MFE on 6120 classic - configuration tool / bulk co...

We have a number of 6120 we need to configure for MfE and don't really want to sit there and configure them by individually by hand. Would prefer say SMS, or using a PC based app. to do so.
Have downloaded the configuration tool (v5); which recognises the phone, but errors when a profile is imported or exported to it.
the phone has firmware 6.01 on it.
Is there any easy - and cheap - way to bulk configure these - most items, such as the mail server, domain, access point are the same, the variations are user name, pw, email (and even then we know the user name and email).
don't really want to set up a lot of back end infrastructure to do this.
any ideas etc appreciated.

Similar Messages

Cisco dynamic configuration tool

Currently cisco dynamic configuration tool is not working. What can I do?

Richard,
The power supplies in the 6120 / 6140s are auto sensing for 120-240 VAC. Please see Table 9 in the Nexus 5000 document for all supported cables:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-461802.html
Thank you,
Matthew

6120 Classic and Mac

I was just wondering if anyone has been able to use iSync or any other application with this kinda new phone.
I would really appreciate to have the possibility to use all those syncing functions.
Last phone i had was an MS Smartphone and now i got and Nokia hoping better Mac support, but is it all just a empty wish?
Tom from Finland

when I first got my Nokia 6120 classic a week ago, I synchonised it to my windows PC at work using Nokia PC Suite. I did this at the time, as no iSync plugin was available for iSync on my iMac machine at home (running OS X Tiger).
I have since located and installed a plugin for iSync for the 6120 by following the instructions above. With the plugin installed, the phone is recognised on the Mac, and the synchronisation process can be configured and started. However it fails with a message 'synchronisation error, the synchronisation was cancelled by the phone' or something similar.
Is this because the phone cannot be setup to Sync with both PC Suite and with iSync? If so, I would like to disable synchronisation with PC Suite and only ever sync with the Mac via isync. How do I do this?
If all else fails, can I restore settings to the phone (preferably without removing applications and bookmarks that I have set if possible?)
Thanks for your help!
Chris

How do I view maps on the 6120 classic?

Hi all.
I have downloaded Nokia Map loaders and installed it on both the 6120 and the PC. I have also downloaded Nokia Maps and installed them on the Memory card via a card reader as instructed as I am told that the maps can not be installed onto the Symbian phone via a USB connection.
I have run the Nokia maps program on the Classic first before attempting to use maps as instructed.
It would appears that the downloads went well because both the installations took a bit of time as the progress bar went across the screen of the 6120.
When I tried to view maps, all I got was the world globe to load and from there nothing.
Just as a point as it may have a bearing. When I tried a Maps download via the PC and Nokia Map Loader, I got the usual gray panel with instruction on how to download, but when I clicked 'next' to got to the next phase where I was to select a country or district or whatever I was told that the connection to the server has been interrupted and to try again, and again, and again...you get the picture.
I found some instructions on the net:
"After installing the Nokia Map Loader application on your PC, start the application. First, choose the continent in the tab on the top of the application window. Then choose the country. Some small countries can be chosen completely, others have several sub-maps from which you have to choose the ones you want to install".
I have never seen this panel anywhere! I believe this is the one that is supposed to come after the gray instructional panel as I stated above.
What am I doing wrong?
I read that I do not need an Internet or GPS connection just to view maps (and that is all that I want to do) so why can't I view my maps, ANY maps?
So whatever I have so far downloaded to the memory card (and from memory is somewhere around 60 something MB, could be more, could be less)is at the moment doing nothing for me.
I really need help here please. :-(
Regards
Nokia 6120 classic
May the "Farce" be with you!

The 6120 classic puts freshly installed apps straight into the main menu.
Try to uninstall it from settings>app.mgr.
Manual removal of Nokia Maps is a pain in the a** because the files are spread all over c:\ with cryptic file names from the smart2go era, most of 'em in folders that you can only get into if you hack your copy of Symbian. It's easier to back up your contacts, messages and calender entries etc., then reset your phone and reinstall your programs.
Next time you install Nokia Maps (or any other app, especially if it's made by Nokia) make a backup of your phone first.
symbian programs & themes, nokia maps for any browser on any operating system of your choice, and other tricks to tame symbian: http://symbian.site666.info

