Mixed up settings?

On my curve in the message lists I had it set to be able to read emails, instant messages, and texts. Also it showed each conversation, the ones sent and received for each contact. Now it doesn't and I have to actually look for what I sent, and my emails. I have checked the settings and can't figure out what has happened. Can anyone help me so I can return to being simple?

Have you taken the steps recommended in the User Guide: restart, reset, restore?

Similar Messages

"Audio Mix" volume settings premiere elements 10 not "sticking"

The "Audio Mix" volume settings that I set after adding a soundtrack to video in premiere elements 10 have stopped working and are no longer "sticky". I am running premiere elements on a Macbook pro with about 100GB free disc space and 8MB RAM. The volume settings adjusted using "Audio Mix" would previously "stick" as adjusted. I have not altered anything in how I adjust the volumes but "Audio Mix" has suddenly stopped functioning. Both the soundtrack and main captured audio track maintain full volume despite adjustment. I have tried to restart the computer and reload the program to no avail.

Correct.
I used to be able to adjust the volume with the Audio Mixer "on the fly" with the video playing and it would stay adjusted (as depicted in the tutorials). This no longer happens. The Mixer used to generate keyframes automatically. It no longer appears to generate keyframes and the volume remains at baseline for all the tracks.
I have not tried to manually set the volume level by dragging it and creating audio keyframes on it yet. I will try this but the videos are long with multiple fade ins and fade outs and this would likely be too laborious to accomplish.

Can't launch Mixer, Speaker Settings, etc with Audigy 2

I wanted to use headphones with my card, but found that I had no sound at all. Checking the speaker settings, I discovered that the dropdown wasn't populated. (I discovered a thread on Tom's Hardware forum mentioning this problem, but no-one seems to have a fix.)
I tried?resetting to defaults, but got an error message saying that not all settings could be restored. I also tried the "Repair" option in Add/Remove Programs without success.
I tried doing a complete removal (using the KB instructions)?and re-installation. Apart from getting an error message about PlxCore.plx missing (which I fixed by copying the file manually), the re-installation completed.
However, I find that I can't launch many of the utilities, such as the mixer, EAX console, speaker settings. If I right-click on the volume control icon, nothing happens.
There is a grey square at the top of my desktop that looks like it might be a partially-rendered toolbar.
I also can't see an uninstall option in Add/Remove Programs for MediaSource. None of the MediaSource programs will launch either, but I can't uninstall them.
I do have sound, but I have to use the windows volume control.
I don't know what else to do. I have been through the re-installation procedure half-a-dozen times.

Thanks, but it looks like I'm out of luck.
I used the utility, but it didn''t help. (It also seems to have messed up my FireFox installation, for some reason).
After booting into safe mode and running the utility, I tried installing again (and got the plxCore.plx error again). Results were even worse than before - I still don't have a working installation, and now I can't even uninstall the drivers - I get an error saying "an event was unable to invoke any of the subscribers."

Audigy SE + Mixer Latency settings?

Hey everyone,
I'm fairly new to Audition but know most of the basics after working with the program at our local radio station for a few months. Here's my problem though. I've setup a little studio in my room for my band to use to record some of our songs for a demo cd.
For a setup, I have my computer with a Creative Audigy SE sound card in it for the input. I then have a Behringer 10 channel powered mixer that im using to line in all of the mics to and set their levels, then im lining out from that into the input on my Audigy sound card.
Im recording in 32 bit mode in Audition but as I expected I am experiencing delay between recorded tracks (piano, drums, guitar, etc). The tracks fall in and out of sync throughout the song, and its not by too much but at parts its certainly noticeable.
I know there are ways in Audition's settings to adjust for this but I was trying to figure it out and wasn't sure exactly what needed to be tweaked and where. Could anyone provide instruction on how to do this, and does anyone know the proper value for the Audigy SE card? Also, would the mics going through the mixer add any additional latency or is the latency just created in sound cards because of processing and stuff...
And if this info is needed, here are my system specs:
Windows XP Home 32 bit
Intel Core 2 Duo 2.66 GHz CPU
2.5 GB DDR2 RAM
I also have onboard HD Realtek audio, not sure if that would have any latency issues, but im wondering what would have better quality, my Audigy or the onboard sound...
I appreciate the help,
thanks,
Jared

