Material List with Creation Date

Hi,
I want to know, since last 7 days how many material codes have been opened in my plant. There is no field in of date of creation in MM60. What should we do.
Full points to helping answers.
Thanks
GR

Similar Messages

Material list with mrp datas

hi,
My requirement is material list with MRP parameters (i.e Maximum level,Reorder points) I have checked by using T-Code MM60 but the required parameter is absent. Waiting for your help.
Thanks
Muthuraman.D
Edited by: muthuraman d on Sep 15, 2010 4:03 PM

Use tx SE16/SE16N and table MARC.
Regards,
Nick

Material List with ABC indicator

Hi,
I want the Material List with ABC indicator with Monthly Consumption.
How can I capture that data.. Any Transaction in SAP.
Thanks..

Hi
Run the tcode MC40,with necessary input parameters.
Inside the report you will be seeing the list of materials with their old as well as new ABC indicators .Now select the material and click on the double-line item .Here u can see the consumption quantity and value for the input period
Regards
Sandeep

Pending Routing or BOM material list with material in MARA table

I want to tally the material codes in MARA table with the materials without routing and BOM . i.e. pending Routing or BOM material list with material in MARA table.
Before MRP run How we will get this list ?
Pl' give reply.
Thanks .
Regards.

Hi Kishore,
SAP does not have any standard reports to suite your requirement. What i would suggest is to take couple of data extract from table to validate.
1. First dowload all materials which should have "BOM" and "Routing". This you can do by extracting "MARC" table data where field "BESKZ = 'E' or 'X' ".
2. Now you can extract the data from "MAST" for BOM and "MAPL" for Routing details.
Now do VLOOK up in excel to find the mismatch data.
This can also be done by a customised program, which i dont think it is required since it is going to be used only once.
You could also try SQVI with table joins
Hope this helps...Reward your points if so,
Regards,
Prasobh

Automator- create file names with creation date and time

I have photo files that I want to rename with a base name, plus a sequential number, based on the creation date (and ideally time). It appears that Automator does not honor the time of the source file when date stamping a new set of files. If there is anyway to use date + time so I can recreate a date_timestamp in addition to a base filename, that would be great.

Hi Nikhil_BI_Dev,
According to your description, you find your report runs properly in BIDS but shows blank after deploying onto report server. Right?
In this scenario, it might be the issue on retrieving data in SQL 2005. Here is a thread with same issue, please refer to the link below:
Detail report is blank after deploying
Reference:
Using SQL Server 2005 Reporting Services with SQL Server 2005 Express Edition
If you have any question, please feel fee to ask.
Best Regards,
Simon Hou

Import photos from iPhone with creation date

I am trying to copy pictures from my iPhone to my MacBook Pro while keeping the creation date. Each time I try to copy them over, the creation date is changed to the import date. I have read that there are 3rd party applicaitons to help with this or I can manually change the dates. Unforunately, I have a TON of pictures that I move from my iPhone. I am new to the MacBook world so any help is appreciated!

You most likely can't, as such is not supported by Apple.

PR list with release date report..?

Hi all
Where we aill get the report of PR list with PR released date .
Thanks
sapmm

hi,
You can get the list of PR's from ME5A or from table EBAN etc...
BUt its not possible to get the exact release date...
It a biggest drawback..
Regards
Priyanka.P

How to Export from iPhoto 6 with Creation Date

I frequently need to share photos with friends, by burning a CD of the images. But whenever I do this, the photos are labeled with the date of export instead of the creation date, so if the friend wants to view a slide show of the photos in sequence of time, they can't do it.
Is there a way, within the Mac, without plugins or additional software, to fix this, say an Automator action to change the file's date to the date/time the photo was made?
Thanks!

Daver:
Do a Batch Change on those you're exporting using the Title to Date/Time (you can deselect the time later in the process. Then export the files to the desktop using the Use Title option. That will give you 12/2/06-1.jpg, etc. as the new file name.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar

List with user data from User Profile Service

Hi there!
I got SP intranet site up and running with more then 2000+ users on it.
User Profile Services is getting users attributes from Active Directory.
How can i make a list with all of those users and columns like Department, Manager, Office number, etc..
After that i'm going to apply a filter by current user department.
I would really appreciate some offer.
Thanks!

