Metadata doesnt remove when creating a dynamic package in SSIS

Hi All,
I am creating dynamic packages using SSIS but it doesnt remove the metadata from the created packages. Kindly advice.

Could you give an example where you have the issue?
Basically, when you create the package you have to be careful with connection manager settings and column metadata that flow from Source to Destination. All columns should have matching datatypes with correct length.
I assume that you are using package configurations. So have look at there as well. Connection strings should be replaced with appropriate configuration values.
-Vaibhav Chaudhari

Similar Messages

How to make metadata fields required when creating folders

Hello all....
Related issue with SR 3-6472229431 and SR 3-6471130611.
We're using DIS 11.1.6 64-bits (2011_11_29 (rev 9756) 11.1.6.97) in a Windows 7 64-bits workstation (with UCM 11.1.1.5 in a Linux machine). The check-in of images to UCM goes fine.
I'm trying to make some metadata fields required when creating a folder. These fields are required when making a check-in, but not when creating folders.
Folders_g is enabled. DesktopTag too.
EDIT: Patch: 14695303 - WCC 11.1.1.5.0 BUNDLE ( MLR 16 ) NOV 6 2012 applied.
Is it possible?
Thanks for all.
Edited by: fgomes on 22/11/2012 03:24

After reading your response and rereading the original question a bit closer, the metadata prompting feature does not apply to creating new folders, only content.
Again, though, I think the focus here is in the wrong place. The metadata applied to a folder is intended to be ultimately applied to the content. You can build global rules that fire on submission of content to check if a field has a value, and throw an error if the value is empty.
If you expect users to create folders (and actually apply any metadata to the actual folder itself), you will be disappointed. Experience shows that users are not interested in that level of detail when creating content, let alone folders. Letting typical users create folders is a bad idea anyway, as they tend to create the same inefficient folder structures they previously created in file shares within Content Server.
If you need to tightly control folder attributes, you'll be better served by locking down the ability to create new folders. Otherwise you're looking at some type of customization. Keep in mind that you won't be able to customize the right click behavior of DIS. Any changes to DIS would have to be an enhancement request.

Attributes being removed when creating a Purchase Order

Hi,
We are running SRM 4.0 ECS.
I have an issue when creating a PO directly (BBP_POC).
When I have enter the item line information and then go details to enter a G/L account, the attributes UOM and Gross Price are removed. I need to go Back to Item overview to fill them in again. If I do it in Item detail in the Basic data tab, the attribute data keeps on being removed.
Does anyone know why this happens?
Message was edited by:
Anders Halmind
Message was edited by:
Anders Halmind

HI,
That means the PO print program is using some table (EKKO, EKPO,KONV and may be other for condition record) to get the value of the PO.
now those table get updated only after you save the PO.
That's the reason you are not getting any value in print preview before saving.

Reference loss when created by Dynamic VI

Hello,
I am actualy designing a program using a Model-View-Presenter Template.
Views and presenters are contretized by dynamic lauched Vis.
Models are shared between Presenters using LV References.
Main models are instantiated by the main presenter. Others models, that might belong to main models can be instantiated by sub presenter within sub presenter thread.
Using execution-trace I noticed that all references created in sub presenter thread are destroyed when thread stops.
That is very annoying because the aim of sub presenters is to modifiy and eventualy create sub models. And if sub models can not be reused after sub presenter is destroyed, my design pattern will never work.
Does anybody ever met this situation?
Is there any way to ask labview runtime to keep valid references created in dynamic launched VI when this one stops?
thanx for answer.
Pierre

And reference creation goes that way :
Then I have to cast reference for specific models.
Now it's time to make a f****** script to automaticaly modify my 50 model classes already created.
thanx for you help.

The "Adobe Reader 11.0.08 security update - All languages" is not working with "Adobe Reader 11.0 - Multilingual (MUI) installer" using msiexec when creating an msi package. is there going to be a release of Adobe Reader 11.0.08 update - Multilingual (MUI

Is it possible to create an msi package if the product you are upgrading is Multilingual (MUI) and the update(msp) you are applying is not Multilingual (MUI) but "All languages"?