>I also have onboard HD Realtek audio, not sure if that would have any latency issues, but im wondering what would have better quality, my Audigy or the onboard sound...
The Audigy might be a slight improvement over the onboard sound in audio terms, but Creative Labs have always had big problems with their drivers, and their ASIO ones are no better. If you have sync problems as well (something else they have been noted for in the past), then quite frankly, I think you'd be better off ditching the Audigy and getting a proper sound device. If you search around this forum, you'll find plenty of advice and recommendations about that.

Mixed security settings on WDS network

I posted this under the 802.11n topic; many views but no responses. I apologize if dual posting is bad form, but I really would like to get some help with this issue.
I have a wireless network consisting of an Airport Extreme N and three Airport Expresses, one of which is N-capable. They are set up as a WDS network with the Extreme as the main, the Express N as a relay and the two other Expresses as remotes. One of the remotes is linked to the main, the other accesses the network through the Express N relay.
My question: How do I set up security so that a device which only supports WEP can access the network while other devices, including my laptop and my wife's desktop Mac Pro can use WPA2? The Extreme and the Express N use WEP Transitional, while the other two Expresses use either WPA2 or WEP.

See the reply on the AX 802.11n forum.

Creative MediaSource 5 stuck on "follow Mixer Settings" --????

I'm trying to record from my auxilliary source and I can't get the "source" setting off of "follow mixer settings."? That is the only source choice given--no mic choice, blue, green, etc. I can't change it. I was able to make this choice before but not now since I reopened MediaSource. What can I do about this?

I had the same trouble. Here's how I managed to do it:
There are multiple places in Windows and in the Soundblaster software to change the speaker settings. I don't know how they interact. I suppose that these settings track each other, at least they should. A few places where I found speaker settings:
Windows control panel - Sounds and audio devices. Can be accessed via Media player also.
Through the Soundblaster Surround mixer - speaker settings
Through the THX console.
I went through the THX console, since it allows a halfway detailed setup. Go to the speaker setings first, select whatever speaker setup you have. Should be something with a . in there, since you have a subwoofer. Then go the calibration tab. The speakers you have chosen should now be "acti've", not greyed out. There is a checkbox to enable a test sound. When you put your cursor in one of the speaker setting fields on the right pane, the test sound should go to that speaker and alternate between that speaker and the "reference" speaker. The subwoofer level should also be adjustable from there. It is actually a lot louder test sound to the sub in the THX console, compared to the surround mixer test sound. I have to crank my volume way up to hear the sub in the surround mixer.
Good luck!

When testing speakers form the Sound mixer....no center channel so

I have a Sound Blaster Audigy MP3+ sound card, everything has been find up till now. When I test the speakers in the 5. configuration from the sound mixer the voice gives me sound out of each speaker except the center channel. I have updated the drivers etc.
I can hear sound through the center speaker but not during the test?
Any ideas?

this might help or maybe not.
has your sub got a setting for direct mode. if you have set it to direct, then check your setting in organizer/player.
eax, mixer, speaker settings.
john

Line-In doesn't appear in the mixer (Audig

The Line-In is dead, and I suppose it's because this source doesn't appear in the mixer.
Because of this, I'm cannot enable the soucre. And then I get no soud.
If I choose "SB Audigy 2 AZS Audio" as default for recording, I'm missing the option to choose Line-In in standard Windows mixer. (The slider isn't there.)If I choose "C-Media Wava Device" as default for recording, I can choose Line-In in standard Windows mixer, but I don't get any signal.
I have installed the last drivers.
Hope you can help me!

