master & transactional data conversion/migration in SAP ISU

    Hi Experts,
    Please let me know, in ISU implementation project, what is Billing related Legacy master & transactional data conversion/migration is done in SAP ISU system.
    Thanks in advance

    Pankaj,
    There is no straight forward transaction to download the Configuration data and export it to a file.
    However, you can use the BC set functionality to extract the IMG node with its contents.
    Check the following  SAP help portal link for more info on BC sets
    Business Configuration Sets (BC-CUS) - SAP Library
    The archive data that you are talking about; Is it master data or transaction data?
    Also, what this data is related to-Financial Documents, Billing related info?
    There is one standard transaction SARA through which based on the migration object you can archive the data and export it into a file in a particular location..
    Hope it helps..
    Thanks,
    AB

  • Vendor Master created date report

    Can I know the vendor master created date & time in SAP, which std report is giving this information.
    please help
    Thanx in advance
    srihari

    >
    Ediga Srihari wrote:
    > Can I know the vendor master created date & time in SAP, which std report is giving this information.
    > please help
    > Thanx in advance
    >
    > srihari
    Check report S_ALR_87012086...you can also get the information in LFA1 table
    Regards,
    Indranil

  • Change Customer master Address Data using Structure biadd2 in report rfbide00.?

    hello
         i want to change Customer  Master Address Data using using RBIDE00 report program but when i execute the report it will accept input from batch file
    but the same is not getting updated in  customer master .
    please  help me to resolve this issue .
    thanks & regard
    laxmikant soni

    Found the answer from SDN - not possible unless using some BUS.
    RFBIDE00 - Address data issue
    Thread closed.

  • Eliminate duplicate while fetching data from source

    Hi All,
    CUSTOMER TRANSACTION
    CUST_LOC     CUT_ID          TRANSACTION_DATE     TRANSACTION_TYPE
    100          12345          01-jan-2009          CREDIT
    100          23456          15-jan-2000          CREDIT
    100          12345          01-jan-2010          DEBIT
    100          12345          01-jan-2000          DEBITNow as per my requirement, i need to fetch data from CISTOMER_TRANSACTION table for those customer which has transaction in last 10 years. In my above data, customer 12345 has transaction in last 10 years, whereas for customer 23456, does not have transaction in last 10 years so will eliminate it.
    Now, CUSTOMER_TRANSACTION table has approximately 100 million records. So, we are fectching data in batches. Batching is divided into months. Total 120 months. Below is my query.
    select *
    FROM CUSTOMER_TRANSACTION CT left outer join
    (select distinct CUST_LOC, CUT_ID FROM CUSTOMER_TRANSACTION WHERE TRANSACTION_DATE >= ADD_MONTHS(SYSDATE, -120) and TRANSACTION_DATE < ADD_MONTHS(SYSDATE, -119) CUST
    on CT.CUST_LOC = CUST.CUST_LOC and CT.CUT_ID = CUST.CUT_IDThru shell script, months number will change. -120:-119, -119:-118 ....., -1:-0.
    Now the problem is duplication of records.
    while fetching data for jan-2009, it will get cust_id 12345 and will fetch all 3 records and load it into target.
    while fetching data for jan-2010, it will get cust_id 12345 and will fetch all 3 records and load in into target.
    So instead of having only 3 records, for customer 12345 it will be having 6 records. Can someone help me on how can i eliminate duplicate records from getting in.
    As of now i have 2 ways in mind.
    1. Fetch all records at once. Which is impossible as it will give space issue.
    2. After each batch, run a procedure which will delete duplicate records based on cust_loc, cut_id and transaction_date. But again it will have performance problem.
    I want to eliminate it while fetching data from source.
    Edited by: ace_friends22 on Apr 6, 2011 10:16 AM

