Midi start/stop signals

does any body know if you can get garageband to send/recieve midi start/stop signals. i.e. I want to hit record on garageband and have it signal my drum machine, synth, sequencer or whatever to play

GB2 offers no MIDI Out.

Similar Messages

Logic Pro midi start/stop remote

I would like to start and stop (and even record) in logic with MIDI-commands from my keyboard (Roland RD-700GX).
The keyboard has several midi buttons which are progammable but the message which is sent, is not a controler or SysEx but the start/stop status bytes of the MIDI-protocol. Logic cannot recognise these messages. Is there any trick or what can I do to work around this problem.

voss.audio wrote:
(look at FAH and FCH!)
Well I downloaded the Midi Implementation manual and it says that these the S1 and S2 buttons send this messages for start/stop. They are labeled as "Real Time Midi messages" but I could not understand if they are MMC ones for this device. If it is standard MMC it must looks like:
*MMC messages*
An MMC message (that is sent to, or generated by, an MMC device) is:
*F0 7F deviceID 06 command F7*
The third byte is the Device ID.
The fifth byte is the command:
01 Stop
02 Play
03 Deferred Play
04 Fast Forward
05 Rewind
06 Record Strobe (Punch In)
07 Record Exit (Punch out)
08 Record Ready (Record Pause)
09 Pause
0A Eject
0B Chase
0F MMC Reset
40 Write
44 Locate/Go to
47 Shuttle
Where the Roland Device ID is 41 as far as I remember.
You can try the S1 & S2 start/play function but first enable "Listen to MMC Input" logic sync setting ( see the pic below ).
I downloaded the User Manual of the RD-700GX as well, so in page 103 I found "Transmitting the Control Change (USER CC)". can you try to assign for S1 & S2 buttons ? If yes then assign CC13 for S1 and CC14 for S2 ( values 0 for example ). After that try to learn the Logic Keycommands dialog for play stop using this buttons - see my first post picture.
!http://img707.imageshack.us/img707/9002/mmc.gif!
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]

Apple TV 2 all of a sudden has trouble streaming. I stream from my desktop computer's iTunes for movies, and tonight it started stopping randomly mid movie and saying it wasn't connected. Any ideas? Router? ATV dying?

Apple TV 2 all of a sudden has trouble streaming. I stream from my desktop computer's iTunes for movies, and tonight it started stopping randomly mid movie and saying it wasn't connected. Any ideas? Router? ATV dying?
It just says not connected, and as soon as it bails to menu, it connects again and will play for another minute before doing the same thing all over again.

Hello David,
Thank you for contributing to the Apple Support Communities.
It sounds like your Apple TV is having trouble streaming videos from iTunes on your computer. This symptom could have a variety of causes, and I'd suggest the following initial troubleshooting steps.
In addition to restarting your devices (Apple TV, computer, router), try the tips in this article, starting with "Check your home network:"
Apple TV (2nd and 3rd generation): Troubleshooting playback performance - Apple Support
All the best,
Jeremy

How to append data in same log after start and stop signal express

how can i append my data to the same log file after starting and stopping the signal express ? Is there some option to do this. After start/stop it always makes a new log file. How can append datat to the same log file.
Thanks in advance.
Munir

Hello mbhatti,
I founded a KB which seems do describe the way to solve your problem.
Appending Data to the Same File when Logging in LabVIEW SignalExpress :
http://digital.ni.com/public.nsf/allkb/C38AEE499D5CC8C6862572CF006875D2?OpenDocument
I hiope this will help you
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

Transmitting start/stop/play messages to external instruments

How do I get Logic to transmit start/stop/play messages to my external Roland groovebox?
I've tried ticking the "Transmit MMC" in the Synchronization settings but it doesn't seem to work.
Basically what I'm trying to achieve is when I hit play on the Logic transport, the pattern in the groovebox starts.
Cheers for the help

Im totally a newbie, but I had issues controlling my Boss DR-880 and had success enabling the Sychronization -> Midi -> Destination 1 checkbox. The dropdown is set to all.
It doesn't seem to matter whether Transmit MTC is checked or not.
Hope this helps.

