MBA and reading SDHC cards?

Can the mid 2011 MBA's read SDHC cards as opposed to the normal SD cards? I know the MB Pros can. It's not listed in the specs but it could have been overlooked. thanks.

I think this may help, but note it only discusses iMacs and MacBook Pros.  No Airs.  I would guess the specs are the same though.
http://support.apple.com/kb/HT3553

Similar Messages

  • Does the SD - X D slot on HP C410c PREMIUM FAX AIO Printer recognize and read SDHC and SDXC cards?

    Does the SD - X D slot on  HP C410c PREMIUM FAX AIO Printer recognize and read SDHC and SDXC cards? 

    Does the SD - X D slot on  HP C410c PREMIUM FAX AIO Printer recognize and read SDHC and SDXC cards? 

  • HT4764 can't read SDHC cards

    My MacBook Pro can't read the SDHC cards. What should I do???
    Please help me.....

    Hi
    Can you notice yellow exclamation mark in device manager?
    Normally the Satellite L40 can read SDHC cards up to 8GB so my question is have you tried different brands of SDHC cards?
    I have good experience with Kingston and SanDisk cards.
    Furthermore you should check the Toshiba website for an update of the card reader:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Last but not least have you installed all Service Packs and Updates for Windows?

  • Imac failing to read SDHC card

    I cannot get my imac to read sdhc cards and any forum discussions are too old for Mountain Lion.  And I'm as up-to-date with the software as it's possible to be.
    Help!

    it should I have no problems
    it could be 1 of 2 things
    1. the card is formated with a filesystem osx don't read or write
    2. the card is corrupt and need a format

  • HP Photosmart C3180, is there a driver that will enable this printer to read sdhc cards

    HP Photosmart C3180 all in one printer. is there a driver that will enable this printer to read SDHC cards.

    This is a limitation of the USB hardware on the C3180 which will not read SDHC cards.
    Maximum recommended memory card size: 1 GB (solid state only)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Does my macbook pro mid 2009 read SDHC cards in the card reader?

    does my macbook pro mid 2009 read SDHC cards in the card reader?

    If you have an SD slot on the left side of your MBP it reads SDHC cards.

  • Read SDHC card in 10.3.9

    how can i read a SDHC card in 10.3.9 G4 power book?
    I try to use exress card reder, but not work
    thanks

    Hi, tm001. You'll need to buy a card reader whose manufacturer guarantees its compatibility with the new SDHC card standard. Many older readers and other devices that can handle 1GB and smaller SD cards easily are incompatible with SDHC cards.

  • Lenovo G480 unable to read SDHC card

    Hi 
     I having an issue with my G480 unable to detect my SDHC card. I have install both drivers for my card reader from Support site but still unable to read my SDHC card even my camera can use the same SDHC.
    Any one have similar issue?
    Solved!
    Go to Solution.

    hi mynorkin,
    If you have the Lenovo G480 (type 2184 or 2688) as listed in this pdf data sheet, this doesn't support SDHC (Secure Digital High Capacity) as the card reader installed on these system is only a 2-in-1 reader which only supports MMC and Secure Digital Card,
    As an alternative, you can get a USB Card Reader.
    Edit: Added sample usb card reader.
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My MacBook Pro won't read SDHC card what can i do?

    I have a MacBook Pro of 2010 running OS X Mavericks 10.9.2, when i insert my Samsung SDHC card (8Gb) it doesn't show up on finder or disck utility, but when i go to system information - card reader it shows there. When i insert my normal Samsung SD card (32Gb) it initiate with no problem... i have some pics on this card that i don't wanna loose, what can i do to fix it?

    Check and see if it's under warranty.
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If it is, take it to the Apple store, they'll run diagnostics and replace the battery if necessary.
    If it's not under warranty and/or passes diagnostics, you may have software issue that's draining your battery, which could be solved by finding and removing the software. But I'd start with the warranty.