    You can do it this way....
    SELECT DISTINCT cust_doc,
                    cut_id
      FROM customer_transaction
    WHERE transaction_date >= ADD_MONTHS(SYSDATE, -120)
       AND transaction_date < ADD_MONTHS(SYSDATE, -119)However please note that - if want to get the transaction in a month like what you said earlier jan-2009 and jan-2010 and so on... you might need to use TRUNC...
    Your date comparison could be like this... In this example I am checking if the transaction date is in the month of jan-2009
    AND transaction_date BETWEEN ADD_MONTHS(TRUNC(SYSDATE,'MONTH'), -27)  AND LAST_DAY(ADD_MONTHS(TRUNC(SYSDATE,'MONTH'), -27)) Your modified SQL...
    SELECT *
      FROM customer_transaction 
    WHERE transaction_date BETWEEN ADD_MONTHS(TRUNC(SYSDATE,'MONTH'), -27)  AND LAST_DAY(ADD_MONTHS(TRUNC(SYSDATE,'MONTH'), -27))Testing..
    --Sample Data
    CREATE TABLE customer_transaction (
    cust_loc number,
    cut_id number,
    transaction_date date,
    transaction_type varchar2(20)
    INSERT INTO customer_transaction VALUES (100,12345,TO_DATE('01-JAN-2009','dd-MON-yyyy'),'CREDIT');
    INSERT INTO customer_transaction VALUES (100,23456,TO_DATE('15-JAN-2000','dd-MON-yyyy'),'CREDIT');
    INSERT INTO customer_transaction VALUES (100,12345,TO_DATE('01-JAN-2010','dd-MON-yyyy'),'DEBIT');
    INSERT INTO customer_transaction VALUES (100,12345,TO_DATE('01-JAN-2000','dd-MON-yyyy'),'DEBIT');
    --To have three records in the month of jan-2009
    UPDATE customer_transaction
       SET transaction_date = TO_DATE('02-JAN-2009','dd-MON-yyyy')
    WHERE cut_id = 12345
       AND transaction_date = TO_DATE('01-JAN-2010','dd-MON-yyyy');
    UPDATE customer_transaction
       SET transaction_date = TO_DATE('03-JAN-2009','dd-MON-yyyy')
    WHERE cut_id = 12345
       AND transaction_date = TO_DATE('01-JAN-2000','dd-MON-yyyy');
    commit;
    --End of sample data
    SELECT *
      FROM customer_transaction 
    WHERE transaction_date BETWEEN ADD_MONTHS(TRUNC(SYSDATE,'MONTH'), -27)  AND LAST_DAY(ADD_MONTHS(TRUNC(SYSDATE,'MONTH'), -27));Results....
    CUST_LOC     CUT_ID TRANSACTI TRANSACTION_TYPE
          100      12345 01-JAN-09 CREDIT
          100      12345 02-JAN-09 DEBIT
          100      12345 03-JAN-09 DEBITAs you can see, there are only 3 records for 12345
    Regards,
    Rakesh
    Edited by: Rakesh on Apr 6, 2011 11:48 AM

  • TABLES FOR MASTER & TRANSACTIONAL DATA

    Hi all ,
    can some body help me with TABLES FOR MASTER & TRANSACTIONAL DATA
    DP,SNP,PP/DP.
    Thanks

    Hi,
    You can find out it as per your requirement.
    Use transaction SE80 - ABAP workbench  -->
    select Repository Information system  -->
    Select ABAP Dictionary  --> Data base table -->
    In the right hand side window you will get screen in that give details as below
    Standard selection screen
    Table name : enter *
    In the Application Component:
    You will get Tree structure to Select Application Componenet
    in that expand the node of SCM --> SCM APO --> SCM-APO-MD for Master Data
    Here you will get application  -- Double click on the required Application
    e.g. Duble Click on SCM-APO-MD-PR for Product
    Here you will get list of table related to application componenet Product
    <b>/SAPAPO/MATKEY                 Product</b>
    Some of the Master Data Tables:
    /SAPAPO/APNTYPE                APN Type
    /SAPAPO/APNTYPET               Alternative Product Number Type
    /SAPAPO/APO01                  APO Planning Version
    /SAPAPO/APO01DEL               Deletion Log File Versions
    /SAPAPO/APPLOCS                Location Master: Relevant Location Types for Application
    /SAPAPO/APPLS                  Application Types : SAP Application Types
    /SAPAPO/CD_LOC                 Customizing Change Documents Location
    /SAPAPO/CD_PPRFL               Customizing: Change Documents: Product Profiles
    /SAPAPO/CD_PRDHD               Customizing: Change Documents: Product
    /SAPAPO/CD_PRDLC               Customizing: Change Documents: Location Product
    /SAPAPO/CD_PRDLW               Customizing: Change Documents: Storage Type Product
    /SAPAPO/CD_PRDWH               Customizing: Change Documents: Storage Type Product
    /SAPAPO/CONSPROF               Model Consistency Check: Check Profile
    /SAPAPO/CONSPROT               Model Consistency Check: Check Profile Descriptions
    /SAPAPO/CUSTCHK                Model Consistency Check: User-Specific Checks
    /SAPAPO/CUSTCHKT               Model Consistency Check: Descriptions of User-Spec. Checks
    /SAPAPO/GRPTYPE                Product Group Types
    /SAPAPO/GRPTYPET               Description of Product Grouping
    /SAPAPO/LOC                    Locations
    /SAPAPO/LOC_SUB                Mapping Table for Sublocations
    /SAPAPO/LOCCOMP                Table Obsolete Since SCM Release 4.1
    /SAPAPO/LOCMAP                 Mapping Table for Locations
    /SAPAPO/LOCMOT                 Location: Means-of-Transport-Dependent Attributes
    /SAPAPO/LOCPROF                Version-Dependent Location Profile for Penalty Determinati
    /SAPAPO/LOCT                   Locations Short Text
    /SAPAPO/LOCVER                 Location: Version-Dependent Fields
    /SAPAPO/LTTYPE                 Location Resources
    /SAPAPO/LTVER                  Location Resources: Version-Dependent Fields
    /SAPAPO/MARM                   Units of Measure
    /SAPAPO/MATAPN                 Alternative Product Number
    /SAPAPO/MATBOD                 Product BOD Assignment
    Hope this information will be helpful for you work on and find out Important tables for your own BP

Maybe you are looking for