OK, sound some better.
Can you run the Creative diagnostic tool without errors?
If you do not find next programs mentioned, you have to install them
(Creative CD bundled with cadr).
Have you AudioHQ on System Control Panel.
- Is speakers set to be muted when using headphones. Uncheck this.
- options : is SB Audigy xxxxx selectedt as sound device?
Control Panel:Sounds & Multimedia
- Audio : is Sound Play Back devic selected to be SB Audigy xxxx
- is all behind Volume (button) set not muted
Check if mic and midi settings are like you want.
- is all behind Advanced (button) set like it shoul be
Hardware : Creative audigy xxx - properties : Creative xxxx (WDM)
- is use this audio device selected
- is do not map through this device selected
Creative Surround Mixer
Speaker settings
- set same settings as above (and select syncronization with control panel)
- unselect digital output only
Rec settings (red portion with slider)
- select AnalogMixer as source
- check if record without monitoring is not checked
- disable unneeded inputs (mic, aux, ...) - wave, volume, linein should be ON
- set input and recording levels
EAX -panel
- switch off all effects if you do not need them
This come into mind now ... hope it helps ...
.jtpMessage Edited by jutapa on 04-07-2005 02:47 AM

Test Mix Distribution

In Vs 2013 load test, we have an option to distribute the % for selected webtests.
For example:
Let say if we select 1000 consant users and
distribute 50% , 50% between two tests(WebTest1, WebTest2). Then is it 500 users run WT1 test and another 500 user run WT2 tests
Simarly if we specify 50% LAN and 50% 3G, Does is mean 500 users run on LAN and 500 users run on 3G ?
is this the same case with Browser distribution ?
Please share your thoughts

Hi kumaranil36,
>>distribute 50% , 50% between two tests(WebTest1, WebTest2). Then is it 500 users run WT1 test and another 500 user run WT2 tests.
The real issue would be related to how you setting your load test wizard.
http://blogs.msdn.com/b/edglas/archive/2009/10/19/using-the-virtual-user-activity-chart-to-understand-the-vs-load-engine.aspx
For example, if your two tests run 1001 times, it means there are v-users who run a test more than one times since just 1000 v-users. So it is hard for us to make sure that 500 v-users run the same tests.
Maybe you could think about use the Test Mix Based on the Number of Virtual Users Starting Tests like this case posted by you:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/8309e05d-d5bd-4dd3-8add-914bcb4c2a73/test-mix-in-load-testing-vs-2013?forum=vstest
>>Simarly if we specify 50% LAN and 50% 3G, Does is mean 500 users run on LAN and 500 users run on 3G ?
For this issue, I think it is similar to the above suggestions, it would be related to the detailed settings under the load test wizard.
This Distribution is a measure of the probability that virtual user will use a particular network type during a load test run, but the v-user would be related to the Test Mix mode settings or other settings like running settings.
For example, if you just select the "test iterations=100", it means that it just run 100 tests, so not all v-users will run the tests.
>>is this the same case with Browser distribution ?
The same as the Network Mix.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installing surround mixer T

I just reinstalled XP. I have an Audigy 2 ZS. I downloaded the drivers and everything works fine except that I'm missing the Creative Labs tray icon with surround mixer, speaker settings...etc. I'm assuming it just wasnt included in the driver download. Where/how can I get this installed? Any help is appriciated.
By the way, the driver file I installed was:
Filename: SBAX_WEBUP_LB_2_08_0004.exe
Thanks

I have renewed my primary HD.
I have installed OS Windows XP Professional and reinstalled sound card drivers (everyone and up to date).
My sound card is (again) Sound Blaster Audigy 2 Platinum.
I inquiry to test (Creative diagnostic, System in Control Panel, ecc ecc)....
every answer tell me that's all ?OK? but ...<only Wave Studio work fine!!!
I attempt a lot of solution but "control fader" show me only a red cross in tool bar, "surround mixer "don't march, ecc ecc
ciao
Giorgio D.G.:smileysurprised:Message Edited by Giorgio_DG on 07-25-2005 :46 PM

