ME21N-Deliver completed check box in delivey tab to be given user authorzn

In ME21N User A creates the Po for a Quantity 100 Nos & then he makes a MIGO for the qty 60 Nos:He comes back to ME22N in *DELIVERY TAB where in there will be a check box as DELIVERY COMPLETED :He will ensure to tick the same & save.
So Other User B enters the same PO in ME22N & Removes the ticked check box as DELIVERY COMPLETED & saves it.
Please suggest me the solution based on the same.

Hi Murali,
This issue is because of the user transaction authorization, user A & B. And it can be done by sap security authorization by basis for that perticular transaction, then system can not allow to change or modify any data pertaining to the PO. So, please contact sap basis consultant, will be doing that, so that user can not change the data manually. And
Basically when we talk about the the Delivery Completion Indicator, it should not be set manually, but it will be flagged by system automatically soon after the goods are received fully.
For a good business practise: this
"Deliv. Compl." -> indicator in Delivery tab of Item details is not to be set by user manually, because system will be updating that with flagged automatically soon after the full goods are received.
Hope it clarifies you,
Regards,
Srin

Similar Messages

While creating a PO in ME21N the return check box is automatically ticked.

Hi SAP Gurus,
I am facing a problem while creating a PO.
Every time I am trying to create a PO in ME21N, the return check box at the Item level of the PO is automatically getting ticked.
The check box can't be unticked even in change mode of the PO.
So all of the PO's with different document types are getting created with the Return check box ticked.
Can you help me to uncheck the Return tab in the Item level.
Please advice if any configuration is required or the code has to be modified.
Thanks in adavance.
Regards
Subhasis

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

Complete Check Box in Version

Dear All
User has entered values for version change, and he forgot to click the "complete" check box and saves the document. So release is not get effected.
I want this "complete" check box to be mandatory, in the case of purchase order.
Any user Exit ?
please guide.
Regards,
Pardeep Malik

Dear Charlie,
My Basis team say that they have upgraded to this version of Note already.
Any User Exit ?
I want to make "Complete Check Box" to be checked Mandatory before saving after change or Automatic checked after saving.
So that my release stregtegy revoked ! and we have to release it again.
Regards,
Pardeep Maliks

"complete check box" in version management

Dear Gurus,
User has entered values for version change, and he forgot to click the "complete" check box and saves the document. So release is not get effected.
I want this "complete" check box to be mandatory, in the case of purchase order.
please guide.
thanks
kailash thakkar

Dear AP,
Can you tell me which user exit to be used.
REgards,
Pardeep Malik

VERSION "completed" check box to be made mandatory

Sir,
I want to make version "completed" check box to be now made mandatory.
right now reason and text is made mandatory
regards
amey

When you create a requisition or an external purchasing document (such as a PO), the system automatically creates an initial version (version 0). From this time on, changes and newly entered data are documented in the current version that is valid in each case.
In the case of requisitions, one version is generated per requisition item (at item level). In the case of external purchasing documents, one version is generated per document (at header level).
Once all necessary data has been entered for the purchase requisition, the version must be completed. Only then can:
● The purchase requisition be released or converted into a follow-on document
If a requisition is subject to an overall release procedure, the versions of all requisition items must be completed in order for the requisition to be released and converted.
● The external purchasing document be released or outputted (printed out or transmitted as a fax or EDI message etc.)
You complete a version by setting the Completed indicator in the version data. The processor of a purchase requisition or external purchasing document thereby explicitly indicates that he or she has now made all changes desired at the time.
You can specify that version 0 is to be completed automatically in Customizing for Purchasing. To do so, set the Version 0 OK indicator under Version Management ® Set Up Version Management.

Show Borders check box in layout tab

Is there a way to change the default setting for the Show Borders check box so that it is turned OFF instead of on? In all of our dashboards we do not want the border to show and in each case I have to go into the layout tab and click off the Show Borders option. We have hundreds of analytics top post and it gets very tedious to do this for each one.
Thanks,
Tom

I don't know of any place where you can set this, unfortunately.

Can't remove known password (v11); no Protection option under Tools, no check boxes in Security tabs

Hello,
I am unable to remove a known password on a document (using version 11.0.3 currently, but also on older versions). I have no "Protection" option under Tools and I see no "Remove Security" check boxes (or any check boxes) in the Security tabs. Any help would be greatly appreciated...thank you!

