Modify maximum received message size - Exchange 2007
i'm modifying my organization recive size limits, it was configured so that the maximum recive size to 10MB, and i need to increase it to 20 MB, so i did the below steps
1. changed exchange organization transport config to 20M, and it's currently as below
[PS] C:\Windows\system32>Get-TransportConfig | fl *size*
MaxDumpsterSizePerStorageGroup : 18MB
MaxReceiveSize : 20MB
MaxSendSize : 7MB
2. edited all receive connectors settings in all servers so that the maximum receive size is 20MB as below
Get-ReceiveConnector | Set-ReceiveConnector -MaxMessageSize 20MB
3. for user limits, it's all using the default configuration for maximum receive size of unlimited
[PS] C:\Windows\system32>Get-Mailbox -Identity XXXXXXXXXXX | ft name,*maxre*
Name MaxReceiveSize
XXXXXXXXXXXXXXX unlimited
4. for adsite links, it's in the default configuration, and
MaxMessageSize : unlimited
for all AdSite links
but when i tried to send email from my gmail to my email account with attachment size around 13MB, i recived the below NDR
#550 5.2.3 RESOLVER.RST.SendSizeLimit; message too large for this sender ##
i checked the message size in the message traking log and found that the exchange server read it as 16MB size, (still under the maximum receive size) but its status was
fail routing due to message size
so i ask is there are any other settings that control the reciving message size, and how can i identify the source of restriction that prevents the server from accepting
the message
note: i restart the service
Microsoft Exchange Active Directory Topology Service and all its dependant services and replicates the active directory sites
You have to make the maxsendsize and maxreceivesize match for anonymous messages to and from the internet, so the the maxsend to 20MB as well ( to be clear - its really the maxsendlimit that is being applied to unauthenticated senders, so set it to 20MB
and make the maxreceive match and that is set the largest message size in the org across the board)
MaxReceiveSize : 20MB
MaxSendSize : 7MB
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Similar Messages
-
What is the default maximum email attachment size (Exchange 2003) on iPads?
What is the default maximum email attachment size (Exchange 2003) on iPads?
Maximum message size is determined by the mail server (Exchange in your case), not by the Mail app on your iPad. There are two settings in Exchange 2003 related to message size: One for incoming messages, one for outgoing. Both can be set to Unlimited, or to some number of kilobytes Exchange 2003 is a long time ago for me, but if I remember correctly the default size limit is 10240 KB (10 MB). Once those are set, the admin can also create policies to modify those limits for specific situations. You really need to ask your Exchange administrator how he/she has the max size configured.
-
Hello, and using Outlook 2007 and I need to set a max size message warning or blocking before send the email, Can I do this? do I need to modify the registry with a new key? thanks
note OS. is Windows 7.Hi
There is no maximum message size but there are some server and communication dependent consideration like memory,bandwidth etc -
Receive message for Exchange Account password?
Receive "password Incorrect" message "Exchange" account?
Try this to get the iPad to function again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
After the iPad boots up - try this for the password issue.
Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
Apple Mail can't send or receive messages from Exchange 2010, Mountain Lion
Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
0 CoreMessage 0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
1 CoreMessage 0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
2 Message 0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
3 Message 0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
4 Message 0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
5 CoreMessage 0x00007fff86a65b80 -[MonitoredOperation main] + 219
6 Foundation 0x00007fff92475926 -[__NSOperationInternal start] + 684
7 Foundation 0x00007fff9247d0f1 __block_global_6 + 129
8 libdispatch.dylib 0x00007fff87f4af01 _dispatch_call_block_and_release + 15
9 libdispatch.dylib 0x00007fff87f470b6 _dispatch_client_callout + 8
10 libdispatch.dylib 0x00007fff87f481fa _dispatch_worker_thread2 + 304
11 libsystem_c.dylib 0x00007fff9068ad0b _pthread_wqthread + 404
12 libsystem_c.dylib 0x00007fff906751d1 start_wqthread + 13Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
0 CoreMessage 0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
1 CoreMessage 0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
2 Message 0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
3 Message 0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
4 Message 0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
5 CoreMessage 0x00007fff86a65b80 -[MonitoredOperation main] + 219
6 Foundation 0x00007fff92475926 -[__NSOperationInternal start] + 684
7 Foundation 0x00007fff9247d0f1 __block_global_6 + 129
8 libdispatch.dylib 0x00007fff87f4af01 _dispatch_call_block_and_release + 15
9 libdispatch.dylib 0x00007fff87f470b6 _dispatch_client_callout + 8
10 libdispatch.dylib 0x00007fff87f481fa _dispatch_worker_thread2 + 304
11 libsystem_c.dylib 0x00007fff9068ad0b _pthread_wqthread + 404
12 libsystem_c.dylib 0x00007fff906751d1 start_wqthread + 13 -
Maximum encrypted message size
Hi all,
What is the largest size message that can be encrypted by the IronPort ESA PXE engine? Is this a configurable parameter?
Thanks very much,
- SteveI came to this thread after one of my users had a message bounce that was only about 7.2MB.
I understand Cisco wants to cut down on support calls and costs but this seems like a drastic reduction. We're a very small shop and rarely send out messages of any kind over 10MB but it's the big ones that are usually the most sensitive, yes? I would very much like to see this limit at least somewhat configurable in the future, even if it's capped at, say, 20MB, or even maybe see it indexed on throughput but effectively cutting the limit of what can be protected by 75% or more puts a huge dent in the value argument for IronPort. The ability to easily encrypt anything from any device is the prime reason we have IronPort versus numerous other options.
We renewed this year but if this is not addressed it will put a serious damper on our enthusiasm to spend the extra cash next year. -
Blackberry won't receive messages when Outlook 2007 is open
Ok guys, I was facing a problem of emails not getting delivered when Outlook 2007 was open. Did some online research and found following:
Black berry internet services no longer support POP3 access, refer here http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17407
Now, the only option is to enable IMAP in Google Apps/ Gmail. I configured my gmail using directions here: http://mail.google.com/support/bin/answer.py?answer=78882
and for Outlook 2007, I configured IMAP settings using directions here: http://mail.google.com/support/bin/answer.py?answer=77689
Finally, I am getting emails both on Blackberry as well as Outlook 2007, without any synchronization problems. Issue closed!
PS: No need to reply. Just posting for benefit of the community.Do a back up of your BBMessenger first (BBM > options > backup).
Delete BBMessenger from Options > Advanced > Applications.
Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
Now, download and reinstall BBM from www.blackberry.com/bbm using your BlackBerry browser.\
You might need to ask a member in each group to either re-invite you to the group, or delete you from and then re-invite you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
JMS Adapter Maximum Message Size Restriction and Impact
Hi ,
We have business requirements,where the Maximum message size that needs
to be sent or received from around 25 to 30MB usig JMS XI channels.
But, "Note 856346 - J2EE JMS Adapter: Frequently Asked Questions (FAQ)"
specifies as below,
2.12)What are the message size restrictions in 640/700 release and also
710 releases?
Answer: The maximum message size for 640/700 releases is "10MB"
Please let us know,
1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
regards,
Amit1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
10MB itself is the limit...anything above that wont be processed.
Regards,
Abhishek. -
Build Dynamic message footer in Exchange 2007
Hello,
Is there a way to modify all outgoing messages from Exchange server 2007 to include an Unsubscribe link that would have the outgoing message's subject and sender in the body?
Here's what I had in mind...
<a
href="mailto:yourlist@yourdomain?subject=Unsubscribe&body='Original Sender was ' + %%Sender%% ' and Subject was ' + %%Subject%%">Unsubscribe Me</a>
LukaszHi Joe,
We are also finding the same issue with getting that EXCDO error. The problem stemmed when users noticed some previously accepted appointments disappeared (As I suspect you discovered with your users).
