Missing threads in space (overview)

If we go to the space Peoplesoft we can see several sub-spaces.
One of them is Peoplesoft OVM templates, apparently with 94 discussions in it (at least this is what we can see).
However, going to this sub-space does not return anything from "overview" tab (message "There is no recent activity") until and unless you go to the "content" tab and then you can see the discussions.
Why such a difference ? Where the discussions go or come from on "overview" tab ?
Nicolas.

Yeah, this is what I understood as well, but I do not understand why such a difference between the two tabs.
It could be mentioned in overview tab result the time period it is taken, and for more details, then go to content tab... one could think there's nothing at all.
Nicolas.

Similar Messages

Where's my missing hard drive space?

I posted earlier about this, it may be a bit off topic but if anyone can offer a clue, I would appreciate it.
I got my win 7 upgrade and was waiting until vista started giving me headaches or the win7 service pack1 came out to upgrade...vista got me to upgrade today and I have to admit it was much less painful than i anticipated.
My question is about the missing hard drive space on my Idea center K230 on the box and on the side of the comp it claims a 640 HD (it claims in small print that up to 18gb may be used for the service partition) I questioned this when i first got it and even after deleting all the preloaded crap it was still saying 540 available out of 580GB....then I read that Lenovo has a huge partition for backup. So when I do my upgrade to win 7- 64 bit, I do a clean install and delete the smaller partition and reformat and expand the larger but before installing the new OS it says I have 596 available, so where the hell is the other 44GB of hard drive...did Lenovo rip us off and put 600GB hard drives in the K230's or is there a hidden partition still left that I cant find?
I am running everything off of my 596GB C: drive, I have my virus stuff and video card extras loaded, everything from the upgrade and 21 available patches and new drivers for most of my stuff....right now I am at at 575gb available and if i can ever find a printer driver that works I will create a backup point or disc from there, whatever win 7 allows. I never wanted the Lenovo one button back up and thought it was stupid to put a big glowing button on the keyboard that wipes your system back to when it came out of the box...I had nightmares of someone getting curious and going "what does this button do?"
.I notice I have a program files folder and a program files (x86) folder with a bunch of redundant files. what's the deal with this is Lenovo still hiding a backup program (maybe in that hidden partition?) that fills my hard drive twice as fast or is there a purpose for the file copies?
Any info on the above questions would be appreciated, and for those of you just looking for upgrade info I have good news, when you finally get your win7 upgrade disc it is the easiest windows installation ever, almost copmpletely automated, and very fast. So far the only sticking point is finding a printer driver, but I have 3 printers i can try, maybe one is supported.

Hi wise2u!
You can read all the details about how storage manufacturers use multiples of 1000 to measure disk space, and Windows reports it in multiples of 1024, and there is some overhead for Windows, or you can just use this rule of thumb from wikipedia:
A general rule of thumb to quickly convert the manufacturer's hard disk capacity to the standard Microsoft Windows formatted capacity is 0.93*capacity of HDD from manufacturer for HDDs less than a terabyte and 0.91*capacity of HDD from manufacturer for HDDs equal to or greater than 1 terabyte.
0.93 * 640GB = 595GB, which is about what you're seeing.
I don't work for Lenovo. I'm a crazy volunteer!

What is a missing thread record (id = 3339624) and what can I do about it?

I was trying to updat my IMac to snow leopard and got an error during the process. I restarted my computer on the HD that I was trying to update and I get the boot screen and then it turns off. I then got it to boot on the SL disk and it got me to the repair prompt and the DU. When I verify the HD I get missing thread record (id = 3339624) and It grays out the HD. After restarting and getting back to the DU I can see it again and all my files on it. I no longer care about updating I just want to be back to normal. I don't have any time machean backups and I am very worried. It makes it even worse being able to see my files but not be able to get to them.

