Material issued not consumed

Dear All
Is there any report or process through which  I can get info  for Material issued but not consumed at all?
Please reply asap
Manoj

Hi,
In SAP terminology an item that is consumed is also an item that is issued and so I am confused by your requirement.
So what exactly do you mean when you say "issued but not consumed"?
Do you mean that you want to be able to see the goods movements that are NOT flagged as consumption (such as transfers, write-offs etc.)
If you can please explain it in a bit more detail we MAY be able to help.
Steve B

Similar Messages

  • Report for material  which not consumed during C015

    HI ALL,
    "I required a report for material which material are not
    consumed at C015 production confirmation time against actual consumation (order wise , part no wise & date wise )"
    its v urgent
    good suggesstion reward with valuable points.

    Amit,
    I think your problem is that you want to monitor when users are deleting the goods issue while confirmation. So you would have to know if for a confirmation qty of 100, the planned consumption should have been 100 but the actual consuption is 50.
    So you would want to relate the confirmation qty with the planned and actual consumption.
    In COOIS Remt, qty and Withdrawal qty will show the total reqmt and actual withdrwal. Hope this will not be helpful if I understand correctly.
    You have to create a simple query joining tables AFVV with RESB. Calculate the planned consuption for the confirmation qty. This along with the actual consuption will help to give what you are looking for.
    I am right ?
    Ram

  • MB1B - Bulk material issue for sub-con PO

    Hi All,
    For a subcon PO, the user has by mistake done a transfer of a bulk material using MB1B. The vendor has used this material as well. Now when i receive the material from the vendor, this bulk material is not consumed by this PO with a 543 mvt, which is normal.
    But the issue is, this item is now shown as lying with sub-contractor, & there is no way i can post a 543. I can post a 542 & reverse the issue, but then how do i treat this stock?
    Hope my question is clear, await inputs.
    Regards,
    Vivek

    Hi Vivek,
    Thanks for your explanation.
    Still I have doubts. Are you speaking of bulk material in terms of BOM?
    I haven't got experience with them BUT SAP help definetly says that bulk material is not 'withdrawn specially for the order' and 'a bulk material item is only for information'.
    http://help.sap.com/saphelp_46c/helpdata/en/b1/c043f4439a11d189410000e829fbbd/frameset.htm
    Considering this, we cannot expect consumption by mvt 543 of bulk material when GR against subcon-PO takes place.
    It's only my opinion so please think about this yourself as well.
    BR
    Csaba
    Re: Items with Bulk Indiactor in subcontracted assembly.
    http://www.sapfans.com/forums/viewtopic.php?f=9&t=289342&p=869693&hilit=bulkmaterialconsumption#p869693
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=310542&p=938766&hilit=bulk+material#p938766

  • Material Issue to cost center which are not allocated to ML

    Dear Experts,
    We have a senario, Material issue to the cost center and through activity type the cost updated in production order, Client wants when reu  CKMLCP the same should  be updated in ML, and also revaluate actual activity price and updated in cost center.
    Please help to solve the issue.
    Thank you

    Hi Nuki
    I hope this material is not price control = 3/S (standard) and also the cost center is not productive type.
    If you consume material with standard price to production cost center it will start a looping in activity calculation and at month end there will balance in this cost center.
    Well I hope I helped you.
    Regards

  • PGI not consuming packaging material from inventory

    Hi all,
    I have packaging material X with no inventory in the system. I am using this material X in a handling unit, so when I perform my goods issue, I expect it to decrease the inventory of this material by 1 unit. Since the inventory levels of this material is 0, there is no material to consume and I therefore shouldn't be allowed to post my goods issue. However this is not the case and I am able to PGI with no problems.
    How can I fix this?
    Thanks,
    Edited by: pistols123 on Nov 9, 2011 10:57 PM

    Hi,
    I've checked and the update quantity/value fields are ticked.
    I've also set 'gen pack. matl item' in my delivery type too. However when I goods issue, it is still not consuming my packaging materials from inventory.
    Does the storage location have to be HU managed?
    Edited by: pistols123 on Nov 15, 2011 10:49 PM

  • Report for Material Issued against Service Orders But not Billed.