Start/stop OAS 10g (9.0.4) instances remotely

Hi,
I want to find out if I can start/stop Mid-tier instance remotely.
For example, I have Mid-tier installed on RHEL 3.0 server and Infrastructure installed on AIX server.
I want to start/stop Midtier instance along with Infrastructure from AIX machine. Can any one suggest any script for this?
Thanks in advance!
GN

I don't know if its possible in a single script.
What I'll do is connect over ssh to the servers and run some of the scripts available to start/shutdown the instances.
In [1] there are some useful scripts. (the scripts need to be IN the server, not your client)
[1] - http://www.oracle-base.com/articles/10g/OracleAS10gAutomaticStartupShutdown.php

Which is the best structure for start/stop data logging?

Hi everybody,
hope I can explain my problem good enough that anyone can help me:
I have a VI which continuely shows on a graph the voltage of a Analog Input of a DAQ device. Now I want to allow the user to start/stop with a click on a button data logging. Means that a second loop writes to a selected path every ms the data to a spreadsheet file.
At the moment my VI works like this:
You run the VI and Labview asks you one time for the file path, then you can start and stop the data logging. But you can do it only one time. If you want to log a certain time later another file, you have to close and open the whole VI again which is not very professional...
My target is:
It is onlyl necessary to start the VI one time. Then you can select a new file path, log data, select another file path, logging data again....and so on...
Which programm structure is necessary, can anyone help me as a labview beginner with that issue? I attached the VI if someone just wants to edit that...
Thank you for your help!! Markus
Attachments:
Logging voltage.vi ‏93 KB
screenshot.JPG ‏98 KB

@NaruF1 and GerdW
you are right, there is a mistake, both loop rates should be the same (10 ms) :-)
@NaruF1
yes you understood correctly that the file dialog should appear every time the user wants to start writing a new log-file. The voltage we measure is a analog signal, so there will be several interesting periods we want to save for a later analysis in Excel.
To your 2nd point: if it works with a array it will be fine. But it must be possible to log data for lets say 5 minutes, so the array won´t be too large? (5 min @ 10 ms loop rate will be 30000 rows..
attached is the VI, saved as LV2009..
Thanx a lot!
@GerdW
..you ask why I didn´t create a structure like you recommended with notifiers or queues? The simple answer would be that I am not familiar with all this.. just began to write my first Labview programm. I will have al look to the LV help with all that stuff... Thank you a lot
Attachments:
Logging voltage.vi ‏80 KB

Batch / script file to start /stop sap server

Hi,
   I would like to start/stop SAP server using batch file (in windows). I need this, whenever we have to shutdown the server and restart of the server, so that SAP will automatically shutdown and restart using batch files while server restart cases? If anyone knows, please let me know. Thanks,
Regards,
Sundar.