Creative Support =

I m about to tell a story about how bad Creative support is. First I email them. I ahve to send what year I bought my card. I put a random date cause I'm to lazy to look for the invoice. I theng et a email a couple days later saying they won't help because my card is to old. I then email them again but saying I bought the card within a month. They then email me back a couple days later again giving me a couple obvious things to look up that had nothing to do with my problem. Then I reply back giving so much detail into my problem that a 5 year old would understand it fully. Then I get a reply a couple days later and it links me to download the latest drivers. OMG I ALREADY HAVE THE LATEST DRIVERS. If Creative wants to call it sound cards for gamers then they should fix a major problem for the most success online action game of all time Counter-Strike. What I've been wanting all this time is for them to code a locking tool into the surrond mixer so you could choose to lock the voice to only mic. I jsut though of a slogan for Creative "We are Creative and think of Creative-vly bad responses to your support emails. "When writing your message, remember to keep the language clean." - Like thats gonna happen when people have to go through this horrid support.Message Edited by defi on 07-25-2006 08:07 AM

Did you try what they listed in FAQ\support section at steam? Anyway here's a link to the very first thing I found when doing a search for "Mic"
Problem: Microphone input switches when launching a game<IMG height=6 alt="" src="http://support.steampowered.com/rnt/rnw/img/trnsp.gif" width=> Question
I have all the recording settings for my mixer and select Line /Mic, and it works before I play a game, but whenever I start CS it sets the recording device to Wave Out Mix, instead of Line /Mic. As a result the game engine is binding it's mic input to the wrong source on the sound card.
I can alt-tab out of the game and set it back to Line /Mic then it works for the test in the options menu, but when I join a Server it puts it the mic back to Wave Out Mix again so my mic won't work.
How do I fix this?
<IMG height=6 alt="" src="http://support.steampowered.com/rnt/rnw/img/trnsp.gif" width=> Answer
Other software applications like CD Recording programs can change the wavein input to come from the CD player instead of from the microphone, then when players try and use their microphone in the game it won't work.
To solve this, the HL engine tries to make sure the mixer control settings are set properly when the game runs, but not all soundcards work the same way, especially very high-end sound cards like Audigy 2ZS pro cards.
To prevent the HL engine from trying to set the mic input, players need to set this CVAR in their userconfig.cfg file or in the launch properties of the game.
Add this line in userconfig.cfg:
voice_forcemicrecord 0
or in the launch properties for each game you play:
+voice_forcemicrecord 0
(you don't need both)
This will prevent the engine from attempting to configure the mixer settings.
You might also check and make sure these settings are correct:voice_enable ""sv_voiceenable ""voice_scale "0.75"voice_enable ""voice_modenable ""voice_dsound ""voice_modenable ""
Message Edited by bratboy on 07-25-20062:49 PM
Message Edited by bratboy on 07-25-2006 2:50 PM

