Mon0 error in airmon-ng on Dell Inspiron 6000 w/ Intel 2200BG wireless

I'm testing my home network's security, and no matter what I try,
sudo airmon-ng start wlp3s3
returns
Found 2 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!
PID Name
2619 wpa_supplicant
2697 dhcpcd
Process with PID 2619 (wpa_supplicant) is running on interface wlp3s3
Process with PID 2697 (dhcpcd) is running on interface wlp3s3
Interface Chipset Driver
wlp3s3 Intel 2200BG ipw2200 - [phy0]
(monitor mode enabled on mon0)
mon0: ERROR while getting interface flags: No such device
iwconfig outputs
lo no wireless extensions.
eth0 no wireless extensions.
wlp3s3 IEEE 802.11abg ESSID:"wilrout"
Mode:Managed Frequency:2.457 GHz Access Point: 00:18:E7:E2:D4:72
Bit Rate:48 Mb/s Tx-Power=20 dBm Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=72/100 Signal level=-56 dBm Noise level=-88 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:9

Not all wireless cards can handle packet injection, which will be needed when using the aircrack-ng suite.
Two things stand out:
It appears that you are using your internal wireless card,(Intel 2200BG chipset) which may not support packet injection. Some chipsets won't work at all, some can be patched.
Simple fix: grab a wireless card (usb) from ebay that is known to work. My favorite is the netgear WG111v2, about $10.00 U.S.
It seems you are connected to the internet:
wlp3s3 IEEE 802.11abg ESSID:"wilrout"
Mode:Managed Frequency:2.457 GHz Access Point: 00:18:E7:E2:D4:72
You don't want to be connected for this.
The best place to start for you would be http://www.aircrack-ng.org/documentation.html
You can check your chipset and find any patches you may need, as well as follow their tutorials.
You tube also has a lot of video tutorials.
Good luck.
Edit: this may be of interest, note the "mon0: ERROR while getting interface flags: No such device" errors.
http://www.backtrack-linux.org/forums/s … hp?t=41677
Last edited by rfk1ll (2013-02-17 07:24:10)

Similar Messages

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Problem connecting Dell Inspiron 6000 to internet via Time Capsule.

Hi,
Unable to connect Dell Inspiron 6000 to internet via Time Capsule.
I get this "Windows is unable to connect to selected network. Network may no longer be in range". Any clue?
Thanks.

What modem do you have?
Is it a router? What mode is the TC being setup in, bridge or router?
Is it cable modem? If so did you power cycle the modem for the required time.. it might be 30min or just 5min or many hours depending on the ISP.
Tell us more.
For mavericks please ensure your network connections have ipv6 set correctly.. ie link-local.

ITunes and QuickTime Installation on Dell Inspiron 6000

I've done the 5 R's suggested by apple, with no luck.
After installing itunes, and precceding to the quicktime
installation, my laptop crashes to a blue screen of death.
After my laptop reboots, itunes refuses to open.
I've removed every entry from the regestry, and from windows. The blue screen gives a 00000008v exception error.
Can onyone help?

After installing itunes, and precceding to the quicktime
installation, my laptop crashes to a blue screen of death.
what are the precise numerical and text codes that you're getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)

IMac display with Dell Inspiron

I've searched and could not locate the answer to this. My "new" wife has brought a Dell Inspiron 6000 into the family. Not being a windows user - EVER I am looking to see if I can connec the dell to my iMac duo 20" to extend the display. Any suggestions? Thanks. Kevin

I guess that's a Dell laptop...?
And I hope you mean to use the Dell as the second display, not the other way around.
Here's a clever application that uses the open source VNC protocol in a creative way.
http://www.screenrecycler.com/home.html
I makes any computer that can run a VNC client into a second display. The Screen Recycler program basically creates a virtual display and acts as the VNC server of that display. Any computer on the network running a VNC client can share that virtual screen. Make it run at +full screen+ mode and it looks like a regular secondary display. You can arrange it just like any display in System Preferences Displays pane.
I use it myself with an old PC laptop running Ubuntu Linux. Since I already have a real external display on my iMac, the Screen Recycler display is the THIRD display on my iMac.
The main drawback is speed. It is going over a network. For best results, use a wired connection at 100BaseT or better. But even a gigabit speeds, it won't refresh as fast as a display connected directly to a video port. But it works well for static windows. I keep my Mail window open on it at all times. Also, it IS a separate computer, so it won't automatically sleep when you sleep your Mac.

