MD04 message 52: No BOM selected

In MD04 I get this
52: No BOM selected (S2)
Message no. MD408
What could be the problem?
This is a E 50 material. I checked the BOM structure and validity. No problem with those.

Hi All,
Checked following before I posted this question and there are no problems with them:
BOM usage: 1
BOM status: 1
Valid from: September 2011
Lot Size for BOM and routing: 1
No deletion flags are turned on for BOM, material and components
BOM item Production relevant: yes
BOM materials are of same plant
Rerun MRP: yes... does not help. quantity of VSEB and plan orders can change but the message 52 still remains and does not explode.
This is only happening in my QAS system... production system with same material and information is ok.

Similar Messages

Exception Error Message (52) No Bom selected

Hi
a) I have created a simple 2 layer BOM ( level 0,1,2)
When I execute MRP run, I get the expection message - NO BOM SELECTED ( 52) for the 2nd level material.
Please advise.
Parthasarathy

Hi All,
Checked following before I posted this question and there are no problems with them:
BOM usage: 1
BOM status: 1
Valid from: September 2011
Lot Size for BOM and routing: 1
No deletion flags are turned on for BOM, material and components
BOM item Production relevant: yes
BOM materials are of same plant
Rerun MRP: yes... does not help. quantity of VSEB and plan orders can change but the message 52 still remains and does not explode.
This is only happening in my QAS system... production system with same material and information is ok.

Exception message"no BOM selected"

Hi Experts,
In what circumstances is the above error message i.e. "no BOM selected" thrown ? When I am running MD02 for a FG, I am getting this message. This FG has only one SFG as it's component in the BOM. Production version for FG exists. The SFG has no BOM/production version. How can i avoid this message and what all does it imply? Please suggest.
Regards
Sm.

The possible reasons for " No BOM Selected " Exception M,essage 52 could be
1. Validity period of BOM
2. BOM Status (should be active for MRP.)
3. BOM Components should be relevant to production.
4. Check whether you have defined the selection ID for the priority of BOM Usage in SPRO define order of priority of
BOM Usage.
Thanks,
nandha

How to Create new Message Control for BOM

Dear Experts,
My question is , we have Set Deletion flag for BOM of some material, When we go to make Production Order. it is showing an warning message , I want to set Error message,instead of warning message . can you all plz tell me how to do it in conflig.
I have tried following settings , but it allows me to change it, but not to create a new message no
IMG, Production, Basic data, Bill of material, General Data, Change Message type
Thank you for your time.

Hi,
For OPJB, execute.
Click on 'New entries'.
Enter version as 000, application area (the first two digits of the message no, for BOM it would be CO I guess), & message no.
Press enter. Under category maintain as E i.e. error.
For SE91, execute.
In message class enter the first two digits of the message, under subobjetcs, enter the message number & clcik on 'where used list icon' in extreme left.
A dialogue box will apeear, select programme & classes. Click on right mark i.e. execute.
A list of programmes will displayed.
Select the relevant programme & clcik on change.
Change the warning into error there. Please note that you need access key & need ABAP consultant to do the same.
Hope this helps you.
SmanS

LTP with BOM selection ID

Hi
I have created LTP scenarios by using the BOM selection id with usage 6. The two alternate BOM 7 and 8 are assigned with the above usage. Alternate 7 BOM having active status till 31.12.2007 and alternate BOM 8 is active from 01.01.2008 till 31.12.9999.
Means for year 2007 I want to use alternate 7 and alternate 8 will be use for Year 2008.
After running the LTP the planned orders are exploding the BOM for 2007 only but for 2008 there is no BOM selected. I have checked the material master, BOM selection is 1 (by explosion date).
Kindly help me to get the alternate BOM 8 for year 2008.
Thanks and Regards
Vinay Thakre

Hi nanda
In OS32 I have maintain 2 line one for alternate 7 with effective from 01.01.2007 and for alternate 8 is from 01.01.2008.
After running the LTP alternate 7 exploded for period 2007 but for period 2008 No BOM explosion.
Thanks adn Regards
Vinay Thakre
Message was edited by:
Vinay Thakre

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

Manual BOM selection at the time of order creation

Dear Experts,
Could you help me to understand if there is any provision to select BOM by user at the time of order creation without the help of production version.Is there any configuration required to make BOM selected manually.
Regards,
Krishna Mohan

Hi karishna,
Please go to T-code OPL8 and in production version use( 1 )Manual selection of production version. Then user can select manually instead of automatic selection.
Regards
Muhammad Umar

BOM selection in sales order

hello, friends.
when selecting the BOM in the sales order, the selection screen displays alternative BOMs for 1 usage type only, and will show the other usages one at a time only if the first type does not exist. the sequence depends on the priorities (access sequence) set in IMG, and settings in item category.
my questions are:
1. does the 'next page' button in the selection screen refer to additional BOMs of the only same usage type?
2. is it possible to show other usage types in the same selection screen? if yes, where do we configure this
many thanks for your inputs.

hello, Rags.
actually, BOM selection is working fine for us. my question was more of a theoretical one. to clarify the issue, let me cite an example:
1. for material A001, i create 5 alternative BOMs.
2. of these 5 BOMs, 3 have usage type SD, and 2 have usage type Production.
3. when you enter your BOM header material in the sales order, a selection screen will appear. because of the priorities set in IMG, it will show you only the 3 alternate BOMs of the SD usage type.
3. the system will display the 2 other production BOMs only if there are no SD usage BOMs or if these have been deactivated, or if you change the order of priority in IMG.
4. you cannot change the usage type in the BOM selection screen because this field is not available for input. there are "next page" buttons, and i'm wondering if this is or is not just for long lists of alternate BOMs with a single usage type.
my question: is it possible to show all 5 BOMs regardless of usage in the same list, or in different pages?
many thanks.
Edited by: jonathan y on Apr 3, 2009 7:55 PM