How do I escalate a call when tech support lose intere

-----Original Message-----
From:
Sent: 24 March 2005 7:6
To: 'CLE Customer Support'
Subject: FW: How long do you expect me to wait for a reply?
Do I have to go to trading standards to get you to honour this warranty? This is a disgrace - sort it out. This is extremely poor customer service and a breach of your warranty.
-----Original Message-----
From:
Sent: 22 March 2005 08:5
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
How do I escalate this call? I have a card that is not working under warranty and you seem unwilling to answer my mails any more. I hate to be the bearer of bad news but you have to. This card must be fixed or replaced, and it would be nice if that happened sooner rather than later. Why am I doing all the chasing by the way, you're a big enough supplier to get this sort of thing right, aren't you?
Rob.
-----Original Message-----
From:
Sent: 7 March 2005 08:40
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Hello, it's me again, not heard from you for 5 days. Are you planning to reply? You have obligations of warranty which you are summarily failing to carry out here. Please sort this out!
Rob.
-----Original Message-----
From:
Sent: 3 March 2005 7:28
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Situation changed. Having restored settings to previous state after doing all the below, about a day later I now have no sound at all for no reason whatsoever. I have rebooted, re-checked all connections etc etc, sound has just disappeared in the middle of the day without changing anything. It was fine this morning and now it's completely silent and PC's been on all day. This card is definitely dead, what else would do that?!?!
Cheers,
Rob.
-----Original Message-----
From:
Sent: 2 March 2005 6:03
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Hi,
OK, I can't test on another PC as I don't have access to one, and I really dohope this is the last set of tests incidentally. It worked, then it stopped one day. A complete reformat and clean driver install didn't fix it. Re-seating the card didn't fix it. Seems pretty straight forward to me the card has failed, and I do need it replacing.
I have however done everything else below as requested. If I select CMSS, I get no output for rear-left/rear-right using channel test. If I select CMSS2, I get output from the front speakers for rear-left/rear-right channels, but nothing from the rear.
If I configure to 5. and enable CMSS I get output from jacks and 3 (orange & green)of the soundcard in the left headphone earpiece.
Hear from you soon,
Rob.
-----Original Message-----
From: CLE Customer Support [mailto:[email protected]]
Sent: 2 March 2005 03:7
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Dear Rob
Thanks for your reply
Please test the soundcard on another PC(With different motherboard) Ensure onboard soundcard is disabled.
Run creative diagnostic test, any problems?
Go to device manager, is there any problem with soundcard?
Configure the speaker setting as 5..
Please enable CMSS and play MP3.
Use a earphone and connect to line-out of soundcard.
Any sound?
Now please try on line-out3, any sound?
Please verify the correct jacks you are connecting..
CMSS is an option that allows you to play your audio to all 5. speakers even if you are not playing a true 5. encoded audio file. For example, if the sound is a stereo sound, it will duplicate the front channels, and send them to the rear channels. Then it will mix the left and right signals to create a center channel. Turning CMSS on basically simulates
5. audio.
TO TURN ON CMSS IN Mediasource
. Open MediaSource (Start, All Programs, Creative, Creative MediaSource, Creative MediaSource Organizer).
2. There should be an EAX button underneath the Record button at the bottom of the screen, towards the left. Beside this button, there should be a small ellipsis button (. . .) that you can press. Click on this.
3. Go to the CMSS 3D tab and check the box next to "Enable CMSS 3D"
4. Place a dot next to either CMSS or CMSS2. Whichever sounds better to you.
It is important to remember that if you do wish to play a 5. encoded file, you will need to turn CMSS off. Otherwise you might not receive each discreet channel.
Please retain all the previous correspondence when replying to this email.
Best Regards
Creative Customer Support Services
Creative Labs Europe
To provide feedback on your "Creative Experience" and our service please click on the following link:
http://www.**bleep**.com/support/con...asp?r=CLE&d=TS
Please do not use this link to submit technical queries
Original Message Follows:
Hi,
Tried all that and still no joy unfortunately. Everything ok except output from rear-left and rear-right.
Always disable onboard sound nad have just reformatted XP and reinatalled with drivers from creative website, so I know installation is not corrupt and up-to-date. I also had this problem before re-installation of XP, so suspect hardware rather than software failure.
Have removed all traces of card/drivers and tried again and moved PCI slots with same results.
Cheers,
Rob.
-----Original Message-----
From: CLE Customer Support [mailto:[email protected]]
Sent: 0 March 2005 03:37
Subject: RE: CLE - Technical Support Request (KMM5590925I2452L0KM)
Dear Rob
Thanks for your reply
Rear center is fine in speaker test...
Anyway if you have test the speaker with another device and no issue for rear channels, there is no problem with speaker system now...
Please insert the soundcard on another PCI slot, and make sure it is firmly inserted. Please disable any onboard sound card if available through BIOS.