Problems hooking up Inspiron 6000 with Router WRT54GS

We have a WRT54GS that has been set up and working wonderfully. My son just came home from college with his laptop (Dell Inspiron 6000 with wireless card, etc) and I wanted to hook it up also.
I think I'm missing a setting somewhere because, although I've entered the MAC into the router MAC filter list and the laptop shows our network name, I cannot get the laptop to connect. I get the prompt for our password, enter it, and then it just can't connect. Any suggestions as to what I've done wrong or what should I be checking? I've spent far too much time on this today.

It sounds like you have a wired computer connected to the router and that this computer is able to access the Internet without any problems. Is this correct? If so, then your basic router setup is complete. But it also sounds like you have never connected a computer wirelessly to this router. Is this correct? Normally, wireless would be turned on by default. So the only settings that you normally need to change are the wireless security settings.
You mentioned that you were using MAC address filtering. On the same page where you "Enable" wireless MAC address filtering, make sure you have marked the option "Permit only PC's listed .....". Then enter the MAC address of your son's laptop in the "MAC Address Filter List". Be sure to click on "Save Settings" on both of these pages, and wait for the page to refresh (3 to 60 seconds).
Have you checked to see if your son has the Intel Pro Wireless 2200bg card? You can check this in "Device Manager", under the heading of "Network Adapters".

Dell Inspiron 7537 - Resume from sleep causes various dmesg errors

Hi,
I'm getting various acpi and intel video driver errors upon resume from sleep. The system does come up and I haven't found any functional problems that this is causing. I think the acpi errors may just be causing some devices to drain more power than is necessary. I have tried various live CD's from Ubuntu, Sabayon, and Fedora and they all have these same symptoms. Can anyone help with this, particularly anyone with the same laptop model who may have fixed these issues?
Thanks,
D
[ 1766.046497] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1766.046649] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1766.046650] acpi INT33C2:00: Cannot transition to non-D0 state from D3
[ 1766.046651] acpi SYNA2393:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1766.046652] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown)
[ 1766.046654] acpi INT33C3:00: Cannot transition to non-D0 state from D3
[ 1766.046655] acpi INT33C0:00: Cannot transition to non-D0 state from D3
[ 1766.046656] acpi INT33C1:00: Cannot transition to non-D0 state from D3
[ 1766.046657] acpi INT33C4:00: Cannot transition to non-D0 state from D3
[ 1766.046658] acpi INT33C5:00: Cannot transition to non-D0 state from D3
[ 1766.046671] acpi device:28: Cannot transition to power state D3cold for parent in (unknown)
[ 1766.046672] acpi INT33C6:00: Cannot transition to non-D0 state from D3

I also bought a Dell Inspiron 15 7537 and I had the same problem as OP, but on Fedora 21 64-bit with Gnome 3.14. I haven't tried any other distros or DEs. However, both Arch and Fedora run systemd, so I think my solution work the same on both systems. I fixed it by doing the following steps:
1. Create a script that reloads the kernel module hid_multitouch.
$ sudo mkdir /opt/touchscreen-fix
$ cd /opt/touchscreen-fix
$ echo '#!/bin/sh
/sbin/rmmod hid_multitouch && /sbin/modprobe hid_multitouch' | sudo tee resume.sh
$ sudo chmod +x resume.sh
Executing this script after a resume will make the touchscreen work again. However, it will of course not run automatically after a resume.
2. Schedule the script to run after resume.
Create the systemd service file:
$ echo '[Unit]
Description=Fix touchscreen after resume
After=suspend.target
[Service]
Type=simple
ExecStart=/opt/touchscreen-fix/resume.sh
[Install]
WantedBy=suspend.target' | sudo tee /etc/systemd/system/touchscreen-fix.service
Enable it:
$ sudo systemctl daemon-reload
$ sudo systemctl enable touchscreen-fix
Done! And that's all! I'm not sure if you also might need to restart the computer for it to work.
To accomplish this I used the following resources:
https://wiki.archlinux.org/index.php/Po … leep_hooks
http://unix.stackexchange.com/questions … -at-resume
https://bugs.launchpad.net/ubuntu/+sour … omments/28
Last edited by MaTachi (2014-12-16 13:35:21)

Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

Hi,
I have tried installing "Dell Wireless 1701
802.11 b/g/n, Bluetooth v3.0+HS Driver "
But I saw neither wireless nor Bluetooth was defined.
As the drivers listed below are only the driver for wireless and bluetooth, I almost tried all of them, except the last three.
File TitleImportanceRelease DateVersionActions
Intel Centrino Wireless-N 1030 WiFi Driver
(Driver)
Other Formats
Description
Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
Intel Centrino Wireless-N 1030/Advanced-N 6230
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
Driver
(Driver)
Description
This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
Dell Wireless 1702 WiFi + Bluetooth Driver
(Driver)
s
Description
This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
Intel Centrino Wireless-N 1000, Centrino Advanced-N
6230, Centrino Wireless-N 1030, v.14.2.0.10, A01
(Driver)
Recommended
Description
This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
Intel Centrino Advanced-N 6230/Wireless-N 1030
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Add to My Download List
Dell Wireless WLAN 1502 Half Mini-Card Driver
(Driver)
Description
This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
Intel WiMax Link 6150 Driver
(Driver)
Description
This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
Ethernet Controller Driver
(Driver)
Description
This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
I had to install Dell Wireless 1702 WiFi +
Bluetooth Driver
The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
well, although there was a folder added in documents folder named 'Bluetooth Folder'
Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
still not working will.
The sceen shot shows the device manger before installing Dell
Wireless 1702 WiFi + Bluetooth Driver
These screen shots shows the device manger after installing Dell
Wireless 1702 WiFi + Bluetooth Driver
I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating program of this device is up to date. As this screenshot shows.
What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
Also, I have tried to install Intel
Centrino Wireless-N 1030 WiFi Driver
But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
means, is it because Dell Wireless 1702 WiFi +
Bluetooth Driver is being installed
Could you please take some of your preciout time out to read carefully my points below to finish this problem?
first:
Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
I don't have any other drviers which can do more than the what Dell
Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen). the bluetooth was added for both laptops as you see in these screenshots below:
The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
The Bluetooth devices of Mohammad's laptop whosse Bluetooh is defined well in device manager.
But there is still problem in the device managre as shown in the screenshot listed before.
Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
below), I can show what is inside it.
However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot:
Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below) However,
the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
But which driver should I reinstall because I have already installed the Dell
Wireless 1702 WiFi + Bluetooth Driver almost twice?
A man should convert his anger and sadness into strength to continue living in this life.

Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
Therefore, you are seeing the error.
If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
Balaji Kundalam
Thanks a lot,
I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
The Bluetooth is integrated with
the laptop, then where other services will come from, all service are related to Bluetooth.
If there are some additional services not related to Bluetooth,
then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
on the name of my laptop in the Device and printers.
Also, I really have installed a
BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
but when trying to install the same
BCBT7(Broadcom Bluetooth) on Dell, I faced the error below, although there is an icon for Bluetooth in
the system tray. Also, the Bluetooth is integrated as
you have seen in the device manager.
You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
Bluetooth is having some problems in the device manager.(First Screen shot below) However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
A man should convert his anger and sadness into strength to continue living in this life.