That error message means that Disk Utility can't reconcile the catalog entry for a file and it's location on the hard drive. That could mean a problem with the file or a problem with the catalog.
Verifying the hard drive doesn't fix anything, it just reports it's status. You need to boot to either your Leopard or Snow Leopard DVD, bring up Disk Utility, and repair the hard drive. If Disk Utility gives a failure on exit message or tells you it can't repair the hard drive, then you'll need to use a program like Disk Warrior or TechTool Pro, with Disk Warrior being the program most people use. That should be able to fix the problem. Disk Warrior is available from http://www.alsoft.com/diskwarrior/
If you started a major operating system upgrade without having a backup, you're setting yourself up for failure should a problem arise, but you probably know that by now.

Disk Utility and fsck report 'missing thread records' and can't repair.

Hello,
What first made me realise there was a problem with my iMac was that when I tried to update a application it failed. I then manually download the .dmg of the update and tried replaced the app (Transmission 1.82 being that app in question). This failed, OS X claiming that it could not replace the older version (1.81). I then tried copying the file to the desktop where OS X claimed that there was already a copy of the application and so left a corrupted file on my desktop. This also happened when i attempted to move and copy a couple of pages documents and movie files around. I decided the best thing to do at this point was to reboot my computer; OS X decided it needed to install a couple of security updates at this point. This installation failed.
My iMac booted up, but only after a progress bar has appeared under the Apple logo and spinner and has done its thing (From what I've read this means that OS X is trying its best to resolve some sort of errors). This happens upon every boot.
This made me think that something must be going on with the file system of my Mac so I ran all the tests in Disk Utility. Permissions repair ran fine and fixed a few issues, but when I verified the disk this is what it reported:
"Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 2045563)
Missing thread record (id = 2096282)
Keys out of order
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
I booted up from the DVD and tried to repair; this failed. Next I tried using fsck in single user mode; this also failed. Upon rebooting again and waiting for the progress bar to fill I was able to move files around and update Transmission without issue. Disk Utility still reports the same error.
If I boot into Windows Vista everything works perfectly; as of yet I haven't got around to installing the new Boot Camp update for Windows 7 support incase that changes anything. When running the diagnostic tool on the Windows Vista DVD it reports that everything is fine for Windows.
I really am at a loss for what to do next. All my data is backed up by Time Machine onto a Time Capsule as well as manually onto a FW external. I also made a clone of the Windows partition using the free app Winclone. Does anyone know anything I can do to fix this problem?
Thanks so much,
Sam.

I have been experiencing exactly the same problem here with my MacPro. Apple replaced the hard disk because it was reporting bad sectors. However even with the replacement hard disk I'm experiencing the "missing thread" issue again. I'm guessing its either a software issue that keeps recurring or a fundamental hardware issue. Is the disk controller part of the hard disk or the motherboard? I've never had hard disk problems like this before.
Here's my Disk Utility report from earlier today:
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 1067066)
Missing thread record (id = 1111528)
Missing thread record (id = 1196845)
Missing thread record (id = 1200621)
Missing thread record (id = 1260154)
Missing thread record (id = 1277166)
Missing thread record (id = 1285010)
Missing thread record (id = 1297257)
Missing thread record (id = 1316679)
Missing thread record (id = 1437800)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 155085 instead of 155095)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
Missing directory record (id = 1437800)
Missing directory record (id = 1316679)
Missing directory record (id = 1297257)
Missing directory record (id = 1285010)
Missing directory record (id = 1277166)
Missing directory record (id = 1260154)
Missing directory record (id = 1200621)
Missing directory record (id = 1196845)
Missing directory record (id = 1111528)
Missing directory record (id = 1067066)
Look for missing items in lost+found directory.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume directory count
(It should be 155106 instead of 155096)
Repairing volume.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume MacHD was repaired successfully.