*URGENT -Alternate BOM selection in MRP*

Dear gurus
I have an urgent requirement regarding alternate bom selection.
our scenarion is complete subcontracting and no production versions are maintained and for suppose i have a product X which has 3 alternative boms during the sales order creation iam able to select the required alternative but during the mrp run the system is selecting the alternative "1" by default.I want that during the mrp run also the system should explode the bom which i have selected during the sales order creation not the alternate "1".
please reply.
regards
Kumar

Dear Dharma
in my previous post I havent got suitable reply from my previous post so i have posted again waiting for answers.
regards
Kumar

Automatic BOM Selection as per Stock availability

Hi...
I have a query.....How can i set an Automatic BOM selection as per stock availability
Problem is that the client is having more than 1 type of raw material which can be used, so the user needs to consume the ROH as per the stock availability, in that case he has to manualy check and amend the Production Order accordingly.
Hence, i want to set a system wherein the system would do the checking of the ROH material and then select that material and execute the production order accordinly.
Requesting your valuable inputs.
Thanks in advance,
Harris

Harris,
Please explore the possibility of defining "Alternative Item Group", in the BOM Item level details(Basic data tab).
From Application help for your referance,
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Regards,
Prasobh

Adding a message to the variable selection screen

Hi there
I have been asked to find a way to add a message to the variable selection screen.
It appears that DIVISION needs to be added to the selection screen, as this makes the query run faster. However, they don't actually want the user to enter a division, as this causes other problems.
So, ideally, I would be able to add a message to the variable selection screen that advises users against entering a value for division.
I don't know how to do this.
I create the web template, and I can therefore add messages or anything you like to the template, but I don't believe I have any control over the variable selection screen.
Does anyone know if this is possible?
We are running a 2004s system if that helps.
Cheers,
Andrew

Hello,
Well i think if you make the variable used for division not ready for input it would not be available for the users to input anything.
you can find the checkbox for this in the properties of the variable in query designer.
Hope this matches your requirement.
Regds,
Shashank

BOM selection in the MRP

Hello Gurus
   when MRP runs , what is the process of BOM selection. Are there any user exits to control the BOM selection.

Dear Vidyadhar Reddy,
For BOM selection you will assign the selection ID in T Code OPPQ --> under planning run -->
BOM/Routing selection.Say suppose if you are assigning an ID 01and for this ID you can have many
options using priority.
Say SelID     SelPr     Usage     Usage text
        01     1     1     Production
     2     3     Universal
     3     2     Engineering/design
So in This case the system seraches for a BOM with usage 1 production,if there's no BOM with this
usage for production,then it seraches the BOM with the next priority say universal BOM and then the
next priority for Engineering Design BOM.
This priority can be configured as per your business requirement in T Code OS31.
So the above is from configuration side and from the front end,
1. Using BOM status - Active(01) and Inactive(02).
2.Using Lot size and validity dates you can control the selection.
So check with this and revert back still if you have more queries.
Regards
Mangalraj.S

I have been trying to import old family dads into iMovie. I receive the following message "None of the selected files or folders can be imported"

I have been trying to import old family dvd's into iMovie. I receive the following message "None of the selected files or folders can be imported" Is there a problem with the format not being recognized by Imovie? Same home dvd's work on internal dvd player. Any Ideas?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

BOM selection during MRP running

Hi,
   I have a question about BOM selection during MRP running...
   I have three production version and all of them are valid at the same time..I get a problem "no BOM data seletion" during MRP
running..I suspect it is due to that I have three production version and MRP didn't know take which one..Can anyone tell me
where can i config it or what's wrong with it in my situation?
   btw,BOM usage and stats are correct .so is the router data..since MRP is running well if i only have one PV..thanks..

Hi Monst,
Looking at the screenshots you uploaded, it seems that the validity of each of the production version is from 7.12.2011 to 1.12.2012.
Please check whether for Planned order no. 36659 alternative BOM no. 1 is getting selected (Since BOM selection ID is 2).
For planned order nos. 36660, 36661 and 36662, the start date is perhaps before 7.12.2011 and end date as we can see lies in the validity period of production version. Hence, neither of the alternatives of the BOM is getting selected.
For verifying the above logic, please make the BOM selection method as 3 (selection only by production version) and run the MRP. I think MRP will get terminated in this case since no BOM will be chosen for first planned order.
Just in case u need to select the BOM for planned orders, you can manually enter the production version no. in the planned order change mode.
Please tell if this helps and revert back.
Regards,
Chetan.

Bom Selection

Hi Friends
I am working on a Long Term Planning Scenario, while simulating the client will use various BOMs to check the costing during Annual Planning run and also for Planning run for a Quarter, how can I select the BOM as required during LTP-MRP Run? Also plz let me how to configure the BOM selection ID??
Jade

Hi,
BOM selection will be done by automatically, manually not possible. In material master MRP4 view BOM selection option given by,
1. Lot size
2. Date
3. By production version
4. Only by prod version.
System will select according to that only.
Before configuring BOM selection ID, we have to configure Order of priority b ytcode OS31. In this create selection ID no by priority wise respect to BOM usage.
Use this BOM selection ID in BOM application as required.
Regards,
Dharma

MD04 message 52: No BOM selected

Similar Messages

Maybe you are looking for