The workaround has been to get the user to accept the appointment again by going into deleted items, this seems to add the appointment as it should have the first time.
We have done the following but it didn't fix the problem:
Disabled extra SEP features on the clients - No Change
Disabled non-essential Outlook add-ons - No Change
Removed BES Express and CDO MAPI From Exchange server - No Change
Disabled MS Defender on Exchange - No Change
Fixed any Public folder errors - No Change
Disable Window services WSS and UNC sharing feature in Active Sync - No Change
Also ensured Autoupdate and auto process was enabled for affected users - No Change
I'm going to try the reg change mentioned in this thread but other than the built in MS Defender we don't have anti-virus on our mail server.
At first we thought it was Active Sync as it only seem to impact those with a A/S device, but now it's intermittent for other users using Outlook. We are currently using Exchange 2007 SP3 with RU13. We are looking at trying an update
to RU14 but I am doubtful it will fix the problem. Did you have any luck finding a solution?
Thank you in Advance. -
Maximum message size JMS adapter can pick
Dear All,
I have query on JMS adapters.
1) I would like to know what is the maximum size message JMS adapter can pick?
2) Is there any option in JMS adapter, to define the maximum size?
You help/guidance will be very much appreciated.
Thanks,
Praveenkumar1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
10MB itself is the limit...anything above that wont be processed.
Regards,
Abhishek. -
Exchange 2007 SP3 Search Problems
I reset all the search indices on my mailbox databases. Event viewer has told me the crawl is complete and everything checks out when I do “test-exchangeSearch”
from PS. However, the index folders are considerably smaller than the original ones, (1.3GB vs 7GB) and only about 1% of database size. Multiple users can prove to me that searches are incomplete and not returning reliable results when just doing basic folder
searches from Outlook 2007. help!
IanAfter speaking with a senior MS Engineer, if you already have SP3 applied and tried to reinstall the search as I outlined above, you have corrupt your Exchange install and the ONLY option is to rebuild the box. After reinstalling Windows and Exchange, the
proper procedure to get search working perfectly is outlined below:
4. If you haven’t already,
upgrade toExchange Server 2007 Service Pack 3.
Exchange 2007 SP3 includes several major Search-related fixes and upgrades MSSearch 3.0 to MSSearch 3.1. This is a highly significant
upgrade.
5. Update to the latest available Rollup Update.
There are some very significant search fixes in the Rollup Updates for Exchange 2007 SP3. Some of these fixes are absolutely essential to install.
For example, Exchange 2007 SP3 Rollup Update 2 includes a fix that allows Exchange server to index emails even when the attachment cannot
be parsed – this is the number one call generator for Exchange 2007 search support cases.
To restate, upgrade to the very latest available Exchange 2007 SP3 rollup update, as there are many more search fixes available in the latest
rollup updates.
6.
Install IFilters and register them – follow ALL the steps below.
Install Filter Pack 1.0, which allows Exchange 2007 to index Office 2007 documents:
2007 Office System Converter: Microsoft Filter Pack
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=20109
7. Install the hotfix which addresses a known issue when search crawls a .vsd file.
960502 Description of the 2007 Office system hotfix package (Offfiltx.msp, Visfilter.msp): December 16, 2008
http://support.microsoft.com/default.aspx?scid=kb;EN-US;960502
Additional Information on the hotfix:
960166 Error message when a search process crawls a .vsd file on a Windows 64-bit operating system that is running the 2007 Office Filter
Pack: "The filtering process has been terminated"
http://support.microsoft.com/default.aspx?scid=kb;EN-US;960166
8.
