Master data reading does not work

Hello,
Having as a source for a transformation an infosource, masterdata reading (i.e. enhance master data with attributes) produces less data records than a simple transformation without reading master data attributes.
Question: Is the reason for this behavior, that an infosource is no info-object based data provider as is written in the RKT docu?
Thank you + regards,
Ingo

Hi Ingo,
please open an customer problem message, since this seems to be a bug. It might be that it happens only in certain scenarios. Nevertheless it should be investigated by development.
  Cheers
    SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Similar Messages

  • Use member on data form does not work

    Hello,
    "Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
    Who is resolve this problem?
    Version hyperion: 11.1.2
    Thanks

    I don't have a solution for you but more steps to solve the problem
    You are ultimately on the right track in some ways but break it down into it's components.
    The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
    So I would strip this baby down to its bare bones then build it back up.
    1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
    Is it successful: go to 2
    If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
    2) Run the calc outside the form but with variables included. Did it prompt you correctly.
    Is it successful: go to 3
    If it isn't. What is wrong with the variable
    3) Now attach it to the form but don't hide the prompts
    Still good go to 4
    4) hide the prompts and run on save
    And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
    This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

  • Droid Razr Maxx HD Data & SMS does NOT work in South Korea

    If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

    I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

  • Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

    Here is the settings:
    SharePoint 2010 with SQL server 2008 reporting services configured
    When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
    The data parameter is set as "date and time" type and field name equals the col name in the SP list
    When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
    Is any step missing?
    Thanks for any advice !

    Hi ,
    How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
    Have you tested if other type parameter worked?
    Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
    http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Daniel Yang
    TechNet Community Support

  • Finger print reader does not work

    i followed the directions and my print was scanned, rescanned,and the edges were scanned and accepted but the reader does not react when the phone is locked....i deleated and rescanned and followed all directions which accepted my finger print....once again thereader does not unlock the phone...any suggestions?

    I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

  • After upgrade date selection does not work in xml forms

    Hi Experts,
    since we upgrade the portal from 7.0.19 to 7.0.24 we have a problem with the timestamp in the xml forms in combination with IE7. When we click on the date selction button, the date screen appears and the form disappears. The only option we can choose is cancel and then the date selection screen disappears and the form is not comming back. Selecting a date en choose ok does not work. I tried with IE6 then it works fine. Before the upgrade it works fine with IE7.
    How to solve this?
    thanks in advance.
    Vo.

    I created a OSS message and the answer is : [Note 1491775 - XML Forms locked when closing browser window|https://websmp130.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1491775]
    gr
    Vo.

  • Request Scope for portlets? Sharing data tutorial does not work for portlet

    I created 2 identical applications, one that was a regular JSF web app, and one a JSR168 portlet. By following the "Sharing Data Between Two Pages" tutorial, I can get this technique to work without a problem in the web app, but the portlet (deployed locally using the pluto server) does not work. What is the difference between a regular app and a portlet app?
    This shows that portlets apparently handle scope much differently than other applications, so any information relating to this would be helpful to pass along.

    Portlet Life Cycle Differences
    A portlet page is the same as a web application page in the Creator 2 application
    model with differences only in the page life cycle. To best understand the life
    cycle differences, you must first understand how a portal interacts with a portlet.
    This interaction between portals and portlets is defined by the JSR-168 Portlet
    specification. Typically a portal display in the web browser shows multiple
    portlets. That is, when the portal page is displayed, there are actually multiple
    portlets displaying or rendering their content. The job of the portal is to manage
    how these portlets are displayed. Internally, the portal is responsible for telling
    each portlet two things:
    1. When to display itself
    2. If there has been an action, such as a button press, performed inside that
    portlet.
    When a portal wants portlets to display their contents, the portal sends a render
    request to each portlet showing in the portal. If one of the portlets showing in the
    portal has a button tied to an action request, when that button is pushed, the
    portal fires an action request for that portlet. In addition, the portal generates a
    render request for the portlet and all other portlets on the page. You should note
    that the portal implementation fires both action and render requests for each
    action method on a portlet showing in the portal. The implication of this
    interaction means the portlet page being rendered can not make assumptions
    about the state of the values to be shown. Unlike a normal web application page,
    a portlet page can't assume that the page being rendered in the Render Response
    phase is the same page that was built in Restore View. If a portlet wants to
    maintain state across repeated render requests, the portlet must use the session
    bean to store stateful information.
    The main point to remember is a portlet page must always be prepared to render
    it's values from scratch or session data. This implies you should never bind
    portlet page UI components to page bean properties or request bean properties.
    Also, you should never rely on page bean instance variables that might be set
    during an action event.
    Hope this helps.

