Mavericks and Dual Display not working as documented

Hi all. Ok..something a little wierder here for my dual display scenario. I have two Samsung Syncmaster 2443 monitors. 15" MBP Retina purchased this year. Running in Clamshell Mode.
I can get dual monitors happening (extended) but I cannot get the menu bar to come over as well. As mentioned in other posts, I need to tick the box in Mission Control "Displays have seperate spaces". The only problem is, that particular menu item is NOT there. All I have is the other 4 items. So how is it that this menu item does not exist on my installation?
In this current setup, each time I reboot the display's also get reveresed, which is really annoying. I have to reboot twice to get back to my original layout.
Any idea's?
Tks

you're faking out your machine to THINK it has 2 real displays and you expect Keynote to work? Keynote is THE most intense app I've ever seen for screen drawing. It basically takes over your entire machine to do its work. It doesn't surprise me that that trick doesn't work with it.
My guess is you're going to have to wait till you have the actual projector and adapter to test your dual screen setup.

Similar Messages

Wacom intros5 and dual monitors not working

I know there are issues with Mavericks, dual monitors & USB, but I have a problem with my Intuos5 tablet: since installing Mavericks it no longer maps to both monitors. Changing settings under monitors and wacom sys prefs does not change anything. It will only map to monitor 1.
in fact mapping under the wacom sys prefs doesn't seem to work at all.
Any ideas other than going back to ML or waiting for a new driver?
Anyone seen behaviour like this?
Thanks

The hatter wrote:
You realize you do need graphic driver, and Nvidia has Windows 7 (32/64), and ATI is suppose to have a universal driver. No mention of what your card is. And I would hope x64.
Good grief, but please a) don't use Apple drivers, b) always use the "troubleshoot compatibility" for any installer (control+click on the application) before running. Apple is treated as not supported and won't install (now) with build 7077 (after feedback finding it causes errors, love the way their feedback and testing really does work).
Boot Camp can 'doorstop' in some cases a good installation.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0
Use Driver Sweeper and then reinstall the latest compatible driver. And no, dual monitors does work.
mine is the ati radeon 2600 hd xt and it worked flawlessly up until about 2-4 days ago,
oh well, xp pro it is then,
i dont want the headache of dealing with windows 7 beta!
xp should be fine to use correct?
will there be any other steps i will need to take in order for everything to function together well?
thanks

Laptop Built In Display and External Display not Working

Hi all, I have a HP Envy M6-1158ca, and recently my Built-in display stopped working. I plugged it into an external display via HDMI and it showed no input. It seems as though the laptop is not booting into Windows either, as usually whenever my laptop boots into windows, the fingerprint scanner blinks letting me know I can now sign in using it. I am extremly frustrated with this, and have an unbelieveable amount of stress because this was my only PC. Please respond as soon as possible, it would be much appreciated.
Thanks in advance.
This question was solved.
View Solution.

Yes.. i think thats what might have damaged it...Notebook should always be completely powered off with the battery out and ac adapter disconnected while replacing any internal hardware..
Shouldnt be a BIOS problem....but still you can check this link..
Restoring the BIOS
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Mavericks and Android Sync - Not working

How do I sync my contacts, calendar and mail with my new Android device?
1. Have a gmail account - its set up on the droid and in OSX
2. I've tried the standard stuff recommended - not working.
I need everything to sync in the cloud like with iCloud.
I'm pretty good with this stuff - not sure why its not working.
David

David.Katz wrote:
Thanks!
I'm gonna try this and let you know how it goes.
Question: Is there a way not to go 3rd party on this?
David
Buy an iPhone, everything else is 3rd party, including your Android phone.
SmoothSync works, that's your route.

Cs6 and retina display not working well together please help

I just purchased a membership for creative cloud and installed photoshop and illustrator on a new retina display mac book pro. The interfaces look pixelated including the artboards. All updates are current.
I read that adobe latest updates are optimized for retina display. I have no idea what went wrong.
Thanks for your time

Ask in the product forums for specifics. As a start, check the applications using File --> Get Info on teh executables. Verify, that not accidentally half res/ low DPI mode is enabled. Also check in the "About" info that you actualyl have PS 13.1 and AI 11.2, not the base install. Run the updater to obtain those latest free updated versions.
Mylenium

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I started to download Maverick but then read that Word and Excel do not work with Maverick. I hit pause on the download. How do I stop the download. In non technical terms please!