Dell Inspiron 11 3000 series

I have an acer aspire one that has been trucking along for nearly 6 years now with almost continuous use (about a year of non-use time in there, but that's it). I use it primarily for taking notes in class and such, but it also sees a lot of programming and other use since I take it to campus each day and also on trips. In this time, I have lost almost all the feet and now screws are slowly disappearing. It also has started to have some overheating issues when the heatsink seems to shift positions slightly (it shuts off within 90 seconds when this happens). In addition, I find myself wishing quite often that it could do things like stream video properly (without jittering) and compile the kernel (it takes FOREVER on that tiny hyper threaded single core atom processor). So, I've been looking at a replacement that can get similar battery life, has a similarly sized screen (preferably touch as well because I think that would be great fun to use), more than 1Gb of RAM (I can have about 7 tabs open on chrome and then it starts having troubles since I have swap disabled), and a better processor. My most basic requirement, however, is that the laptop be able to run arch.
I've been looking at the Dell Inspiron 11 3000 series since it seems to have the best battery life of my various 11.6" options out there. The processor is a dual core Celeron which sounds old and antiquated to me, even though I believe its based on Haswell (not sure there). It also has 4Gb RAM and 500Gb hard drive. Another option, for $50 more, is a pentium processor which sounds even more antiquated, but is still based on Haswell.
http://www.dell.com/us/p/inspiron-11-31 … redir=true
My question is this: Has anyone managed to get arch working on one of these things? I also imagine that the most new-fangled component would be the touchscreen, so does anyone know the general support of those for linux?
Thanks in advance for any help.

Hi,
Does the WPF application develop by yourself? Please make sure that your application has no dependency issue, if your WPF application lacks of some libs or .Net framework, it cannot execute. Do you get any error message when you try to run it?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing Issues with HP PSC 750 on Dell Inspiron 3647 using Windows 8.1

Recently purchased a Dell Inspiron 3647 desktop which has Windows 8.1 unable to get my HP PSC 750 to print correctly.
I have downloaded all applicable Win 8.0 drivers and even tried using the HP print & Scan Doctor application. I get partial test pages printed, but the emails, documents, etc. are not complete.
I had one error pop up stating that the USB 2.0 may not work with the 3.0 on the computer, but never how to 'work around that issue'.
I tried calling HP support and they wanted to 'remote' into my computer as that was the only way they said the issue could be fixed...never done that before and was not comfortable with it...
Any other ideas - before I go out and buy a brand new printer (this one by the way still works great!)
Thanks in advance!

Hi there and welcome to the forums
I saw your post about trying to install and use your PSC 750 on your new Windows 8.1 system. After checking the drivers out for this printer, I have discovered that there is no driver available for Windows 8.1. Perhaps try running the HP Print and Scan Doctor to see if that will help with printing. If not, I would then suggest looking into an upgraded printer which will have more up to date software and would most likely function with 8.1.
HP PSC 750 All-in-One Printer Drivers
If you were to call HP, they may have a trade in option for you, if you're interested, I will include their contact info.
If you're calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
I hope you found this information helpful!
Enjoy the rest of your Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Solaris 8 on intel(Dell Inspiron 4150)

I am trying to install Solaris 8 on my Laptop (Dell Inspiron 4150), but it is getting terminated stating "No dump device, continue to reboot".
Can anybody tell me if it is possible to install Solaris 8 or 9 on Dell Inspiron 4150.
How do I check the HCL?
Jitendra

http://laptops.solaris-x86.org lists a Dell Inspion 4100. I assume the
Inspiron 4100 and 4150 are build with similar hardware.
You should probably try to collect some information about the cause
of the kernel panic first, by booting with "kadb -v". Boot from the
"Software 1 of 2" CD, and at the "1 interactive or 2 custom jump start"
propmt, type
b kadb -v
The system will panic one again, but this time you can print a stack
backtrace, using the kadb "$c" command.
Report what error messages are printed now.
Does it panic due to a NULL pointer access, and is there a subroutine
"elxl_send" visible on the stack backtrace?
The entry in the laptop list indicates that you need a special version
of the "elxl" driver for the 3com network card. The standard Solaris 8 elxl
driver is known to panic the kernel with certain variants of the 3com
3c905 cards.
In this case you should try to install solaris with the NIC disabled in
the BIOS, install Solaris, install the updated elxl driver mentioned in thttp://laptops.solaris-x86.org and finally manually configure the NIC.

