Minimum capability for checkinView of type Org?

Hi,
Any one knows what is the minimum capability required to allow for checkin of view of type organization? I have a requirement to create organization via workflow and there I am creating a view of type organization and then checkin-in the view, but if I do it via a user who has 'Organization Administrator' Capability then it thows AuthorizationException, 'Configurator' on the other hand works fine.
I thought 'Organization Administrator' capability should have allowed for that.
Any thoughts anyone?
Thanks,
BB

By the way this question is because of the audit log, if I check in as 'configurator' then the audit logs have the subject as 'configurator' for the organization create event, while we want to log the actual user name/account id i.e. WF_CASE_OWNER.

Similar Messages

  • Fax/Email capability for the Message types

    Hi all,
    There a is a new message type ZSF created for Smartform for the PO transactions ME21N/22N/23N through NACE Tcode.
    The properties of this message is similar to that of the NEU message type for SAPScript with the changes to the Form name and the Print program name.
    But the ZSF does not perform the External send functionality which the message type NEU is able to.
    For NEU Processing Routines is has the customised form ZZMEDRUCK while for the ZSF this coulmn of Form is Blank and the Smartform Column is updated with the smartform name. Is this correct?
    What else is needed to enable the External send functionality for the ZSF.
    Appreciate your inputs.
    Thanks & Regards,
    Stock.

    Hi
    It seems all the settings are OK But what MEDIUM is used to send Mail
    For print we use Medium 1 for Fax 2 like that for MAIL it is 7 I think
    see the table NAST and the field NACHA for different medium values
    So you have to use the proper medium for sending the mail
    also you ensure that the Driver program is triggering properly for the different communication medium
    see the links for sending the smartform through mail
    check...
    How to send smart form via email
    /people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp
    Regards
    Anji

  • Condition type PMIN Minimum Price for material

    Hello
    We have a requirement where we need to maintain minimum price of material in master.
    Whenever in sales order price is entered and is lower than minium price for material maintained it should automatically add the difference as surcharge. If the price maintained is more than the minimum price maintained it should not do anything.
    I guess we have to use Ctype PMIN for this. I amy using this condition type have created a condition record and maintained a minimum price for this material f09 as rs 1000
    Now when i am creating sales order price picked up from pricing condition record for that customer is 500 . Now it should automatically add Rs 500 in condition line item for condition type PMIN.
    What is happening is it is showing me my base price as 500 and it is adding PMIN as 1000 to the base price and showing total base price as 1500
    If price maintained in pricing condition record is more than 1000 for ex 1200 even then too it is adding PMIN as 1000 and showing total base price as 2200.
    Please let me know what am i missing...
    Regards
    SANJEEV

    -T code VK11 - Maintain condition records - You can use the upper and lower limits functionality in the condition records for those specific materials.
    -Also Make this condition type as mandatory then check it out.
    Regards

  • HELP for all 5 TYPES of  STO  Stock Transport Orders with detailed scenario

    PLEASE help me understanding the detailed scenarios for all 5 TYPES of STO s
    as in my day to day job activities , i frequently handles issues related to STO s
    PLEASE HELP WITH DETAILED STEP BY STEP SCENARIOS

    Hi Jagatram,
    Standard SAP has the following methods For Stock transport order:
    1) One Step Transfer stock without using purchasing documents; Use movement type 301.
    2) Two Step Transfer stock without using purchasing documents; Use movement type 303 in Supplying plant and movement type 305 in receiving plant.
    3) Using Standard Transport Order (STO) without delivery in two steps. STO created in T-Code ME27, receiving plant posts goods issue (for returns), movement type 351 and supplying plant post goods receipt from using movement type 101.
    4) Using Standard Transport Order (STO) with delivery in one step. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 647 and goods receipt document with movement type 101 both created in one step.
    5) Using Standard Transport Order (STO) with delivery in two steps. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue posted (for materials to be returned) with movement type 641.Goods receipt is posted in the supplying plant, movement type 101.
    6) Using Transportation scheduling agreement (TSA) with delivery in two steps. TSA created in T-Code ME37. Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 641. Goods receipt is posted in the supplying plant, movement type 101.
    To achieve it, necessary configurations has to be done in Tcode- OMGN.
    SPRO>> Materials management>> Purchasing>> Purchase Order>> Set up Stock transport Order:
    1. Plant: For the receiving plant, maintain customer No-Plant (If using STO with delivery), for the Sales Org, Dist channel and Division.
    2. Checking Rule: Create checking rule.
    3. Define checking rule : Usually no change required here.
    4. Assign delivery type/checking rule: Assign the document type(UB) - Supplying plant- Delivery type(NL).
    5. Purchasing document type: Maintain the supplying plant- Receiving plant relationships for the doc type-UB, either 1-step or 2-step, as per business.
    Hope this helps!
    Regards,
    Shilpa

