Missing parts and production storage location

Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is NOT pulling in all inventory in all storage locations; I honestly think that is how it should work but would like to see what others think or have run into. Thank you very much!

Hi Judith,
This can be done by system to carried out Avilability check plant level instead of storage location level. For that plz do the settings as suggested by our member.
Check the "No.Stor.Loc.Insp" in OPJJ for checking group and Checking rule combination and assign the same checking group to material at MRP view.
Donot Assign storage location for components in material Master and BOM item.
Please try anf comeback
regards
pradeep

Similar Messages

Material staging in production with IM and WM storage locations

Hello,
I have the following situation at hand in a Client.
They use Process Orders and want to do material staging of the components.
The Production Supply área is an IM managed storage location but the storage location of the components is WM managed.
The staging should take place as pick parts (control cycle) transfering the components from the WM storage location to the IM production Storage location.
Im not sure we need to use Deliveries instead of Transfer Requirements.
Is this escenario posible and if so, how to configure it.
Thanks for any reply.
Aart

Aart,
For Transfer requirement creation for production order components WM staging please follow below steps.
1.Activate PP interface in Warehouse number control for PP interface in Logistic execution.
2.You need to assign WM replenishment movement type 319 against the production supply storage type.
3.In production scheduling profile all necessary WM TR/TO configuration to be done based on your requirement.
4.Create PSA in PK05.
5.Create Control cycle in LPK1.
6.Assign the PSA to production work centers.
With above settings once production order is released TR gets created which could be converted to TO manually or automatically for further process.
Br
KK

To stock transfer the RM to Production storage Location

Dear All,
I want to stock transfer the RM from Store to production storage location after that I have to pick the material against Production Order from Production Storage Location.
How I can carry out this scenario.
I am trying through Pull list.
please give ur valuable inputs.
Thanks in advance
Vijay Mankar.

Hi Vijay,
To tranfer the stock from store to Prod storage location , u can do in two ways,
1.Pull list - By accesing the Pullist with the production order .if there is no enough stock to meet production qty at production storage location , system calculate the missing part and asks replenishment storage location. here u have to give your store as repl.storage location
2. Enter tranfer posting.( MB1B) - using this u can tranfer the stock dierctly from the store to prodution storage location. u have to use 311 Mvt type and define Rec storage location is store.
3. Enter good issue MB1A - u can pick the raw material with reference to your prodution order using 261 Movement Type.
please reward if it helps
regards
pradeep

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

How to get receiving and sending storage location in material document?

Hi, guys,
I am now writing a report about material document. I need to get receiving storage location and sending storage location from material document in MSEG table , Is there any function module for this ?
Thanks.
Justin

I don't know, but there is a SELECT statement that lets you read any desired column from the database.
Thomas

Missing Parts in production Order no committed date and qty

Hello Guru,
May I ask your help to check our issue when we create a Production order, we got an error Order has missing parts. When check the Availability Check view, most of the components do not have committed date and qty even there are available stocks on them.
Can you help check what went wrong and its possible solution already check OPJK and OPJJ seems we have correct set up for this.?
I tried to check in CO09 on one component. from there there is also 0 committed qty and date. While the other component has OrdRes with 0 committed qty and date and there are some with values. Please help thanks.

Hi Ramagari,
OPJK
Plant AAAA
Ord Type: YYY1
Avalability Check: 2 (Check availability during order release)
Material Availability Part
Check mat. availability when saving order (tick)
Checking Rule : YP (PP checking rule - Production Order rel.)
Component Check Type : ATP Check
Release Material: 1 (User decides on release if parts are missing)
PRT Part
Checking Rule : 02 (Status check and inventory audit)
PRT Release : 1 (User decides to release when there's no PRT)
Capacity Part
No check (tick)
OPJJ
Availability Check: 02 (Individ. Reqs)
Checking Rule: 01 (Checking rule 01)
Stocks parts:
Include safety stocks (tick)
Missing parts processing part:
Checking period: GR : 0
In/outward movements part:
Incl. Pur Ord : X
inlc. pur Req (tick)
incl. dep req (tick)
Incl. reserv (tick)
incl. sales req (tick)
incl deliver (tick)
incl. ship notif (tick)
incl rel ord reqs : X
incl pld ord : X
incl prd ord : X