  • UNION for Columns of CLOB data type does not work

    Hi,
    I have two tables Encounter & Encounter_History. They have same columns. One column is of type CLOB. My requirement is to retrieve all the distinct records from both the tables with order by a date column. But problem is, UNION does not work in case of CLOB data type.
    I know it will work if I use UNION ALL, but it returns duplicate records.
    Please give me suggestion, how to solve this problem.
    For example: The following query does not work since column1 is a CLOB data type
    select column1 from table1
    union
    select column1 from table2
    Thanks

    But for sufficiently small clobs you can try:
    michaels>  SELECT TO_CLOB ('abc') cl
      FROM DUAL
    UNION
    SELECT TO_CLOB ('abc')
      FROM DUAL
    Error at line 1
    ORA-00932: inconsistent datatypes: expected - got CLOB
    michaels>  SELECT TO_CHAR (TO_CLOB ('abc')) cl
      FROM DUAL
    UNION
    SELECT TO_CHAR (TO_CLOB ('abc'))
      FROM DUAL
    CL                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     
    abc                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
    1 row selected.

  • Adobe Reader does not work-how to use adobe reader on Lion

    I was trying to print an international label on eBay via Adobe Reader, and was very dissapointed and shocked that it does not work on Lion.
    I was so happy that I figured out how to use adobe reader on Lion, and hope I can help anyone else who is frusterated too.
    Step 1. Download Google Chrome
    Step 2. Printe your international label, or whatever you need to do that uses Adobe Reader

    Thanks Shelly! I too was having trouble and thought it was something wrong with my Mac. I still have a big though. When I try to print the saved pdf file, I get a pop-up that says "The document could not be printed. There are no selected pages to print" even though I am looking at the complete doc. It's there and in my print prompt "all pages" are selected to print. The way I got around this, is by emailing the pdf file to a gmail address and viewing the attachment via Google Docs. It loads perfectly and prints without a problem.
    Carla

  • Exit button - Germany Personal data service does not work

    Hi all,
    We just upgraded our portal to EP7 Sp22 with 1.3 ESS Business Package and 603 XSS components in the back-end.
    In testing Germany and all countries that use the Germany personal data service, the Exit button on all screens (Overview, Edit, Review and Save, Confirmation) does not work. The Exit button, when selected, keeps the user on the same screen. 
    I am not sure where the button is configured, but it should always take us back to the page from where the service was launched.  So if I accessed through the Overview page or Personal Information page, and then click on the exit button, I should be taken back to one of those pages.
    Where can we configure the exit button for the German Personal data service, so that it works and takes the user back to the page where they started.....?
    Cheers!, Neeta

    Hi,
    The Germany personal data service is the only one where the exit button is not working. All other countries are testing fine.
    Is it a customization issue on the back-end? The resource in spro for germany is configured with the pcd link of the german personal data i-view.
    The other countries are also customized in the back-end with the pcd link of the appropriate i-view.
    Regards, Neeta

  • Selection in the Generic Data Source does not work

    Hi gurus,
    I have some problem with the selection in the Generic Data Source.
    I have created a view as a base of a Generic Data Source.
    This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
    In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
    I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
    On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
    However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
    eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
    Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
    Thanks a lot in advance.
    Best regards,
    Fen

    Hi Fen,
    Just check what is the output you get for the same selection for the view you created.
    Bye
    Dinesh

  • I can't boot windows in my iMac late 2011 as my internal cd reader does not work

    i can't boot windows in my iMac late 2011 as my internal cd reader does not work

    Which copy or version of Windows? and how where was it purchased?
    my window installed itself perfectly on another computer.
    One copy and you want to activate on two computers?
    With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s). 
    did you create 80GB or larger partition?
    also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
    OWC has up to 32GB, not cheap.
    http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
    Crucial is usally very helpful, try email cs.

  • Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

    Hi Experts,
    I am performing master data load through standard DM package with Filter selection as:
    1. Chart of Accounts
    2. Hieararchy selection has 4 hierarchy names
    3. Selected Import Text nodes
    4. Selected Set Filters by Attribute OR Hierarchies
    I have run this DM package for a set of data and selections a week ago and it worked fine.
    However when i run it now, it is giving issues,
    It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
    I am running the DM package in Update and have selection as External.
    Any sugestions for checks / has anyone encountered this issue earlier?
    Regards,
    Shweta Salpe

    Hi Guyz,
    Thanks.
    I found that the issue was with the transformation file where i was maintaining the RATETYPE.
    When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
    however now i do not have Ratetype populated in the system.
    my rate type mapping is:
    RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
    and in conversion file i have TOSKIP     *skip
    I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
    So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
    Regards,
    Shweta Salpe