Please download the latest Adobe Reader patch from the below mentioned location, it will work with MUI installer.
ftp://ftp.adobe.com/pub/adobe/reader/
~Deepak

Javascript error occurred when create a dynamic table

Hi all,
I try to create a dynamic table using the created recordset,
but I get the javascript error message "While executing insertObject in DynamicTable.htm, a Javascript error occurred."
How to fix it? I tried to delete the cache file in Configuration folder but it is not work..
Any idea? Thanks a lot!

http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
Try 12 & 4 and then go through the rest.

How to specifiy the provider to be Oracle.ManagedDataAccess.Client when creating a dynamic connection string with EF Code First from Database?

I am trying to use the relatively new Code First from Database with the newest EF (6.x) and on an Oracle database (11g, but I have installed the newest ODTwithODAC). First of all, it works fine as long as the connection string is inside the App.Config file. But when I try to build it dynamically in the C# code (or rather, statically at the moment) it fails. I have it working with a dynamically built connection string when doing Model from Database though, so I'm at a loss right now.
First, I have created a second constructor for the context class that takes a string and does base(connectionString). Then I build the connection string via
OracleConnectionStringBuilder oracleBuilder = new OracleConnectionStringBuilder();
oracleBuilder.DataSource = "TEST.BLA.COM";
oracleBuilder.UserID = "ABC";
oracleBuilder.Password = "abc";
oracleBuilder.PersistSecurityInfo = true;
string connection = oracleBuilder.ToStrin();
Now trying to open an EntityConnection by giving to it this provider-specific connection string (or even the static one from the App.Config) doesn't work; I get "keyword not supported: user id"). Trying it by creating a context and giving this connection string doesn't work either. I'm pretty sure that this is because I didn't specify the provider to use; after all, it should use the Oracle.ManagedDataAccess.Client provider and not an SQL Server based one.
I then tried to get around this by using an EntityConnectionStringBuilder on top and specifying the provider keyword there, but then I get "keyword not supported: provider" when using it in the context constructor, and "the 'metadata' keyword is always required" when using it with the EntityConnection constructor.
As I said above: I bet it's the provider that I have to specify somehow, but I don't know how. The code that does work is the following:
using (var context = new Model())
context.Database.Connection.Open();
context.Database.Connection.Close();
When I read context.Database.Connection.ConnectionString, it is exactly the provider-specific connection string I created above, but I don't know where to specify the provider again. Do you know of any way to do this? Certainly there must be one.
PS: I have also posted this question on http://stackoverflow.com/questions/27979454/ef-code-first-from-database-with-managed-oracle-data-access-dynamic-connection because it is quite urgent and I'd like to use Code First from Database. Otherwise I'd have to go "back" to using Model from Database again, which is not ideal because we have updatable views where the .edmx-file has to be edited after every reload of the model, while with Code First from DB inserting into the view automatically works.

I am trying to use the relatively new Code First from Database with the newest EF (6.x) and on an Oracle database (11g, but I have installed the newest ODTwithODAC). First of all, it works fine as long as the connection string is inside the App.Config file. But when I try to build it dynamically in the C# code (or rather, statically at the moment) it fails. I have it working with a dynamically built connection string when doing Model from Database though, so I'm at a loss right now.
First, I have created a second constructor for the context class that takes a string and does base(connectionString). Then I build the connection string via
OracleConnectionStringBuilder oracleBuilder = new OracleConnectionStringBuilder();
oracleBuilder.DataSource = "TEST.BLA.COM";
oracleBuilder.UserID = "ABC";
oracleBuilder.Password = "abc";
oracleBuilder.PersistSecurityInfo = true;
string connection = oracleBuilder.ToStrin();
Now trying to open an EntityConnection by giving to it this provider-specific connection string (or even the static one from the App.Config) doesn't work; I get "keyword not supported: user id"). Trying it by creating a context and giving this connection string doesn't work either. I'm pretty sure that this is because I didn't specify the provider to use; after all, it should use the Oracle.ManagedDataAccess.Client provider and not an SQL Server based one.
I then tried to get around this by using an EntityConnectionStringBuilder on top and specifying the provider keyword there, but then I get "keyword not supported: provider" when using it in the context constructor, and "the 'metadata' keyword is always required" when using it with the EntityConnection constructor.
As I said above: I bet it's the provider that I have to specify somehow, but I don't know how. The code that does work is the following:
using (var context = new Model())
context.Database.Connection.Open();
context.Database.Connection.Close();
When I read context.Database.Connection.ConnectionString, it is exactly the provider-specific connection string I created above, but I don't know where to specify the provider again. Do you know of any way to do this? Certainly there must be one.
PS: I have also posted this question on http://stackoverflow.com/questions/27979454/ef-code-first-from-database-with-managed-oracle-data-access-dynamic-connection because it is quite urgent and I'd like to use Code First from Database. Otherwise I'd have to go "back" to using Model from Database again, which is not ideal because we have updatable views where the .edmx-file has to be edited after every reload of the model, while with Code First from DB inserting into the view automatically works.