Problem facing installing Solaris 10 on Dell inspiron 6400.

Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
Saurabh

Hi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
     No Solaris Driver
     Multimedia
     Intel Corporation
     82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
     No Solaris Driver
     Network
     Intel Corporation
     PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
     Solaris 10 11/06
     Firewire
     Ricoh Co Ltd
     Unknown device
     hci1394
Note-1
     Note-1
     Network
     Broadcom Corporation
     BCM4401-B0 100Base-TX
     bfe
Solaris 10 11/06
     Solaris 10 11/06
     Video
     Intel Corporation
     Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
     vgatext
Solaris 10 11/06
     Solaris 10 11/06
     Storage
     Intel Corporation
     82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
     pci-ide
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #1
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #2
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #3
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #4
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB2 EHCI Controller
     ehci

DELL Inspiron N5110 does not Shut Down and does not wake up from Sleep

Hello.
I have Dell Inspiron N5110 which cannot shut down neither in Windows 7 nor in Ubuntu Linux. I specifically booted Ubuntu Live from the CD to eliminate the possibility that the problem is in the Windows 7. Shutdown in Ubuntu does not work either. This proves that the reason in not a BACKGROUND application in Windows that remains hanging and does not allow the laptop to shut down.
The laptop cannot wake up after Sleep or Hibernate either.
I have tried every solution that you advised to all the other people in the forum that have the same issue.
1. The laptop cannot shut down in Safe Mode either.
2. It cannot shut down even after Clean Boot Mode - all non-MS services disabled and all Startups disabled.
3. I tried changing the Advanced Power Options of "Allow Hybrid Sleep" - both ON for "On AC Power" and "Running on battery" - no change.
4. I tried installing the latest video drivers for Nvidia. This did not help either.
5. Running only on battery does not change anything - still cannot shutdown.
6. Running only on AC adapter without battery - still cannot shutdown.
7. I tried removing the AC adapter and battery and holding the POWER button for 30 seconds to RESET the laptop - did not work.
ATTENTION: I've been reading your forums all day and saw at least 10-15 reports of the same problem and not a single fixed case.
8. This is why I have not tried Flashing the BIOS to the latest version - I read other people tried that and it didn't work either.
9. I loaded BIOS default settings (F9) - still cannot shutdown.
REMARK: Changing something in the BIOS and trying to Exit once caused the laptop to freeze and I had to Power Off by holding the button for longer.
10. I ran DELL Diagnostics from Boot menu (F12 at startup) - no errors found.
11. I could not locate IEEE 1394 Adapter in Device Manager to change its Power Management settings.
Actually none of the suggestions you may give for changing something in Windows makes sense because I already mentioned that shut down in Ubuntu does not work either.
The issue seems to be either in the BIOS or a hardware problem. But which component? Is it the CD/DVD drive?
This is a new laptop.
Please advice how to proceed. If you know which component fails please tell me.

Remove the keyboard and palm rest (guide from dell shows you how) and you should see a small coin cell battery. Remove it for at least 10 seconds, then put it back in. Enter BIOS and make sure there isn't anything weird that was changed. It should work properly now. I have had this working in Ubuntu 12.04 for the last few days, with no problems.

I need help installing iTunes on my new Dell Inspiron with Windows 7.

When I attempt to install iTunes (downloading from the iTunes website) on my new Dell Inspiron with Windows 7, I get the following error message, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
Please help. Thank you.

Have you tried to install other programmes on the same PC? If they have worked, your installer should be in working order, so redownload iTunes and try again

Mon0 error in airmon-ng on Dell Inspiron 6000 w/ Intel 2200BG wireless

Similar Messages

Maybe you are looking for