Message: Vendor not assigned to Plant

Hi All,
I am creating a standard PO for raw material. While creating I am getting a message : Vendor not assigned to Plant.
This message should not come as my PO is not a inter-company PO.
Can someone help me.
Thanks,
Vengal Rao.

Hi
Sandra is right (and Paulo). This message is once hardcoded in all system (function module AIP01_PLANT_DETERMINE):
      call function 'AIP01_T001W_EXT_READ'
        exporting
          i_lifnr         = i_lifnr
        importing
          es_t001w_ext    = es_t001w_ext
        exceptions
          plant_not_found = 1
          others          = 2.
      if sy-subrc <> 0.
        message e002 with i_lifnr raising vendor_not_found.
      endif.
Regards
Eduardo
Edited by: E_Hinojosa on Oct 27, 2011 4:54 PM
Edited by: E_Hinojosa on Oct 27, 2011 4:55 PM

Similar Messages

  • Vendor not assigned to PR when doing a MRP run

    I am doing an MRP run for creating purchase requistions
    However the vendor is not getting assigned to the PR.
    I have the vendor defined in the source list (made it fixed) and also created info record.
    However when i run the MRP the PR is created but the vendor is not assigned to the PR.
    Also how can create the PO automatically from the MRP ?
    Also where can i see the time frame setting for Processing PR to PO?
    Thanks

    Dears,
    I'm faced to the same kind of problem...
    The process is an inter-company PR.
    The MRP of our plant creates PR for the other plant, these PR are type "MFS" (because of customizing with the tcode OPPR, in order to manage MRP group in the material sheet MRP1)
    We have maintained the info-record and the source list, and the extra-purchasing view of the vendor (the plant we send the PR).
    When we launch the MRP, the systems creates the PR and we get them in the dynamical status of stock (tcode MD04). In this list, the vendor well appears on the rigth of the screen. So, it seems that the source list is well managed
    BUT, when we have a look into the PR (tcode ME53N), the vendor doesn't appear in the source list sheet. :-((
    Please, tell me what could be the reason of this stange fact ? (the field is not invisble customized...)
    FYI, we get the same result with material without MRP group, and PR type NB
    Thanks for your support,
    BR,
    Tony

  • Customer & Vendor not transported via Plant tCodes WB01/2 or WB07/8

    Hello,
    We have change control enabled in our Dev, instance/clients SAP 4.7 IS-Retail , Basis 6.2
    Looking for help in understanding the necessary steps to transport the Plant Vendor and Customer records.
    The transport includes Plant records, but in the destination client the Customer and Vendor records that
    are automatically created via WB01/02 are not being included in the transports?
    Would appreciate any advice on how we transport the Vendor and Customer records that automatically
    get created via WB01/2 in the source client to the destination client.
    If we try to use XD01, XK01 the system enforces the Customer/Vendor records can only be maintained
    via the WB## transaction codes for IS-Retail.
    Have tried using WB07/08 and included in a transport, but still the Customer & Vendor master records
    are not being included in the transport.
    Any ideas?
    Regards, Ron.

    WB02 can not be used if the Customer and Vendor are not created implicitly via WB01, this
    is why the transport methodology is failing, See below. We were able to use WB01 on an existing
    Plant that had been transported, to maintain/create the Customer and Vendor relationship,
    but this produced inconsistent CO relationships that caused ME59 to fail.
    Note, you can not use XD01/XK01 for Customer/Vendor maintenance as it would pertain
    to Plant Customer Vendor relationships, this must be done via WB## t-codes.
    What we have found is that exporting and importing plants includes the Customer & Vendor
    coupled to the Plant. However the export and import WBTE,WBTI capability is not working
    properly as is similar to the transport capability.
    So, we have reverted to manually creating the Plant in each Instance Dev "IMG Gold Client",
    Test, Pro to complete this requirement. This has proven to work, but transports and or
    export/import have proven to not work as expected. Probably specific issue with SAP
    IS-Retail.