  • Function Module for getting the Sales Price for a condition type

    Hi,
    I am looking for a standard function module to which I can pass my condition type(new customizing) and it will return the sales price. The customer is going to create some new condition type to manitain the sales price. I'll have the necessary information like material/sales org/distribution channel, customer and need the standard function module to read the condition records for that condition type(as configured) and give me the price. PLease help if you know of a standard function module performing this.
    Thanks in advance.
    Regards
    Malthi

    Hi malthi ,
    welcome to sdn
    for material sales area u can look for the validations is table MVKE.
    the classification of the conditions is in tables like A901, a902 etc which in my opinion holds the condition types per classification .
    put a A* in se11 and this will give the list of tables per classification .
    u need to get the conditions as per kschl and dmbtr and
    etc..
    like this ..
    Get Condition Values for Material/Plant combination
      IF NOT i_a916[] IS INITIAL.
        SELECT knumh kappl kschl krech
               kbetr konwa kpein kmein
               INTO TABLE i_konp
               FROM konp
               FOR ALL ENTRIES IN i_a916
               WHERE knumh EQ i_a916-knumh AND
                     kappl EQ i_a916-kappl AND
                     kschl EQ i_a916-kschl AND
                     loevm_ko NE 'X'.
      ENDIF.
    Get Condition Values for Material/Plant/Ordertype/
    Customer combination
      IF NOT i_a925[] IS INITIAL.
        SELECT knumh kappl kschl  krech
               kbetr konwa kpein kmein
               APPENDING TABLE i_konp
               FROM konp
               FOR ALL ENTRIES IN i_a925
               WHERE knumh EQ i_a925-knumh AND
                     kappl EQ i_a925-kappl AND
                     kschl EQ i_a925-kschl AND
                     loevm_ko NE 'X'.
      ENDIF.
    just check this Fm if u can apply ur condition over here ..
    ME_GET_PRICE_CONDITION
    regards,
    VIjay.

  • Minimum implementation for SMTP-ESMTP clients

    Hi,
    if I want to develop a Mail client I can use SMTP/ESMTP. I read already some of the RFC-Specs, but I cannot find an advice for the minimum implementation for a client - just for servers.
    Is the minimum number of commands the same as for the servers (7 commands for SMTP and 9 commands for ESMTP) ?
    Thanks for any help.
    BR

    Simple config...
    rserver host EXCHANGE001
      ip address 10.2.3.101
      probe PING_EXCHANGE
      inservice
    rserver host EXCHANGE002
      ip address 10.2.3.102
      probe PING_EXCHANGE
    rserver host EXCHANGE003
      ip address 10.2.3.103
      probe PING_EXCHANGE
    rserver host EXCHANGE004
      ip address 10.2.3.104
      probe PING_EXCHANGE
    serverfarm host EXCHANGE
      description EXCHANGE SERVERS
      predictor hash address
      probe PR-EXCHANGE-HTTPS
      rserver EXCHANGE001
        inservice
      rserver EXCHANGE002
      rserver EXCHANGE003
      rserver EXCHANGE004
    class-map match-all EXCHANGE-VIP
      10 match virtual-address 10.2.3.100 tcp any
    sticky ip-netmask 255.255.255.255 address both EXCHANGE-STICKY
      timeout 20
      replicate sticky
      serverfarm EXCHANGE
    policy-map type loadbalance first-match EXCHANGE-VIP
      class class-default
        sticky-serverfarm EXCHANGE-STICKY
    policy-map multi-match EXCHANGE_POL
      class EXCHANGE-VIP
        loadbalance vip inservice
        loadbalance policy EXCHANGE-VIP
        loadbalance vip icmp-reply
    NB: Only rsever EXCHANGE001 is active in the serverfarm.