Register the Filter Pack 1.0 IFilters. This is a manual process with Exchange 2007 but we have created a script to automate the process.:
944516 How to register Filter Pack IFilters with Exchange Server 2007
http://support.microsoft.com/default.aspx?scid=kb;EN-US;944516
9. Install Filter Pack 2.0 which allows Exchange to index Office 2010 attachments as well as some additional file types.
Download details: Microsoft Office 2010 Filter Packs
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5CD4DCD7-D3E6-4970-875E-ABA93459FBEE&displaylang=en
10. Register IFilters 2.0 with Exchange 2007.
How to Register IFilters 2.0 with Exchange 2007 and Exchange 2010
http://technet.microsoft.com/en-us/library/ff354976(EXCHG.80).aspx
11. Disable signature verification for the Exchange 2007 search services by putting 127.0.0.1 crl.microsoft.com in the HOSTS file.
Certificate Revocation List
When the Microsoft .NET Framework 2.0 loads a managed assembly, the managed assembly calls the CryptoAPI function to verify the Authenticode signature
on the assembly files. The CryptoAPI function checks a Certificate Revocation List
(CRL) that is available at http://crl.microsoft.com
. This action requires an Internet connection.
The
Microsoft Search Indexer service (Microsoft.Exchange.Search.ExSearch.exe)
is a managed assembly that is loaded by Microsoft .NET Framework 2.0. After installing Exchange 2007 SP3, if the Exchange server or DNS cannot resolve
http://crl.microsoft.com for any reason
the outgoing HTTP requests may be dropped and an error message is not returned. This delay causes the CRL to time out and cached CRLs will expire. This affects the Microsoft Search Indexer service in such a way that any new email fails to be indexed.
Instructions to Modify HOSTS file on the Exchange 2007 Server
Add the following:
127.0.0.1 crl.microsoft.com – here are the instructions:
a. Go Start – Programs and choose Command Prompt and choose Run as Administrator.
b. Within the Command Prompt, change to this directory (the drive will be the one where you installed the OS):
C:\Windows\System32\drivers\etc\hosts
c. Add the following entry to the HOSTS file:
127.0.0.1 crl.microsoft.com
d. Save the HOSTS file.
13.
Rebuild Indexes
using ResetSearchIndexes.ps1
How to Rebuild the Full-Text Index Catalog
http://technet.microsoft.com/en-us/library/aa995966(EXCHG.80).aspx
a. Go Start – Programs and choose Exchange Management Shell and choose Run as Administrator.
b. Change to this directory (the drive will be the one where you installed Exchange 2007):
C:\Program Files\Microsoft\Exchange Server\Scripts
c. It is suggested that you rebuild indexes for one or a few databases at a time – use the following command to rebuild the indexes for 1
databases called dbname1 and dbname2:
.\ResetSearchIndex.ps1 –force dbname1 dbname2
d. It is suggested not to run the following command unless you have 1 Exchange 2007 server only in your environment because it will cause
all databases on all Exchange 2007 (and all Exchange 2010 servers, if there are any) to be reindexed at that same time:
.\ResetSearchIndex.ps1 –force all
14.
Monitor the Application Event Log for Event ID 110 for a particular database.
This will indicate the new index is complete for that database.
15. After receiving Event ID 110 for a database, check to see if the size of the CatalogData folder for that database is the expected
5% to 10% of the database size. If the size of the CatalogData folder is significantly smaller than that or if the size is a few kb or a few mb, go
to Step 17.
16. After you have received Event ID 110 and the size of the CatalogData folder is normal, test searching in Outlook online mode
and OWA to make sure search is working.
<strike>
</strike>
Ian -
Cannot Connect to Microsoft Exchange 2007
Hello everyone,
I'm sure this question has been answered somewhere on here already but I can't seem to find it. I am trying to connect to my school employee e-mail which is on Microsoft Exchange 2007. In the mail setup wizard I have Exchange 2007 selected as account type, for my incoming server name I put owa.school.edu, my username and password and it will not connect, giving me the following error message:
The Exchange 2007 server "owa.school.edu" is not responding. Try checking the network connection, and that the server name is correct. Otherwise the server might be temporarily unavailable. If you continue, you might not be able to receive messages.
