Messages issue with the first attempt

I've a problem every time i open Messages on my Mac and send the first message. The first attempt fails but when i try again it's all right. I reinstalled all the OS Mountain Lion again but the problem persist. ***??
Thks.

  for the Points
7:30 PM      Tuesday; July 2, 2013
  iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

  • [svn] 4488: Attempt to fix the heap-space issue with the doc target.

    Revision: 4488
    Author: [email protected]
    Date: 2009-01-12 12:10:58 -0800 (Mon, 12 Jan 2009)
    Log Message:
    Attempt to fix the heap-space issue with the doc target.
    Also removing some unused code.
    QE Notes: None
    Doc Notes: None
    tests: checkintests
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/build.xml
    flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
    flex/sdk/trunk/frameworks/projects/flex/build.xml
    flex/sdk/trunk/frameworks/projects/flex4/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/haloclassic/build.xml
    flex/sdk/trunk/frameworks/projects/rpc/build.xml
    flex/sdk/trunk/frameworks/projects/utilities/build.xml
    flex/sdk/trunk/frameworks/projects/wireframe/build.xml
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    Removed Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/PumpStreamHandler.java

    1. Tell more about it, e.g.: OS, a sun jdk or a ibm jdk? 32-bit or 64-bit?
    for ibm jdk, look for *.hpd file within the dir.
    for sun jdk, add startup option -XX:+HeapDumpOnOutOfMemError
    Then analyze them with heap analyzer.
    2.MaxPermSize=1024m so big space for class files, really necessary?

  • FaceTime never works on the first attempt

    I'm surprised I don't see anything mentioned on these forums yet, because I know more people that have these problems:
    Whenever I try to call via FaceTime, and the other person answers, the call get's stuck in the "Connection…" state for minutes. The second attempt is more likely to work, but it doesn't always, either. In some cases the first attempt is not even seen by the other person, even though I don't get an error message on my side. I think initiating the call on the receivers side should be more or less a push notification, right? These work fine in other applications, as far as I can tell.
    My guess is that this might be somewhat network related, but the connection speed on both sides should be more then enough, and the call quality, once it starts working, is fine. I wonder if I can do some diagnosis on the connection, or if that's not where the problem is in the end?
    Cheers,
    Daniel

    so effectively it's on a different drive, sort of
    But still using the same reader heads as your primary drive. So technically, it's still the same drive.
    I just cut a 4 angle music video last week using my MacPro at work, and even with the source media on a FW800 G-Raid, I was still getting delayed playback and couldn't even view the 4-up display when playing back. So I moved the project to our XSAN, and with the fibre backbone there, bandwidth was definitely increased.
    So the other variable in this problem is bandwidth as well as RAM. I know that a fibre based storage system isn't in everyone's budget, but I'd recommend trying out an eSATA based drive, given that I had trouble with 4 streams over FW800.

  • Workspace page doesn't render on the first attempt, but on the second

    We have a clustered environment where users log into the Big IP load balancer. Local users are able to access the Workspace URL without a problem from within the company. Users out of state and out of the country are not able to connect successfully on the first attempt about 85% of the time, but are able to on the second attempt after killing their browser session. Their session just hangs without rendering the login screen on the first attempt. They are usually able to log in without a problem the rest of that day. We have performed some tests and asked a few users to bypass the load balancer and hit the servers directly, and they have a better success rate of receiving the log in screen.
    I am a local user and this is also an issue when trying to connect remotely to the Workspace page. It eventually times out and I receive the following message:
    "_execScript::Error loading file './js/com/hyperion/bpm/web/common/format/Format.js' Error The operation was timed out".
    Has anyone ever experienced this issue? I would appreciate any suggestions. Thanks!

    Hello L Swarz,
    Thank you for the details of the issue you are experiencing when downloading your purchased song to your iPod nano.
    I am not sure if you have tried these specific steps, but I recommend downloading the purchased song to iTunes on your computer using the steps in the following article:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • 10.4.11 Has Apple addressed/fixed issues with the latest update to Tiger?

    Like many of you, I installed the 10.4.11 update last weekend with disastrous results. I eventually had to Archive and Install and my machine seems to be recovered. Has anybody had this problem and gone on to try the update a second time with better results ?? Any words of wisdom?? or had some sort of feedback from Apple to indicate they have or are going to resolve the problems with this update.

