ME006 error during Inbound Delivery Confirmation VL06I

Hi, to all..
We are trying of post multiple goods reciepts (same PO) for Inbound Deliveries with trx VL06I
When we push the botton, we get next error:
ME006 User && is already using PO &&
In some cases just the first InbDel is confirmated, other times, 2 or 3 ID are confirmated buy they are NO consecutives .
We think software in Support Package 17 has some bug, but we had not been able of find any SAP Note to correct this problem (think about ENQUEUE_EMEKKOE/DEQUEUE_EMEKKOE functions)
We have checked also trx SM12 and NO blocking appears ther...
I'll appreciate any help in this issue.
Best Regards..
TMoreno

Hello,
I manage to check the message ME006 in IDES and it is standard SAP message.
I have one question, why is user who is doing the goods reciept for the inbound deliveries associated with single purchase order opening the same purchase order in change mode at the time of goods reciept
This message ME006 only appears if your user has opened the purcahse order in chnage mode, during the goods reciept process with VL06I.
This is also true when user XYZ has opened the purchase order in chnage mode (ME22N) and user ABC is doing the goods reciept for the same purchase order.
I suggest that you do not open the purchase order in change during goods reciept.
I hope this helps
Br,
Tushar
Edited by: Tushar Patankar on Jan 11, 2011 3:33 PM
Edited by: Tushar Patankar on Jan 11, 2011 3:38 PM

Similar Messages

'Customer Not found' error during inbound delivery

Hi Experts,
During creation of inbound delivery(IBD) with transaction VL31N (against normal PO with doc. type NB), we are getting following error.
Customer not found
Message no. 8B519
Diagnosis
No entry found in KNA1.
Procedure
Please contact your system adiministrator
As per our understanding there should not be any connection for IBD & Customer master. Moreever we are getting this error for Only Brazil Plant. IBD works fine for India & Argentina plants.
Requested to provide any possible clues.
Regards
Manoj

Hi Manoj
This error messag should be realted to the Brazilian localization...
and th e problem reported should be in the table J_1BTVAKV, If you don't need a Nota Fiscal in the step of process, you should not assign the Nota Fiscal type to sales doc type .
Please correct your configuration and perform a new test.
Regards,
Mauro

Error during inbound delivery creation for some times not always

Hi,
I'm getting the following error when i'm trying to create an inbound delivery for PO.
                                                                                Diagnosis
The system attempted to find the reference movement type for
     the Warehouse Management system. A corresponding entry is
     missing in table 156S with the argument 101/X/X/ / /X/.
     The argument consists of:
     o   IM movement type
     o   Indicator: Value update
     o   Indicator: Quantity update
     o   Special stock
     o   Movement indicator
     o   Access indicator
     o   Indicator: Consumption
Can someone help me to resolve it? as it is not happening always
Appreciates everyone time and help.
Thanks and regards,
Siva

Hi,
Thanks for the response and yes i did maintained IM/WM mvt types for 101 in both places.
If the movement type is maintained well why SAP says it is not?
SPRO > LE > WM > Interfaces > IM > Define Movement Types - "Assign WM Movement Type References to IM Movement Types'
Related tabel is V_156S_WM
If you check your configuration you will see that there are many entries with 101, and there are several other parameters...
First you should check what you are doing in IM, what parameters that mvt has (qty, value update, special stock, etc) > after that you should check whether it is maintained well in WM customizing - see steps in my previous email.
Regards,
Csaba

Error during Inbound Delivery creation by Idoc DELVRY05

Hi,
We are trying to consolidate ASNs and creating an inbound delivery for the same. Thus we have more than one PO information in the idoc.
It processes fine and creates an inbound delivery if all the line item nos are different.
But the issue is, when there are articles which have the same line item no. even if the articles are different and they are on different POs. It gives the following errors.
1) "Delivery item cannot be exactly determined
Message no. HUFUNCTIONS313"
I tried to debug the above error and found that while packing it looks to the lips-vbeln/posnr & not the PO nr./PO item.
I am not sure if this could be handled by some config. Please advice.
2) "V51VP - item was not found - process cancelled
Message no. HUGENERAL056"
Any hints or comments on the above would be appreciated.
Thanks & Regards,
Akshay