How can I avoid running out of memory when creating components dynamically

Hello everyone,
Recently, I am planning to design a web application. It will be used by all middle school teachers in a region to make examination papers and it must contain the following main functions.
1)Generate test questions dynamically. For instance, a teacher who logs on the web application will only see a select one menu and a Next Quiz button. The former is used for determining the number of options for the current multiple/single choice question. The later is dedicated to creating appropriate input text elements according to the selected option number. That is to say, if the teacher selects 4 in the menu and presses the Next Quiz button, 5 input text form elements will appear. The first one is for the question to be asked such as "1.What is the biggest planet in the solar system?", the others are optional answers like a)Uranus. b) Saturn. c)Jupiter. d)Earch. Each answer stands for an input text elements. When the teacher fills in the fourth answer, another select one menu and Next Quiz button will emerge on the fly just under this answer, allowing the teacher to make the second question. The same thing repeats for the following questions.
2)Undo and Redo. Whenever a teacher wants to roll back or redo what he has done, just press the Undo or[i] Redo button. In the previous example, if the teacher selects the third answer and presses the Delete button to drop this answer, it will delete both the literal string content[i] and the input text element, changing the answer d to c automatically. After that, he decides to get back the original answer c, Jupiter, he can just click the Undo button as if he hadn�ft made the deleting operation.
3)Save the unfinished working in the client side. If a teacher has done half of his work, he can choose to press the Save button to store what he has done in his computer. The reason for doing so is simply to alleviate the burden of the server. Although all finished test papers must be saved in a database on the server, sometimes the unfinished papers could be dropped forever or could form the ultimate testing papers after several months. So if these papers keep in the server, it will waste the server computer�fs room. Next time the teacher can press the Restore button on the page to get the previously stored part of the test paper from his own computer and continue to finish the whole paper.
4)Allow at least 1,000 teachers to make test papers at the same time. The maximum question number per examination paper is 60.
Here are my two rough solutions,
A.Using JSF.
B.Using JavaScript and plain JSP[b] without JSF.
The comparison of the two solutions:
1)Both schemas can implement the first and the second requirements. In JSF page I could add a standard panelGird tag and use its binding attribute. In the backing bean, the method specified by the binding attribute is responsible for generating HtmlInput objects and adding them to the HtmlPanelGird object on the fly. Every HtmlInput object is corresponding to a question subject or an optional answer. The method is called by an actionListener, which is registered in the Next Quiz commandButton, triggering by the clicking on this button in the client side. Using JSF can also be prone to managing the HtmlInput objects, e.g. panelGird.getChildren().add(HtmlInput) and panelGird.getChildren().remove(HtmlInput) respond to the undoing operation of deleting an optional answer and the redoing operation of the deleting action respectively. I know JavaScript can also achieve these goals. It could be more complex since I don�ft know well about JavaScript.
2)I can not find a way to meet the third demand right now. I am eager to know your suggestion.
3)Using JSF, I think, can�ft allow 1,000 teachers to do their own papers at the same time. Because in this scenario, suppose each questionnaire having 60 questions and 4 answers per question, there will be approximately 300,000 HtmlInput objects (1,000X60X(4+1)) creating on the server side. The server must run out of memory undoubtedly. To make things better, we can use a custom component which can be rendered as a whole question including its all optional answers. That is to say, a new custom component on the server side stands for a whole question on the client side. Even so, about 60,000(1,000X60) this type of custom components will be created progressively and dynamically, plus other UISelectOne and UICommand objects, it also can�ft afford for most servers. Do I have to use JavaScript to avoid occupying the server's memory in this way? If so, I have to go back and use JavaScript and plain JSP without JSF.
Thank you in advance!
Best Regards, Ailsa
2007/5/4

