Monitor & capture incoming request.

Could you anyone guide me how to capture no. of incoming request in weblogic?
I am performaning a load test on a web service and it seem that some request is queued and wait for process.
how could monitor this?
in addition, is it possible log/capture the request serialization between its enter into web service?
For example,
1. i have a uploadFile(byte[] file) web service.
2. binary file from client will then translate from binary into base64string.
3. the base64string will then be translated into the byte[] in server side. <---how could capture this time?

you can get the server's incoming request by running following WLST,
Run the ". ./setWLSEnv.sh" or set the classpath manually....
java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic1 GET -pretty -type ServerRuntime
note: change the hostname, username and password based on your configuration.
you will get different run time metrics, an your needy metric will be available in
OpenSocketsCurrentCount: 1
SocketsOpenedTotalCount: 1:
Other than that, you can get this same metrics with help JMX (Java management Extenstion).
http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e13951/core/index.html
select runtime mbean , choose ServerRuntimeMBean , but you need to write JMX code to connect with weblogic server.
Edited by: Jose on Aug 10, 2010 7:38 PM

Similar Messages

Could you anyone guide me how to capture no. of incoming request in weblogi

Could you anyone guide me how to capture no. of incoming request in weblogic?

Use a tool like webalilzer to process and graph the access logs. It wont be in real time, but you can certainly track accesses to your site.
TGF

Capturing Incoming Keystrokes

Hello,
I want to capture incoming keystrokes and prevent them from being passed to the current application. I need to identify the keystroke (i.e. an "a", a "b", etc.) and pass that information to an AppleScript Studio application that runs in the background. To pass the information to the AppleScript Studio application, I can use the command osascript to run an AppleScript that interacts with my Studio application. I just don't know how to catch the keystroke before it goes to the current application.
I am comfortable programming in AppleScript, and I am currently learning Python. I would very much appreciate any advice, or even a point in the right direction.
Thanks,
Carl

Hi Ajay,
Michael's response is spot on [1]; and you might take a look at this
example of how to create a handler [2].
Hope this helps,
Bruce
[1]
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=5141
[2]
http://webservice.bea.com/log.zip
Ajay wrote:
>
Hi All,
I have managed to publish one of my session beans as a Webservice. Im using ant
to build the application and the same is bundled as an EAR and deployed. I need
to capute the incoming XML request in my session bean and dump it in my file system.
Can any one please tell me how i can achieve this?.
thanx
-Ajay

Monitor Capture for IPv6

Trying to capture IPv6 BGP hello traffic with monitor capture feature without success.
With the monitor capture for IPv6 traffic active and running; If I traceroute (IPv6) from this same router I do see the IPv6 traceroute traffic but NEVER IPv6 BGP hellos.
NOTE:
IPv6 traceroute traffic is not shown in the below output because I already cleared the V6BUFF buffer before running the show command.
My setup:
monitor capture buffer V6BUFF size 512 max-size 128 linear
monitor capture point ipv6 cef V6PT mfr0.1 both
monitor capture point associate V6PT V6BUFF
monitor capture point start V6PT
Troubleshooting
After disassociating monitor capture point V4PT here are the results:
1941-WAN3#sh mon cap buff all par
Capture buffer V6BUFF (linear buffer)
Buffer Size : 524288 bytes, Max Element Size : 128 bytes, Packets : 0
Allow-nth-pak : 0, Duration : 0 (seconds), Max packets : 0, pps : 0
Associated Capture Points:
Name : V6PT, Status : Active
Configuration:
monitor capture buffer V6BUFF size 512 max-size 128 linear
monitor capture point associate V6PT V6BUFF
Capture buffer V4BUFF (linear buffer)
Buffer Size : 524288 bytes, Max Element Size : 128 bytes, Packets : 125
Allow-nth-pak : 0, Duration : 0 (seconds), Max packets : 0, pps : 0
Associated Capture Points:
Name : V4PT, Status : Inactive <--- I already disassociated this one
Configuration:
monitor capture buffer V4BUFF size 512 max-size 128 linear
monitor capture point associate V4PT V4BUFF
Regards
Frank

What was the issue and how did you solve it?
-Deepak

Unable to find a Routing corresponding to the incoming request message.