  • Error message "Solution not assigned to this user"

    After creating the data source, I'm trying to create a report in  SDK sandbox solution.
    As I'm not a keyuser, it is going to the ByD center and asking for user id / password.
    I even tried to assign WoC View also to a user.
    When I tried with different user ids given to me by SAP, I'm getting the same error.
    Let me know  the steps to assign a solution in ByD center for report creation from ByD SDK
    - Ravi ,

    Hi Ravi,
    as I already told Lynn, this will only be possible in a global solution.
    The reason is the following:
    You can create yourself multiple sandbox solution. So if you now to multiple changes with key user tools in the frontend for different sandbox solutions, in the end you won't know which change was made for which sandbox solution as these changes won't appear in your list of solution entitities in the ByDesign studio.
    Therefore: Changes with the key user tools can only be made for the global solution.

  • Error Message:error message 25003001 not assigned to cc 3000

    Hello All,
    I am getting the above error message while posting in FB60. I used the cost center is 25003001 in company code 3000. Actually the cost center belongs to cocd 2500. Please let me know the reason. many thanks, Bob

    Hi
    You have answered your question already.
    Change the assignment for cost center 25003001 in KS02 to company code 3000.

  • Vendor Assignment to plant

    Hello,
    i am new to MM. i have one requirement where i have to create vendor and assigned to plant.
    can you let me know customizing path for assigning vendor to plant.
    i have one doubt whether shipping point and vendor are same ?
    Thanks and regards,
    zubera

    Hi, Generally vendor need not be assigned to plant
    But in intecompany STO, the supplying plant need to be created as vendor and assigned to the plant
    for this go to vendor master purchasing data>extras>add purch data--> here in plant assignment

  • Tax code not Check on Plant / Vendor / Material Combination in Purchase order

    Hi,
    I have created L1 Tax code for VAT and L2 for CST, also maintain the Tax code with combination Plant / Vendor / Material in FV11 for L1 (VAT) Tax Code.  While creating the Purchase order, tax code is not Assigning the Plant /Vendor/ Material combination as maintain in FV11. All tax code allowed to above combination.

    Hii,
    Solve problem.
    Thanks
    Sachin

  • Vendor not intended when create SC using create limit item

    Hi All,
    This is a challenging issue for all of us...
    SRM : 5.0
    ECC : 6.0
    I am facing the problem when creating the Shopping cart..
    When i click on Centralized purchasing -- > Shop -- > Create Limit item
    and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
    It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created..
    If i try to create one more item and specify the Good/service as our custom field value  , for this item there are no error and
    no message saying Vendor not intended for Purchasing organization..
    Please help me in finding out the issue.So that will be greatful to you..
    Advanced thanks
    Points will be rewarded..
    Regards
    Raju

    Hi Teja,
    I agree with you answer..
    When i tryo to create SC using the Product which are repliacted from ECC to SRM.. I am able to create SC successfully. That means vendor is properly intended to the Porg and Pgrp right...
    When i click on Centralized purchasing -- > Shop -- > Create Limit item
    and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
    It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created and Product type is neither a Material nor service.. The product type field vale is blank....
    Please help me in finding out the issue.So that will be greatful to you..
    REgards
    Kumar

  • Config Error 'Not Assign 5' -add new warranty type for warranty master BGM1

    hi
    i do config to add warranty type in BGM1, follow the sap link :-
    - plant maintenance  and customer service -> master data in plant  maintenance and customer service
    -> basic settings -> warranties -> define warranty types :-
    5     Guarantor (customer)     BLM-SAGA
    but, in below link show 'Not Assigned 5' :-
    - plant maintenance  and customer service -> master data in plant  maintenance and customer service
    -> basic settings -> warranties -> define number ranges for warranty type
    I dont know how to assign this number ranges for warranty type. Can anybody guide me to config this..
    thanks

    Hello,
    You have to assign the warranty Type : 5 to your numberrange.
    -> Define Number Ranges for Warranty Types
    -> Click on change groups button
    --> Click the Curser on warranty type :5
    --> Click on Element / group push button.
    --> Click on Customer Warranty
    --> Click on select button.
    These are steps.
    Sanjeev Dhavan

  • In MIRO i am getting error message " vendor is not invoicing party in STO

    Dear All,
    i create one STO MM. This is plant to plant transfer STO. i entered few conditions. for this conditions i mentioned Vendor in condition detail.
    at the time of MIRO i am getting error message vendor is not invoicing party in PO ( STO).
    i checked the vendo master. all partner function are maintained.
    so please guide me
    Thanks
    h shah