  • N95 and 4Gb SDHC cards

    Fully compatible out of the box it seems which was a suprise to me! They specifically tested in in a N95.
    Click here for The Register's review of the card
    Useful links: Phone firmware update | Nokia support site

    Calm down folks. "The Register" reviewed a pre-release model which means the cards are probably about 2 months away from public release so you still have a while to wait yet. ;-)
    It would appear the version 10.x firmware has the support for FAT32 so most N95's should work out of the box. RAM will not be a concern but reading the card will obviously take a lot longer as it has a fair number of allocation addresses to take in now. Still I don't think the performance will be slow in any way, we are probably talking microseconds.
    Useful links: Phone firmware update | Nokia support site

  • Mass storage transfer speeds and 4GB SDHC card

    I got a new 4GB SanDisk Micro SDHC to use with my Nokia N95. The transfer times using USB mass storage are horrific (USB 1.0 or worse I think). For example, it takes 9 minutes to delete 280MB worth of maps off the card. Another example is scanning for the Music Library - it used to be almost instantaneous, but now the songs are found so slow I can see each and every single number change.
    Is this happening because SDHC is not officially supported by the firmware? The card is recognized just fine, but it is just slow in every way imaginable.

    Just found out that regular MicroSD is FAT16, while MicroSD SDHC is FAT32. Anyone think that the support for FAT32 is either broken or crippled or not officially supported by the firmware?
    I am really bummed out. I love the high capacity, but it is just so excruciatingly slow. I guess I could get a card reader, but I'd much rather not have to take out the card everytime I want to put lots of data on it.
    So what has everyone else's experience been with transfer speeds on the N95?

  • SDHC card reader in Satellite A300-1MX?

    Hi everyone,
    i bought a Toshiba Satellite A300-1MX back in October 2008, and now i wanted to buy an SDHC card, but I was wondering whether my laptop would support this "new"-ish card. The reason I want an SDHC is because it comes in bigger volumes.
    So do you know if my laptop can read SDHC cards?
    Thanks so much,
    Sincerely,
    Alex

    The Satellite Satellite A300-1MX card reader supports these cards:
    SD Card: 8MB-2GB
    SDHC Card: 4GB-16GB
    xD picture card: 16MB-2GB
    Memory Stick: 8MB-256MB
    Memory Stick Pro: 256MB-4GB
    MultiMediaCard: 8MB-2GB
    miniSD (with adapter): 32MB-2GB
    microSD (with adapter): 512MB-4GB
    Memory Stick Pro Duo(with adapter): 256MB-4GB
    As you see the SDHC is supported

  • Satellite M110 PSMBOA - Does it read 8GB or 16GB SDHC cards

    Does anyone know if this model with Windows XP home SP3 can read SDHC cards in particular 8GB or 16GB SD cards?
    Or does anyone know if there is a driver update or firmwire update that will allow this card reader to read these types of cards
    thanks

    Hi
    What does the user manual said?
    Did you check this?
    For me it looks like Toshiba Australian notebook series.
    I searched in the manual which Ive found on the Toshiba Australian page and it says that these cards are supported:
    *SD* 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB, 2GB
    *MMC* 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB
    *MS* 8MB, 16MB, 32MB, 64MB, 128MB
    *MS Pro* 256MB, 512MB, 1GB, 2GB, 4GB
    *xD* 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB, 2GB
    As you see the SDHC cards are NOT supported.

  • MacBook Pro won't read Sandisk SDHC cards since Lion 10.7.1 update

    Hi all, just wondering if anyone else has had this problem. I know there are dozens of posts about SD cards not working with MacBook pros, but mine seems to have started when I installed the latest Lion update.
    I have a high-end 13" early 2011 MBP and the cards I'm having trouble with are all Sandisk 4GB SDHC. Two are 'Extreme III's" and one is an Extreme II. The card reader is showing up in System Profiler, and a really old 2GB Sandisk card gets read fine, so there doesn't seem to be anything wrong with the MBP hardware.
    Similarly, I can read the cards fine via a USB adapter, so it's not the cards that are causing the problem.
    I had successfully imported photos from the cards before upgrading to Lion, and also before installing the 10.7.1 update. So, it looks like the problem may be linked with the update, but this is purely an educated guess.
    I've tried resetting the SMC to no avail.
    Has anyone else experienced something like this?