    Hi Experts,
    For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
    My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
    Thanks in Advance,
    Abhinesh

    Hi Vivek,
    What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
    You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
    (Sorrowully I don't know which logical database would be good for you)
    BR
    Csaba

  • Issue of material should not be allowed if stock not available on that date

    All SAP Gurus,
    If we have zero stock for a material on 01.02.2009.
    We make GR on 10.02.2009.
    Now, if we try to issue the material on 01.02.2009 (after making GR on date 10.02.2009).
    Then system allows me to post the document.
    We don't want to restrict the back dated posting.
    Only we want  to restrict the posting if stock for the material is not available on that particular date (because it results in negative closing stock for that date.
    How it can be done?
    Regards,

    Hi
    Try making M7/021 message as error message and issue the material which is not there in stock.
    Thanks

  • Production Order should not be confirmed if material is not issued

    Dear All,
    Our Client has a requirement,
    While confirmation of order,system should check the material issue to production order,if material not issued confirmation should not allow.
    Please give your valuable input to fulfill this requirement.
    Thanks in advance,
    Vijay Mankar

    Hi,
    You can use this exit with reference to MB1A and MB31.
    Please refer the Documentation for the Enhancement: MBCF0002
    =======================================================
    The user exit MBCF0002 includes a function module that is called up whe
    you enter a goods movement for each item.                                                                               
    It enables you to fill in the item text in the material document item,
    depending on the following data:                                                                               
    o   MKPF     (Material document header)                                                                               
    o   MSEG     (Material document item)                                                                               
    o   VM07M    (Additional data for material document item)                                                                               
    o   DM07M    (Additional data for material document item)                                                                               
    The item text is also stored in the accounting document.                                                                               
    Examples                                                                               
    Goods receipt for a purchase order assigned to an account: since the  
    purchase order number does not contain a material number, the material
    Example of source text:                                                 
       IF I_MSEG-MATNR IS INITIAL.                                           
         E_SGTXT = I_DM07M-MAKTX.                                            
       ENDIF.                                                                               
    If the material description is to be used as the item text for all goods
    movements, the source text has the following line only:                                                                               
    E_SGTXT = I_DM07M-MAKTX.                                            
    ==============================================================
    You can refer the earlier post for some sample coding.
    You need to build your own logic for this..
    Hope this helps..
    Regards,
    Siva

  • Components were not consumed while posting the goods receipt through VL32N

    Hi Experts,
    We are into technical upgrade. We are upgrading from 4.7 to ECC 6.0. We are facing one issue. The issue is while posting the goods receipt for the subcontracting shceduling agreement through VL32N (Inbound Delivery) component materials were not consumed. While displaying the material document for the GR, could not find any compponent materials consumed with movement type 543, where as if I use the MIGO transaction code for the same inbound delivery, I could see the component materials were consumed with movement type 543.
    Could anybody tell us how to fix this issue if they come across.
    Appreciate your reply.
    Regards
    Bala

    Hi,
    Try checking below SAP notes
    Note 645119 - Problems with subcontracting using delivery
    338119 - Goods receipt in inbound delivery for SC order
    Hope this helps
    Reg
    Dheeraj

  • GATP Check in R/3 not go to APO screen for Checking & not consuming Pro. Al

    Hi
    I have Material for which the Product allocation is not being consumed. We analysed the issue is that when the sales order is created and ATP check carried out the system will do the ATP check in R/3 and will not go to APO for CTP check which in turn will not consume the Allocation. We have checked the Master data for the material which is same. Please let us know what is the seeting we have to check for the CTP check to be carried out in APO. Waiting for the response.

    Hi
    I am not asking about the configuration setting. The issue is only with this material and is working for all the materials. The material has a Planning  type X0 and is their any other settings required for the material for this.The R/3 is integrated and it is working for all the material expect for this material.