That's the reason, but it isn't new. No version of Reader has ever been able to change security settings. I'm guessing you used to have a copy of Adobe Acrobat (which looks similar but can do more).

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

BAPI_PO_Change in SAP 4.7 not able to check version complete check box

Hello,
Our requirement is to change the delivery date of one or more items in PO after PO release and print,
We are using BAPI_PO_CHNAGE to change the delivery date which will run in background.
As version management is active in our system, new version gets generated as soon as we change the PO and we
need to check the version completed flag along with the changes in the PO.
We canot use BDC because, BDC is also not tracking the version management tab specifically the version completed flag while recording.
We are not very keen in directly updating the PO version table as it may have serious impact in the system.
WE have treied in SAP 6.0 and its working there but in SAP 4.7 its not working.
Please help us in solving this problem?
Thanks in advance.

closing the question
Edited by: Sachin on May 19, 2010 7:57 AM

Binding a Check Box with a User Defined Field

Hi everyone,
i v created a user defined field (U_CheckPro)in the system table "OITM" with two values: Y for Yes and N for No. In relation to that i v also created a check box on the form "150" and would like to know how can i bind my checkbox with my user defined field properly.
The user would be than able to enable or disable the check box for each item (article). The user setting schould be than be active and valid in sbo-business logic, each time an item is selected. (for example in case of sales order ID 133, "OINV").
Any helfpul hints? Samples would be welcome as well.
Thanks and regards
Alban

> First of all you should remove the valid values
> because checkboxes does not work with valid values...
> Just give a default value.
Hi Rasmus,
thank you very much for your helpful hint. I guess my problem is solved by that - nevertheless here is my complete code sequence once again in case of possible errors.
I would appreciate any additional suggestion for improvement of the same.
Thanks and regards
Alban
>>>
Private Sub AddItem()
        ' Test UserSource
        oForm.DataSources.UserDataSources.Add("U_CheckPro", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
        oItem = oForm.Items.Item("122")
        ' Adding a Static Text item
        oNewItem = oForm.Items.Add("StaticTxt2", SAPbouiCOM.BoFormItemTypes.it_STATIC)
        oNewItem.Left = oItem.Left + 20
        oNewItem.Width = 100
        oNewItem.Top = oItem.Top + 12
        oNewItem.Height = 25
        oNewItem.FromPane = oItem.FromPane
        oNewItem.ToPane = oItem.ToPane
        oNewItem.LinkTo = "CheckBox1"
        oStaticText = oNewItem.Specific
        oStaticText.Caption = "Test_Caption"
        ' Adding a Check Box item
        oNewItem = oForm.Items.Add("CheckBox1", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
        oNewItem.Left = oItem.Left
        oNewItem.Width = 20
        oNewItem.Top = oItem.Top + 15
        oNewItem.Height = 19
        oNewItem.FromPane = oItem.FromPane
        oNewItem.ToPane = oItem.ToPane
        oNewItem.DisplayDesc = False
        oCheckBox = oNewItem.Specific
        'binding check box to source
        oCheckBox.DataBind.SetBound(True, "OITM", "U_CheckPro")
    End Sub
>>>

Use check box in function module

Hallow I build a function module and I declare a check box (check_str in tab import) that u can choose if u wont to see relat 027 push x else u can see 027 +034 my error is with definition of ceck_str it bring me an error that called field relat is unknown. how can I declare it .maybe I am not do it write I do it in first time. (relat is field from table hrp1001).
regards
DATA ceck_str TYPE string.
if SWITC_HISTORY = 'X' .
ceck_str = ( relat EQ '027' ).
else
ceck_str = ( relat EQ '027' OR relat EQ '034' ).
endif.
This is my select
SELECT objid sobid priox istat endda begda
FROM hrp1001
INTO CORRESPONDING FIELDS OF TABLE d_itab
FOR ALL ENTRIES IN z_course_table
WHERE otype = 'D'
 AND objid = z_course_table-objid
 AND sclas = 'P'
 AND ceck_str .

Ur select statement looks like kind of a error ..Please check the last statement in select
SELECT objid sobid priox istat endda begda
FROM hrp1001
INTO CORRESPONDING FIELDS OF TABLE d_itab
FOR ALL ENTRIES IN z_course_table
WHERE otype = 'D'
AND objid = z_course_table-objid
AND sclas = 'P'
AND ceck_str = 'your Value'.

