Missing incorrect batch input session

One of our user removed from SM35 all the incorrect batch-input session and not only the own.
We have the log of the session but not the transaction to reprocess.
Do you know if is possible to retrive the data without the restore of the system?
Regards
Giuseppe

HI,
This is not possible to retrive the session which were deleted. You need to run the program again which has created the sessions.

Similar Messages

How Can we delete automatically Incorrect Batch Input Sessions

Dear Experts
As per Note 16083 the Schedule of below program only deletes
successfully created Jobs
SAP_REORG_BATCHINPUT | RSBDCREO | yes | daily
How to delete Incorrect BATCH INPUT SESSIONS AUTHOMATICALLY
Rgds

Hi,
You could use the following code sample on SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4794fc01-0901-0010-0fbf-beadbebbec54
Regards,
Gary

How to see the Batch input session name in SM35 with User name.

Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.

Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike

Stopping a batch Input session

Hi,
I need to stop a job which is being processed. Please tel me how do i acheive this.
I've tried SM37 & went for release but it says 'cannot be done because of the stattus it has'
I've also tried to stop the batch using the push button in Appl tool bar in SM37 but still i have the same message.

Hi..,
In the BDC_OKCODE,
give /n to stop that particular transaction...
give /bend to quit the entire Session....
You can interrupt the interactive execution of a session by entering the /bend OK code on any screen. /bend terminates the transaction currently being executed in the session and marks the transaction with the status Incorrect. The session is kept in the queue and is displayed in the Errors section of the list. Changes made by the interrupted transaction are rolled back as long as the transaction uses only the R/3 update facility. Direct database changes made by the transaction are not rolled back.
You can use /bend when testing sessions. For example, you may wish to run the first transactions of a large session in display-all mode to make sure that the session has been generated correctly.
You can restart processing of a transaction by entering the /bbeg OK code on any screen. /bbeg terminates the transaction that is currently being processed and then restarts the transaction fresh, as it is recorded in the batch input session. Any changes made by the transaction are rolled back, as long as they were made only by way of the R/3 update facility. Changes made directly to the database are not rolled back.
You can delete a transaction from a session during interactive execution by entering the /bdel OK code. The transaction is removed from the session. The deleted transaction cannot be run even if you restart the session, and you cannot take back the deletion.
regards,
sai ramesh
Message was edited by:
Sai ramesh

LSMW Issue at step -Run Batch Input Session

Dear gurus,
While uploading service master through lSMW while processing the system prompts a message specifying "Buffertable not upto date" at Run Batch Input Session step .So please investigate what is missing/wrong.
Wirth regards,
Raj

I dont think that this has directly something to do with LSMW.
It is more related to the transaction your try to post in the batch input.
Search OSS with the error message number. I had seen some notes for number SE001, but your message is actually twice in the message table, and you did not tell the message number.
If it is message SE001, then you may find programm corrections in OSS.
Otherwise just log out and in again and try, or open a message at OSS yourself if the problem still persists

LSMW- Batch Input session getting error

Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
Savitha

Hi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk

Update error after all screens in Batch Input session is processed.

Hi,
I have a problem in processing the batch input session. The batch input session is calling F-02 to post less than 999 line items (around 700) to a single financial document. The batch session is expected to have an error because tax code is missing for some line items but even after the tax code is added manually onto the batch screen, the update error message still happened at the end of the process. In the log, it said "System error: Error when inserting table BSET". Same account has been used to post 10+ line items manually with F-02, no error occurred.
Does anyone have any idea what possible reason could cause the update error in updating the tax table?

Hi Rob,
That is exactly what happened to us. We already had note 521481 in our system but we also have OSS 558288 in which causes our scenario not generating an error message but an update termination instead.
The other thing I found out is once tax code is entering in one of the line items, it will be copied to all the succeeding line items even for the accounts that does not require a tax code (i.e. posting without tax code allowed checked) which will significantly increase the amounts of data posted into BSET.
We fixed the issue by changing the BDC program so it will take out the auto-copied tax code from other line items. Issue is solved. Thank you. I also rewarded the points.
Minami

Batch Input Session for RFUMSV50 is not getting processed.

Dear All,
When i am trying to transfer the Service Tax Inetrim account to Service tax final account with the help of the program RFUMSV50 the batch input session is getting generated without any error. But when i process the same in SM35 it is not getitng processed.
Please advice on this.
Regards,
Rajeswari Shankar.

Hello Rajeswari,
Yes, this is normal.
When batch input sessions is generated with any error, this does not mean that you can execute it after via SM35 without any error
Moreover, you have the option in SM35 to execute it and with option "display error only", so this means that it can happen that there is no error
For example, the profit center is mandatory, and it is missing in the document. In that case the system will display error and ask you to fulfill the profit center
Please tell me, which error you have (message number)
Thanks
Tarek

LSMW Create Batch Input Session question

Hi all
when I use LSMW to upload data. every step is OK, but at the NO. 13 step ' 13 Create Batch Input Session', it always set the 'Display Trnacts per BI Folder' field a default value '1' .I must clear the defautl value and let the field to black so I can create ONE session.
why it always set a default value '1' in the 'Display Trnacts per BI Folder' field ??
anybody can help me?
thanks a lot!!