Go to Control Panel, Add Remove Programs and un-install all listings related to your audio card. Do not restart your computer when prompted so.
Go to Control Panel, and switch to Classic View. Click System, Hardware tab, Device Manager button and delete all sound cards entries in Sound, Video and Game Controllers as well as any previous sound card entries from the Device Manager.
Reboot the computer and cancel out of any driver installation if you are prompted. Insert the Creative Sound Blaster installation CD into your CD-ROM dri've. Exit from the installation wizard if it autoruns.
Click Start, Run and then Browse. Browse to Z:\Audio\Drivers\CTZAPXX.EXE, where Z represents the CD Rom Dri've.
Choose YES if you receive a prompt "Overwrite existing shared creative audio driver files?"
Select Driver un-installation for WDM drivers and click OK.
When prompted to restart, say No.
Click Start, Run, type MSCONFIG and press Enter.
Check the box next to Selecti've Startup and deselect Load Startup Items.
Select the SERVICES tab and select Hide All Microsoft Services.
Uncheck all results and click OK.
Browse to the C:\Temp folder and C:\Windows\TEMP (if it exists) - all files and folders in the temp folder need to be either deleted or moved to a new folder.
Browse to Program Files, Creative and delete the Sound Blaster Folder - if you get a file that won't delete, right click on the file, click Properties and clear all the attributes. The file should then be able to be deleted.
Empty the Recycle Bin, and reboot the computer.
If you wish to reinstall your software & drivers, do this now. For more information on how to install your product, please visit the Product Guide page for installation instructions. Otherwise, go to the next step.
Click on Start, Run. Type MSCONFIG and press Enter.
Select Normal Startup, and press the OK button.
Reboot the computer
Run creative diagnostic test, any problems?
Configure the speaker setting as 5.
TEST CARD WITH HEADPHONES
. Run speaker test
2. Plug headphones into the front out jack 3. Click on the speaker test button 4. In the headphones you should hear a voice for front left, and front right.
5. Plug headphones into the rear out jack 6. Click on the speaker test button 7. In the headphones you should hear a voice for rear left and rear right.
8. Do you hear sound from each channel?
Any sound from rear channels?
Please retain all the previous correspondence when replying to this email.
Best Regards
Creative Customer Support Services
Creative Labs Europe
To provide feedback on your "Creative Experience" and our service please click on the following link:
http://www.**bleep**.com/support/con...asp?r=CLE&d=TS
Please do not use this link to submit technical queries
Original Message Follows:
Hi,
I have done the below, and get output via a walkman connected directly to the sub on both front and rear speakers no problems at all.
I have reconnected the cables from the sound card, run channel test again in speaker settings, and still get no output from rear-left and rear-right.
I should have mentioned before that rear-centre is fine.
Any further help will be greatly appreciated.
Cheers,
Rob.
-----Original Message-----
From: CLE Customer Support [mailto:[email protected]]
Sent: 09 March 2005 08:40
Subject: Re: CLE - Technical Support Request (KMM557969I2452L0KM)
Dear Rob
Thanks for contacting Creative Technical Support.
Please use an external cd player and connect to the front input on the subwoofer.
Play the CD, any sound?
Now try on the rear input.
Play the CD, any sound from the speakers?
Now please connect back the speakers to the PC.
Ensure you have connected properly.
Ensure you have configure 6. speaker setting, run a speaker test.
Any sound from rear channel?
Ensure the balance control is configure properly as well
Please retain all the previous correspondence when replying to this email.
Best Regards
Creative Customer Support Services
Creative Labs Europe
To provide feedback on your "Creative Experience" and our service please click on the following link:
http://www.**bleep**.com/support/con...asp?r=CLE&d=TS
Please do not use this link to submit technical queries
Original Message Follows:
=======================
Subject: CLE - Technical Support Request
Name:
E-mail Address:
Self Description:
ID(3) Advanced PC User
Country: United Kingdom
Support Inquiry: ID(3) My Creative hardware stopped functioning correctly
Product: Sound Blaster? Audigy? 2
Purchase Date: 4/3/2004
Serial Number:
Operating System: Windows XP
Creative Model Number: SB0240
Computer Brand/Model: self built
Processor/CPU: Athlon 3200+
Memory: 2xgb DDR400 Dimms
BIOS Type/Revision: Phoenix - rev 008
System Board/Chipset: ASUS A7N8X Deluxe rev2.0
Detailed Problem Description:
Typical, following months of trying to get a replacement remote control cable for my inspire 6. 6700 the 2 rear speakers on the set don't play sounds any more. I have done a clean XP install to ensure no driver corruption, but no difference. It's not the subwoofer as I have a spare, unused sub and that gives the same results.
I have also checked all cabling, mixer/volume settings and nothing unusual is showing.
Of course, my audigy 2 card is my guess as the culprit, I can't be positi've though. All other speakers operate perfectly, can even hear background hiss through the rear-left and rear-right speakers which won't play sounds/music/games or anything at all. But when I select "Creative Speaker Settings" to test the channels individually, they don't play a test sound here either.
Any help greatly appreciated.
Cheers,
Rob.
PS: Please remove the technical support advisor name when posting quote from the email.Message Edited by Jason-CL on 03-30-2005 06:7 AM