There is a sharepoint hidden list called User Information List , if you want to filter by current user department I recommend that you use ser search API and search People using SourceID
public static ResultTable SearchUsers(string query,int limit,string [] selectproperties)
KeywordQuery kq = new KeywordQuery(SPContext.Current.Site);
//select properties
foreach (string property in selectproperties)
kq.SelectProperties.Add(property);
kq.SourceId = new Guid("B09A7990-05EA-4AF9-81EF-EDFAB16C4E31");
kq.QueryText = query;
kq.RowLimit = limit;
ResultTableCollection results = new SearchExecutor().ExecuteQuery(kq);
return results.Filter("TableType", KnownTableTypes.RelevantResults).FirstOrDefault<ResultTable>();
you need to pass the query Department:CurrentUserDepartment and to get current user department
UserProfileManager manager = new UserProfileManager(SPServiceContext.GetContext(SPContext.Current.Site));
UserProfile currentUser = manager.GetUserProfile(SPContext.Current.Web.CurrentUser.LoginName);
string department=currentUser["Department"].toString();
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

Refreshing CRM's Account and Contact list with new data

Hi Folks, I am very new to CRM and was tasked with a new job of refreshing our CRM's account and contact listing.
We get a new list in Excel every now or so from a commercial vendor that compiles list of companies and key contacts and sends it out to subscribers.
I cleaned out this Excel data so there is a:
1) Contact List
2) Account List
3) Contact + Account
that can be directly mapped to fields in CRM.
What I need to do is, make sure none of our existing data is deleted. If there is a matching account (eg. company A) then only the phone no, address, website will be updated. If there is a matching contact again do the same.
If there is no matching account in CRM, then create new account and all corresponding contacts.
Anyone done something similar, can you please suggest the optimal way to go around this? Thank.

Hi
When you do an import in On demand , you can select the appropriate choice in the Step 1 of your import wizard.
you can select to import the account with the on demand predefined fields where in you can import via account and location.
In case when duplicate is found you can opt for a overwrite of existing records and when no duplicate is found then you can ask for a new record creation.
the same way you can do for contacts.
By this method you can be sure that records are not lost and new records are created if there is no existing record.\
hope this helps.
-MR

Oracle Materialized view with xmltype data type

this the table having in db1 i need to create materialized view db2 for this table i have followed below steps..
create table WORKSHEETMASTER
METHODID NUMBER(10),
WORKSHEETCODE VARCHAR2(50 BYTE) not null,
WORKSHEET SYS.XMLTYPE);
create materialized view log on db1.WORKSHEETMASTER;
db2
CREATE MATERIALIZED VIEW WORKSHEETMASTER
REFRESH FAST ON DEMAND
AS
SELECT METHODID,
WORKSHEETCODE,
worksheet FROM db1.WORKSHEETMASTER@DBLINK;
when i was create materialized view above script in db2 iam getting error
ORA-22992:cannot use LOB locators selected from remote tables
like this when remove the worksheet column created succesfully may know how achieve this problem
my database version 11g iam searched some sceniour not full filled
need for help
thanks

this the table having with in DB1
create table WORKSHEETMASTER
METHODID NUMBER(10),
WORKSHEETCODE VARCHAR2(50 BYTE) not null,
WORKSHEET SYS.XMLTYPE,
WORKSHEETID NUMBER primary key,
CREATEDDATE DATE,
CREATEDBY VARCHAR2(50 BYTE),
WORKSHEETNAME VARCHAR2(50 BYTE),
UPDATEDDATE DATE,
UPDATEDBY VARCHAR2(50 BYTE),
NOOFROWS NUMBER(3),
NOOFCOLUMNS NUMBER(3),
WORKSHEETTYPE CHAR(1 BYTE),
SUBSTRATEUSED VARCHAR2(50 BYTE),
STATUS NUMBER(1),
APPROVEDBY VARCHAR2(50 BYTE),
APPROVED CHAR(1 BYTE) default 'N',
APPROVALREMARKS VARCHAR2(100 BYTE),
LNG_WORKSHEETNAME VARCHAR2(50)
iam trying to create materailzed view in db2
create materialized view WORKSHEETMASTER
refresh fast on demand
as
SELECT METHODID,
WORKSHEETCODE,
WORKSHEETID,
worksheet,
CREATEDDATE,
CREATEDBY,
WORKSHEETNAME,
UPDATEDDATE,
UPDATEDBY,
NOOFROWS,
NOOFCOLUMNS ,
WORKSHEETTYPE,
SUBSTRATEUSED,
STATUS,
APPROVEDBY,
APPROVED,
APPROVALREMARKS,
LNG_WORKSHEETNAME FROM db1.WORKSHEETMASTER@DBLINK; --remote database
iam creating above scriprt in db2 getting error this my total script