Hi Raghavendra,
It has been a long time. But, as far as I can remember we had made coding adjustments in the customer-exit EXIT_SAPLV55K_004, include ZXTRKU12 to fetch the correct item and fill the idoc segment fields.
This resolved the issue.
Best Regards,
Akshay

Error during Inbound Delivery

Dear Expert,
I have problem when we want to create Inbound Delivery/VL31N. Error message is "No deliveries created (check log)". The long text of log is :
Diagnosis
                                                                                There is no item category available in item category
    determination in the delivery (table T184L) for the following
    entries: EL LEIS V
                                                                                System Response
                                                                                The system does not allow further processing of this item.
                                                                                Procedure
                                                                                Specify the appropriate item category for the above mentioned
    entries or inform your system administrator.
I confuse with this message, because i don't know the relation of table T184L with my case. the another Inbound delivery is working fine, only 1 inbound delivery that getting this error. Any solution and advice. Thx a lot
BR,
Affan

hi
go to t code 0184 and here against the entry EL LEIS V maintain item cat as norm and same manintain in ur material master
regards
kunal
award if helpful

Error in Inbound delivery monitor (VL06i)

Dear Friends,
I am getting error in vl06i, when i do partial GR for inbound deliveries.
The error is
Item 000110 does not exist
*Material is not the same confirmation and delivery.
Is the first error is because the particular item is not confirmed for GR, but exists in delivery.
Is the second error because the confirmation quantity is less than the GR quantity.
Kindly Help.
Thank you
Prabhu

When you do Partial GR, System will compare the IBD Qty first & the difference thrown as Shipping notification.
SN qty will hang in the middle as unknown qty.
To clear this error, first clear SN qty by matching GR & IBD qty. then proceed doing GR.

Goods receipt during inbound delivery

Hi all,
We have a Plant (DVOP) and Subcontractor (Vendor- 2010113) in Japan
region and have mapped this Vendor as a MRP Area Vendor (2010113) in
the Japan Plant (DVOP). We do safety stock planning at each location.
Based on the Master Data set up for the Subcontracting components MRP
creates the Purchase Requisition for the components (which needs to be
delivered to Subcontractor) and to this PR we convert into STO to
deliver the material from Plant DVOP to MRP Area (2010113). System is
allowing us to create the POs with Document type UB. We are delivering
the PO using transaction VL10F to the MRP Area. In the document type we
are not mentioning Item Category as L as the document type UB is not
allowing us to change the Item Category to U.
After creating the delivery and PGI to the MRP Area, subcontractor
receives the stock by inbound delivery (VL32N), and during the PGR
time, we are getting the below error in the inbound delivery.
Message no M7 226
The System could not find entry in 101 X X O B X in any of the movement
type control tables
please can anyone advise,,,
thanks
sudhakar

Hi,
For creating inbound delivery , Confirmation tab must be entered in PO. It is must.then only you can post GR wrt Inbound delivery.
Try it and any quries let me know.
Regards,
Smitha

Inspection lot problem during inbound delivery

Hi,
I am facing following issue during inbound delivery.
I have activated inspection type 01 in material master for a packing material. Created a PO for the material through ME21N. PO created. Now I am creating inbound delivery through VL31N with reference to PO no and vendor. When I am entering the storage location I am getting the below error..
Upon investigating the issue system is creating the inspection lot
But inspection lot is not showing in QA32/QA02.
checked various threads but not of much use. I am not able to proceed further.
Kindly help.
Thanks
Kumar

Hi Kumar,
Plz check in PO history, if GRN is done. If yes then plz check in GRN quantity tab, if inspection lot is created. IN QA32, in dynamic selection enter the inspection lot and click on 'select all inspection lot' and check if it is created in system. If lot is prepared then as per the error message someone from your department must be processing it.
In Your inbound delivery screen check your tab status overview if it is A: GR not made or C: GR completed.
Also during inbound delivery storage location is picked up in inbound delivery automatically from PO you need not to enter it again.
Plz check else post screen shot of PO history and QA32.
Regards,
Priti.