target of the 700 sapstartsrv improvement was to deliver identical functionality on all SAP platforms. As the DCOM programing model is only available on Windows platforms sapstartsrv.exe was enhanced by the WEB-Service interface and is available now on Unix too.
The DCOM SAPControl interface of sapstartsrv.exe is still existing, but only on Windows. Here you can use VB Script or any other programming language able to handle DCOM objects to write your own programs / scripts to interact with the SAPControl.
sapcontrol.exe is a command line program available since 700 which enables you control over nearly all functions of the sapstart service.
Even it has the same name as the DCOM interface it' something completly different.
regards
Peter
PS: sapcontrol syntax
usage: sapcontrol [
                   -prot GSOAP_HTTP| http using gsoap build in sockets (default)
                         NI_HTTP|    http using SAP NI sockets (prefer Unix domain sockets)
                         NI_HTTPS|   https using SAP NI sockets (prefer Unix domain sockets)
                         WINHTTP|    http using Windows winhttp
                         WINHTTPS|   https using Windows winhttp
                         PIPE        Windows named pipes
                   [-user <user> <password>] OS user and password for Webservice authentication
                   [-repeat <N> <D>]         Repeat Webmethod call <N> times (-1=forever) with <D> sec delay
                    -format list|            List output format (default)
                            script           Script output format
                   [-host <hostname>]        Host to connect to (default: localhost)
                   -nr <instance nr.>        SAP Instance number to connect to
                   -function <Webmethod> [parameter list]
Webmethods: Start
            Stop [softtimeout sec]
            Shutdown
            RestartInstance [softtimeout sec]
            StopService
            StartService <SID>
            RestartService
            ParameterValue [<parameter>]
            GetStartProfile
            GetTraceFile
            GetAlertTree
            GetAlerts
            GetEnvironment
            GetVersionInfo
            GetQueueStatistic
            GetProcessList
            GetInstanceProperties
            ListDeveloperTraces
            ReadDeveloperTrace <filename> <filesize>
            ListLogFiles
            ReadLogFile <filename> [<filter> [<language> [<maxentries> [<cookie>]]]]
            AnalyseLogFiles [<severity 0-2>] [<maxentries>] [<starttime YYYY MM DD HH:MM:SS> <endtime YYYY MM DD HH:MM:S
S>]
            OSExecute <command> <async> <timeout> <protocolfile>
            SendSignal <pid> <signal>
            GetSystemInstanceList
            StartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [<waittimeout sec>]]
            StopSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
            RestartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
            AccessCheck <function>
            ABAPReadSyslog
            ABAPReadRawSyslog
            ABAPGetWPTable
            J2EEControlProcess <processname> <function>
            J2EEGetProcessList
            J2EEGetThreadList
            J2EEGetSessionList
            J2EEGetCacheStatistic
            J2EEGetApplicationAliasList
            J2EEGetVMGCHistory
            J2EEGetVMHeapInfo
            StartWait <timeout sec> <delay sec>
            StopWait <timeout sec> <delay sec>
            WaitforStarted <timeout sec> <delay sec>
            WaitforStopped <timeout sec> <delay sec>
Exitcode: 0: Last Webmethod call successfull
          1: Last Webmethod call failed, invalid parameter
          2: StartWait, StopWait, WaitforStarted, WaitforStopped timed out
          3: GetProcessList succeeded, all processes running correctly
          4: GetProcessList succeeded, all processes stopped
Security: Trusted connects without user and password check are possible through
          Unix domain socket or Windows named pipes. Protected webmethods like
          Start or Stop require a trusted connection or OS user and password
          authentication.

Foot Control to Start/Stop Recording??

Does anyone know if Garageband can be remotely controlled to start and stop recording? Isn't there some sort of midi foot control pedal that allows this? If anyone has any experience with this, I'd love to hear!

The iControl is a control surface that controls many things in GarageBand. However, I don't think it could be used for a remote control for punching in/out.
I agree. We need some kind of remote start/stop "peddle" type controller. I just ordered the PowerMate from Griffin. I don't need 50' of cabling, just about 5' or so. Should be perfect for me. I dunno about setting it on the floor and stomping on it though

How to trigger temperature acquisition (6024E) at the start of signal generation from NI5411?

I'd like to begin/end acquiring temperature data with the 6024E after the start/stop of the signal output from the 5411. What is the best way to accomplish this? is software or hardware triggering better?

Rudy,
Using a hardware trigger is definitely the more precise method. I would suggest that you consider using markers from the NI 5411 to trigger the NI 6024E. Information concerning this topic is available in the NI Signal Generators Help. Specifically, it is available in the following location:
Contents >> NI Signal Generators Help >> Devices >> NI 5411 >> Waveform Generation >> Marker Events
If you do not have the NI Signal Generators Help, it can be downloaded from the following location:
NI Signal Generators Help (NI 5401/5404/5411/5421/5431)
Once you have exported the appropriate makers, numerous examp
le programs exist that demonstrate how to trigger the NI 6024E. If you are using LabVIEW, I would suggest that you examine the Acquire N Scans Digital Trig.vi example.
Good luck with your application.
Spencer S.