I have faced some issues regarding integration between peoplesoft 9 [peopletools 8.48] and Oracle Fusion Middleware using BPEL.
the error log shows the error
Exception : PeopleSoftServiceListeningConnector: GeneralFrameworkException
Default Message : Unable to find a Routing corresponding to the incoming request message.
stack trace : com.peoplesoft.pt.integrationgateway.common.GeneralFrameworkException
at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftServiceListeningConnector.service
Please help me out in this issue.
I have searched forums and Some of them told that if external service operation and message name are not matching then this kind of error occurs.i have changed the alias name in routings>parameter page to my message name. But still it is not working.
Thanks and advance,
Nirav

Thanks.
I hv used the userid PS in the node definition page of the anonymous node. Because previously I was getting the error that "Username is not defined in the database."
What you mean is
1) Should I removed the userid PS from the node definition page of the anonymous node ?
2) The external Alias name in the routing parameter page is the same as the component interface and version v1 is added there as a suffix. I hv changed the external Alias name to my request and response message name. Am i doing right ? If I'm doing wrong then what should be the external alias name.
Thanks,
Nirav

Where do you capture Change Requests? I'd like to jump ahead 15 minutes or more in a FF

With my DirecTV DV, I could jump 15 minute or greater increments with FF through a show or game. I've read others posting about not being able to do this too. Is there a future features list maintained anywhere? Where do you capture changes requests and allocate them towards releases? Is this a feature we will get anytime soon?

You can set skip to be up to 5 minutes.
There is also chaptering that you can use for a show that has completed recording.
Start playback. Hit the up arrow key and you can jump ahead in the program.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How we can monitor while import request in production system?

dear friends,
will you please explain me
how we can monitor while import request in production system?
and
what are the things we have to monitor during the transport?
thanks
regards
zaheer

Hello Zaheer ,
I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
Check with
tp -v
R3trans -v
if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
During the import, it is important to check the contents of the directories
usr/sap/trans/tmp
and
usr/sap/trans/log
that they are being continously updated which shows import is progressing.
Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
Best regards,
Paul

How 2 capture the request in background

Hi,
how 2 capture the request in background
Thanks

Hi,
My question is ,
while creating any object we generally assign that to particular request .
I have one object XXXX . I want to find which request is assigned to this object . i want to know.
Thanks

4500X command parser bug for monitor capture

I have had a question about wireshark support on the 4500X switches. I thought there were some capabilities missing from my 4500X-24 running 3.5.2E but as I was entering my question here I realized what the problem is. I thought capabilities were missing because the question mark doesn't doesn't display all the options:
Switch#show monitor capture ?
file Display captured file
Switch#show monitor capture mycap ?
% Unrecognized command
But it just seems to be a parser bug because it does actually accept and execute commands as documented:
Switch#show monitor capture mycap parameter
monitor capture mycap interface Vlan11 both
monitor capture mycap interface TenGigabitEthernet1/1/7 in
monitor capture mycap match ipv4 any any
monitor capture mycap file location bootflash:mycap.pcap buffer-size 1
monitor capture mycap limit packets 100 duration 60
I just thought I would pass this along.
-Jeff

What was the issue and how did you solve it?
-Deepak

Request without Monitor Log: APO Request or Terminated Request Generation

Hi,
While loading data to ODS from the sources system there is new error request appearing in the ODS with following description:
Request without Monitor Log: APO Request or Terminated Request Generation
Unable to see the error details as this request is not appearing in the monitor, unable to delete the request from the ODS and the error message is below.
Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed RSMPC 060
Deletion of request REQU_435CYSN3FS0USQJXVKQOLAZ65 from data target ZRORDITM failed RSMPC 060
Any thoughts on above issue are helpful.
Thanks
Kumar

My thoughts on this...
This problem might be caused by a program error.
DataStore objects allow you to check or generate master data ID (SID) values during the activation. If you choose to do this, the parallel processes may terminate.
<b>The following prerequisites must apply:-</b>
You activate the DataStore object data in parallel (see transaction RSODSO_SETTINGS).
During the activation, SID values are checked or generated (option "Generation of SID Values" is set).
The generated programs of the InfoObjects of the DataStore objects are not current at the start of the activation (in particular, after metadata changes).
Note 978772 - P10: Parallel SID generation terminates with deadlock
Hope it Helps
Chetan
@CP..

Managing Request without Monitor Log: APO Request or Terminated Request Gen

Hello Everyone,
Need some help of managing a system created DTP named Request without Monitor Log: APO Request or Terminated Request Generation. This is like a staging DTP provided by SAP to support data loads to DSO or Cube and, it's good if the process goes smoothly.
However when we encountered unnecessary error such as tables space or memory problem, this particular job will get stuck and there's no way to move forward or backwards from this point. There were some answers to delete the request from RSICCONT, but I don't see the direct relations here, or maybe I'm wrong.
My only question - Have anyone any idea on how to work around this.
The last thing I've in hand is to delete the whole thing (requests) and re-do from start (extraction). Not a pleasant thing as this DSO feeds to 2 Cube & 1 DSO and then to another Cube.
Thanking everyone in advance.
Regards,
Azmadi

Hi,
sad to knw you had to delete the whole data and reload. I faced the same issue today and here is what i did,
when you go to the reconstruction tab, you will find 2 ticks present
1st one that tells if request is available in data target and
2nd which gives the transfer structure status.
Now, if the first check is crossed it could mean 2 things....data no longer exists in data target or data was not updated to data target these are 2 different things.
So, in your case it wud have sed data was not updated to the target.
Solution, just reconstruct that request and then in the request tab mark it red and delete again since you dont need it.... then the activation through process chain will not fail.