IDoc type "DELVRY03" for INBOUND delivery confirmation and Outbound Deliver

Hi ,
We have a requirement where we have to send Inbound delivery confirmation as well as outbound delivery notification to our same customer. (3PL case)
We have a EDI partner who is receiving our messages and transforming them before sending it to customer.
Now my problem is , since I am using same idoc type (DELVRY03) for both cases therefore wondering how my EDI partner will differentiate whether received message is a INBOUND delivery confirmation or OUTBound delivery notification.
regards
Shrey

Thx for your reply ...
Wondering about the impacts , if I create a new message type like ZDESADV and attach it to DELVRY03.
In this i could have two message types DESADV and ZDESADV.
Will it impact anywhere ?
Regards
Shrey

IDoc Message Type to create Inbound Delivery + Confirm + GR

Hi Experts,
I need IDoc message type which can create Inbound Delivery / Confirm / Create GR with Inbound Delivery as reference and i dont want to use DELVRY05
because I need to create Inbound Delivery / PICK / Confirm but not with Transfer Order Creation means Unnecessarily we dont want to create Transfer Orders. We need to exclude Transfer Orders and create GR.
Please do the needful.

Dear Kishore,
It's possible via writing code in enhancement spots of transaction code VL31N, MIGO_GR/MB01.
R,
Amala

Error during Production Order Confirmation

I get a real wierd error during production Order confirmation. The error message is
"Additional items are not allowed
Message no. ZOAL010"
Can anyone throw some light on this?
Regards
Raj

it is not std SAP message.
you can check the user exit for confirmation.
check in transaction code CMOD/SMOD for CONF*

Issue with Message Type Triggering during Inbound Delivery Creation

Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
Thanks

Hi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks,

Check amount of transition stock during inbound delivery creation

I want to move stock between plans, therefore I have the following steps:
1. Stock Transfer Order (STO), e.g. 500 pieces
2. Sending plant: MIGO (GI for STO) with MT 351 to post to transition stock, e.g. 100 pieces
3. Receiving plant: Inbound Delivery with reference to STO VL31N
4. process Inbound delivery in warehouse (SAP-WM)
The question is:
During step 3, when accessing VL31N the system proposes the full order quantity (e.g. 500 pc.)
I can change the amount to any amount I like, e.g 240 pieces.
How can I tell SAP, that Inbound delivery creation is only possible for the amount
which has been posted to stock in transition (100 pieces)
I want an error/warning message in case user wants to create Inbound delivery quantity higher than the amount that has been posted to transition stock.
Any ideas?

MIGO in sending Plant?
How it is possible? MIGO means, Goods receipt. This should be in Receiving plant.
Sending plant should do the PGI
MIRO in receiving plant
Billing in sending plant
Payment from Receiving palnt and clearing in sending plant
Correct me if i am wrong
Thanks

How to enter a returnable packaging material during inbound delivery?

Hi,
How do you add a returnable packaging material from vendor as a line item in the inbound delivery? When I try to add a LEIH type material as a line item in the inbound delivery (VL32N), the following error is displayed:
"No item category exists (Table T184L EL VERP ELP)"
Thanking you in advance,
Sreelakshmi

HI.
Please reffer the below link.
ERROR : No item category exists (Table T184L LB VERP )
Error while creating I/B delivery: No item category exists (Table T184L EL)
1) EL = is the delivery type you are using for Returns to Vendors
2) VERP = is the Item Category Group in the material master of
3) ELP= Item Usage
You have to add the missing configuration as follow:
IMGLogistics ExecutionShippingDeliveriesDefine Item Category
Determination in Deliveries(Transaction 0184).
Create a new entry or copy from an existing one for VERP. NOTE: The Delivery Item Category RLLN is the standard defined by SAP, be
sure you enter the one defined in you company.
Thanking you

Enter a Material or item catg error in Inbound delivery through idoc

Hi,
When Iam processing inbound delivery through Idocs, iam getting 2 kind of errors
1. Enter a material or item category
2. No item category exists (Table T184L EL 0002 V )
Iam thinking may be this is about not having an entry in T184L table. we have an item as ZTAS. can somebody let me know how to solve these errors.
Thanks,
Kashif

Hi Kashif,
You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
Rgds,
Kumar

ME006 error during Inbound Delivery Confirmation VL06I

Similar Messages

Maybe you are looking for