    +I just posted this on the thread that seemed geared to those who "had success" (many more than half had issues) with the recent update after pi55ing and moaning due to crashing several times while trying to post there. Subsequently I found this thread and a bit of absoultion. I have eliminated the links, thinking them redundant but they are posted to that thread.+
    "If stupidity got us into this mess, then why can't it get us out?" "
    - Will Rogers (1879-1935)
    A little story, when I first tried to install Jaguar on my then Beige (Yeah, remember them!) G3 MT, it took me a full six months to get that "Darn Cat" in that house! Oh, how I sweated and swore, you talk about "legacy", I waved every "dead chicken" that was suggested to no avail. Ended up that before I bought the unit someone had switched out the CD/ROM for one from one year later, still Apple issue, mind you. I sent to OpAmp and got an original and "The Cat" slid in as quick as grease through a goose. That's how tightly wound Apple was and still is in many ways and is why they stopped the clones. This was one of a slew of many little things you had to get used to in "Mac Land".
    One other small thing you used to do a "clean install", you still can, but under OS 9, after you were satisfied (Conflict Catcher made things ever so easy!) all was peachy, you could simply trash your Previous System Folder and get back some valuable disk space. Well not to long after my success with the install of Jaguar and still not understanding OS X at all, I was still working mainly in OS 9, I did a Clean Install on my OS X, horsed around with settings which was difficult without Conflict Catcher and bravely trashed my Prev Sys Folder. Don't ever, EVER do that. What is a seemingly empty shell but for redundant Apps and meaningless abbreviations, is indeed a necessary if gigabyte eating Albatross you are doomed to carry!
    My point with these two parables is that we are creatures of trust and habit, living on borrowed time. We have been blessed with a computer system that is virtually foolproof given certain caveats, caveats if adhered to even marginally would guarantee success. I my self have gotten into some very bad habits of late and think that this may be the cause of my computers malaise.
    Drop to your knees and be grateful you don't have a PC (shudder!)! Yes Virginia, there is an Insanity Clause! I just installed WinXP on an Intel Mac, and after it was over all I wanted was a stiff drink and a shower!
    +There's always something worse than he77, there's always Vista!+
    Message was edited by: fla_cracker

  • I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

    i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
    i have told them nuumerous times that for better understanding i have made a video of it but no response..
    really disspointed with your customer support.
    i have uploaded them in google docs..links below.. t
    he first one happened on 30th of april 2014   https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
    the second happened today. i called customer care but no satisfactory respose either.  https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
    who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
    its still under warrenty. please help.

    Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
    If you cannot take it person contact them to determine how to send them your phone.
    You can't expect them to replace your iPhone without first examining it.

  • Issues with the Nokia N96????

    Im currently on a contract with THREE network here in england. I am due my upgrade, and I was planning to go from the N95 to the N96 - on paper it looks like an awesome handset.
    Ive been into my network suppliers shop today to ask about the N96, and was warned by the manager in the shop that Nokia have ceased shipping these handsets to them due to complaint and problems with the processor on the handset.
    Ive been warned by several people that the handset is very slow, freezes up when performing anything demanding, or even when trying to find a file on the handsets internal memory and thats its just not fast enough.
    The manager in the Three shop told me that there is an issue with the processor not being powerful enough for the phone, and the amount of memory the phone has. He also said that software teams across most UK networks were working around the clock on a software update to paper over the cracks, but he reckoned that this wouldnt fix the problem completely, as the chip is just not up to scratch full stop.
    I just wanted to find out how true everything he is saying actually is. I know first hand from people I know who own them that this handset is infact really quite slow, and Im now put off owning one at all. If there is someone in the know actually from Nokia reading this, your replies would be appreciated I really want this phone and have done since I heard about it, but Im not prepared to risk signing a new 18 month contract with my network, and then end up with a handset which is not fit for purpose!
    Cheers
    Message Edited by cleggsta on 10-Feb-2009 05:02 PM

    The N96 as shipped with the v10 firmware had major issues.
    The v11 update fixed most of these and the v12 was a further improvement.
    Your shop manager is lost about what is happening with the firmware. The networks themselves don't write it or fix problems, instead nokia provides them with the updates and they alter them with there own network branding, add apps etc. before allowing Nokia to make it available to those who hold there branded handsets, some of these alterations have made the problems worse.
    Because it takes the networks time and money to do this to every firmware patch they are sometimes slow to release or don't release at all.
    Note that it is rumoured that Nokia are working on the v20 update but no release date has even been rumoured yet

  • Lan issues with the K8N NEO4 Platinum NF4U 939 Motherboard

    New K8N NEO4 Platinum NF4U 939 Motherboard. 
    After three or four hours the connection started to get unstable.  I am a high end gamer and any net slowdown I see and feel.   
    Using my "Ping Plotter" program i saw the issue.  The first hop to my router was going from 0 to 47ms.  On all of the other conputers on this network hop one stays at 0.
    In looking at the over all ping to my game server I noted that when hop 0 went to 47 it messed up all of the other hops and made the connection to my game server unstable.
    The odd thing is I bypassed the onboard nic's and installed a PCI nic and it did the same thing.
    I got with MSI and they had ne updare the NVIDA drivers.  This lowered the swing to 0-17.  I removed the PCI lan and am now back with the onboard nic.  I have replaced the DSL modem, cable and removed the dlink and the issue is still the same.
    This is my first computer with XP and at this point I do not know if this is an XP issue or a driver issue. 
    In installing a pci nic some of the network control is still done on the motherboard so that does not rule out a motherboard/chipset driver issue.
    I have set up a web site that shows screen shots of the ping plotter.  Please take the time to look at them and tell me what you think.
    http://webviper.com/LanIssues.htm
    Thanks for your help.
    Regards,
    WebViper