Requests without Monitor Log: APO Request or Terminated Request Generation

Hello all,
Can you please help me in the following issue:
I had in an ODS, a full request of type:
Requests without Monitor Log: APO Request or Terminated Request Generation.
I deleted the request from table: RSICCONT in debugging mode. The request was on green.
Now I have problems on activating the next requests in automatically. Manually it is working.
Request REQU_6DFXRA2VWJL3KYU44JPCWKXL2 no longer exists in DSO SVO_PPAB; system is inconsistent
Activation of M records from DataStore object SVO_PPAB terminated
Please help
Thank you
Ramona

Hi,
Refer the below links,
Re: Managing Request without Monitor Log: APO Request or Terminated Request Gen
http://ar.delhigovt.nic.in/ar1/Mission%20Conv%20RFP%20-%20Vol%20I-%20V4.0.pdf
http://help.sap.com/bp_bblibrary/600/documentation/R61_BPP_EN_DE.doc
Hope it helps you,
Regards,
Ravindra.

Monitor/capture tcp data between a server and client

Hi
I am doing a server/client TCP connection between my laptop and another computer running the server program. With my client program I am able to send commands to the server to which it reacts. However I do not know what the commands are (I just press a button in the client GUI and the command is sent), so my initial thought was that, maybe I was able to monitor/capture the strings/bytes/integers commands, which is send over the TCP/IP. There are only these two computers on the network, so no problem in other traffic there. FYI, they are connected with a wireless peer-to-peer connection.
My problem comes from the manufature of the software making a crabby manual, so really the commands in the manual, which I was supposed to send with my own TCP vi, are just impossible to understand, and don't get me started with their support :-)
SO, any suggestions if it is possible to capture what is sent over the TCP when I press a button in my client GUI?
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010

Matthew Williams wrote:
Wireshark, http://www.wireshark.org , will capture data off the network and sort/display/categorize.
I don't know how well it will work in a wireless environment, we usually use a wired hub (not switch).
Matt
Hi Matt
I have just tried Wireshark, I get a lot of data, so I just have to use a bit of time figuring out what is what, but good program to monitor the LAN connection also wireless. I can monitor all the packages between the client and server. It looks like there is a bunch of data just from keeping the connection active, but again I have to dig a bit deeper before I can say anymore:-)
MikeS81 wrote:
Hi SCMAJA,
another way is to build your own TCP/IP Server with LabView and receive with it the commands send with your client program.
Mike
Hi Mike
Yeah I tried that right now using the TCP Communicator - Passive example, unfortunately the connection between the client and server is kept alive using some commands, so the only command I can get to read is the connect command, because the client then refuses the connection because there is no "right" answer/repsonse from the server :-(
edit:
I just got in touch with the support, and got some of the commands to work. I had to make some crazy command with a header first, then size and last my command, all converted from DEC to HEX.. Not easy to figure out :-)
Message Edited by SCMAJA on 02-08-2008 04:29 PM
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010

Adfs/ls does not work while adfs/ls/idpinitiatedsignon works | There are no registered protocol handlers on path /adfs/ls/ to process the incoming request

Hello Experts
I am trying to configure ADFS 3.0 with Sharepoint 2013 and facing an issue with ADFS 3.0 url
When I try to access url https://<ADFS.domain.com>/adfs/ls - I face following error
Encountered error during federation passive request.
Additional Data
Protocol Name:
Relying Party:
Exception details:
Microsoft.IdentityServer.RequestFailedException: MSIS7065: There are no registered protocol handlers on path /adfs/ls/ to process the incoming request.
at Microsoft.IdentityServer.Web.PassiveProtocolListener.OnGetContext(WrappedHttpListenerContext context)
But When I try to access ADFS url - https://<ADFS.domain.com>/adfs/ls/idpinitiatedsignon
It works..
Is it normal behavior or something wrong here.
Please suggest.
Thanks

/adfs/ls/ is the endpoint for all "passive" protocols. a Plain GET to /adfs/ls wil complain (correctly) that the plain GET is not a correct SAML or WS-Fed message. You should only send correct messages to that EndPoint........
Paul Lemmers

Monitoring and Controling Incoming Requests for Chat with a Customer Service Agent

I've reviewed the suggested threads, but I do not see one that captures the essence of my query.
Bascially, I want to set up a generic Chat ID called "Customer Service".
Users would open a chat to this ID and ask their question.
On the backend a monitoring module would look for CHAT available CS Agents, and route the call to the first available.
IF no one is available the user would recieve a reply that there is X minutes wait and give them the option of waiting or getting a chat back when someone comes available.
Has anything like this been developed?

I haven't seen something exactly like that, but it sounds pretty close to IManExpert:
http://research.microsoft.com/en-us/projects/imanexpert/
That's worth checking out I'd say.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Monitor & capture incoming request.

Similar Messages

Maybe you are looking for