Hi,
=> Looks like you havent mentioned the TCODE that you are using whilst recording. There is a field specific to TCODE in the step 'Maintain Field Mapping and Conversion Rules'. Double Click on the field, a dialog opens, give your TCODE in capitals.
=> Check if you have mapped all the fields that you want to upload using LSMW. You could have missed mapping few target fields with their source fields.
=> Remove any unnecessary structure relations in step 4 - 'Maintain Structure Relations'.

Problem in running batch input session

Hello Guys i developed a lsmw object .in step 13 after executing create batch inputsession a session is created and i can see the session created but when i go to step 14 run batch input session .i couldnt find session there and eventually can not run session can any body help me please .

Hi priya,
in 13step session is created for test data.
if session is created the message will be display like this " 1 batech input n number of record are created".
if like message will display 14th step automatically run the session ifnot there is problem with in u flat file or miss match with some fileds.
check it corrected than run the u lsmw project.
i think now it will work.
Reward is usefull.
Thank's.
Patil

Revaluation error"posting are in batch input session"

HI All,
we are using 6.0 version and user has executed revaluation for FEB month,they were practised to use the online postings, but when they excute the revaluation there was an error message for 3 accts " valauation kept in batch input session "and accounts determination is missing for these accounts" and when we check the batch input session using SM35 there is no session with error. How to work on this ?
Is there any particular transaction where we can check the batch input session and execute once the accounts are assigned ?
Plz advice us, and is necessary for closing the month end activity.
best Regards
Stephen

Execute the session either online or in display error mode. This will give you the exact point of error and also you will be able to get detailed error message.
Regards
Rakesh Pawaskar

RFUMSV50- Error during batch input session

Hello Experts,
I am getting an error after creation of batch input session for program RFUMSV50.
If I run the session in foreground it gives velow error
program successfully worked 3 months back without any error but after that I am facing this type of issues.
Can anyone please guide what exactly missing in the configuration.
Regards,
ps

Hi Salvatore,
I'm in the same situation. I execute a BI, but it stops after a waring appears.
If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
Did you solved your Problem or did you have an hint for me.
Kind regards
Yvonne Adler

Sales Requisition - Log after batch input session

Hi gurus,
I have a batch input sessions (recording) that allows me to close/terminate sales requisitions.
example:
clear g_session.
concatenate 'FECHA_OT' sy-uzeit(4) into g_session.
perform open_session using g_session.
loop at t_vbeln into wa_vbeln.
    perform bdc_dynpro      using 'SAPMV45A' '0102'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-VBELN'
                                   wa_vbeln-vbeln.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  'BABS'.
    perform bdc_dynpro      using 'SAPMV45A' '0250'.
    perform bdc_field       using 'BDC_OKCODE'
                                  'SUEB'.
    perform bdc_field       using 'RV45A-S_ABGRU'
                                   c_augru.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  'SICH'.
    perform insert_session using 'VA02'.
    clear bdcdata. refresh bdcdata.
endloop.
perform close_session.
if sy-subrc = 0.
    perform submit_session using g_session ' '.
endif.
Is it possible to write all the sales requisitions after this recording, for example the input data is this working area "wa_vbeln-vbeln.",
but in the end the log is:
BDC_OPEN_GROUP                 returncode:      0
BDC_INSERT VA02 returncode:     0 RECORD:          0
BDC_INSERT VA02 returncode:     0 RECORD:          0
BDC_INSERT VA02 returncode:     0 RECORD:          0
BDC_INSERT VA02 returncode:     0 RECORD:          0
BDC_INSERT VA02 returncode:     0 RECORD:          0
BDC_INSERT VA02 returncode:     0 RECORD:          0
Is it possible to show all the sales requisitions that are terminated?
Thanks in advance,
Mário.

1. Go to OBY6 and open company code 3000.
2. Copy the Chart of Account assigned to company 3000
3. Go to OBD4 and check all the account groups for copied COA
4. Now compare all the account groups for COA EKCA
5 Create the missing account groups for EKCA.
Unfortunately i did the same steps and now i am stuck with several errors that i need to keep pressing Enter until all are done.
                So my question this time : " How can i get myself out of this instead click Enter for another 200 times. "

Problem while executing Batch Input session

HI All,
I am creating batch input session for transaction FB01.After creating the sesson when I am trying to execute it, its giving me the pop up "Session XYZ is being processed by user" and doesnt allow to excute it.
Pease suggest me the solution on this.
I have tried using "COMMIT WORK" , " COMMIT WORK AND WAIT", but it is not working.
Regards
Saurabh

HI Saurabh
I guess you are trying to process a session which already being processed. You can check the session that are currently in processing state via tab "In Processing". We an process the sessions that are in "New" or "Incorrect" State.
Kind Regards
Eswar

Batch input session is not generating In BRS

Hello,
I am uploading bank statement through ZFF67 program manual bank statement, after entering all the line items in the file, batch input session is not generating in SM35.
Please give advice.
Thanks,
Ratnam

Hi,
Go to environment - specification- here you need to maintain settings for batch input processing in T.code FF67.
I am not exactly remembering the menu option name. The sub option name is Specification, these settings you need to change with your user id.
Check and revert back still the same problem exists.
Regards,
Sankar

Missing incorrect batch input session

Similar Messages

Maybe you are looking for