Now I've used this same information on my iPhone and iPad and haven't had a problem synching with those decices. Why will this not work with the mail app on my MacBook? It may also be helpful to note I am running version 10.6.8 of Mac OS X.What is really weird from Apple is that the Iphone is connecting to exchange without wondering wether it's an exchange 2003 or 2007, but Mail does....
I connected my Iphone in a matter of minutes, but I just realized that it is a 2003 exchange server that I'm connected with.
So I asked my Admin wether I can connect thru IMAP.
Gilles -
How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007
Hello,
I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.
I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
How can implement this for this sending outgoing faxes as well?
I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server.
Any help is appreciated. Thanks!Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
The article is so easy to understand with detail procedure and guideliness
Exchange Queries -
Exchange 2007 and 2013 coexistance Problem
We are in the process to migrate our current Exchange 2007 to Exchange 2013.
Our environment is as follows:
HT01= Hub CAS Server (Exchange 2007)
MB1, MB2 = Mailbox CCR Cluster (Exchange 2007)
CAS1= CAS Server (Exchange 2013)
MBNew1, MBNew2 = Mailbox Servers (Exchange 2013)
Emails for users that are on Exchange 2007 can send and receive external emails. But they cannot send emails to users that are on Exchange 2013.
Users on Exchange 2013 can send/receive externally, send to Exchange 2007 users, but cannot receive emails from Exchange 2007 Users.Are you getting any NDR? Post it.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Hi,
My exchange servers are hosted with my hosting service provider at London, i have 1000 users and each are having 3 Gig mail box size (exchange 2007) and this exchange server is part of our company network which is extended to hosting service provider. I
need to setup new exchange 2007 as part of existing exchange organisation and migrate the users from London to Singapore.
The bandwidth between our company and hosting facility 20 MB.
What is the best method to move the mailboxes from loon service provide to our company ?
I cannot do complete 3 gig mailbox migration from source to destination due to wan bandwidth limitation and time.
I can do only move the mails to local pst then migrate the mailboxes to new server and import the pst mails to exchange mailbox.
Is there any other method available ? backup and restoration ?
Please help me to provide best method for mailbox migration.For migrating exchange mailboxes from one server to another server (across the country), the suitable approach will be to export mailboxes into pst files.
This job can be simplified even more, take the offline copy of edb file to the destination system (at Singapore) then export all mailboxes (of all sizes) from offline file to separate PST files. Then run PowerShell scripts to import the PSTs. For extracting
mailboxes from offline edb file use a stable edb converter solution that extracts mailboxes (even very large sized) & create new pst file for each of equivalent size.
product overview: http://www.pcvita.com/edb-converter.html
Maybe you are looking for
-
Hi. When sap bo 2004 tries to load my add-on, it shows the error: " Run-time error '429' -ActiveX component can't create object " I think that it's because in the vb6 project I've added a reference to Microsoft XML v5.0, to manipulate .xml archieves.
-
i updated my ipod touch to ios.5 and my music is gone but on my computer . how do i get it back on?
-
Date comparison behaves differently in deployment
Hi All I needed to compare dates entered by the user when selected thru an lov or inputed. So I went about converting the string dates in its screen related format(dd/MM/yyyy) to comparable oracl date format(yyyy-MM-dd). I'm not sure why I went for y
-
Bulk URL Monitoring is SCOM 2012 SP1
Hey Team, i need to setup 100 + url monitors in scom 2012 sp1, i came across a term named BULK URL Monitor which suits my requirement. The issue is i am failing to get it to work when i click Bulkmonitor.exe i am gettign the below error and not sure
-
PleaSE HELP! Ibook G4 won't start up!
Hi, I am a stay at home mom and my husband is a total mac geek, but I am ready to kill him right now. He has always taken care of any probs etc, but a few weeks ago my ibook g4 was left on, shut though so it was sleeping for a few days while I was aw