    Hello !!
    Please give more information about your system specs.
    But i would try the following:
    Download the latest nforce and vga drivers from nvidia ( if you are using nv VGA card ? ). Google for "driver cleaner" and download it.
    Restart system and press F8 to enter safe mode. Now uninstall all nvidia drivers(chipset & VGA), and run Driver Cleaner after it. Select the nvidia tabs and remove them....
    Now reboot, when prompted to install new drivers cancel this process. And start nvidia chipset driver setup, install all drivers but do not install the IDE driver from nvidia, you will be prompted for this.In first attempt you should not install nvidia firewall. Restart and install VGA drivers. Now test again your network connection. I hope it helps.... 
    Greetz

  • Design issue with the multiprovider

    Design issue with the multiprovider :
    I have the following problem when using my multiprovider.
    The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
    And from another s-system I am also loading the masterdata for IobjectA
    Now I have created the multiprovider based on the cube and IobjectA.
    However, surprisingly join in not workign in multiprovider correctly.
    Scenario :
    Record from the Cube.
    IObjectA= 1AAA
    IObjectB = 2BBB
    IObjectC = 3CCC
    Records from IobjectA =1AAA.
    I expect the record should be like this :
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    However, I am getting the record like this:
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    1AAA         : #             :#
    In the Identification section I have selected both the entries for IobjectA still I am getting this error.
    My BW Version is 3.0B and the SP is 31.
    Thanks in advance for your suggestion.

    May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
    My Expectation from Multi Provider is :
    IObjectA
    1AAA
    (From InfoObject)
    Union
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    (From Cube)
    The record in the multiprovider should be :
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
    http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
    Thank you very much in advance for your responses.
    Best Regards.,
    Praveen.

  • Issue with the App Store showing up blank.

    Issue with the App Store, it will not let me search for new apps.  The screen is blank.  The update section and features section works, but it will not let me search for new apps. I have restarted my phone and no changes. The newest update to the iphones when the iphone 5 came out, i think, messed up this app.  When i am looking at how to fix it, it tells me to delete it and try again, but the App store is not a deletable app.  Any ideas why my App store, specifically the search section of this app doesn't work?

    I suspect it is on Apple's side of things. Mine was blank too, but now it works again. Fixed itself one morning.
    https://discussions.apple.com/message/19659161#19659161

  • Performance issues with the Vouchers index build in SES

    Hi All,
    We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
    As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
    We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
    The index creation process runs for over 5 days.
    Can you please share any information or issues that you may have faced on your project and how they were addressed?

    Check the following logs for errors:
    1.  The message log from the process scheduler
    2.  search_server1-diagnostic.log  in /search_server1/logs directory
    If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

  • Performance issues with the Tuxedo MQ Adapter

    We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
    Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
    135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
    I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

    Hi Todd,
    We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
    Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
    However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
    This is our configuration:
    "MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
    CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
    RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
    SYSTEM_ACCESS=FASTPATH
    MAXGEN=1 GRACE=86400 RESTART=N
    MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
    SICACHEENTRIESMAX="500"
    /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
    *SERVER
    MINMSGLEVEL=0
    MAXMSGLEVEL=0
    DEFMAXMSGLEN=4096
    TPESVCFAILDATA=Y
    *QUEUE_MANAGER
    LQMID=QMTESX01
    NAME=QMTESX01
    *SERVICE
    NAME=txgralms0
    FORMAT=MQSTR
    TRAN=N
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
    Thanks in advance,
    Marling

  • I have an issue with the address browser in mail in Yosemite

    I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
    Previously in my pending to send email toolbar there was a contacts icon which I clicked  on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
    Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
    An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
    This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
    Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
    I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
    Any suggestions?
    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    Cheers,

    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

  • Can I allow two attempts and after the first attempt have a new window open to a url?

    I would like to allow the user two attempts to answer a question. However, after the first attempt, if they get it wrong, I would like a new window to open that takes them to a tutorial Web site we have, where they can find the answer. Then I would like them to be able to close that window and return to the question for the second attempt?
    Is this possible?
    Right now, I have designed a very clunky version of this. I have one question slide with one attempt and if they answer wrong, they go to the next slide, which has a button to the tutorial page. Then the same question slide is repeated, again with one attempt. In this same scenario, if the person got the question right the first time, they moved on to a new question slide. This works, but is bad for scoring and eliminates the possibility of using question pools and putting questions in random order.
    Thanks,
    Carrie

    100 feet would normally not be a problem......if the AirPorts have line-of-sight with each other......but if there are obstructions like walls, ceilings or furniture in the direct signal path between the AirPorts, little if any of the signal will even reach the extending AirPort.
    Try locating the extending AirPort at about 50-60 feet away to see if can pick up a stronger signal to extend.
    It would be much better if you connect the AirPorts using an Ethernet cable, as there is no signal loss in an Ethernet cable up to 300+ feet.

  • I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts.

    I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?

    The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it.  But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod.  If you restore from backup, the cache is also restored.
    This article shows you the screens you will see during the restore:  http://support.apple.com/kb/HT1414

Maybe you are looking for