  • Changes in the PRICING STRUCTURE FOR THE DOCUMENT TYPE

    Hello Gurus,
    What is pricing structure?
    and what is meant by changes in pricing structure for the document type.
    Could anyone let me know about pricing structure and changes in Pricing structure for document type.
    prashant

    Hi Prashnat,
    In SAP Pricing works on Condition Techniqe.
    Condition Technic consits to following things.
    1.Condition Tabels ( Assigned to Access Sequence )
    2.Access Sequence ( Assigned to Condition Types)
    3.Condition Types ( Assigned to Pricing Procedure)
    4.Pricing Procedure
    5.In Pricing Procedure Determination will be assigning as fallows:
    Sales Org + Dist Channel + Division + Document Pricing Procedure + Customer Pricing Procedure + Pricing Procedure.
    Based on this the Pricing will be takes place in the system.
    Hope this Clarifies your Doubts and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • [SOLVED] Value too large for defined data type in Geany over Samba

    Some months ago Geany started to output an error whith every attempt to open a file mounted in smbfs/cifs.
    The error was:
    Value too large for defined data type
    Now the error is solved thanks to a french user, Pierre, on Ubuntu's Launchpad:
    https://bugs.launchpad.net/ubuntu/+bug/ … comments/5
    The solution is to add this options to your smbfs/cifs mount options (in /etc/fstab for example):
    ,nounix,noserverino
    It works on Arch Linux up-to-date (2009-12-02)
    I've writed it on the ArchWiki too: http://wiki.archlinux.org/index.php/Sam … leshooting

    An update on the original bug. This is the direct link to launchpad bug 455122:
    https://bugs.launchpad.net/ubuntu/+sour … bug/455122

  • Default Purchasing organisation for Purcashing Document type

    Dear Gurus,
    I need to make default Purchasing organisation for Purcashing Document type. How to configue this. Please advice me.
    Thanks
    RS

    Hi,
    You can do it with Personal Setting option which is available in purchase order header level.
    Click on this button, Go in Defaults Values.
    Enter material type, purchasing org. and other required detail.
    Then always at the time of purchase order creation you got same material type and purchasing org.
    Note: You can do it for only one material type and purchasing org.
    Regards,
    Mahesh Wagh

  • After updating to lion installed graphics card does not meet minimum requirements for aperture

    Hello,
    I updated to OSX lion yesterday. and Apterture is given me this error message.  "The installed graphics card does not meet the minimum requirements for Aperture.   I tried the Option Command Open app thing to try rebuild the database.  But nothing happens when I try opeing the app using those combo key's  So I removed the app using mackeeper and tried reinstalling it. still same issue.
    I have following machine
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B0E
      SMC Version (system):          1.69f1
      Serial Number (system):          C02F94ETDMGG
      Hardware UUID:          132AE53D-0766-5E17-9F54-ED935D6F7AB3
      Sudden Motion Sensor:
      State:          Enabled
      Chipset Model:          AMD Radeon HD 6750M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x8
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x6741
      Revision ID:          0x0000
      ROM Revision:          113-C0170L-521
      gMux Version:          1.9.23
      EFI Driver Version:          01.00.521
      Displays:
    Color LCD:
      Resolution:          1680 x 1050
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    VX2245wm:
      Resolution:          1680 x 1050 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          QD0064002266
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Adapter Type:          Apple Mini DisplayPort To VGA Adapter
      Adapter Firmware Version:          1.03
    Display Connector:
      Status:          No Display Connected

    HAve you tried disconnecting the external monitor rebooting and then runnig Aperture?