    I've got the same problem. I've got a late 2010 MacBook Pro unibody running Mac OS 10.7.1 on it. I installed the 10.7.1 updated most likely on 8/17/11 the day after it was released by Apple. Since then I was able to read SDHC cards as I shot a number of photos and videos to my cards and they worked fine.
    I'm not sure what has changed since then, it wasn't as simple as the 10.7.1 update then it didn't work. This is the problem I'm having below, just started to experience this on 9/2/11. I tested with two 32GB SDHC cards, one 16GB SDHC card and one 2GB SD card. All cards were manufactured by Transcend.
    FAIL:
    * SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via the built-in SD card slot
    * SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via SanDisk 2.0 card reader connected via a short USB cable.
    * If I put any SDHC card into a SanDisk USB 2.0 reader that is connected to my USB hub (I gave it a try in case there was a power problem with the MBP USB system) the card is not recognized either.
    * Even Disk Utility will not see the card when inserted via built-in card slot or a reader.
    SUCCESS:
    * SD cards (2GB) mount fine when inserted either in the built-in SD card slot or via my SanDisk USB 2.0 reader.
    * If I leave the SDHC card in my camera (Canon 60D) and connect the camera to my MBP via USB I can import the images via Aperture.
    * If I put the SDHC card into the memory card slot reader of my HP inkjet printer (it has multiple card slots for different types) the card will mount normally like it is supposed to via the two failed methods above.
    I'm also sending this info to Apple but wanted to post here since there are three inconvenient work-arounds.

  • Zen Audible and SDHC card prob

    Hello:
    I am having a problem using my Zen 6 GB player and Audible / SDHC cards. I know that Audible can only play content from the player's main memory, and that is where I have my books. The player locks up whenever I switch from Audible, and try to access any media files on an SDHC card. I have tried (2) different 8GB SDHC crads (PNY, and Sandisk).
    I have tried different firmware versions, and different Audible compression settings, in fact it took me a while to identify Audible as the culprit, but I am sure it is, because I can access the media files on the SDHC?otherwise.
    ?Any ideas?
    Thanks

    well, here's the list of supported cards (but it's not limited to only these models!!):
    http://www.creative.com/products/mp3/zen/?nav=sdcard
    i don't think smaller/bigger speed should make any problems, the problem is that some models may not work. you better test your card in the player before buying it.

Maybe you are looking for

  • Scanning with HP

    Is there an HP scan utility / download that I am missing? Perhaps something else? 1) I installed OS X 10.6.4 via installation disk. 2) When I installed it, I chose NOT to install the printer drivers and NOT to install printer drivers for printers clo

  • How To Process an XML File

    Hi All Clasic ASP MySQL Win 2K Server I have an XML file that is uploaded from clients via a browser which contains job data. Once uploaded I need to process it into a MySQL DB using classic ASP. The file contains 3 lots of elements under the main jo

  • Oracle Application Server Control Console doesn't show any servers

    Hi there. I'm configuring the Identity Manager, and in the process of doing so, I've to user tthe OASCC to do some operations. I've discovered how to launch the OASCC and I can access it. The problem is that after configuring the ias_admin password t

  • What chokes H.264 footage: data rate or video dimensions?

    I apologize for posting in here but this board is SO much better than the Quicktime or Compressor boards, and it's all the same workflow anyhow! What I'm wondering is what chokes H.264 videos. Is it low bit rates? High bit rates? Big dimensions? I ha

  • My phone is stuck on the loading bar

    my torch 9810 is stuck on the loading bar i have tried the safe mode and it didnt work and i wanted to know if there is any other thing i can do..........its been 2 days without my phone and its hell.......i need all my contacts someone help me plz