Difference between Production Supply Area and a Storage Location

Hello Experts,
Basic question but wanted to get more clarity on the concept as i never worked on the PSA
Can someone tell me the exact difference between PSA and a SL. I understand PSA is a Kanban, WM and SL is an IM concept. Can a work center have a storage location assigned or just a PSA? Can a GI be done from PSA or just from a storage location.

Hello
The production supply area is a master data used by WM, while the storage location is used by MM-IM.
Check this link for details:
Production Supply Area - Warehouse Management System (WMS) - SAP Library
The goods issue is done with reference to the storage location
It is possible to assigne a storage location to a production supply area and assign the production supply area to the work center.
BR
Caetano

How to manage spare parts and production parts seperately

Hello,
I want to keep some spare parts for services only ,though some of them also used in production .
then how can I implement this in SAP system,how the stock of spare parts not influence the forecast of the production( means these parts only can be used in services)
how to separate these parts in Warehouse in system and physically.
Thanks,
Helai

Helai,
If it were MY company, I would
1. Put the spares into a diff storage locn
2. Enter Safety stock for the quantity I want kept in 'spares' inventory
3. Use an availability check in which Safety stock is not relevant for ATP for these parts.
However, this does not meet all of YOUR stated business requirements. For this, you have to use MRP areas, and have the 'spares' storage location assigned to a different MRP area. You can then plan them completely separately from your production parts.
[MRP Area|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/c4/106956ae8a11d1a6720000e83235d4/frameset.htm]
Regards,
DB49

IMovie cannot share and no storage location set

I am using iMovie 10.0.6 on a Retina iMac running Yosemite.
iMovie suddenly developed the following maddening behavior, which I have yet to resolve despite trying many of the usual tricks:
Attempting to import to an event using my isight camera or my Canon HV20 camera in a library on my internal SSD results in the following popup message: "No storage location set: Cannot start ingest because there is not storage location set. Please set one under Storage in Preferences and try again."
It is possible to import by loading a file to my local library. However creating a project with that file results in the strange behavior that the clips from that file remain blue and don't fill in with the preview.
I cannot share or export any project. Clicking "Share" in file or the "Share" button displays the options, by when I click on the share option, nothing happens.
Importing to library in an external hard drive succeeds without the error message. The clips in the projects created in the external libarary do fill in with the preview pictures. However, I am not able to share or export a project in the external library either.
When I log into my son's account on the same machine, iMovie works fine. I am able to import to his accounts library and I'm able to share, the share button works as normal.
I have tried the following remedies, none have worked:
1)delete the iMovie app and reinstall.
2)delete every iMovie preference in ~/Library/preferences
3)delete iMovie caches
4)delete iMovie receipts
5)repair permissions using disk utility
6)reset user permissions and ACLs using "reset user password" in terminal
7)reinstall Yosemite from recovery (preserving user files)
8) reset pram and SMC
There must be some very hidden persistent setting corrupted that is either verry hidden or not explicitly part of iMovie; perhaps a common sharing or video import application? Does anyone have any ideas?

