Measurement Probe Data Acquisition and Calculation

Hi there,
Can we make data acquisition from measurement probe ? I mean, can we put the data to the grapher so we can "convert" it to excel or something ? I need to show the V(dc), V(p-p), I(dc), I(p-p), etc... in the grapher view.
Second, according to my reference, V(dc) = V(p-p)/phi or 0.318 x V(p-p) , where phi = 3,14
This also contribute to current, I(dc) = I(p-p)/phi or 0.318 x I(p-p)
In the calculation, MultiSim will use 0.333... or 0.32 and the result will be in quite different. So, anyone can tell me where can I get the formula which MultiSim used to calculate the circuit ?
Ghost Recon Team Leader
Ghost Recon Team Leader

Hay thnx dude..
I found the example and now it works
once again thanks a lot

Similar Messages

  • Z600 workstation missing pci data acquisition and signal processing controller driver

    I just installed Win7 Pro x86 on my Z600 workstation.  It was an upgrade from WinXP Pro.  In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02.  Can someone assist me in finding these drivers.  I looked on the Support/Drivers page for this  model but couldn't find anything.
    This question was solved.
    View Solution.

    Hi,
    You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Driver missing - PCIe Data Acquisition and Signal .....

    Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
    All the drivers are working (so far) and i haven't encountered many problems.
    However, there is one thing bugging me:
    When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
    I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
    Has anyone seen/resolved this, and if so, how?
    Thanks.
    Kaj.

    Okay, will do.
    Thanks.
    Also i wonder if you could help with another problem?
    http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

  • PCI Data Acquisition and Signal Processing Controller driver

    I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
    Can you please help?
    Thanks,
    Leontina
    This question was solved.
    View Solution.

    Hi:
    Please see if installing the Intel Chipset driver installs that device.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  • Pci data acquisition and signal processing controller -Device software not installed

    My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed  on my Device manager.
    Please suggest me a suitable solution.

    No its not working , Give me an alternate solution.

  • E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller

    I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?

    That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!

  • Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

    Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver.  Click on the driver tab. Click on Update driver.  Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

  • Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

    Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below).  I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below!  Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

    Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable.  I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

  • Data acquisition and frequency generation togather with PCI-6251 and LV8.2

    Hi friends,
    I am a new user of Labview. I am using LB8.2 with PCI-6251 .
    I have to generate frequency and then measure the data and then for next frequency and so on.
    i know that for this i have to use looping and that is not a problem. The real problem for measurement is to identify whether the frequency is been generated. if yes then measurements starts otherwise it should wait until it started. then after finishing the measurements send a signal to generator for changing the frequency and amplitude.
    Now these two things {generation and measurement} togather are not working correctly for me. so i make 2 diff file, one for generation and other for measurements <by modifying the examples>. I can run both file togather and it works. But it need lots off effort and time. I have to measure from 10Hz to 1000Hz in 2Hz frequency step and i cannt leave in between .
    can anyone help me how to syncronize these two togather .
    Trying to attatch. both the files here ..
    main_v1.1.vi --> for Measuring
    Oscilloscope.vi --> for waveform generation
    Attachments:
    main_v1.1.vi ‏150 KB
    Oscilloscope.vi ‏37 KB

    Hay thnx dude..
    I found the example and now it works
    once again thanks a lot

  • High-speed data acquisition and DMA

    Hi, I have a custom home-made 4 channel, 16 bit data acquisition board that has onboard memory of 2 GB and can sample at 250 MSPS. The daq returns data in 1 MB data block size. The Labview wrapper allows us to operate this board in two modes (continuous and acquire once). In acquire once mode, I can use the circular buffer architecture and stream data to the disk (difficult to view data in real-time). The continuous mode work in a way that arims the daq board acquires the data, rel-arms the daq for next 1 MB data and can return data for real-time display. However, during this arm/re-arm time crucial information is lost. The solution would be to access the DMA data as fast as we can and process it. Can you please show me an example to achieve this in simulation mode?
    Thanks
    RY

    Then you say the DAQ time take 1 sec, and the processing time about 4 second. How do you know this? Without having any VIs. And why do you have to read your DAQ unit every second. Also are you sure your processing part of your program is optimal. It is quite easy for a beginner to write Labview code that is very slow then dealing with arrays.
     I am quite sure you have some Labview program. But you for some reason do not like the thought of posting your code. Just post them and let us take a look. Hard to help not knowing any thing
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • I want to acheive digitally triggered data acquisition and using AIO lines for triggering connecting to PFI lines but no response.

    How to acheive digital data acquisitions using AO signals as trigger signal.

    Greetings,
    I am not sure that I have a clear understanding of your question. It appears that you want to perform a triggered acquisition. You mentioned both analog input (AI) and analog output (AO). Which type of operation are you performing? Are you using digital or analog triggering? Also, it would be helpful if you could mention what hardware and software you are using.
    Spencer S.

  • Problem with data acquisition and motion control

    I have PCI-6024E and PCI-7342 cards on a single PC. Servo motion control works fine when it goes alone or is accompanied by one point data acquisition in a while loop, but when I start data acquisition with specified sample rate, the motor moves with breaks.
    Does anybody know what is the problem? Is it possible to fix it?