PBG4 with 'missing / dissapearing' disk space issue

My wife's powerbook appears to have 'missing' hard disk space and I can't figure out why. Here is the information from System Profiler about her only hard drive in the computer.
Capacity: 74.41 GB
Available: 6.91 GB
Writable: Yes
File System: Journaled HFS+
The issue is that when I click on her hard drive icon in the Finder view I see 4 items:
- Applications (4.92 GB)
- Library (2.45 GB)
- System (1.07 GB)
- Users (24.17 GB)
This totals 32.61 GB of used disk space
The hard drive is 74.41 GB
So I should have 41.80 GB of free space
Why do I only have 6.91 GB?
Where is the other 34.89 GB?
I have run disk utilities and repaired permissions. I have also run fsck by booting while holding apple-S. I've looked at the logs in /var/logs and nothing is bigger than 2MB.
Anyone have any ideas?
Thanks.

We upgraded the OS to 10.5 and the issue is gone.

How can i get the list of DB02's Table spaces-overview?

Dear Experts,
Could you help me about how can i get the list of DB02's Table spaces-overview? which function module can do it?
Thanks a lot

Hi,
Execute this FM DB02_ORA_FILL_TD110
U will get all the details of table spaces in the importing parameter TD110 of that FM.
Reward if helpful
Regards
Vodka.

Missing Thread Record and Invalid Extent entry when booting

Hi all,
When I boot up my PowerBook G4 it freezes. When I boot into single user mode and run fsck -fy I get the following messages:
** /dev/rdisk0s3
** Root file system
** Checking HFS Plus volume
** Checking Extents Overflow file.
** Checking Catalog file.
Missing thread record (id = 72)
Invalid extent entry
(4, 14531)
** Volume check failed.
I do not have Disk Warrior nor the Apple disks with me. Any help you can provide is greatly appreciated. Navigating my disk in single user mode seems to have all my directories etc.
Thanks!

I am trying to back up my data now. I only have my FAT32 formated iPod with me and I'm trying to mount it to backup my photos before I reinstall. Unfortunately I do not see my iPod popping up in /dev at all so I cannot even mount it.
It's a USB connection so I suspect that single user mode doesn't pick it up... Any advice on how to mount a filesystem from my iPod in single user mode is much appreciated.
Thanks.

Second hard drive missing thread error

Hello, I've got a macbook pro with 10.8.5 running. I have had a second 1Gb hard drive installed in the optical bay and it's been running for a long time with no issue. I booted up today and noticed the drive would not show up in finder. I ran disk utilities and it said there was a sibling link error and it suggested I repair the disk using disk utility. I ran disk repair and a new error popped up during catalog file check: there are 5 missing thread record (id = xxxx) errors and two "Incorrect number of thread record errors". Then it says the volume could not be verified completely and ultimately ends with Error: Disk Utility can't repair this disk...disk, and restore your backed-up files. I noticed the volume name changed to disk1s2 and I can't mount it. Now I'm stuck. I looked at recommendations for more elaborate disk repair programs that can be purchased but I see so many negative recommendations on all of them I'm not compelled to purchase. I definitely need to recover the data on the drive so I am pretty disappointed at what disk utility seemed to do to the drive (it appears to me to be worse since the volume name is changed (before I ran disk utilities when I had the sibling error I saw that the volume name was correct) and I can't do anything with it.) I'm stuck and could use some good advice. This is not a boot drive just a data drive.
Also if anyone could say what this sibling error was and what the thread errors actually are that would be a bonus (I'm an old timer hardware engineer and just want to know )

Normally, those errors are WRT the disk's directory. You need something stronger, such as DiskWarrior, TechTools Pro, or Drive Genius. All of are reliable and should do the job. Disk Utility has many shortcomings and repairing disk directory errors is one of its biggest.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

DB02 - space overview display zero values

Hi Friends,
When I executed DB02 t-code. I got zero values in the fields (Database, Users, Tablespace, Segments)
I got the same with ST04 -> Space Overview.
So, Please tell me the solution for this.
Thanks & Regards