  • Need help for new message type for PO archiving

    Hello All
      I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
    Steps for new Message Type for PO Archiving
    1.     Defined new Table 513 Purch.Org./Plant.
    2.     Defined new access sequence Z513 Access Sequence for Archiving.
    Following are parameters to the Access Sequence
    Access Sequence Number = 21
    Table = 513
    Description = Purch.Org./Plant
    Requirement = 101
    Exclusive = Yes (box checked)
    3.     Maintain Output Type ZARR for PO
    General Data
    Access Sequence = Z513
    Access to condition (Checked)
    Multiple Issuing (Checked)
    Program = FM06AEND
    FORM Routine = CHANGE_FLAG
    Default Values
    Dispatch Time = Send Immediately (when saving application)
    Transmission Medium = Print Out
    Storage System
    Storage Mode = Archive Only
    Document Type = ARCHIVE
    Mail Title and texts
    Language = EN
    Title = Archiving for Legal Requirement
    Processing Routines
    Transmission Medium = 1 (Print Out)
    Program = SAPFM06P
    Form Routine = ENTRY_NEU
    Form = ZJ_9H_MEDRUCK
    Partner Roles
    Medium = Print Out
    Funct = VN
    Name = Vendor
    4.     Fine-Tuned Control: Purchase Order
    Oprat. = 1
    CType = ZARR
    Name = Testing for Archivin
    Short Text = New
    Update Print Related Data = Yes (checked)
    Oprat. = 2
    CType = ZARR
    Name = Testing for Archivin
    Short Text = Change
    Update Print Related Data = Yes (checked)
    5.     Maintain Message Determination Schema: Purchase Order
    Procedure RMBEF1
    Step = 100
    Cntr = 1
    CTyp = ZARR
    Description = Testing for Archivin
    Requirement = 101
    6.     Assign Schema to Purchase Order
    Procedure RMBEF1
    7.     Define Partner Roles for Purchase Order
    Out. = ZARR
    Med = 1 (Printout)
    Funct = VN
    Name = Testing for Archivin
    Name = Vendor
    8.     Test Condition Maintained in MN04 (Master Data)
    Purch. Org. = 0001
    Plant = 24
    Partner Funct = VN
    Medium = 1 (Printout)
    Date/Time = 4 Send immediately (when saving application)
    Output Device = HUL1
    Storage Mode = Archiving only
    Thanks
    Ankit

    the problem is the Exclusive = Yes  indicator in the access sequence.
    Your other message has this exclusive indicator as well.
    so if the first  message is found, then no other message wil be determined
    to allow several messages in one PO, you must not set this exlusive indicator

  • URGENT HELP! - The prefix "xsi" for attribute "xsi:type" is not bound

    Hi! i createD a WebService using the JWSDP 1.2. In the server-side i read a xml file, create another empty Document and using the importNode() method i populate the empty created doc. The problem is when i try to send client this created document. I'm using the DOMSource to send it to client side. Both client and WS method code are below! Does anyone know the answer??
    And I'm getting this error:
    [java] Endpoint address = http://localhost:8080/cm/ContextManager
    [java] [Fatal Error] :2:42: The prefix "xsi" for attribute "xsi:type" is not bound.
    [java] javax.xml.transform.TransformerException: org.xml.sax.SAXParseException: The prefix "xsi" for attribute "xsi:type" is not bound.
    [java] at org.apache.xalan.transformer.TransformerIdentityImpl.transform(TransformerIdentityImpl.java:469)
    [java] at contextclient.CMClient.main(Unknown Source)
    [java] Caused by: org.xml.sax.SAXParseException: The prefix "xsi" for attribute "xsi:type" is not bound.
    [java] at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1139)
    [java] at org.apache.xalan.transformer.TransformerIdentityImpl.transform(TransformerIdentityImpl.java:452)
    [java] ... 1 more
    [java] ---------
    [java] org.xml.sax.SAXParseException: The prefix "xsi" for attribute "xsi:type" is not bound.
    [java] at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1139)
    [java] at org.apache.xalan.transformer.TransformerIdentityImpl.transform(TransformerIdentityImpl.java:452)
    [java] at contextclient.CMClient.main(Unknown Source)
    ====================CLIENT CODE================================
    Source getdevice = manager.getDevice("How");
    DOMResult domResult = new DOMResult();
    // getting a transformation factory instance
    TransformerFactory transformerFactory = TransformerFactory.newInstance();
    Transformer transformer = transformerFactory.newTransformer();
    transformer.transform(getdevice, domResult);
    Node node = domResult.getNode();
    DOMSource domSRC = new DOMSource(node);               
    StreamResult streamResult = new StreamResult(System.out);
    transformer.transform(domSRC, streamResult);
    ===============================================================
    ===================WebService Method CODE======================
         public Source getDevice(String primaryContext)
              Source src = null;
              try
                   String uri = "C:\\foo\\DeviceInstance.xml";
                   DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                   DocumentBuilder builder = factory.newDocumentBuilder();
                   //create the first Document
                   Document doc1 = builder.parse(uri);
                   //create the second Document
                   Document doc2 = builder.newDocument();
                   //create the second doc's root element and append it
                   Element rootDoc2 = (Element)doc2.createElement("device");
                   doc2.appendChild(rootDoc2);               
                   //get root of first document
                   Element rootDoc1 = doc1.getDocumentElement();
                   NodeList list = rootDoc1.getElementsByTagName(primaryContext);
                   for(int i = 0; i < list.getLength(); i++)
                        Element nodeToMove = (Element) list.item(i);
                        Node newNode = doc2.importNode(nodeToMove, true);
                        rootDoc2.appendChild(newNode);
                   src = new DOMSource(doc2);          
              catch(DOMException dome)
                   dome.printStackTrace();
              catch(Exception e)
                   e.printStackTrace();
              return src;
    ===============================================================
    Does anyone know what could it be? Please, it's very urgent!
    Tks in Advance,
    Rodrigo.