  • Problem in Material issue to WBS with movement type 261 Q

    Dear Experts,
                        I have sceario where i have to make delivery from project.But when i am issuing goods to WBS with movement type 261 Q its showing following errors.Can anyone put some light on it.
    Special stock 0001 Q  AS0111 000000000000000015 of this material does not exist
    Message no. M7076
    Diagnosis
    No special stock Q of the material (batch ) exists in storage location 0001 for AS0111 000000000000000015.
    Regards

    Hello,
    This is simple scenario. System is using 281 Q in CNS0. As you have procured through Q indicator WBS is mandatory in PO.
    So when you will take GRN , it will be consider as project stock if quality check is not there else will go in quality first. Check MBBS report for this.
    Now do CNS0 with reference to project number. So materials from project stock will get consumed when you will do PGI for CNS0 material document.
    Your scenario is failing in this stage becasue system didnt find stock against particular WBS element.
    Check this and revert.
    Keshav

  • PO number and material issued against this PO for subcontracting

    How to know the link in between the PO number and material issued against this PO for subcontracting.
    I have checked that PO history is not getting updated.
    Thanks,

    Hi,
    We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
    Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
    So when we are post goods receipt, then we will come to know the consuption quantities.
    Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
    If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
    Thansk,
    Satya.

  • How to block a material that not to creation of service notification thru-IW51

    Hi All,
    I have tried in all over areas ( MM02 level and MM06 level ) to block a material that not to create service notification with that material but didn't get a solution.If any one knows solution for this kindly provide me.
    "How to block a material that not to create a service notifcation thru IW51?"
    Best Regards,
    Narendra Konnipati

    Narendra,
    1. I do not see any possibility without using this exit. It is a very simple and effective thing for your ABAPer and you too.
    2. In case of many Materials-Notification type combinations, you can maintain similar code by joining several elseif s.
    3. Alternatively, you can maintain a Z Table as under:
    QMART
    MATNR
    S3
    10000000099999
    S3
    10000000099988
    S1
    10000000088988
    S2
    12000000088988
    Means, for every Notification type there will be one or more prohibited materials. The coding will not be difficult, but will have around 15/20 lines.Finally, if you have to get your issue resolved, I feel this is the way and also easy way through your ABAPer.
    Tell me in case of any further opinions.
    Best of Luck
    KJogeswaraRao

  • Packaging material is not appearing in the Goods receipt of STPO

    Dear All,
    We are currently dealing one Roll-Out project for one multinational company. In that from sales side, one of the main processes defined is u201CStock Transport Purchase Order processu201D. As a regular process, outbound delivery document also created with ref to STPO.
    As per the client requirement the u201CPackaging materialu201D needs to be added as additional line item in the delivery to calculate the packaging cost. This packaging material is a "Stockable and Valuated" material. So while performing the PGI the stock will get reduced from SD side.
    The problem is, using this same STPO delivery document the Goods receipt is planned to do in the another side of company code. while doing the Goods receipt system is displaying only the "Finished Product" only. The packaging material is not displaying while doing the goods receipt in the another company code.
    due to this we are not able to complete our test cycle.
    so we need the expert opinion to solve this issue.
    if the packaging material is added as additional line item while doing Goods receipt then, the problem is solved.
    Kindly suggest us...
    Regards,
    MANI
    frWe have customized that also and now u201CPackaging materialu201D is adding as a new line item in the delivery document as a non valuated material.
    But the issue is, the Billing type u201CZICu201D is not getting determined while creation of billing if u201CPackaging materialu201D is added as a new line item. If u201CPackaging materialu201D is not added as a line item then, billing type is getting determined automatically without any issue.
    We have checked in LIKP table, its containing the billing type as u201CZICu2019. But if packaging material is added then, the billing type determination is not happening.
    We are assuming that some customizing needs to be done from MM/SD point of view. I am seeking the experts help regarding this issue to solve the problem.
    Regards,
    MANI

    Dear Friends,
              Thanks for the Feedback.
    Even though it is a associated company, in one company code the packaging material stock was reduced and packed for the STPO shipment.
    After receiving the consignment, in the receiving company code they will perform the goods receipt with ref to "Outbound Delivery" document.
    Since in the outbound delivery document "Packaging material" also available. So as a business strategy we are expecting the same "packaging material" also should available for goods receipt.
    I hope i have explained with max of my knowledge to clear your doubt.

  • How to block material issuing after sales order invoiced?

    As the subject mentioned,  could be a possible to block material issuing since sales order invoiced, or
    in the another words, after the sales order completed?
    Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
    forbidden?
    Thanks in advanced,
    Zhou Zhen

    Dear Friend
    A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
    That means the order 10000 is closed
    Case 1
    Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
    This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
    Case2
    But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
    Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
    But you can test it if it throws any warning message we can try to convert that error
    But in case 2 it is not happening(even warning is not there)
    Regards
    Raja

Maybe you are looking for