Hi Varadhu,
As per your guidance, I tried to check SAP_COLLECTOR_FOR_PERFMONITOR job which is scheduled hourly.
It is executed successfully. But, When I checked the Job Logs , I found something wrong in this. I mention this as below:
"Message text"
Job Started
step 001 started (program RSCOLL00, variant, user ID SHISHYA)
Clean_Plan: Cleanup of DB13 Plannings
Clean_Plan: Started by RSDBPREV on server sarswati
Clean_Plan: Cleaning up jobs of system SD1
Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error
Clean_Plan: terminated with error
REASON=Job error
Database system not supported
Job finished
I have checked system time zone in the tcode STZAC which is correct.
So, Please tell me how to resolve this issue.
Thanks & Regards

Time machine restore: missing thread record

Hello everyone,
I recently upgraded from Lion to Mountain Lion. I did a clean install. I have been backing up with Time Machine to my Lacie Cloudbox NAS. My NAS requires authentication.
I am unable to restore my files. I have tried it during installation and with Migration Assistant. I can see my .sparsebundle through Finder and mount it (and see an inprogress with loads of folders inside of it). I am unable to copy the files directly to my desktop because of an permission warning.
From Windows I can see loads of files inside the bands-folder. They are all equal in size. I found a clue that maybe the most recent ones are corrupt, so I moved two days worth of them out from sparsebundle.
Disk utility says the drive needs to be repaired. I tried this, and got loads of errors. I there are so many of these that I have shortened the list below a lot. Please help me, all my valuable files are inside the .sparsebundle (510 gigs). I don't care about automation, I just want them out.
Verify and Repair volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 381217)
Missing thread record (id = 383288)
Missing thread record (id = 383627)
Missing thread record (id = 384165)
Missing thread record (id = 384442)
Indirect node 380893 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951259)
(It should be 0 instead of 1951258)
Indirect node 380895 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951262)
(It should be 0 instead of 1951261)
Indirect node 380897 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951265)
(It should be 0 instead of 1951264)
Indirect node 411674 needs link count adjustment
(It should be 1 instead of 3)
Orphaned file hard link (id = 1286100)
Orphaned file hard link (id = 1286101)
Orphaned file hard link (id = 1286119)
Orphaned file hard link (id = 1286120)
Orphaned file hard link (id = 1286121)
The volume Time Machine Backups could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

The backup disk image is corrupt. You might be able to repair it by holding down the option key and selecting Verify Backups from the Time Machine menu. But that may also result in a total loss of all backup data. Backing up to a third-party NAS is unsupported by Apple and unsafe. You should back up to a locally-attached storage device.

The Property Inspector is missing the V Space and H Space fields in DW6 - where did they go?

I just downloaded DW6. The Property Inspector is missing the V Space and H Space fields, therefore I am unable to add space around my images. Suggestions?

It is no longer available because the problem with that was that it applied spaces around the image rather than where the user actually wanted them. You now need to use CSS and apply margins and paddings and target exactly where you want them by using something like this:
img {
    margin-bottom: 0;
    margin-right: 0;
    margin-left: 0;
    margin-top: 0;
    padding-top: 0;
    padding-right: 0;
    padding-bottom: 0;
    padding-left: 0;
img {
     border: 0;
     padding: 0;
The second style is generic to set margin and padding for all four sides.
Good luck.

Another BORIS MISSING thread.

Hi,
I've been looking at several BORIS MISSING threads trying to find a solution, and have not found a good one yet. Here is my problem:
Originally purchased FCP studio 5.0 in 2005. Noticed Boris was missing (never needed it) about a year ago and never figured out how to get it back (didn't try very hard). Upgraded to 5.1.4 about two weeks ago, and it's still missing. Trashing preferences doesn't help.
The specifics:
Boris does not show up under generators in effects tab or in viewer generators popup.
BorisFX folder is in Application Support as it should be, and all necessary files (as mentioned in other threads) seem to be in place. What's more, if I create another account, BORIS WORKS. But I don't want to login to another account every time I want to use Boris.
Something I've noticed: I seem to recall that Boris file icons in Application Support>BorisFX were some sort of "Kind: After Effects" Icons prior to my 5.1.4 install (also prior to my recent purchase of Photoshop). Now they are either "Kind: Unix Executable File" or (under BorisFX>Gradient Styles) "Kind: Adobe Photoshop Gradient File". Would this have anything to do with my problem? Anyone have any ideas for me?
Thanks,
Matt