    The xml i'm trying to send is below. It's important explain that in a standalone app it works perfectly. Unfortunately, when i perform the same actions in the WS world, it doesn't work. See, i tried to put the attributes inside the root element with the setAttributeNS() method but i got the same error again. How could i bound the attribute with no errors like that said before???
    <?xml version="1.0" encoding="UTF-8"?>
    <device xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="context.xsd">
    <Identity xsi:type="fooType">
                   <Name>
                        <GivenName>Rodrigo</GivenName>
                        <FamilyName>Felicio</FamilyName>
                   </Name>
              </Identity>
    <Identity xsi:type="foowType">
                   <DeviceID>dev00345</DeviceID>
              </Identity>
    </device>
    Regards,
    Rodrigo.

  • Eclipse- "No Tab group defined for launch application type/n

    I was developing nicely on Web Sphere Studio Developer Version=5.1.0 (with eclipse Release 2.1.1) but I just started getting the error "No Tab group defined for launch application type/n org.eclipse.jdt.launching.localJavaApplication" when trying to run or debug. I was trying to parse&validate an XML file and getting a log of the Parsing errors.This might have done something. However, it was working before..Any ideas before deleting and reloading Eclipse?
    Cigdem Savaseri-Brackmann

    Hi Jin,
    I'm having the same problem ... how you solved?
    Thanks!

  • Dwb libsoup-WARNING No feature manager for feature of type

    Hi, after upgrading to  glibc-2.18-5 I get this warning.
    dwb libsoup-WARNING No feature manager for feature of type 'SoupAuthNTLM'
    And dwb will not autostart anymore.
    Same on a build with archiso, file a bug?...

    Trilby wrote:Is this a [testing] issue, or are my mirrors behind?  I just now got glibc-2.18-4.
    You can always check online https://www.archlinux.org/packages/?name=glibc

  • Document type declaration for root element type "web-app" must end with ' '

    I am attempting to deploy an application (.war file) using the Sun Access Manager Agent installed, (Reference http://docs.sun.com/app/docs/doc/819-3201/6n5eht3k4?a=view -near the bottom) and I get this error:
    Error loading deployment descriptors for ajacs Line 3 Column 19 -- The document type declaration for root element type "web-app" must end with '>'.
    Here is the relavent code:
    <!DOCTYPE web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
    <web-app>
    <filter>
    <filter-name>Agent</filter-name>
    <filter-class> com.sun.identity.agents.filter.AmAgentFilter </filter-class>
    </filter>
    <filter-mapping>
    <filter-name>Agent</filter-name>
    <url-pattern>/*</url-pattern>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>INCLUDE</dispatcher>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>ERROR</dispatcher>
    </filter-mapping>
    <display-name>AJACS</display-name>
    <welcome-file-list>
    <welcome-file>frameSet.jsp</welcome-file>
    </welcome-file-list>
    etc...
    Now, when I remove the parts that http://docs.sun.com/app/docs/doc/819-3201/6n5eht3k4?a=view said to add, it deploys just like it used to deploy- just fine with no errors. However, I add that code and it breaks.
    Note: The code was a straight copy/paste, so if there is any error in the code, it is because it's written incorrectly on the Sun doc website.
    Any help would be MUCH appreciated. Thanks!

    Well, if that was pasted on one line, it would be:
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    So it's supposed to be that way. I just tried it with the extra quotes, and no dice...

Maybe you are looking for