Oracle 8i Configuration Tools Fails on Install

I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
Rafael

Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng

Nokia 6120 Classic Accept button not working

I have a Nokia 6120 Classic and is not working fine. I have decided to change my mobile.
Before change my mobile I want to backup all my data and telephone numbers. The problem is that Accept button is not working correct. When I start my mobile I can enter pin number but after this I can't enter the date because I have to use Accept button (the one in the top left). Is there any possibility to skip entering date? This is the only wey to enter mobile and backup my data
Thanks

I was going to take it to Nokia care but duh? Should the button stop working suddenly? Without anything wrong also the same with the camera button also I'm not the first one to have this problem right? Then its not our problem but its Nokia's I thought there's another solution, but yeah I'm making angry posts can you just make good products? I see all the people complaint about that button **bleep**, you better not talk while maybe the problem from th company.

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

6120 classic error - Connected phone was not recog...

I have used the software updater before, but now when I try and use it I am told Phone is not supported, connected phone was not recognized.
I have uninstalled and re-installed the program, PC suite works and recognizse my phone, I can back up etc.
Does anybody have any ideas how I can solve this problom

The updates for the 6120 classic have been removed due to a problem with either the software updater or the firmware.
They will be returned when the problem has been fixed.

Does 6120 classic support TV out from the AV 2.5-m...

Since there is a outlet called "AV connector" on the Nokia 6120 classic, is it possible to use the Nokia AV cable "CA-75U", an accessory of N95, to output video footages to TV ? I would Love to purchase the CA-75U if it has this function. Thanks for any advices.

Korngear, I beg to differ: the 6220 classic supports TV out and has a 2.5mm AV out, the cable comes with the box.
As for the 6120c however, there is NO TV out support, as Psychomania said, the hardware to output video is missing.

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

OCS 2007 R2 Response Group Configuration Tool Failure

Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FR

Hi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Memory/software issues with the Nokia 6120 classic...

Hi. I have a Nokia 6120 classic phone which I bought recently (not covered by warranty) and I'm having problems with the phone on my memory or software part (i don't know which one is exactly). I'm having issues like this for example when I'm to run Opera Mobile 10 on my phone after 2 or 3 sessions of browsing it starts telling me that it does not have enough memory and to close any other applications when non of them are really running at all (not even anti-virus). If I try to open it when for example an application like radio or music player is running it won't even bother to give me the loading logo or something, giving me the same memory error like it does in the previous described issue.
Another issue of this phone is when I open high quality 3gp videos in real player and I switch it to full-screen the video will freeze every 3-4 seconds, thing that doesn't happen when it's out of full screen.
Can somebody help me fix these issues? Thank you and good luck.

In Opera Browser settings --> Privacy-->clear history and Cookies...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

SQL Server Configuration Tools Disappeared

I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Nokia 6120 classic - Call log icons bug

Hi to all.
This is my first message in the forum.
One week ago I bought a Nokia 6120 classic with brand Vodafone (I'm from italy).
Everything works great except the icons in the call log, accessible with the green key (that's to say the answer key).
In fact, despite the phone numbers are correctly stored (and divided, for each contact, into mobile, home, etc.), the icons in the call lag is always the small blue icon related to a mobile phone niumber, even if the number does not correspond to a mobile phone number.
I have firmare version 4.21.
This is what appears with *#0000#
v 04.21
09-10-07
RM-243
Nokia 6129c EMS53.02
Through Nokia Software Updates I see there is a new firmare: v6.01.
Do you know if this firmware fix the call log icons bug?
As it is the unique bug I faced, I don't want to go on with a firmeware update if the new firmare do not solve it.
Unfortunately I can't find on the web a changelog for this firmware.
Many thanks.
Filippo
Message Edited by celandine on 21-Jan-2009 02:49 PM

well the change logs for firmware updates are not public knowledge, they do not get released so in reality you never know what you are getting. firmware update is always recommened as it brings in more stability to the phone, usually fixes bugs, improves speed, sometimes battery performance and other identified issues. the chances are that you will not be able to find a changelog for your phone. you may not be able to update your phone unless it has been approved by voda since your phone is branded it is up to them to release approved firmware versions for thier customers.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

MFE on 6120 classic - configuration tool / bulk co...

Similar Messages

Maybe you are looking for