1. Open your system Plugins folder (not your own FCP User Data folder):
Macintosh Hard Drive/Library/Applications Support/Final Cut Pro System Support/Plugins
2. Copy these folders to the desktop:
Text Scrambler.bundle
Title 3D.bundle
Title Crawl.bundle
Vector Shape.bundle
3. Change the extensions on all four desktop files from bundle to .plugin
This requires password authentication. They will become blank icons.
4. Delete the original .bundle folders from the Plugins folder
7. Move the desktop .plugin files to the Plugins folder
8. Launch FCP and they should now show up under the "Boris"
generators category

DB02 table space overview display wrong sizes

Hi all
I get this result when I run the transaccion DB02 and table space overview
Tablespaces: Main data   (Last analysis: 13.12.2009 04:00:29)
PSAPSR3                 55,000.00     2,458.31
PSAPSR3700           44,980.00     2,128.50
PSAPUNDO               5,060.00     4,921.94
PSAPTEMP               2,000.00     2,000.00
SYSTEM                                 880          14.38
SYSAUX                                 340          20.75
PSAPSR3USR                       20               14
Its displaying wrong informaction. The correct its the informatcion below and I get with a detailed analysis.
Tablespaces: Main data   (Last analysis: 21.07.2010 13:04:51)
PSAPSR3                     75,000.00     4,352.13
PSAPSR3700          44,980.00     1,634.44
PSAPUNDO              5,060.00     4,752.81
SYSTEM                                880     10.25
SYSAUX                                360     23.5
PSAPSR3USR                      20     13.31
PSAPTEMP                          0     0
I think is for the date of the last analysis, but I dont know how to update my table space overview analysis: i will appreciate it any one cant tell me how to update the analysis.
Best regards.
Edited by: Alvaro Olmos on Jul 21, 2010 8:16 PM

To refresh the table space overview do :
DB02 ->Refresh->there you will find two options choose second one
And it will refresh the tablespaces.
Or you can also schedule update stats job daily to update it automatically.
Regards,
Shivam

Space Overview on ST04

Dear all ,
I have checked sto4 > Space>Space Overview , it show below Space overview detail.
DB Name       IRP        Started       17.10.2010
DB Server     PRODORADB                06:45:21
DB Release    10.2.0.4.0
      Name         DEFAULT                               Filling degree:
DB system:        ORA
Size:                   246.86 GB                       Total size:                 410.16 GB
Free Size:               15.85 GB                       Total free size:            179.15 GB
Used:                       94 %                        Total used:                     56 %
What will happen if the Total Free size will reach 410GB ?
Kindly advise

Hi,
This Total size: 410.16 GB is the free space calculated considering data files can grow to the maximum specified limits.
(that is MaxSize of the Datafiles)
Then Size (in ur case 246.86) refers to the total "current" size of all the database data files.
(that is datafiles, already filled)
You better to check the space from Tablespace point of view. Mainly all R/3 Data resides in PSAPSR3 tablespace
There you check; how many datafiles available and the free amount available.
and by considering the DB growth and available free space in PSAPSR3 you can get idea about the remaining space usage.
While reaching this limit, you need to add additonal data files to the identified tablespaces either on the exisiting file system or a new filesystem depending on the free space availability there.
From my experience this 410.16 GB not telling that much. better to explore from tablespace level / datafile level.
regards,

I have an iMac and I want to use it as WLAN Hotspot. But I miss Airport in the overview to choose from. What is wrong? And who can help me?

I have an iMac and I want to use it as WLAN Hotspot. But I miss Airport in the overview to choose from. What is wrong? And who can help me?

Hello Mark,
Have you done these 2 things?
Under he Airport icon choose Create Network...
And in System Preferences>Sharing, have you setup & enabled Internet Sharing?

Missing threads in space (overview)

Similar Messages

Maybe you are looking for