Handling Check box in BDC program

Hi Folks,
          I am developng a BDC for a transaction. The BDC has to pass four tabs in that transaction. Everything is working, but in the fourth tab, there is check box which need to be checked. But when the BDC program enters that tab..it throwing a error message saying 'No field with that name in this screen'. there are still some more check boxes in that tab. Is there any specific way to handle the check boxes...is there anything to add as extension for that check box field..pls suggest me...
         Thanks,
          Shyam.

hi,
check the screen field name.. like 'GLACCOUNT_SCREEN_CCODE-WAERS'
which field it is throwing error?? which transaction??
thanks,
vijay.R

How to capture check box click in ALV

Hi,
I have requirement in which after displaying the ALV out put, immediately when the check box is checked i need to capture it and proceed with further coding with that input.
Check box click is not getting captured in "USER COMMAND or LINE SELECTION"
Could you please suggest a way.
Regards
venkatesh.

Venkatesh,
If you are using cl_gui_alv_grid you need to register "change" event to catch the checkbox change.
you do so with this method of cl_gui_alv_grid class :
register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
event handler class
class lcl_event_receiver definition.
public section.
    methods:
    user_command for event user_command of cl_gui_alv_grid
    importing e_ucomm,                                      "#EC NEEDED
    data_changed for event data_changed of cl_gui_alv_grid
    importing er_data_changed e_onf4 e_onf4_before e_onf4_after e_ucomm,"#EC NEEDED
endclass.
global data
data: o_event_receiver      type ref to lcl_event_receiver.
data: goo_grid type ref to cl_gui_alv_grid.
At the displaying of your grid / register the change event and set handlers
goo_grid->register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
    set handler:
      o_event_receiver->user_command for goo_grid,
      o_event_receiver->data_changed for goo_grid.
hope this helps...
regards

Check box selection in IP WEB

Hello everyone
I am in IP with WEB front end.
Have an analysis item which I need to run a planning function on that chages a charateristic field which is a status. The user needs to be able to select a subset of rows on which the planning function will be executed.
Ideally a check box on the row would allow the user to select multiple lines and then execute the planning function changing the status.
Can someone point me in the right direction?
Thanks

Your only option to enable functions to run on selected rows is to find some way to filter the query on those rows. If you cannot find any way to do that you can do a workaround which I have done recently:
1 - Get a dummy key-figure
2 - Instruct your users to fill that key figure with the value "1" for the lines they want to process.
3 - The function (must be a FOX ou Exit) will validade if the user has filled the keyfigure with the value 1 and process that line. If the user didn't fill the keyfigure the function does nothing on that line.
I know this isn't a perfect solution but it was the best way I could think of. If someone finds a better way I'll be interested too!

Allowing user to click check boxes in any order

Hi,
I'm using Captivate 5.5 to create a training session with our software. On a particular page, our trainer wants me to instruct the user to click every check box on a page. Since there are 10 check boxes, I would like to let the user click all the check boxes in any order, as opposed to clicking them in the same order that I did using the normal training recording.
I've been trying to insert click boxes and assign variables, but then I run into the problem of not being able to show the checkmark when the check box is clicked.
Has anyone run into this problem or tried to created a page where the user can click multiple object in no particular order?
Thanks!

Hello,
This is perfectly possible with the checkboxes widget, and will be a lot less work than messing with images and click boxes. The big advantage of the checkboxes widget is that it is static, so you do not need to worry about rewinding the playhead which would be the case if you are working with interactive objects. However if you want to offer a 'reset' to the user, or perhaps to return to the slide with the widget, I warmly recommend to download the free enhanced checkboxes widget created by Jim Leichliter, because it allows you to control the variables associated with the widget.
I will not explain extensively how to use it, bit in a hurry because I have to teach in a couple of minutes. But here are some links: first a link to Jim's widget, than to a blog post where I explain the use of the Default Checkboxes widget, and third the explanation of the enhanced version.
Checkboxes Enhanced
Widgets and Custom Questions - part 1
Extended widgets ...
Just one last warning: I did not check the maximum checkboxes supported by the widget (you need 10), if necessary however you can insert the widget twice. However never duplicate a widget, nor have them in the same space on the stage.
Lilybiri

ME21N-Deliver completed check box in delivey tab to be given user authorzn

Similar Messages

Maybe you are looking for