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

How can extra tags be removed when creating web services

Greetings,
If the "tables" of the function call (which a web service is generated from) has all the returned values with the correct tag but it also has the tag for the table name, how can the table name tag be eliminated before submitting the message?
Here is the scenario: can create a function call and generated a web service from it. The import and export values have the proper tags. However, the return values needs to be in a table. when the message is generated,
- tags for each value in the returned table is generated also
- tags for the table name is also generated. in the below example, how can the tags for <ttable> </ttable>and <item> </item> be removed prior to submitting the message?
FUNCTION zquery
IMPORTING
 VALUE X TYPE X1
EXPORTING
 VALUE(RETURN) TYPE BAPIRET2
TABLES
 Ttable STRUCTURE zstructure
soap generated:
<Ttable>
<item>
<title></title>
<FirstName></FirstName>
<MiddleName></MiddleName>
<HouseNumber></HouseNumber>
<Street></Street>
<City></City>
<State></State>
<Zip></Zip>
</item>
</Ttable>
Thank you in advance for any suggestions
B.A.

If you click the bookmarks menu item in the window, on the left, you should be able to select and delete the separators, on the right.

Why is the metadata being removed when I export videos from Lightroom?

I have a video with several virtual copies each trimmed to play a different clip from that file. Each of those clips (virtual copies) is tagged according to the content. I then export the clips with the intent of deleting the original file (which is mostly footage I don't want to keep). But when I export the clips all the metadata is being removed. In the export profile I have it set to export all metadata, and I have it set to add new files to the current catalog.

I'm having the same issue with all videos, not just ones with edits. I can verify with exiftool the original capture time is not exported.

Data target is not available when creating an info package in BW

Hi,
I am not sure how, but I have accidentally deleted the info packages for one of the info sources. I have created init package successfully, but when I try to create a delta info package for the data mart, the data target( which is an info cube) is not appearing in the data target tab.
Any help in this issue is higly appreciated.
Thanks
Prashant

PRASHANT ASOPA , did you find a solution to this - I am facing a similar situation! I have tried almost everything including deleting and recreating the update rule, recreating the export datasource, activating everything a couple of times and of course cretaing and deleting info packages, but no matter what I do I can't get the system to recognize the data target.
The "funny" thing is that everywhere else, even in the "Show data flow" everything looks right!

Problems, when creating roles dynamically

Hi,
I have an application, in which roles and users are created programatically.
Now I have an EJB, that wants to call isCallerInRole() for every existing role.
As I create the roles dynamically, I cannot specify all roles in the deployment-descriptor of the EJB.
As a result I get a <010013> <EJB "MyBean" referenced an undeclared security role "myRole".> - warning,
and isCallerInRole() always returns false.
What do I have to write into the deployment-descriptor, to make the ejb aware of the dynamically created roles?
Thanks in advance
Christian Wulff

What you can do, is create an authorization profile (transaction pfcg) with these objects, and assign them to the user you are using for the trusted connection.
Kind regards,
Mark

Azure indexer for dynamic packaged asset

Hi I have an mp4 uploaded in the media services and I ran the Azure encoder to create a dynamic package of the video. I also ran the Azure indexer to create the index files for captions.
I am using the Azure Media Player using the iframe code below in my webpages, however I do not see the captions.
<iframe src="//aka.ms/azuremediaplayeriframe?url={mp4 url}" height="300" width="200" frameborder="0" allowfullscreen/>
I see the ttmland vtt files got created under the asset folder the source mp4 resided but nothing on the dynamically packaged asset. What is the correct way to reference the manifest to get the captions showing?
Thanks for any help.

Hi,
If you deploy the application to local Tomcat, can you access the site using root URL? The StackOverflow thread states it is needed to rename the war file to ROOT.war, and remove the out-of-the-box ROOT/ directory. Please double check whether you have done
that. You may also want to refer to
http://tomcat.apache.org/tomcat-7.0-doc/config/context.html, where it states:
The context path of this web application, which is matched against the beginning of each request URI to select the appropriate web application for processing. All of the context paths within a particular Host must be unique. If you specify a context path of
an empty string (""), you are defining the default web application for this Host, which will process all requests not assigned to other Contexts.
This attribute must only be used when statically defining a Context in server.xml. In all other circumstances, the path will be inferred from the filenames used for either the .xml context file or the docBase.
Even when statically defining a Context in server.xml, this attribute must not be set unless either the docBase is not located under the Host's appBase or both deployOnStartup and autoDeploy are false. If this rule is not followed, double deployment is likely
to result.
And this link(http://stackoverflow.com/questions/16160565/configure-the-path-localhost-of-the-war-application-to-be-the-root-java-ee
) may help you.
Thanks.
Will
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Why a semi-colon is not enough when creating packages and package bodies?

