Material Codes - not get transaction from last 5 years

Hi
Can we have a list of Material codes which are not in use/transacted from last 5 years? I mean, want to find out all dormant Material codes.
How can we find one time used Material codes?
Thanks
Ajit

it depends:
1. if your company's data was not archived within 5 years.
2. there are already archived data of MM.
normally i will use MB51 and get the the list of all material movements within 5 years.
then you can know what materials have movements within 5 years. (sorting and subtotal in excel)
then compare with full material list to get the result, with vlookup in excel.
by the way, MC46,MC50 can also work from certain degrees.
Edited by: JiQing Zhao on Apr 14, 2011 2:08 PM

Similar Messages

Vendor list - not get transaction from last three years

Dear Sir,
Can we have a list of vendor which are not get transaction from last three years ?
Vijay Vadgaonkar
SAP MM

either you write a z-report
or you download all vendor numbers from LFA1 table
then run MC$4 transaction for analyzing period of last 3 year.
download the vendor numbers from this report as well.
Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
However, these are the inactive vendors from purchasing point of view only.
vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

Thanks,
Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
But thank you for your reply!

Tax code not getting picked up from PO during SES

Dear Experts,
I am looking for configuration where the end user need not enter Tax code during SES. I tried a scenario where I did not maintain any service master and also did not enter any line item in service tab at item level, rather I processed my PO using limits.
Now when I prepare SES using this PO, Tax code is not getting picked up from PO and some tax code(I1) appears. Since I don't want end user to input any tax code I've left it blank.
Finally when I am doing MIRO, i am not able select the desired Tax code(say I8) as it is not available for selection. I get only one Tax code(say I1) available for selection. Even other Tax codes are not available for selection.
Please advise, how do I resolve this, why is the Tax code not getting picked up in SES? and why am I not getting other tax codes for selection in MIRO?
Thanks and Regards
Mansih

Hi,
Tax for service maintained in the service PO in the INVOICE TAB in item details. You are not going to maintain the service tax during SES. In SES you are just recognizing / confirming the vendor performed /completed the required service given to him.
During invoice tax code will flow from service PO to Invoice & you need to just select check box u201Ccalculate taxu201D & remove default tax code in MIRO, if any tax code set for default entry in MIRO. If you want your service tax code should appear in the MIRO screen then just activate in t.code:OBZT (relevant for all transaction),then you can select your service tax code during invoice verification WRT service PO.
Regards,
Biju K

In looking at my calendar for January, I found all the entries from last year. I thought I would delete the while month and start over, but it deleted all calendars from icloud. Can I get them restored and how. Stoormy

In looking at my calendar for next year I found all the entries from last year were there as well as a few more I intended to delete January and just start over but everything was deleted including from icloud, Any way I can get those restored.
Thanks Glenn

Maybe here:
iCloud: Troubleshooting creating backups

I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

i have not used ipad from last 1 year and now its not starting any suggestion how to start,

Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
Then try to turn it on.

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Purchase Req & Standard PO - Price is not getting Defaulted from Price List

Dear All,
Hope you are doing good!!!
We are implementing R12.1 for one of our client. This query is pertaining to the Advance Pricing with Purchasing. Infact client wants to default the Purchase Requisition and Standard Purchase Order Price from Price List.
I have done entire setup and defined ASL for this reason. But still price is not getting defulted from Contract Purchase Ageerement.
What could be the reason. Its an standard fucntionality but still its not picking up.
I would really appreciate if someone could help me on this. Its URGENT.
Thanks in Advance.
Thanks & Regards,
Aditya

Let us go through the steps involved in integrating Advanced Pricing with Purchasing so that we know if we have missed anything.
1. Create Price Lists in Advanced Pricing.
2. Setup Profile Options in System Administrator responsibility:
QP: Licensed for Product - at Application: Purchasing level = Purchasing.
QP: Pricing Transaction Entity - at Application: Purchasing level = Procurement
( Site level - ‘Order Fulfillment’ )
Profile option can be set at site, application, and user levels.
QP: Source System Code – at Application: Purchasing level = Oracle Purchasing
( Site level -- ‘Oracle Pricing’ )
Profile can be set at site and responsibility levels.
QP: Item Validation Organization - at Application: Purchasing level = null
( Site level -- specified in Financial Options )
Profile option can be set at site and responsibility levels.
3. Add item to the Price list Advanced Pricing ->Price Lists -> Price List Setup.
Enter the item/price/dates etc.
4. Create Contract Purchase Agreement.
5. Create Approved Suppliers List. In the Source Documents, select the Type as Contract and reference the Contract Agreement Number.
Create the Sourcing Rule and add the Rule to the Assignment Set.
6. Create the Standard Purchase Order referencing the Contract Purchase Agreement in the Reference Documents.
The Price listed should be defaulted from the Price Lists.
Cross-Check the following steps and let me know if it still fails and we can try to resolve from then on :)

Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

Serices Material is not getting picked Up in Proforma Invoice

Hi..
While craeting proforma invoice for serices,service material is not getting picked up..
where can be the settings?
Thanks
Manoj

Check if the item category is maintained in copy control from Say Sales Order to Proforma Invoice. T.Code: VTFA. If Item Category not maintained, then maintain it appropriately.
Regards,
Rajesh Banka

Iphone 5 not getting text from new numbers?

im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.

Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

RFC problem: could not get functionname from XML requst (sic)

I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan Graham

Thanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan

PO is not getting released from SRM

Dear Experts,
I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
(SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
Kindly let me know is there any t-code for enable communication between SRM and SUS?
I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type but
PurchaseOrderRequest_Out for PO transfer is not getting triggered in sxmb_moni in SRM.
Thanks in advance.
Regards,
Pawan Keshwani

Hi,
Thanks for your reply.
I have configured Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani

Requirement: Insp lot of self Certified material should not get skipped

Hi Gurus following is req pls suggest me
Requirement: Insp lot of self Certified material should not get skipped
if there is a change in Material Revision. As of now Auto Usage Decision
takes place on Self certified material Lots. This happens even after
there is a material revision. This is undesirable as QC is Not able to
ensure the implementation of design changes.
Apps

i have understood the following from ur reply
new revision created by design- purchaser creates po- materials comes in quality - auto skip
quality don't come into picture in ur scenario
solution :
new revision created by design - while creating po they will get error q info record for new revision not present- intimation to quality for creating q info record - decide whether to insp or skip it - normal process
use of q info record
in material master maintain control key for q info record.
create q info record for material, rev, plant , vendor
keep rest evertthing as it is - as a normal procedure material will be skipped
when any new rev is created - while creating po they will get error q info record for new revision not present- QC will get intimation regarding this new rev. -after all approval u can create q info record for this new rev. and then only purchaser will be allowed to create po.
make necesary chages in plan after every new revision

Material Codes - not get transaction from last 5 years

Similar Messages

Maybe you are looking for