  • Fingerprin​t Reader does not work under Win 7

    I have a T500 which I have just upgraded from Windows Vista Business to Windows 7 Professional.
    Everything apart from the Fingerprint Reader and the Wireless Broadband seems to work.
    The Fingerprint Reader is the Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.
    If I run the Lenovo Fingerprint software version 3.3.0.58 I get the error that the software cannot
    communicate with the sensor.
    The Wireless Broadband card is the Ericsson F3507g. The follwing drivers are installed:
    Network adapters:
        - F3507g Mobile Broadband Driver, version: 1.0.0.52 dated 29/07/2009
    Ports (COM & LPT):
        - Ericsson F3507g Mobile Broadband Minicard GPS Port (COM6), version: 1.0.0.28 dated 29/09/2008
        - Ericsson F3507g Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated 26/06/2009
    Smart card readers:
        - F3507g Mobile Broadband USIM Port, version 6.0.0.7 dated 12/05/2009
           Even if there is the driver information indicated above the USIM device says:
            "No drivers installed for this device."
    Universal Serial Bus controllers:
         - F3507g Mobile Broadband Device, version: 4.54.7103.1 dated 26/06/2009
    If I use the ThinkVantage Access Connections software I get the following error message:
    "The current wireless WAN connection is being managed by another client utility.
    Close the client utility and try again." But to my knowledge no other Wireless Broadband client is running.
    If I try Mobile Broadband Connect via the Vodaphone UK interface I get the following error message:
    "No Wireless Mobile Broadband device found."
    And finally if I try ThinkVantage GPS I get the folowing message:
    "The GPS NMEA CPM port is not available. You need to check the following things.
     - Another GPS application is using the COM port.
     - COM port is disabled. You can enable the COM port in Device Manager."
    Under Windows Vista both the Fingerprint Reader and the Wireless Broadband device worked without
    any problems. Do anybody have any ideas on how I can resolve these two problems.
    Best regards,
    Frode
    Solved!
    Go to Solution.

    Yes, it is the driver that seems to be the problem. Here is how I proceeded. Before I started to removed the Lenovo software and the driver I first made sure the the automatic driver installation was turned off. The easiest way to do this is to type "change device installation settings" in the Start Menu search box. A window then pops up with the question: "Do you want Windows to download driver software and realistic icons for your devices?". By default this is usually set at "Yes, do this automatically". Instead select the option "No, let me choose what to do", which will bring up another menu where one select the last option: "Never install driver software from Windows Update."
    After you have installed the new driver do not forget to put it back to the recommended automatic mode.
    I first went to Control Panel - Uninstall Programs and uninstalled the Lenovo Fingerprint Software. I then went to the Device Manager and uninstalled the AuthenTec driver version 2.0.0.18 and checked the box delete this driver software. I then rebooted the PC and during pre-boot went into the BIOS, selected Security and Fingerprint Reader and made a reset on the reader. After reboot I reinstalled the Lenovo Fingerprint Software 3.3.0.58 (7wf160ww). This time the installation went through without any error messages but when I started the software I discovered that it still did not work. When trying to run the tutorial or to enroll fingerprints I got the old error message: "Cannot communicate with sensor. Please confirm the sensor is ready."
    I then checked the driver and I found that I now had the older AuthenTec driver version 8.1.2.56 dated 07/07/2009 and everything looked OK from the driver point of view. I then suddenly remembered that I had forgot to uninstall the AuthenTec TrueSuite software. I immediately uninstalled the TrueSuite software and also yet again the Lenovo Fingerprint Software, but left the newly installed driver in place. After a reboot I again reinstalled the Lenovo Fingerprint software and this time it worked. I can now run the tutorial and enroll fingerprints and the fingerprints work 100% for the Windows login. I have not yet tried to install Lenovo Client Security. I will do that later. However, I have discovered that the AuthenTec TrueSuite software has not been reinstalled after doing the last Lenovo Fingerprint software reinstallation. I am not sure if this is a good or a bad sign. Perhaps Bananaman or Cleo_Lenovo can give me some feedback on this issue.
    I thank you all for helping me out with this problem. I find the Lenovo Forums of great interest and usefulness.
    Cheers,
    Frode

  • HP SimplePass Reader Does not Work after Sleep

    I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
    I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
    Simple Pass version 6.0 (latest downloaded from HP.com)
    Envy Dv6 7229wm
    Windows 8 64-bit
    Thanks

    Hello hawvi,
    I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
    Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
    What operating system are you using?
    How long have you had the problem?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for