How do I stop the download of Maverick on my MacBookPro? I started downloading then discovered that 2008 Word and Excel do not work with Maverick. I have too many files in the 2008 version to upgrade them at this time. I just need instructions in non technical terms to stop the Maverick download.

I did the same as Tapmr and have paused the "upgrade". So am I to understand that the upgrade only downloads and will not automatically install it? I am an extreme novice here, and cannot afford any issues after I upgrade/download. I don't know how to make a clone copy as you suggested either.
I need assurance that if the upgrade is allowed to continue that I will be able to delete the upgrade downloaded and continue on as before with my regular system.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

20inch cinema display not working via ADC?

Heres the specs on my Mac
Dual 450mhz Gigabit Ethernet Model
OS X 10.3.9
1.38GB SDRAM
ATI 128 video card -----> now nvidia GeForce 4 MX
The Story:
I have had my G4 since it was new. I bought it with the 17" Studio Display and it has worked fine. and still works fine with both video cards mentioned above. I bought a used 20" Cinema Display. I saw the display working off an ADC connection before I even paid the guy. I brought the monitor home and tried it out. It loaded to the grey apple screen and then went blank. After some research I found out the ATI 128 only supports up to 17" display. So I got a nVidia GeForce4 MX, put it in my machine, fired it up and I get NO DISPLAY AT ALL! I plugged the 17" back in and it works just fine.
Also the guy I purchased it with threw in the apple DVI to ADC adapter, so I plugged the monitor into my Powerbook 1.33mhz and everything works just fine in mirror and dual display modes.
I am stumped. Can anyone help?
Thanks,
Jus

Hey guys,
I don't know if this will help, but here goes. I bought my 20" Cinema Display with the first G5s to come out ~ 9/2003. Lightning came in on my G5 thru the ethernet port and it wouldn't boot up. Frustrated, I unhooked everything and let the setup sit.
About a month ago I bought a G4 off ebay. It had a video card that had a DVI and VGA port--I guess it was an aftermarket upgrade. I was itching to try my 20" Cinema Display on it. So I bought the Apple DVI to ADC adapter ($99 thing). Hooked it up and sweet, screen real estate for days!
Came home a couple of days later, woke the G4 from sleep, and the Cinema Display stayed blank....f*!
I was p**d! I spent nearly $1200 for the thing, plus $99 for the adapter. I tried unplugging and plugging the adapter/display/G4 per the adapter instructions, still blank screen.
Well, today I had 3 different 22" LCDs in my newegg.com shopping cart and was ready to fork out $200-$300 for a new LCD with a DVI connection. I was convinced it was the adapter. So I thought I would try to hook the setup up 1 more time before I pulled out my debit card. I looked at the instructions again, and noticed apple pictured plugging the power cord into the adapter box first, then plugging the power cord coming from the adapter into the power source, then plugging the display into the adapter box, then plug the DVI cord from the adapter into the G4s video card (DVI-I port), then finally plug the USB cord from the adapter into the G4.
I powered up, and low and behold, I worked!!!
I'm typing this post on my 20" Cinema Display right now.
Only two things I can figure is setting the G4 and display to sleep is no good. The display and/or adapter seems not to work well with the sleep function. So I set System Preferences to never sleep for the display and the G4. Second, could there be a sensor where the power cord plugs into the adapter box? That's the only step I did different this time.
Sorry so long winded but if I can help out i want to 'cause I know how frustrated and sick I was about a having a kickin' $1200 display on the blink.
It could be just a coincidence, I'll repost if the Display goes blank again.
peace,
Danny

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner

HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner.
I installed drivers and software from the HP website. Printer works fine but scaner does not work over WiFi. I did not try over USB because printer and computer are not in same room.

Hi @mamedina ,
I see that you are not able to scan over the wireless network. I would like to help you resolve this issue.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Deskjet 4645)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
I have provided a document to make sure the Scan to Computer is enabled. You will have to select 10.8, then Network Connection. A 'No Computer Detected' or 'Connection Error' Message Displays When Scanning for HP Officejet 4610 ...
If you are still not able to scan, then I would connect the printer to the computer by a USB cable to see if it is a network issue or the scan port might be blocked on the router. Unfortunately the printer isn't accessible in the same room, but this will rule out a software issue or a network issue. You can contact the router company to check and open these ports 9220/9500/427 on the router for scanning.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mavericks and Dual Display not working as documented

Similar Messages

Maybe you are looking for