Brilliant - it worked for me, although I had to look around inside the
/var/folders/
and found it under another with two letter
Thank you ultrahertz

Autmatic upadate of status of missing parts in production order

Dear Gurus,
In production order to check missing parts status we have to click on push button for check for material availability. Is there any way available to update the latest material position in production order automatically?
Regards,
SAP CONS

Dear ,
This can be set at Order Control in OPJK .
You can goto OPJK-Select order type , plant and indicator 1(Availablity Check ) -Here Do not mark No Check check box and Mark material availablity check while saving .Keep the Collective Conversion indicator as 1-User decides based on if material is missing parts .
Regards
JH

Scope of Check Variation in Missing Part list Production Order

Hi,
I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
Why this difference is coming,can any body tell the possible causes.
Cheers,
Kumar.S

>
KUMAR.S. wrote:
> Hi,
>
> I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
>
> Why this difference is coming,can any body tell the possible causes.
>
> Cheers,
> Kumar.S
Kumar,
Its simple for creation and release of Production order different checking rule is used(This must be intentional). You check this in OPJK transaction, check for your order type / Plant combination for Business function 1(Create) the checking rule assigned would be ZP, whereas for the same order type / Plant combination for Business function 2(Release) the checking rule would be PP.
If you want the same, you can change it here. But I assume there must have been a purpose for this custom checking rule creation. You can find the scope of check difference between these 2 combinations in transaction OPJJ.
Regards,
Prasobh

Elitepad 900 tablet shows missing serial and product info when booting

Hi,
i recently updated my tablet from windows 8 to windows 8.1 and then updated bios. after this upgrade on boot screen it shows missing aerial number and product info. please note that i have not changed the board or any other hardware. please help me to resolve this.
regards
Raees

Hello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.

Production storage location

Hi experts.
How to assign Prod.Storage location as mandatory( MRP2 view) in MM1 and MM02.
I checked in OMS9,field selction group as 77 which contains 3 field names.MARC-KZECH, MARC-LGPRO,MARC-VSPVB. in which i want to make MARC-LGPRO alone as Reqiure entry.
Thanks in advance,
S.R

Hi,
In OMSr , Enter the storage location in New field group and made it as required field in the field selection group.
Regards,
Andra

I have suddenly got missing photos and cannot find locations

i have suddenly got 64 missing photos which i cannot locate also where is the get photo button

Missing photos in Lightroom can be reconnected via http://forums.adobe.com/message/6296339
I have never heard of a "get photo button"

Help with Multiple libraries and one storage location for files

I cannot get an answer to this question anywhere and was really hoping that The [H] would be able to help.
Here is my current set up that allows my wife and I to have completely independent libraries and ratings, but use the same files:
-Shared folder with MP3s on a network drive.
-Two PCs, each with it's own Ipod associated to it with individual libraries but all pointing to the same network share for MP3 Files.
-Each PC is using the SAME Itunes account for downloads.
-Each account has it's own library folder also on a network share.
Now to my question(s)/problem with downloaded content:
(1) Is there any way to have a file that is downloaded from Itunes be automatically placed in a shared location accessible to both Libraries? (Say if I download the latest Jack Johnson album, can it automatically show up in my wife's library and vice versa?)
(2) Is there any way to share the album artwork versus having two copies of everything(one for each library)?
So my goal is to have two libraries with a central location for ALL files, including anything downloaded from Itunes by each individual user. Is this possible?

Have your wife transfer all purchases from the iPad into iTunes, backup her iPad and then sync with iTunes. Everything ... All media and other content will be available in that iTunes library and she will have a current backup.
Assuming that your son will still be sharing your wife's Apple ID (he is too young to have one of his own) .... When you set up his iPad, restore the iPad from your wife's backup and then select only the content that you want your son to have on his iPad in the iTunes library and then sync that iPad with iTunes.
The game progress is stored in the backup and should transfer onto his device when you restore from your wife's backup. You can always delete any content (apps, movies, music) that you don't want your son to have on the iPad, if you missed it when you synced with iTunes after setting the device up for him.
You can set your sync preferences - any way that you want to - for both devices and still use the same iTunes library for both iPads. So ... Yes you can sync any apps that you want to his iPad and any apps that your wife wants to her iPad. You just need to restore your son's iPad from your wife's backup in order to get his game progress onto his iPad.
In case you need these....
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
Remember to have your wife backup her iPad just before you restore his iPad from the backup so that his most recent progress will be available in the backup.

Missing parts and production storage location

Similar Messages

Maybe you are looking for