Hi,
I'm struggling with a quite simple problem - when creating a package header and body in the same script, it does not work as expected. See for example this very simple package:
CREATE OR REPLACE PACKAGE mypackage AS
PROCEDURE test_proc(id INTEGER);
END mypackage;
CREATE OR REPLACE PACKAGE BODY mypackage AS
PROCEDURE test_proc(id INTEGER) IS
BEGIN
NULL;
END test_proc;
END mypackage;
When executed from JDeveloper (or sqlplus), the package is created but with a "PLS-00103: Encountered the symbol CREATE" error. It seems Oracle does not recognize the script contains header and body, and uses the whole script as a header (which is obviously wrong).
If modified so that there are "/" everything works fine:
CREATE OR REPLACE PACKAGE mypackage AS
PROCEDURE test_proc(id INTEGER);
END mypackage;
CREATE OR REPLACE PACKAGE BODY mypackage AS
PROCEDURE test_proc(id INTEGER) IS
BEGIN
NULL;
END test_proc;
END mypackage;
Why is this necessary? Why Oracle does not recognize that "END mypackage;" actually ends package header definition, and combines it with the body definition into an invalid block? I've thought semicolon is a valid separator, so why is the "/" necessary?
It does not work even when I try to run the statements separately (from the same worksheet in Jdeveloper) - first select the header block, hit F9 (execute statement), then repeated the same for body. In this case both header and body are created, but are invalid because the last semicolon is removed from them (so it's not possible to compile them).

For that to work, the SQL engine would have to understand PL/SQL syntax. Only the PL/SQL compiler knows when all the END statements have matched up with their corresponding declarations, and it doesn't do CREATE statements. I guess it could detect that the compilation unit it started has finished and pass any text left over back up to SQL to have another shot at. I'm not sure that's reasonable. There is no other example in SQL where one CREATE statement can turn into two - e.g. you can't send a block of CREATE INDEX statements together and expect the database to parse them out into separate commands.
Edited by: William Robertson on Jun 6, 2009 6:49 PM
Edited by: William Robertson on Jun 6, 2009 6:51 PM
Added example about indexes.

How to create a dynamic SSIS package for multiple flat file destinations

Hi,
I have to create a ssis package which has single data flow task and inside that I have 23 source (sql- select * from - statements)- destination (flat files, 23 distinct) connection.
Now for each product I have to create separate SSIS package (i.e. if prod=abc then these read select * from abc_tables and 23 abc_ txt files)
I want to do it dynamically, means only single package and inside that variables will take select * values for each source-dest connection (so i believe 23 variables) and same for destination flat files.
Let me know. :)
ANK HIT - if reply helps, please mark it as ANSWER or helpful post

Sorry It seems you're contradicting yourself. you say I know my source and dest structure and the you're
asking all I want is to have a dynamic structure
what does that mean?
and reading your next sentence
I want to run a package for 5 products, instead of creating 5 ssis packages with 23 source- dest connection, I would
like to have one with only 23 source- dest connections
What I feel is what you're looking for is to have a looping structure to loop through each of the 5
products.
In that case what you could do is this
1. Create a object variable in SSIS
2. Use a Execute SQL Task to populate the variable with all available products (I think you'll have a master table for that). Set ResultSet property to Full ResultSet and then in ResultSet tab map Object variable to 0 th index
3. use a ForEachLoop container with ADO .NET recordset enumerator and map to object variable. Create a variable of datatype same as that of Product identifier field to get individual values out
4. Inside loop create your data flow task with 23 source destination connection. In the query part use a parameter for product field and map it to the variable containing product value to get only data for the product.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Metadata doesnt remove when creating a dynamic package in SSIS

Similar Messages

Maybe you are looking for