DV Start/Stop issue with DVC Pro 50

Hey guys/ladies... I'm editing with Final Cut studio 2 (FCP 5) and i want to use the "DV Start/Stop Detect" feature. I'm capturing video with the DV50 NTSC 48KHz codec, however, when I try to use the DV Start/Stop Detect function, it gives me an error that reads "The clip you have selected does not reference a movie that can be analyzed". I've brought this video in via FireWire, and I see in the manual that it should work with DV, DVCPro, DVCPro 50, and DVCPro HD... The deck i'm using is the Panasonic AJ-SD93P (DVCPro 50), and the camera for aquisition is Panasonic AJ-SDX900P (DVCPro 50). What am I missing?
G5 Mac OS X (10.4.9) 2x 3GHz Dual-Core Intel Xeon

Ah! the operative word here is "may"... it's bad information I believe. The camera has to have a time of day code function recorded in the signal or it won't work... and only the consumer/prosumer level cameras have this feature. If you can't superimpose the time of day and date over the picture in the recording mode (like consumer cameras do) this isn't going to work.
FCP reads this code and when it detects a break in time (every time you pause would be when this happens) it can place the markers. But if the feature isn't on the camera, FCP can't read it. I've never read nor seen this work on anything but DV 25 recordings... and then only if the camera has the time of day capability.
Jerry

USB sends electric shock to sound card and speakers. "Boom" anytime it starts/stops/reboot

Since I installed Mountain Lion (july 2012) on my 2009 iMac, my usb ports send an electric shock to my external sound card anytime it starts/stops/reboot.
So my speakers make a sound like "boom" and I'm afraid they will be ruined..how do I control this shocks?
It NEVER happend with Snow Leopard and Lion. iOS always purchased on Mac App Store.

Thank you for the quick reply. Sadly it did not work . I can only choose between 44100 and 48000 hz but with both situations, the problem is still there.
It's most like an USB problem I think, it happens wherever I connect the cable (in any of the 4 ports). I think the Mac sends an electric signal (you can listen the speakers or see the leds in the sound card) to all ports while stopping/starting/waking/rebooting. Actually while starting it happens more than one time.
I would send a video, but I don't know why but my "Insert Video" button is unactive..

How do I select multiple albums in Revel to start/stop sharing?

How do I select multiple albums in Revel to start/stop sharing?

Hello,
You have to select each one to share the album. You can have multiple albums sharing at the same time. Please see our FAQ post "How to share photos with Revel"
http://forums.adobe.com/thread/1157995?tstart=0
For additional helpful information regarding Revel , please see our main FAQ Forum http://forums.adobe.com/community/ps.com_sharing_and_storage
Thanks
Scott

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Start/Stop music time in iTunes not syncing to iPod

Hi, I've managed to change the start/stop times in a few of my songs to skip some lengthy intros/outros in iTunes, but for some reason, these changes refuse to be synced onto my iPod Touch (second gen).
I'm not exactly sure what to do in this situation... any suggestions are greatly appreciated :]
Edit: No idea how this got into the iPod nano 4th gen subforum... I was in the iPod Touch subforum when posting this
Message was edited by: seanterisu

I just went through and tried both updating and authorizing my computer to play the music. I have the most recent version, and even after authorizing my computer nothing has changed.
If this helps, even on the iTunes screen, while the music files show up in the iTunes part of the library, the smart lists are empty of the same music files under the iPod listing.
Thanks for the help, perhaps you can provide more?

Midi start/stop signals

Similar Messages

Maybe you are looking for