    HI,
    Check u had done the below steps,
    Create STO and  input the freight/delivery costs in PO and assign the Transporter or Freight Vendor to the conditions by clicking on "Details" button in Conditions Tab
    For that you have to do following settings;
    Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > Here select "UB" and copy to a new PO Doc type.
    In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (New One) and Supplying Plant.
    Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
    You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08
    After STO, do Outbound delivery in VL10D, then GR in MIGO and then go for LIV w.r.t. STO in MIRO
    Here select "Planned Delivery Cost" and do necessary procedure.
    Regards
    KK

  • Assigning suppl. plant to vendor in vendor master (STO)

    Hi All
    I am working on STO with delivery , please tell me where to Assign Vendor No. to the Supplying Plant in vendor master. i have checked all the views but have not found supplying plant in vendor master.
    Tks
    Anjan

    Hi Yogesh,
    I was surprised to see three different postings all saying the same thing.
    I was even MORE surprised when I saw yours added.
    LOL
    (I have done this myself too)
    But instead of deleting it the best way to hide your message (or should I say embaressment?) is to just click on the edit button (next to the reply) and change the message to blank or simply say "reply removed" or similar.
    Cheers
    Steve B

  • Supplying Plant field is not appearing in vendor creation of receving plant

    Dear Friends,
    Iam configuring Cross Company Scenario to my  client for the version SAP 4.6C as they implemented a new company code and want to transport the material from one company code to another company code.
    I made all the required customizations in the system
    while creation a vendor code in the reciving plant in Pur.Org.Data screen->Extras--> Add.Pur.data i am unbale to view plant field where we maintail supplying plant
    In OMSG at purchasing data at add purchasing data PLANT, vsr relevacne & plant relevance made optiional
    but while creation of vedor code the other two VSR relevance and Plant relevance indicators are populating but the PLANT field is not appearing.
    without this assignment while creating a STO, shipping data tab is not appearing
    Please Provide me input in solving this error.
    Thanks inadvance
    Regards
    Srini

    Dear Srini Behara
    The field selection is controled at Vendor accounting group.
    For Vendor account group (std 0001) , the field Plant in additional Pur data is supressed whereas for accounting group 0007 this field is activated.
    Please rfer the following path to activate the field
    SPRO--> Financial accounting --> Account receible and Payable --> vendor accounts --> Master data --> Prepataions for creating vendor master data --> Define account groups with screen layout
    Select the Vendor account group and go to Purchase org data and change the Plant filed option.
    Or create teh Vendor under accounting group Plant (0007 std)
    warm regards
    Ramakrishna

  • Vendor from external Catalog not assigned to PM Order

    Dear Experts,
    When connecting to an external catalog from Plant Maintenance in SAP, we are having issues receiving the vendor master number even though it is coming back in the NEW_ITEM-VENDOR in the OCI interface; it is not assigning the vendor in the Order.
    - Did anyone have this issue before?
    - Any suggestions on what might be going on?
    Thanks & regards,
    José Omar

    Hello Chandra,
    Please check your external catalog transfers NEW_ITEM-VENDOR value. If the external catalog is single supplier catalog you can maintain Business Partner in catalog ID detail customizing.
    Regards,
    Masa

  • Info Record - Error Message "Company Code not assigned to Country"

    Hi,
    I am a beginner in SAP MM.
    I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location.  While saving the data error message is being displayed as "Company Code not assigned to Country".
    Please let me know the reason for this error.
    Thanks,
    Vinod.J

    Hi Vinod,
    The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
    Check whether customizing given in below link is done,
    http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
    Regards,
    Pravin

  • STO not working for plants of same company code assigned to a Purchase Org

    We have two company code ( A & B ) assigned to a single Purchase Org .
    when we are trying to do STO of company code A , we are getting an error message like that
    The plant you have entered does not belong to the company code that was
    determined via the purchasing organization.
    Any suggestion please. we assigned all the plants to the Purchase Org .
    Thanks
    JJ

    Hi,
    While creating STO you are entering the plant.
    Please check whether that Plant is assigned to the Company code A Error message clearly tells you have assigned the Plant to the company code A
    G.Ganesh Kumar

Maybe you are looking for