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

How do I restore tab behavior back to the way it was in FF 3.5??

I just upgraded to FF 3.6.13, I generally wait to upgrade until any new bugs have been identified and corrected. In FF 3.5, when I opened a new tab from a link, the new tab appeared to the right of the current tab (NOT at the very end of the tab bar) and the focus STAYED ON THE CURRENT TAB. If I opened multiple new tabs, they each opened to the right of the previously opened new tab, as in <original tab sequence> Yahoo Facebook GMail MyBlog <New tab sequence after opening links> Yahoo Facebook NewFBLink1 NewFBLink2 NewFBLink3 NewFBLink4 GMail MyBlog, with the focus remaining on the CURRENT TAB (in this example Facebook, from which I was opening the links). In 3.6.13, the tabs SOMETIMES open to the right of the current tab, sometimes at the end of the tab bar, and no matter how I fiddle the settings, I cannot make them CONSISTENT. Have tried the extensions 'Tab Mix Plus' and 'New Tab at End' - these do not give me consistent behavior - sometimes they do as I wish, sometimes not. In addition, sometimes the focus stays on the current tab (which is what I want) - sometimes the focus changes to the new tab just opened, sometimes it stays on the current tab until I've opened 3 or 4 new tabs, then jumps to one of the new ones. In the 'options', I do NOT have 'when I open a link in a new tab, switch to it immediately' checked; yet sometimes it does, sometimes it doesn't. HOW do I achieve consistent behavior?? This is why I don't upgrade often. Very frustrating. I have not changed any plugins, other than trying Tab Mix Plus and New Tabs at End after upgrading to 3.6.13, once I realized that the tab behavior was not consistent. How can I go back to FF 3.5 ???

First of all, sometimes Extensions can interfere with one another. That '''''MAY''''' be the case with your using both Tab Mix Plus and New Tabs at End. They both have a function that you can set for where new tabs appear. TMP has options concerning focus on new tabs.
My suggestions are:
#Un-install New Tabs at End (Tools > Add-ons > Extensions, click New Tabs at End, click Uninstall, then exit and restart Firefox).
#*If using no other extension that affect where tabs appear (to the right of current tab or at end of all open tabs), a simple preference change can affect that change for you, and you have one less extension to be concerned with. I have also made this change as TMP did not have the Focus options to do this when the "new tab at end" feature first appeared or when I first started using the version of Firefox in which this feature appeared:
#*#Type '''about:config''' in the URL bar and press the Enter key.
#*#*See: http://kb.mozillazine.org/About:config
#*#If you see the warning, accept it (promise to be careful).
#*#Filter = browser.tabs.insertRelatedAfterCurrent
#*#Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
#*#Double-click that preference to toggle the value from true to false, or false to true
#*#Restart Firefox (File > Restart Firefox)
#*#See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/
#Tab Mix Plus settings
#*Open the Tab Mix Plus Options (Tools > Add-ons > Extensions, click Tab Mix Plus, click Options)
#*Click on Events > Tab Opening
#*#Place a check mark before "Open new tabs next to current one"
#*#I have checked "Open other tabs next to current one"
#*##I have un-checked "Only if related to current tab"
#*##I have un-checked "Change opening order"
#*#I have checked "Open duplicated tabs next to original"
#*Click Events > Tab Focus
#*#If you ALWAYS want to stay on the current tab and let the new tabs open in the background, un-check everything. These selections will/should over-ride Tools > Options > Tabs, "When I open a link in a new tab, switch to it immediately"
See if the above changes give you the results you are seeking. Tab Mix Plus has lots of options. You may need to change one or two settings at a time until it behaves the way you desire. Keep track of the changes you make so that you can easily re-trace/re-set when the results are not what you want.

How can i determine which devices are used at the moment?

Hi all,
I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface. I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
Thanks,
Omer
Solved!
Go to Solution.

Hi Omer,
so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Mixed up settings?

Similar Messages

Maybe you are looking for