    How are you performing your motion? Is it a position move or a velocity move? How are your triggering the data acquisition? Using breakpoints on the 7342? If so, are you using single breakpoints or modulo? How are you configuring the data acquisition rate? Are you triggering just the start to the acquisition and the unsing the daq scan clock or are you using the motion controller to send the scan clock itself?

  • Continuous data acquisition and analysis in real time

    Hi all,
    This is a VI for the continous acquisition of an ECG signal. As far as I understand the DAQmx Analog read VI needs to be placed inside a while loop so it can acquire the data continously, I need to perform filtering and analysis of the waveform in real time. The way I set up the block diagram means that the data stays int the while loop, and as far as I know the data will be transfered out through the data tunnels once the loop finishes executing, clearly this is not real time data processing. 
    The only way I can think of fixing this problem is by placing another while loop that covers the filtering the stage VIs and using some sort of shift registeing to pass the data to the second loop. My questions is whether or not this would introduce some sort of delay, and wether or not this would be considered to be real time processing. Would it be better to place all the VIs (aquicition and filtering) inside one while loop? or is this bad programming practice. Other functions that I need to perform is to save the data i na file but only when the user wants to do so. 
    Any advice would be appriciated. 
    Solved!
    Go to Solution.

    You have two options:
    A.  As you mentioned, you can place code inside your current while loop to do the processing.  If you are clever, you won't need to place another while loop inside your existing one (nested loops).  But that totally depends on the type of processing you are doing.
    B.  Create a second parallel loop to do the processing.  This would decouple the processes to ensure that the processing does not hinder your acquisition.  See here for more info.
    Your choice really depends on the processing that you plan to perform.  If it is processor-intensive, it might introduce delays as you mentioned.  
    I would reccomend you first try to place everything in the first loop, and see if your DAQ buffer overflows (you can monitor the buffer backlog while its running).  If so, then you should decouple the processes into separate loops.
    Regarding whether or not "this would be considered to be real time processing" is a loaded question.  Most people on these forums will say that your system will NEVER be real-time because you are using a desktop PC to perform the processing (note:  I am assuming this is code running on a laptop or desktop?).  It is not a deterministic system and your data is already "old" by the time it exits your DAQ buffer.  But the answer to your question really depends on how you define "real-time processing".  Many lay-people will define it as the processing of "live data" ... but what is "live data"?

  • Optimizing data load and calculation

    Hi,
    I have a cube that takes more than 2 hours to load and calculates more than 3 hours (at its fastest build). There are times that my cube loads and calculates for more than 8 hours. My calculation only uses Calc All. I am very new to Essbase and couldn't find a way to minimize the build time of my cube.
    Can anybody help? Here are some stats about my cube. I hope this helps.
    Dimension Name Type Declared Size Actual Size
    ===================================================================
    ALL_ACCOUNTS DENSE 7038 6141 Accounts <5> (Dynamic Calc)
    ALL_LEDGERS SPARSE 4 3 <1> (Label Only)
    ALL_YEARS SPARSE 3 1 <1> (Label Only)
    ALL_MONTHS SPARSE 22 22 Time <7> (Active Dynamic Time Series Members: Y-T-D, Q-T-D)
    ALL_FUNCTIONS SPARSE 55 54 <9>
    ALL_AFFILIATES SPARSE 715 696 <4>
    ALL_BUSINESS_UNITS SPARSE 452 440 <3>
    ALL_MCC SPARSE 1557 1536 <3>
    Any suggestions would be greatly appreciated.
    Thanks!
    Joe

    Joe,
    There are too many potential optimizations to list and not enough detail to make any one or two suggestions. I can see some potential areas from improvemt, but your best bet is to bring in a knowledgable consultant for a couple of days to review the cube and make changes. For example, at one client, I made changes that brought a calculation down from 4 + hours to 5 minutes. It took changes to load rules, calc scripts and how they loaded their data. So it was not one thing, but mutiple changes.
    If you look at Jason's Hyperion Blog http://www.jasonwjones.com/?m=200908 , he describes taking a calculation down from 20 minutes to a few seconds. Again, nat a single change, but a combination.

  • Data acquisition and generation with PCI-MIO-16E-4 card help!!!!

    Hello,
    I'm using a PCI-MIO-16E-4 card with labview7 (in using DAQmx)and I
    would like to draw a frequency response.
    My problem is: my program can run correctly in low frequency but, it
    can't work correctly in high frequency (after 2KHz the signal is
    false).
    For verifying my program: I only try to generate and acquire a sweep
    sine. I constate after 2KHz the sine I read dosn't resemble to a sine
    I wrote.
    Can you say me where is the problem?
    Thank you.
    Le Trong Thao.

    "Dr. Imad" wrote in message news:<[email protected]>...
    > my understanding is that you are generating a sine wave (on one of the
    > anlogoutput channels) and you are trying to read the signal.
    > Since you can verify the signal at low frequency, but not at high
    > frequency, it looks like you should increase the scan rate of the data
    > acquistion (if you can, set it to 10 times the signal frequency)
    > You can also use an oscilloscope to verify the signal is what you
    > really generated.
    Thank you for your response.
    I've tried to do it, and I've tried several other possibilities but it
    doesn't work correctly.
    In fact, I think the problem is in my program. Do you have a program
    that works correctly? I f
    ound examples in the help but they don't run
    correctly.
    Le Trong Thao.

Maybe you are looking for