How to auto populate a column/SharePoint list with Current Date?

I have a SharePoint list and I created a column called ‘CurrDate’.
I need this column to;
Display the current date,
Auto populate all rows with the current date in the SharePoint list
Dynamically update with the current date
I first tried creating the column using the default SharePoint interface Date Time but it’s not doing any of the steps listed above:
I even tried entering =[Today] in the Calculated Value field.
Still nothing…
So, I’m sure you will toss out a code snippet to make this work, which is great.
However, I’m a total noob with SPD, where the heck do I insert this snippet?
Always in need of help.

Hi ,
I understand that you want to add a column to a list to hold current date. Here is a workaround:
Add a single line of text column to the list. Name the list as Today.
Add a calculated column to the list. Use the [Today] as the formula. Set the calculated column to be Date and Time type.
Delete the Today column from the list.
Thanks,
Entan Ming
TechNet Subscriber Support in forum
If you have any feedback on our support, please [email protected]
Entan Ming
TechNet Community Support

Re:material list with GL account

Hi All,
i have the requirement below.
how can i get the report material with Gl account.
Thanks & Regards
siva

Dear Mr Siva,
Please view link below;
http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports
You can use the Transaction ME2K and in dynamic selection for A/C category select the G/L account field and make it not equal to blank (by clicking in the field) and then enter the all cost center or whatever A/C object you are looking for in the field and run the report you will get list of all PO has the G/L account. Whereas in KSB1 report give the information about the PO for which some material document already posted. I mean to say, KSB1 include those PO which have PO history is present. what about those po for which no GR or IR has done. It may come in commitment report that is in KSB2.
Believe this could help you. TQ
rgds,
nantha

Materialized view with xmltype data type

Hello to all,
I have a challenge with my 10g r2 database. I need to make a materialized view from a table in this format:
Name Null? Type
RECID NOT NULL VARCHAR2(200)
XMLRECORD XMLTYPE
,my problem is that (as i read from docs) i cant make the view refreshable on commit and also i cant refresh the mv in fast mode ( i dont need to refresh mv complete - takes too long).
Do you have a hint for this?
Thank you in advance.
Daniel

hi,
I cant upgrade to 11g.Also i cant change the table structure.
Here is a sample of xmltype field content:
RECID XMLRECORD
D00009999 <row id='D100009999'><c2>10000</c2><c3>xxxxx</c3><c5>xxxx..
And i need to extract in the mv the data from c2, c3 and so on.
Still waiting for a hint.
Thank you.

Refresh fails on materialized view with CLOB data type

Hi,
Hope somebody can help me with this issue.
Some materialized views get status broken on refreshment, but only sometime. When I try to refresh them manually I get following message: "ORA-01400: cannot insert NULL into...". But I know for sure that there are no NULL values in the master table, MV and master tables are declared in the same way and all columns in master tables are NOT NULL columns. Another ting is that this error I get only on columns with data type CLOB.
Please, help!
/Julia

hi,
I cant upgrade to 11g.Also i cant change the table structure.
Here is a sample of xmltype field content:
RECID XMLRECORD
D00009999 <row id='D100009999'><c2>10000</c2><c3>xxxxx</c3><c5>xxxx..
And i need to extract in the mv the data from c2, c3 and so on.
Still waiting for a hint.
Thank you.

Material List with Creation Date

Similar Messages

Maybe you are looking for